when i flash stock rom (a116)
http://forum.xda-developers.com/showthread.php?t=2596218
the wifi bars go grey but not immediately this happens after a certain while (4-5 hours) after i complete updating all apps
i toggle between airplane mod but still no effect the bars go white(gravitybox) for a some seconds and grey again
i have tried flashing the rom with plilz twrp and cwm too same problem
plz tell me what could be the problem thanks in advance
not facing the issue in any other rom
Related
Hi
I tried to read all the posts about wifi problems..didn't find a solution to my problem though.
I really want to install CyanogenMod 10 Unofficial - JRO03L ROM by Craig Gomez : http://forum.xda-developers.com/showthread.php?t=1803557
after flashing and rebooting, the wifi button remains gray and cannot be moved sideways
that happens with CM10 nightlies ROMs to
When I flashed EOS3 ROM, the wifi was OK
any help would be appreciated...
Thanks
Ronen
sorry if I'm nagging..it's just driving me crazy
no matter what I do, I can't get jellybean to work correctly on my prime
my prime is new, got it for my B-day 2 weeks ago
things I did so far:
1- unlocked with asus utility
2- got rooted (DebugfsRoot_Generic_v2.3)
3- flashed CWM v5.8.2.0
4- did nvflash successfully
5- changed CWM to TWRP v2.2.2.0
6- tried to flash cm10 over eos3 (only wiped cache and dalvik)
Nothing worked so far
on EOS3 I get wifi with no problem but I can't use the camera. every camera app I install is FC on me because it can't access the camera
on CM10 / Baked / Jellybro, the wifi button stays gray and there is a message on the screen "turning wifi on" and it stays like this
no problems with Android 4.0.3 Roms though
so you guys have any tips for me maybe? do you think replacing the kernel is a good idea?
rt321 said:
sorry if I'm nagging..it's just driving me crazy
no matter what I do, I can't get jellybean to work correctly on my prime
my prime is new, got it for my B-day 2 weeks ago
things I did so far:
1- unlocked with asus utility
2- got rooted (DebugfsRoot_Generic_v2.3)
3- flashed CWM v5.8.2.0
4- did nvflash successfully
5- changed CWM to TWRP v2.2.2.0
6- tried to flash cm10 over eos3 (only wiped cache and dalvik)
Nothing worked so far
on EOS3 I get wifi with no problem but I can't use the camera. every camera app I install is FC on me because it can't access the camera
on CM10 / Baked / Jellybro, the wifi button stays gray and there is a message on the screen "turning wifi on" and it stays like this
no problems with Android 4.0.3 Roms though
so you guys have any tips for me maybe? do you think replacing the kernel is a good idea?
Click to expand...
Click to collapse
I have the same problem. I use the TF201 few days and one day I turn it on and wifi does not work, the swith is grey and no way to turn on. This happens with several version of CM10 nghtlies. even he latest ones, I reflhash and wipe everything and is back again to work, but it happens again aftera few days.
Luis4911 said:
I have the same problem. I use the TF201 few days and one day I turn it on and wifi does not work, the swith is grey and no way to turn on. This happens with several version of CM10 nghtlies. even he latest ones, I reflhash and wipe everything and is back again to work, but it happens again aftera few days.
Click to expand...
Click to collapse
did you check the keyboard shortcut ?
Hi,
I have Galaxy S 2 with Cyanogenmod 10.1 android 4.2.2 installed.
I noticed that after flashing the ROM the WiFi icon is grey and not blue color. I would like to emphasize that i have internet and google apps download ability however there seems to be some apps that cannot send data. when WiFi is off and I am with using cellular data the cellular icon is blue.
I have tried the following with no success:
1. turn Wifi on/off and restart.
2. boot into recovery and wipe cash and dalvik.
any idea how to proceed?
Thanks
Edit: 24/12/2013 new info added after trying some options.
--------------------------------------------------------------------------------------
Hi,
After rooting and installing a custom rom and kernel, on my desire x, I found that my WiFi stops working.
It shows connected, but I cannot get any data transferred. The sync icon is shown in the status bar.
I have tried replacing the kernel and restored a nandroid backup of the stock rom, but still, these issue persists.
The only thing that helps when the issue occurs is turning off WiFi and then turning it on again.
I hope someone can help me fixing this problem.
Thanks Robert
http://forum.xda-developers.com/showthread.php?t=2239511
Download boot.img attached to OP
So after flashing Cyanogen 10.2 on my galaxy S3 (which previously had 4.2 jellybean stock rom installed) I had no service and an unknown IMEI and basband. I went into root browser and replaced the current EFS folder with one I Had backed up a couple of days ago which was 100% working fine. after a quick restart the signal bar at the top has no signal for about 30 seconds then gets signal for 10 seconds.If I go into setting and phone status during the period of signal I have network 02-uk network type-hsdpa and my phone number stays unknown and my imei is being shown correctly during both signal periods.
I cannot find a similar issue anywhere else at all and as im fairly new to all this I'm completely stuck.
I have a backup of my old rom (which wont flash due to status 7 error)
I 'd rather keep this rom if possible though.
Many thanks
jtaylor_94 said:
So after flashing Cyanogen 10.2 on my galaxy S3 (which previously had 4.2 jellybean stock rom installed) I had no service and an unknown IMEI and basband. I went into root browser and replaced the current EFS folder with one I Had backed up a couple of days ago which was 100% working fine. after a quick restart the signal bar at the top has no signal for about 30 seconds then gets signal for 10 seconds.If I go into setting and phone status during the period of signal I have network 02-uk network type-hsdpa and my phone number stays unknown and my imei is being shown correctly during both signal periods.
I cannot find a similar issue anywhere else at all and as im fairly new to all this I'm completely stuck.
I have a backup of my old rom (which wont flash due to status 7 error)
I 'd rather keep this rom if possible though.
Many thanks
Click to expand...
Click to collapse
fllash your stock rom via odin
Hello Guys,
i have one big Problem.
From time to time the Screen from my s3 freezes.
The Hardware Buttons are lightning and turns dark and if you touch, they are lightning again
The Status bar/notification bar is also displaying Motion (if you download files and it freezes)...
But the other Screen freezes, the only Thing you can do, is turn out battery restart... everything works fine...
i tested various Roms (whole Omega Series (v59., omni Rom v5, v34, AOKP Rom), Slim Rom), but with EVERY Rom the same..
it freezes sooner or later
is this a Hardware defect? what else can i do? i have wiped all data every flashing...
now my last test ist do Flash original sam Rom...