Hi I got SGP 321 LTE
I folowed the procedure up to 18,http://forum.xda-developers.com/xperia-tablet-z/development/root-sp321-ftf-10-5-1-0-283-t2873377
but it just couldnt get connected with the device, I have tried win 8.1,win 7 i XP it was everywhere the same, so I did flash recovery from the same page.
Enter TWRP and did backup to SD card.
Afterwords something really stupid , still in TWRP I did wiped all data on internal memory, factory reset.....and tried to instal CM11 with gapps ...
Guys the tablet is really dead, the screen will not go ON, only the LED is allive
flashtool says:
23/011/2014 13:11:22 - INFO - List of connected devices (Device Id) :
23/011/2014 13:11:22 - INFO - - USB\VID_0FCE&PID_0DDE\CB5A1RWK0G Driver installed : true
23/011/2014 13:11:22 - INFO - List of ADB devices :
23/011/2014 13:11:22 - INFO - - none
23/011/2014 13:11:22 - INFO - List of fastboot devices :
23/011/2014 13:11:22 - INFO - - CB5A1RWK0G
Is there any way to fix this? :crying:
korkis said:
Hi I got SGP 321 LTE
I folowed the procedure up to 18,http://forum.xda-developers.com/xperia-tablet-z/development/root-sp321-ftf-10-5-1-0-283-t2873377
but it just couldnt get connected with the device, I have tried win 8.1,win 7 i XP it was everywhere the same, so I did flash recovery from the same page.
Enter TWRP and did backup to SD card.
Afterwords something really stupid , still in TWRP I did wiped all data on internal memory, factory reset.....and tried to instal CM11 with gapps ...
Guys the tablet is really dead, the screen will not go ON, only the LED is allive
flashtool says:
23/011/2014 13:11:22 - INFO - List of connected devices (Device Id) :
23/011/2014 13:11:22 - INFO - - USB\VID_0FCE&PID_0DDE\CB5A1RWK0G Driver installed : true
23/011/2014 13:11:22 - INFO - List of ADB devices :
23/011/2014 13:11:22 - INFO - - none
23/011/2014 13:11:22 - INFO - List of fastboot devices :
23/011/2014 13:11:22 - INFO - - CB5A1RWK0G
Is there any way to fix this? :crying:
Click to expand...
Click to collapse
Have you tried holding volume + and power button, you should see one white flash keep holding and you should see three more flashes. If that worked you may be able to get into flash mode. (copied from another thread)
keijers said:
Have you tried holding volume + and power button, you should see one white flash keep holding and you should see three more flashes. If that worked you may be able to get into flash mode. (copied from another thread)
Click to expand...
Click to collapse
holding volume+ power button and pluq usb cable...3 white flashes and than different colour flash
and flastool says
23/046/2014 14:46:55 - INFO - Device connected in flash mode
23/047/2014 14:47:20 - INFO - Device disconnected
korkis said:
holding volume+ power button and pluq usb cable...3 white flashes and than different colour flash
and flastool says
23/046/2014 14:46:55 - INFO - Device connected in flash mode
23/047/2014 14:47:20 - INFO - Device disconnected
Click to expand...
Click to collapse
that's a start, try different ways. Like holding volume+ power untill 3 white flashes, then plug in to the usb. Or the other way around. It should work but you (maybe) have to try a lot of times.
keijers said:
that's a start, try different ways. Like holding volume+ power untill 3 white flashes, then plug in to the usb. Or the other way around. It should work but you (maybe) have to try a lot of times.
Click to expand...
Click to collapse
If i uderstood well and try what u say,,, what would happened? Will the tab boot up? Or will i be able to acces TWRP? Just to make sure where am i supposed to get...
Is there way how to flash nandroid backup in fastboot mode or flash mode thru the flashtool?
Sent from my One X using XDA Free mobile app
korkis said:
If i uderstood well and try what u say,,, what would happened? Will the tab boot up? Or will i be able to acces TWRP? Just to make sure where am i supposed to get...
Is there way how to flash nandroid backup in fastboot mode or flash mode thru the flashtool?
Sent from my One X using XDA Free mobile app
Click to expand...
Click to collapse
your tablet should get and stay in flash mode / fastboot, then you can flash the original firmware through flashtool. I don't think TWRP will ever startup...
keijers said:
your tablet should get and stay in flash mode / fastboot, then you can flash the original firmware through flashtool. I don't think TWRP will ever startup...
Click to expand...
Click to collapse
Awesome, thanks I made it work and my xperia is again alive, but now I got stuck at point 21. i did reboot the device after first flash, skip the set up, went to settings to enable usb debug, unknown sources i did even try to change MTP to MSC
and flastool says:
Device connected with USB debugging off
for 2011 devices line, be sure you are not in MTP mode
i have tried that 100 times and still no succes.... what am I doing wrong?
korkis said:
Awesome, thanks I made it work and my xperia is again alive, but now I got stuck at point 21. i did reboot the device after first flash, skip the set up, went to settings to enable usb debug, unknown sources i did even try to change MTP to MSC
and flastool says:
Device connected with USB debugging off
for 2011 devices line, be sure you are not in MTP mode
i have tried that 100 times and still no succes.... what am I doing wrong?
Click to expand...
Click to collapse
glad it's alive again! For that error at point 21 I can't help you. You've got to ask your question in that thread I guess!
korkis said:
Awesome, thanks I made it work and my xperia is again alive, but now I got stuck at point 21. i did reboot the device after first flash, skip the set up, went to settings to enable usb debug, unknown sources i did even try to change MTP to MSC
and flastool says:
Device connected with USB debugging off
for 2011 devices line, be sure you are not in MTP mode
i have tried that 100 times and still no succes.... what am I doing wrong?
Click to expand...
Click to collapse
ehh. What's exactly the problem?
Rootk1t said:
ehh. What's exactly the problem?
Click to expand...
Click to collapse
the problem is that eventhough the USB debug is ON, once the tablet goes OFF, the debug goes OFF as well...
25/054/2014 13:54:46 - INFO - Device connected with USB debugging on
25/054/2014 13:54:47 - INFO - Connected device : Sony Xperia Tablet Z
25/054/2014 13:54:47 - INFO - Installed version of busybox : N/A
25/054/2014 13:54:47 - INFO - Android version : 4.4.4 / kernel version : 3.4.0-perf-ge2ad053-00925-g7f21499 / Build number : 10.5.1.A.0.283
25/055/2014 13:55:26 - INFO - Selected Bundle for Sony Xperia Tablet Z (SGP321). FW release : 10.5.A.0.230. Customization : Customized_CE1
25/055/2014 13:55:26 - INFO - Preparing files for flashing
25/055/2014 13:55:28 - INFO - Please connect your device into flashmode.
25/055/2014 13:55:39 - INFO - Device disconnected
25/056/2014 13:56:25 - INFO - Device connected with USB debugging off
25/056/2014 13:56:25 - INFO - For 2011 devices line, be sure you are not in MTP mode
korkis said:
the problem is that eventhough the USB debug is ON, once the tablet goes OFF, the debug goes OFF as well...
25/054/2014 13:54:46 - INFO - Device connected with USB debugging on
25/054/2014 13:54:47 - INFO - Connected device : Sony Xperia Tablet Z
25/054/2014 13:54:47 - INFO - Installed version of busybox : N/A
25/054/2014 13:54:47 - INFO - Android version : 4.4.4 / kernel version : 3.4.0-perf-ge2ad053-00925-g7f21499 / Build number : 10.5.1.A.0.283
25/055/2014 13:55:26 - INFO - Selected Bundle for Sony Xperia Tablet Z (SGP321). FW release : 10.5.A.0.230. Customization : Customized_CE1
25/055/2014 13:55:26 - INFO - Preparing files for flashing
25/055/2014 13:55:28 - INFO - Please connect your device into flashmode.
25/055/2014 13:55:39 - INFO - Device disconnected
25/056/2014 13:56:25 - INFO - Device connected with USB debugging off
25/056/2014 13:56:25 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
does it prevent you from flashing?
Rootk1t said:
does it prevent you from flashing?
Click to expand...
Click to collapse
exactely :good:
Related
hey guys,
slowly i'm getting a little bit desperate actually i'm not sure, if my problem at the moment is flashtool or cyanogenmod 9.1 which brought ics on my phone or whatever. hope you can help me
i have an xperia ray and was on stock gingerbread 4.0.2.A.0.69 with baseband 8x55A-AAABQOAZM-203028D-66. but as the stock xperia included kraken facebook stuff, i finally wanted to get rid of it, so stock ics was no option. then i heard of cyanogenmod, which my friend had installed on his samsung galaxy s, and it worked perfectly there out of the box, so i wanted cm as well...
so on friday i installed cm9.1 stable from download.cyanogenmod.com/?type=stable&device=urushi following this guide: wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Ray:_Full_Update_Guide
everything worked fine except of no phone and mobile data connection. i researched, and it seems the xperia ray wants baseband 72 to work properly. so i installed latest flashtool 0.9.3.0, installed the proper drivers with flashtool-drivers.exe fomr flashtool folder "drivers" and tried. the second try i finally managed to get the ray's green light signaling flashmode, but flashtool disconnected in between, and on the ray one could see an image that looked like a glass with a green liquid in it... well, as flashtool had closed the connection, i waited a little bit and - as nothing happened - unplugged the usb cable and tried to reboot the ray fearing that i had bricked it. actually i didn't, the ray booted up, _and_ i had phone and mobile data connection! so i thought everything was fine even as my phone info still says "Baseband: 8x55A-AAABQOAZM-203028D-66". first i thought "anyways, everything works fine".
and so it seemed, but today as i was visting my parents, where i normally have a fine phone and mobile data connection, there was nearly nothing, and so i thought, i have to get bb72! but i don't get the ray into flashmode anymore
i read tons of guides, tried several variations of plugging and unplugging points of time... no way... somehow i also fear that my problem might be that flashtool wants the phone to have usb debugging and msc mode on, which i did, and when i start flashtool with the phone plugged in it says "Device connected with USB debugging on", but after the unplugging, shutting down the phone and connecting it again with the back-button pushed and holding it says "Device connected with USB debugging off" and "For 2011 devices line, be sure you are not in MTP mode". maybe that's because i don't get the device into "green light flashmode" or maybe (as i had read about meanwhile) because with ics msc isn't (fully) supported anymore?
so, can you please help me? any suggestions how i can get that baseband flashed on my phone? should i try it with the linux version of flashtool, or are there still any possibilities on windows (xp sp3)?
thx a lot, and by the way: phantastic work, that all you developing guys and helpers do for us!
my current system:
Phone: Xperia Ray (Urushi)
Android: 4.0.4 [ICS]
Baseband: 8x55A-AAABQOAZM-203028D-66
Kernel: 2.6.32.9-FXP [email protected] #1
Rom: Cyanogenmod 9.1.0-urushi
the flashtool log (looks always like this):
Code:
09/004/2012 18:04:47 - INFO - <- This level is successfully initialized
09/004/2012 18:04:47 - INFO - Flashtool Version 0.9.3.0 built on 2012-09-06 19:32:51
09/004/2012 18:04:47 - INFO - You can drag and drop ftf files here to start flashing them
09/004/2012 18:04:52 - INFO - Device connected with USB debugging on
09/004/2012 18:04:52 - INFO - Connected device : ST18
09/004/2012 18:04:52 - INFO - Installed version of busybox : BusyBox v1.20.2-cm9 bionic (2012-07-14 01:52 +0200) multi-call
binary.
09/004/2012 18:04:52 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-FXP
09/004/2012 18:04:52 - INFO - Root Access Allowed
09/005/2012 18:05:08 - INFO - Selected ST18i_8x55A-AAABQOAZM-203028G-72_baseband.ftf
09/005/2012 18:05:08 - INFO - Preparing files for flashing
09/005/2012 18:05:08 - INFO - Please connect your device into flashmode.
09/005/2012 18:05:14 - INFO - Device disconnected
09/006/2012 18:06:28 - INFO - Device connected with USB debugging off
09/006/2012 18:06:28 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/006/2012 18:06:38 - INFO - Device disconnected
09/006/2012 18:06:55 - INFO - Device connected with USB debugging off
09/006/2012 18:06:55 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/007/2012 18:07:08 - INFO - Device disconnected
thx a lot!
lyrabee
EDIT: hey again... i finally managed to get into the green light flashmode somehow, but flashtool still says:
09/006/2012 18:06:55 - INFO - Device connected with USB debugging off
09/006/2012 18:06:55 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/007/2012 18:07:08 - INFO - Device disconnected
so i looked around, if there is maybe any other way to get that baseband flashed on the system, and i found a thread called "[Q] Flashing .ftf file without flashtool?" that states, it was possible with fastboot: forum.xda-developers.com/showthread.php?t=1562110
so i'd like to try that. unfortunately that thread got stuck exactly at the point where it was about getting the right commands to flash certain files - e.g. for a baseband
what i did so far is: i renamed the baseband-ftf to zip and unzipped the zip. the following files are included:
adsp.sin
amss.sin
amss_fs_urushi.sin
apps_log.sin
fota0.sin
fota1.sin
loader.sin
plus a folder called META-INF, but i guess that one isn't needed.
to flash the boot.img, when installing cm9.1 the cm-guide posts that command:
fastboot -i 0xfce flash boot boot.img
the guy from the thread "[Q] Flashing .ftf file without flashtool?" posts those examples:
fastboot flash boot kernel.img
fastboot flash system system.img
fastboot flash userdata userdata.img
so, what are the commands to flash those "sins"? and do i have to use that "-i 0xfce" part, or is "fastboot flash" enough?
hope, someone can help me with that
thx a lot again!
lyrabee
Hi,
How are you trying to put your device in flashmode? If you do exactly what flashtool says, you wont get it.
You have to turn off your device, select flashmode in flashtool, press and hold Volume Down Key and then connect the phone to your PC.
The Back Key is not functioning for our Xperia, but Volume Down yes!
jomofer said:
Hi,
How are you trying to put your device in flashmode? If you do exactly what flashtool says, you wont get it.
You have to turn off your device, select flashmode in flashtool, press and hold Volume Down Key and then connect the phone to your PC.
The Back Key is not functioning for our Xperia, but Volume Down yes!
Click to expand...
Click to collapse
hi,
hm, i'll give it a try, but all the guides i found concerning the ray explicitly wrote about the back/return button like e.g. this one here talk.sonymobile.com/thread/24433
and as i wrote in my original post and in my edit i managed to get into green light mode with back/return button, but flashtool "just" didn't recognise that the ray anyways - despite it being connected with usb debugging and msc mode on - which is because of a problem concerning ics and msc mode i fear...
but i'll try it with volume down anyways. there can't happen more than before
is there anybody out there who possibly might help me with the fastboot solution?
lyrabee said:
hi,
hm, i'll give it a try, but all the guides i found concerning the ray explicitly wrote about the back/return button like e.g. this one here talk.sonymobile.com/thread/24433
and as i wrote in my original post and in my edit i managed to get into green light mode with back/return button, but flashtool "just" didn't recognise that the ray anyways - despite it being connected with usb debugging and msc mode on - which is because of a problem concerning ics and msc mode i fear...
but i'll try it with volume down anyways. there can't happen more than before
is there anybody out there who possibly might help me with the fastboot solution?
Click to expand...
Click to collapse
OMG! jomofer, you are my hero! it worked, it worked right away with the first try of using the volume down button :victory: i'm on baseband 72 now! thx thx thx again!!!11!
lyrabee
lyrabee said:
OMG! jomofer, you are my hero! it worked, it worked right away with the first try of using the volume down button :victory: i'm on baseband 72 now! thx thx thx again!!!11!
lyrabee
Click to expand...
Click to collapse
Also i dont know if it happens on the newer flashtool version but if you leave it connected to flashmode for too long it automatically breaks the connection. you should always drag'n'drop the ftf into flashtool and set alll that up and only enter flashmode when it tells you too after its all ready to go.
evilbarcode said:
Also i dont know if it happens on the newer flashtool version but if you leave it connected to flashmode for too long it automatically breaks the connection. you should always drag'n'drop the ftf into flashtool and set alll that up and only enter flashmode when it tells you too after its all ready to go.
Click to expand...
Click to collapse
hope, i won't have to flash around too often but thx for the tip
what i also found out accidentally yesterday, is the fact that msc actually works properly on ics/cm9.1, if you explicitly tell your device to connect as mass storage.
before the upgrade to ics i simply plugged the ray into the pc or mac, and the micro sdcard showed up like an additional volume. it didn't anymore after the upgrade. the device said something like "usb connected" in the info bar, but nothing more happened.
yesterday i checked that message in the info bar more accurately, even tapped on it, and tadaaa, the option was shown to "turn on usb storage": jayceooi.com/wp-content/uploads/2012/03/SGS2-ICS-USB-Mass-Storage.jpg
so easy and so far away simultaneously; unbelievable. anyways, i have "real" msc now again
I have two questions regarding flashtool. Before connect my phone i enable USB debugging.
When i try to connect my phone in flash mode, after few seconds it automatically reboot to flashmode. When it reboot i can see kernel boot logo. It keep rebooting to the flashmode. In addition to that, when the phone automatically reconnecting, flashtool display "USB debugging off". Why is that?
If i connect my phone after boot (normally), flashtool identify my phone WT19 as "ST17". I try to edit it in flashtool "Device>Edit", but it again identify my phone as "ST17". Why is that?
:crying:
Flash mode log:-
06/056/2012 18:56:07 - INFO - <- This level is successfully initialized
06/056/2012 18:56:07 - INFO - Flashtool Version 0.9.7.0 built on 2012-09-30 15:49:10
06/056/2012 18:56:07 - INFO - You can drag and drop ftf files here to start flashing them
06/056/2012 18:56:12 - INFO - Device disconnected
06/056/2012 18:56:38 - INFO - Device connected in flash mode
06/057/2012 18:57:19 - INFO - Device disconnected
06/057/2012 18:57:39 - INFO - Device connected with USB debugging off
06/057/2012 18:57:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
06/057/2012 18:57:40 - INFO - Device disconnected
06/057/2012 18:57:43 - INFO - Device connected with USB debugging off
06/057/2012 18:57:43 - INFO - For 2011 devices line, be sure you are not in MTP mode
06/057/2012 18:57:43 - INFO - Device disconnected
Click to expand...
Click to collapse
android addicts said:
I have two questions regarding flashtool. Before connect my phone i enable USB debugging.
When i try to connect my phone in flash mode, after few seconds it automatically reboot to flashmode. When it reboot i can see kernel boot logo. It keep rebooting to the flashmode. In addition to that, when the phone automatically reconnecting, flashtool display "USB debugging off". Why is that?
If i connect my phone after boot (normally), flashtool identify my phone WT19 as "ST17". I try to edit it in flashtool "Device>Edit", but it again identify my phone as "ST17". Why is that?
:crying:
Flash mode log:-
Click to expand...
Click to collapse
On which software version are you currently on? Can you flash a wt19i firmware now on your device? Or does this fail/gives you an error?
Did you flash the wrong kernel?
Try reflashing the stock kernel/rom.
Install drivers again for windows
Sent from my MANGO using Tapatalk 2
Hello all.
Please help me. I've committed a grave mistake. I bought my Xperia Ray about 2 months ago(It stopped showing up in retail stores, bought it online for a good price from a reputed online store, brand new.) After loads of thinking and looking at the pros and cons, and gaining some basic knowledge, I decided to root it today. I was following this guide: [Link] I'm new so XDA wont let me put it. Google Root Your Xperia Phone Without Voiding Warranty. Click the first link. Site is mytechencounters.wordpress.com.
Everything was going well. Sort of. Flashtool would show an error while trying to flash. I installed the drivers from the flashtool drivers folder, connected my phone in flash mode and started flashing. Then I realized that wipe data, wipe cache and wipe app log were checked. So I disconnected my phone. It was about 40-60 % done. Now it is not switching on. When I hold the power button, it gives that short vibration like it's supposed to before switching on, but it doesn't switch on. When I connect it, flashtool shows phone connected then disconnected again and again in its log. I hope I haven't bricked my phone. Please help me. Stock ROM 2.3.4. Build Number: 4.0.2.A.0.62
Please help me. My dad is away for a few days. If he returns and finds out, I'm dead! :crying:
Thanks in advance.
can you still get in to flashmode? take out the battery, wait for about 30 seconds and reconnect in flashmode (connect usb to pc first, the connect phone to usb while holding volume down) the LED light should turn green if you're in flashmode.
If you can enter flashmode, you can easily flash back the stock rom and kernel and have your phone running again.
eus4ni4 said:
can you still get in to flashmode? take out the battery, wait for about 30 seconds and reconnect in flashmode (connect usb to pc first, the connect phone to usb while holding volume down) the LED light should turn green if you're in flashmode.
If you can enter flashmode, you can easily flash back the stock rom and kernel and have your phone running again.
Click to expand...
Click to collapse
It does seem to get into flash mode. How do I make it return to stock?
****. Flash mode seems messed up. I looked around the web, and found out that I can go back to stock using PC Companion. I tried that but neither that nor anything else will work because the phone disconnnects and reconnects again and agian and again on its own. I tried other USB ports too but same problem. Oh God I'm doomed I've bricked my phone just after 2 months! :crying: :crying: :crying:
Androman117 said:
It does seem to get into flash mode. How do I make it return to stock?
Click to expand...
Click to collapse
Try this method.
Fix hard bricked ray
Wechy77 said:
Try this method.
Fix hard bricked ray
Click to expand...
Click to collapse
Thanks I'll try that out. The guy says that I have to uninstall PC Companion and Sony drivers before installing SEUS. Necessary? Because installing them was a pain. Also, SEUS will install the latest ROM. Does that mean ICS? I really don't want ICS right now. Stock 2.3.4 with Build Number: 4.0.2.A.0.62 is what I need.
Androman117 said:
Thanks I'll try that out. The guy says that I have to uninstall PC Companion and Sony drivers before installing SEUS. Necessary? Because installing them was a pain. Also, SEUS will install the latest ROM. Does that mean ICS? I really don't want ICS right now. Stock 2.3.4 with Build Number: 4.0.2.A.0.62 is what I need.
Click to expand...
Click to collapse
I don't bricked (yet) my ray, so i don't know. I think you must uninstall them, to get new drivers working. If SEUS (or SUS) flashed new rom and is ICS, then you can allways flash GB ftf any time you want via flashtool.
Or you can try this one!! Turn your brick into a smartphone
http://forum.xda-developers.com/showthread.php?t=1568792
zerorated24 said:
Or you can try this one!! Turn your brick into a smartphone
http://forum.xda-developers.com/showthread.php?t=1568792
Click to expand...
Click to collapse
I think this won't work, because it's necessary to flash after doing an ota update on unlocked bootloader...
@OP have you installed all drivers from flashtool -> drivers? Try it on another PC and connect the phone only after there is the popup to connect. Turn phone off, hold volume down and while holding it plug the usb, it will start flashing automaticly
If this won't work, bring it to a local shop or send it to sony and you can hope they will repair your software :good:
mihahn said:
I think this won't work, because it's necessary to flash after doing an ota update on unlocked bootloader...
@OP have you installed all drivers from flashtool -> drivers? Try it on another PC and connect the phone only after there is the popup to connect. Turn phone off, hold volume down and while holding it plug the usb, it will start flashing automaticly
If this won't work, bring it to a local shop or send it to sony and you can hope they will repair your software :good:
Click to expand...
Click to collapse
I guess I have to go to the service center after all. Let's give this one last shot though.
If you've followed this thread from the beginning, you know my phone wasn't booting. So, I installed SEUS and clicked update while my phone was connected. SEUS downloaded and installed the latest official ICS ROM. My phone started and was working alright(I anticipated all the lag and instability, no surprises there). Now, I tried to downgrade back to GB, specifically to the .42 build. My phone came with .62 out of the box. .42 since I was going to root, then do an OTA update to .62. There. A happy, rooted GB phone. Now, I have everything needed to flash it. Tried flashing it to GB .42 but alas. here is my log:
13/041/2012 00:41:47 - INFO - <- This level is successfully initialized
13/041/2012 00:41:47 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
13/041/2012 00:41:47 - INFO - You can drag and drop ftf files here to start flashing them
13/041/2012 00:41:54 - INFO - Device connected with USB debugging on
13/041/2012 00:41:54 - INFO - Connected device : ST18
13/041/2012 00:41:54 - INFO - Installed version of busybox : BusyBox v1.18.5 (2011-07-18 07:43:28 PDT) multi-call binary.
13/041/2012 00:41:54 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-perf / Build number : 4.1.B.0.587
13/042/2012 00:42:12 - INFO - Selected Xperia Ray (ST18i)_4.0.2.A.0.42_CE.ftf
13/042/2012 00:42:12 - INFO - Preparing files for flashing
13/042/2012 00:42:33 - INFO - Please connect your device into flashmode.
13/042/2012 00:42:39 - INFO - Device disconnected
13/043/2012 00:43:19 - INFO - Opening device for R/W
13/043/2012 00:43:20 - INFO - Start Flashing
13/043/2012 00:43:20 - INFO - Processing loader
13/043/2012 00:43:20 - ERROR - Drivers need to be installed for connected device.
13/043/2012 00:43:20 - ERROR - You can find them in the drivers folder of Flashtool.
13/043/2012 00:43:20 - INFO - Checking header
13/043/2012 00:43:20 - INFO - Ending flash session
13/043/2012 00:43:20 - ERROR -
13/043/2012 00:43:20 - ERROR - Error flashing. Aborted
13/043/2012 00:43:21 - INFO - Device connected in flash mode
13/044/2012 00:44:02 - INFO - Device disconnected
13/044/2012 00:44:21 - INFO - Device connected with USB debugging off
13/044/2012 00:44:21 - INFO - For 2011 devices line, be sure you are not in MTP mode
13/044/2012 00:44:37 - INFO - Device disconnected
13/044/2012 00:44:46 - INFO - Device connected in flash mode
13/044/2012 00:44:54 - INFO - Selected Xperia Ray (ST18i)_4.0.2.A.0.42_CE.ftf
13/044/2012 00:44:54 - INFO - Preparing files for flashing
13/045/2012 00:45:06 - INFO - Please connect your device into flashmode.
13/045/2012 00:45:08 - INFO - Opening device for R/W
13/045/2012 00:45:08 - INFO - Reading device information
13/045/2012 00:45:26 - INFO - Unable to read from phone after having opened it.
13/045/2012 00:45:26 - INFO - trying to continue anyway
13/045/2012 00:45:26 - INFO - Start Flashing
13/045/2012 00:45:26 - INFO - Processing loader
13/045/2012 00:45:26 - INFO - Checking header
13/045/2012 00:45:26 - INFO - Ending flash session
13/045/2012 00:45:26 - ERROR - Error in processHeader : 2 : The system cannot find the file specified.
13/045/2012 00:45:26 - ERROR - Error flashing. Aborted
13/045/2012 00:45:26 - INFO - Device disconnected
13/045/2012 00:45:43 - INFO - Device connected with USB debugging off
13/045/2012 00:45:43 - INFO - For 2011 devices line, be sure you are not in MTP mode
13/045/2012 00:45:53 - INFO - Device disconnected
Please. I'd rather not go to the Service Center. They'd ask questions and make me feel uncomfortable. My dad is not in station. Mom can't take me out she's not well. I'd rather try to fix all this mess myself. Help me.
Androman117 said:
I guess I have to go to the service center after all. Let's give this one last shot though.
Please. I'd rather not go to the Service Center. They'd ask questions and make me feel uncomfortable. My dad is not in station. Mom can't take me out she's not well. I'd rather try to fix all this mess myself. Help me.
Click to expand...
Click to collapse
According to the log it looks like you have connected phone before selecting the ftf, right? Select the ftf first and only after the popup appears, now hold volume up and while holding volume up connect phone with usb to pc!
Some users had problems, because they connected their phones too early...
mihahn said:
According to the log it looks like you have connected phone before selecting the ftf, right? Select the ftf first and only after the popup appears, now hold volume up and while holding volume up connect phone with usb to pc!
Some users had problems, because they connected their phones too early...
Click to expand...
Click to collapse
OH MY GOD OH MY GOD OH MY GOD DANKE MAY GOD BLESS YOU AND YOUR FAMILY THANK YOU SO MUCH! :good: :victory::laugh::highfive:
Also thanks to all others who replied. It's funny how such a small thing could cause problems. Thank you sir. I shall never forget you and your kindness.
Androman117 said:
OH MY GOD OH MY GOD OH MY GOD DANKE MAY GOD BLESS YOU AND YOUR FAMILY THANK YOU SO MUCH! :good: :victory::laugh::highfive:
Also thanks to all others who replied. It's funny how such a small thing could cause problems. Thank you sir. I shall never forget you and your kindness.
Click to expand...
Click to collapse
No problem mate! Any more questions just ask :good:
I hope everything works again!
When I try to boot my phone, the sony logo shows up and then nothing happens. I have CWM installed but pressing vol. down doesn't open the recovery. I tried to flash stock firmware using flashtool, but when I connect phone in flashmode/fastboot mode, the phone connects properly for about 10 seconds, then boots and again stuck at sony logo.
I know I'm supposed to connect only when flashtool says to connect the phone, and doing just that but still not working. Please help!
hoodakaushal said:
When I try to boot my phone, the sony logo shows up and then nothing happens. I have CWM installed but pressing vol. down doesn't open the recovery. I tried to flash stock firmware using flashtool, but when I connect phone in flashmode/fastboot mode, the phone connects properly for about 10 seconds, then boots and again stuck at sony logo.
I know I'm supposed to connect only when flashtool says to connect the phone, and doing just that but still not working. Please help!
Click to expand...
Click to collapse
It'sa good thing you forgot to mention what windows version you are on or ig you have used flashtool before on that PC so we can waste some time while you waiting for help.
Is your phone completely turned off when you are trying to connect in flash mode?
ChikeD said:
It'sa good thing you forgot to mention what windows version you are on or ig you have used flashtool before on that PC so we can waste some time while you waiting for help.
Is your phone completely turned off when you are trying to connect in flash mode?
Click to expand...
Click to collapse
Sorry. I'm on Windows 8, and yes, I've used flashtool before. I also tried to flash from a different pc with windows 7, and the same problem is there.
Yes, phone is completely turned off when trying to connect in flash mode.
Here's the log for flashtool:
29/050/2013 11:50:50 - INFO - <- This level is successfully initialized
29/050/2013 11:50:50 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
29/050/2013 11:50:55 - INFO - Device disconnected
29/051/2013 11:51:18 - INFO - Selected LT22i / 6.2.A.1.400 / India_acervenky
29/051/2013 11:51:18 - INFO - Preparing files for flashing
29/051/2013 11:51:18 - INFO - Please connect your device into flashmode.
29/059/2013 11:59:20 - INFO - Device connected in flash mode
29/059/2013 11:59:20 - INFO - Opening device for R/W
29/059/2013 11:59:24 - INFO - Start Flashing
29/059/2013 11:59:24 - INFO - Processing loader.sin
29/059/2013 11:59:24 - INFO - Checking header
29/059/2013 11:59:24 - INFO - Ending flash session
29/059/2013 11:59:24 - ERROR -
29/059/2013 11:59:24 - ERROR - Error flashing. Aborted
29/059/2013 11:59:25 - INFO - Device connected in flash mode
29/059/2013 11:59:26 - INFO - Device disconnected
29/000/2013 12:00:39 - INFO - Device connected in fastboot mode
29/000/2013 12:00:47 - INFO - Device disconnected
@hoodakaushal
I assumed you used it before, I asked if you have used it on that PC.
Try latest version of flashtool: http://www.flashtool.net/
See the FAQ for instructions to install on windows 8.
Also, USB 3 ports won't work, so use USB 2 ports or if you don't have those look at the BIOS for option to switch from xHCI to EHCI.
ChikeD said:
@hoodakaushal
Also, USB 3 ports won't work, so use USB 2 ports or if you don't have those look at the BIOS for option to switch from xHCI to EHCI.
Click to expand...
Click to collapse
Yeah, alreaady figured out that was the problem, tried USB 2 and worked fine. Thanks though! :good:
hoodakaushal said:
Yeah, alreaady figured out that was the problem, tried USB 2 and worked fine. Thanks though! :good:
Click to expand...
Click to collapse
Same problem. Even after using usb 2.0, it stays in flash mode for a few seconds then the sony logo starts in a loop again. Cant access cwm or flash mode. What should I do?
I "accidently" wiped my entire phone (dalvik,system,cache,data,internal) in twrp recovery because i was stuck in a bootloop and installed envi-rom 0.2B and the phone was able to boot normally and get the phone working again.
After getting my phone to turn on and working again i wasn't able to use flashtool and it looks like this:
05/041/2014 14:41:04 - INFO - Device connected with USB debugging on
05/041/2014 14:41:05 - INFO - Connected device : Sony Xperia Z2
05/041/2014 14:41:05 - INFO - Installed version of busybox : BusyBox v1.22.1-Stericson (2014-01-25 17:27:18 CET) multi-call binary.
05/041/2014 14:41:05 - INFO - Android version : 4.4.2 / kernel version : 3.4.0-perf-gef0bdc3 / Build number : 17.1.1.A.0.402
05/041/2014 14:41:05 - INFO - Checking root access
05/041/2014 14:41:05 - INFO - Root Access Allowed
05/041/2014 14:41:23 - INFO - Selected Bundle for Sony Xperia Z2 (D6503). FW release : 17.1.2.A.0.314. Customization : Generic Thailand
05/041/2014 14:41:23 - INFO - Preparing files for flashing
05/041/2014 14:41:24 - INFO - Please connect your device into flashmode.
05/041/2014 14:41:34 - INFO - Device disconnected
05/041/2014 14:41:59 - INFO - Device connected with USB debugging off
05/041/2014 14:41:59 - INFO - For 2011 devices line, be sure you are not in MTP mode
05/042/2014 14:42:11 - INFO - Flash canceled
LED blinks red,green, then turns off and flashtool doesn't detect it all.
Afterwards i need to use the power button and volume up key to turn off the phone and reboot.
I also tried via sony pc companion and the phone update itself to update and get 17.1.2.A.0.314 but that didn't work either.
Occasionally flashtool gets stuck on installftkit:
05/010/2014 14:10:37 - INFO - Checking root access
05/010/2014 14:10:43 - INFO - Root Access Allowed
05/010/2014 14:10:43 - INFO - Installing toolbox to device...
05/010/2014 14:10:43 - INFO - Pushing C:\Flashtool\custom\root\ftkit.tar to /data/local/tmp
05/010/2014 14:10:44 - INFO - Running installftkit as root thru sysrun
So i can't update by flashing, pc companion, or via phone. It would also work if anyone knows how i can update without flashing.
-Sorry for long post, just wanted to provide some background info.
Im having a similar issue!
Except i cant even boot up my phone, it shows sony logo, then goes to the boot animation sound but the screen is black.
I need to get my phone into flashmode for pcompanion to repair it, but when i try to, the led flashed red, green and off, very quickly.
Please can someone help? I can't use my new phone
ChrisRoxor said:
Please can someone help? I can't use my new phone
Click to expand...
Click to collapse
Connect Phone & PC and press the Volume Down button (see LEDs blink, then let go)
tonypro79 said:
Connect Phone & PC and press the Volume Down button (see LEDs blink, then let go)
Click to expand...
Click to collapse
According to the pc companion it should stay green and also it doesn't notice the phone connected at all :/
Yeah pressed those buttons and tried the options i found on other threads (re-installing drivers, using different pc, etc.) still nothing. I don't have the original wire that came with the phone but i doubt that has an impact.
It's the same with me
Make sure usb debugging mode is on for a start.
Pick the firmware you want to flash and let it prepear.
When it comes up saying please connect your phone. Make sure your phone is off. While plugging the USB into the phone hold down the vol down button. It will then connect and proceed to flash the firmware
Sent from my D6503 using XDA Free mobile app
JackHanAnLG said:
Make sure usb debugging mode is on for a start.
Pick the firmware you want to flash and let it prepear.
When it comes up saying please connect your phone. Make sure your phone is off. While plugging the USB into the phone hold down the vol down button. It will then connect and proceed to flash the firmware
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
The problem i have is the computer doesnt notice the phone when its in flashmode. It just keeps saying 'Connect device'
JackHanAnLG said:
Make sure usb debugging mode is on for a start.
Pick the firmware you want to flash and let it prepear.
When it comes up saying please connect your phone. Make sure your phone is off. While plugging the USB into the phone hold down the vol down button. It will then connect and proceed to flash the firmware
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry i don't think you noticed it was on in my post:
"05/041/2014 14:41:04 - INFO - Device connected with USB debugging on"
But yeah, apparently usb debugging turns off or something of the sort?
Check out this thread
http://forum.xda-developers.com/showthread.php?t=2635830
Have You installed the flashtool drivers????
erdemc said:
Check out this thread
http://forum.xda-developers.com/showthread.php?t=2635830
Have You installed the flashtool drivers????
Click to expand...
Click to collapse
Yeah from there and from the flashtool set already and it didn't work either time.
Has anyone found a fix to this yet?
I still can't flash my phone or update the software.
Dude if your rooting do it on the new root tool I did it and now I'm rooted
Sent from my D6503 using XDA Free mobile app
That's not the issue, I'm already on rooted unlocked bootloader. My problem is I can't update through phone, pc, or flashtool.
If it means anything the noise canceling isn't working anymore either so I think it might be that those original system files are gone. (for the noise canceling, flashing, and maybe other stock functions I haven't noticed)
Hope that helps anyone get an idea of the situation.
Any fix about this? I also have the same issue