Related
Please some one help me out with this issue
phone is not booting up normally after i tried to flash it using MAD team custom ROM and CM 7
i have attacthced the log file in CWM recovery folder on sd card please some one give me a hand this is my only phone and i dont want t to die
c4gopal said:
Please some one help me out with this issue
phone is not booting up normally after i tried to flash it using MAD team custom ROM and CM 7
i have attacthced the log file in CWM recovery folder on sd card please some one give me a hand this is my only phone and i dont want t to die
Click to expand...
Click to collapse
Install Odin on your PC, get the samsung drivers by installing Kies.
Hold down volume down key, middle of d-pad and power buttons all together while phone is off.
Put a different Rom .zip on your sd card using a PC.
Use Odin to flash clockworkmod to the phone, when fiinshed the phone will boot into cwm.
Use cwm to install the zip you put on the sd.
Reboot into the stable ROM.
GT-I5503 -FLASHED USING CUSTOM ROM -NOT WORKING help!!
brianmillar9 said:
Install Odin on your PC, get the samsung drivers by installing Kies.
Hold down volume down key, middle of d-pad and power buttons all together while phone is off.
Put a different Rom .zip on your sd card using a PC.
Use Odin to flash clockworkmod to the phone, when fiinshed the phone will boot into cwm.
Use cwm to install the zip you put on the sd.
Reboot into the stable ROM.
Click to expand...
Click to collapse
Thank you So much for your response.
I tried to flash using the Europa v 1.0 OPS file so it kinda advanced the things a little bit now i am seeing more steps after amss download on odin while flashing that Stock ROM!
It re boots the phone but not installing the rom - it fails telling
unable to format space f " data " something like this
I am still trying to fix ths up and i will also follow your instructions but i have few questions
1. which version of ODIN do u want me to use
2.shud i use a stock ROm or a CustoM rom ??
3.wich version of CWm shud i flash to the phone
Please respond in the same way you did I really appreciate your help Friend :good:
c4gopal said:
Thank you So much for your response.
I tried to flash using the Europa v 1.0 OPS file so it kinda advanced the things a little bit now i am seeing more steps after amss download on odin while flashing that Stock ROM!
It re boots the phone but not installing the rom - it fails telling
unable to format space f " data " something like this
I am still trying to fix ths up and i will also follow your instructions but i have few questions
1. which version of ODIN do u want me to use
2.shud i use a stock ROm or a CustoM rom ??
3.wich version of CWm shud i flash to the phone
Please respond in the same way you did I really appreciate your help Friend :good:
Click to expand...
Click to collapse
I use Odin Multi Downloader v4.34
The data partition not formating would be a cause for concern, if I was you I would try formating it with ClockWorkMod by doing a data wipe/factory reset.
If it was me I would use my computer to put CyanogenMod 7.2 .zip file on the SD (its stable and handy for getting things working)
Most stock ROMS won't flash through CWM.
So to summerise I would try this:
Go into download mode.
Link up with Odin and select your OPS file (make sure GTI5500 OR 5503 appears at top and not the word Android)
Select "One Package" in Odin options
Download a .zip of Clockworkmod for galaxy 5
select it as the One Package and don't touch the other boxes...
let clockworkmod flash into the phone and let it boot into it
now try the data wipe in clockworkmod
install the cyanogenmod zip from the sd and reboot
good luck
I've attached my Clockworkmod Zip file. I use it at least once a week so its good
[[[FIXED!!!]]] GT-I5503 -FLASHED USING CUSTOM ROM -NOT WORKING help!!
brianmillar9 said:
I use Odin Multi Downloader v4.34
The data partition not formating would be a cause for concern, if I was you I would try formating it with ClockWorkMod by doing a data wipe/factory reset.
If it was me I would use my computer to put CyanogenMod 7.2 .zip file on the SD (its stable and handy for getting things working)
Most stock ROMS won't flash through CWM.
So to summerise I would try this:
Go into download mode.
Link up with Odin and select your OPS file (make sure GTI5500 OR 5503 appears at top and not the word Android)
Select "One Package" in Odin options
Download a .zip of Clockworkmod for galaxy 5
select it as the One Package and don't touch the other boxes...
let clockworkmod flash into the phone and let it boot into it
now try the data wipe in clockworkmod
install the cyanogenmod zip from the sd and reboot
good luck
I've attached my Clockworkmod Zip file. I use it at least once a week so its good
Click to expand...
Click to collapse
c4gopal said:
See I am including the log file from the CWM folder on sd card this is wat it says : see if u can find out whats the issue from ths log please
Click to expand...
Click to collapse
IT GOT FIXED!!!!! FINALLY THANK YOU FOR YUR SUPPORT A LOT
Here's wat i did
1. i was using the wrong TASS ops File it was the same but name was too long i editied it ti EUROPAv1.0.ops ( <--------Very important )
2.Initially i flashed the stock ROM then the stuck point broke odin downloader continued after amss download and also automatically rebooted the phne
3. samsung recovered from boot loop but still gave an error telling cant format the space F: "data" when i rebooted normally it advanced till that shiny samsung logo after the animation while booting up phone never booted
4. then i tried to load recovery CWm mod to odin ..it was giving that famous error not able to mount sd-ext emmc failed
5. i DID data wipe and cache wipe din work ,i went to advanced> format /data >format /cache> format/system , > format/sd ext and i mounted all of these again using same menu
6. I Flashe MAD team CM 10 based cust ROm using CWM and rebooted without installing G apps ( which for me seems like a twist cause earlier i had flashed gapps every time i flashed the rom so this time i chose not to may be for a gud caus ** INSTINCT ** )
7. IT WORKED !!! phone started to boot with CYANOGEN LOGO i started dancing > everythings fine
8. I took a BACKUP!! which shudve been done in step 0 other wise which this story wud not be here today!! BACKUP IS VERY VERY IMP!!! :good::good::good::good::good::good:
THANK YOU very very much my friend :good::good::good::good:
c4gopal said:
IT GOT FIXED!!!!! FINALLY THANK YOU FOR YUR SUPPORT A LOT
Here's wat i did
1. i was using the wrong TASS ops File it was the same but name was too long i editied it ti EUROPAv1.0.ops ( <--------Very important )
2.Initially i flashed the stock ROM then the stuck point broke odin downloader continued after amss download and also automatically rebooted the phne
3. samsung recovered from boot loop but still gave an error telling cant format the space F: "data" when i rebooted normally it advanced till that shiny samsung logo after the animation while booting up phone never booted
4. then i tried to load recovery CWm mod to odin ..it was giving that famous error not able to mount sd-ext emmc failed
5. i DID data wipe and cache wipe din work ,i went to advanced> format /data >format /cache> format/system , > format/sd ext and i mounted all of these again using same menu
6. I Flashe MAD team CM 10 based cust ROm using CWM and rebooted without installing G apps ( which for me seems like a twist cause earlier i had flashed gapps every time i flashed the rom so this time i chose not to may be for a gud caus ** INSTINCT ** )
7. IT WORKED !!! phone started to boot with CYANOGEN LOGO i started dancing > everythings fine
8. I took a BACKUP!! which shudve been done in step 0 other wise which this story wud not be here today!! BACKUP IS VERY VERY IMP!!! :good::good::good::good::good::good:
THANK YOU very very much my friend :good::good::good::good:
Click to expand...
Click to collapse
Haha Wonderful
Your welcome, I did a dance too the first time I booted CyanogenMod after a brick
brianmillar9 said:
I use Odin Multi Downloader v4.34
The data partition not formating would be a cause for concern, if I was you I would try formating it with ClockWorkMod by doing a data wipe/factory reset.
If it was me I would use my computer to put CyanogenMod 7.2 .zip file on the SD (its stable and handy for getting things working)
Most stock ROMS won't flash through CWM.
So to summerise I would try this:
Go into download mode.
Link up with Odin and select your OPS file (make sure GTI5500 OR 5503 appears at top and not the word Android)
Select "One Package" in Odin options
Download a .zip of Clockworkmod for galaxy 5
select it as the One Package and don't touch the other boxes...
let clockworkmod flash into the phone and let it boot into it
now try the data wipe in clockworkmod
install the cyanogenmod zip from the sd and reboot
good luck
I've attached my Clockworkmod Zip file. I use it at least once a week so its good
Click to expand...
Click to collapse
Do u falsh it thru ODIN!! ?? coz i found out that thers no way to boot this i5503 into recovery mode using those 3-key combinations like other phones
c4gopal said:
Do u falsh it thru ODIN!! ?? coz i found out that thers no way to boot this i5503 into recovery mode using those 3-key combinations like other phones
Click to expand...
Click to collapse
Yep! There is no key combo for recovery on Galaxy5, if I need to boot recovery and cannot load the rom I just put it in download mode and use odin to reflash clockworkmod, then when its finished it auto boots into cwm and I do whatever I need to
Okay so recently I tried flashing a custom Cyanogen mod 10.1 to my S5830 yet I did not install ClockworkMod. My phone is now caught in a reboot loop where it gets stuck on the Samsung loading screen, and does not change, I tried entering recovery mode and "wipe data/factory reset" but it comes up with the error E:format_volume: rfs format failed on /dev/stl14, and when I try to wipe the cache partition i get the same error. I have also tried flashing stock standard drivers back to the phone, through Odin Multiloader, yet Odin does not pick up my phone due to being unable to boot my phone up.
For Odin I can load all the files yet I cannot start due to it not identifying my phone.
Any help regarding this issue would be immensely appreciated.
Ricckosx said:
Okay so recently I tried flashing a custom Cyanogen mod 10.1 to my S5830 yet I did not install ClockworkMod. My phone is now caught in a reboot loop where it gets stuck on the Samsung loading screen, and does not change, I tried entering recovery mode and "wipe data/factory reset" but it comes up with the error E:format_volume: rfs format failed on /dev/stl14, and when I try to wipe the cache partition i get the same error. I have also tried flashing stock standard drivers back to the phone, through Odin Multiloader, yet Odin does not pick up my phone due to being unable to boot my phone up.
For Odin I can load all the files yet I cannot start due to it not identifying my phone.
Any help regarding this issue would be immensely appreciated.
Click to expand...
Click to collapse
First, try to flash a stock rom using odin,should to work. You can´t install a custom rom with the stock revovery, you need CWM, so thar flash and stock rom.
Ricckosx said:
Okay so recently I tried flashing a custom Cyanogen mod 10.1 to my S5830 yet I did not install ClockworkMod. My phone is now caught in a reboot loop where it gets stuck on the Samsung loading screen, and does not change, I tried entering recovery mode and "wipe data/factory reset" but it comes up with the error E:format_volume: rfs format failed on /dev/stl14, and when I try to wipe the cache partition i get the same error. I have also tried flashing stock standard drivers back to the phone, through Odin Multiloader, yet Odin does not pick up my phone due to being unable to boot my phone up.
For Odin I can load all the files yet I cannot start due to it not identifying my phone.
Any help regarding this issue would be immensely appreciated.
Click to expand...
Click to collapse
Do you have the galaxy ace drivers on your pc? If not your pc can't connect to your ace.
To use odin it isn't necessary to boot up your phone as far I know. You have to go into the download mode and then use odin.
Sent from my GT-S5830 using xda app-developers app
Blackbox421 said:
Do you have the galaxy ace drivers on your pc? If not your pc can't connect to your ace.
To use odin it isn't necessary to boot up your phone as far I know. You have to go into the download mode and then use odin.
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I do have the drivers installed on my computer, yet when I enter download mode as soon as I connect my ace to my laptop it restarts into the bootup loop again. I have all the necessary files to initiate the stock reset, such as cooper.ops and the MD5 file, yet all I need is for Odin to register my phone When I connect my phone to my laptop in download mode I get a 5 second (give or take) window before it restarts itself.
Any pointers into which I could get Odin to connect to my phone would be much appreciated.
As I said I have all the necessary files but Odin just does not register my phone
Ricckosx said:
Okay so recently I tried flashing a custom Cyanogen mod 10.1 to my S5830 yet I did not install ClockworkMod. My phone is now caught in a reboot loop where it gets stuck on the Samsung loading screen, and does not change, I tried entering recovery mode and "wipe data/factory reset" but it comes up with the error E:format_volume: rfs format failed on /dev/stl14, and when I try to wipe the cache partition i get the same error. I have also tried flashing stock standard drivers back to the phone, through Odin Multiloader, yet Odin does not pick up my phone due to being unable to boot my phone up.
For Odin I can load all the files yet I cannot start due to it not identifying my phone.
Any help regarding this issue would be immensely appreciated.
Click to expand...
Click to collapse
Hi there,
Questions should go in Q&A section not in General section..Please have a look at the Forum-Rules AND don't repeat the mistake .. .. R.T.P.D
thank you,
p.007
puneeth.007 said:
Hi there,
Questions should go in Q&A section not in General section..Please have a look at the Forum-Rules AND don't repeat the mistake .. .. R.T.P.D
thank you,
p.007
Click to expand...
Click to collapse
I completly agree with you!!
REPORTED!
Hello every body :
I have a problem with my samsung galaxy mini 2 GT-S6500D ,
Firstly I have installed jellybean 4.2.2 custom rom , but I found some problem with it ( like white screen ) .
So I decided to flash back the official stock firmware 2.3.6 by odin ( I do that without entering recovery mode and wipe cache/data ) problem arise and I got the following :
1- My phone stucks at the samsung logo screen and reboots till I remove the battery to stop rebooting . I tried to reinstall the stock firmware again but still no solution .
2- I cannot get into recovery mode to wipe cache and factory reset , When I press the keys volume up + volume down + home key + power key , phone won`t start and thus no recovery mode menu .
3- I installed cwm-6.0.3.3-jena.tar.md5 custom recovery using odin but still cannot get into recovery mode .
ANY SOLUTION ,,,,, PLEASE HELP ????
regards
drali8888 said:
3- I installed cwm-6.0.3.3-jena.tar.md5 custom recovery using odin but still cannot get into recovery mode .
Click to expand...
Click to collapse
when you flash CWM only, untick reboot in Odin3 after flash is successful, power down by battery pull and enter CWM recovery by combo keys to do the wipes including dalvik cache in advanced and try again flashing
other solutions look below in My Android solutions.
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
when you flash CWM only, untick reboot in Odin3 after flash is successful, power down by battery pull and enter CWM recovery by combo keys to do the wipes including dalvik cache in advanced and try again flashing
other solutions look below in My Android solutions.
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
thanks , but i tried to flash CWM with unchecking auto reboot in Odin3 then pull battery BUT problem still present , I tried the other solution in the links BUT does not work for me
after odin flash reboot in stockrecovery and do a factory reset,reboot.
drali8888 said:
thanks , but i tried to flash CWM with unchecking auto reboot in Odin3 then pull battery BUT problem still present , I tried the other solution in the links BUT does not work for me
Click to expand...
Click to collapse
you need to go here and post or look for PIT file used with Stock ROM to flash your unit
The mini use tass .ops, not sure what is used for Mini 2 also read this thread
Check this out! You , YES! you are an " Android ". Not your phone but U.
-CALIBAN666- said:
after odin flash reboot in stockrecovery and do a factory reset,reboot.
Click to expand...
Click to collapse
I CANNOT get into recovery mode either stockrecovery or custom !
xsenman said:
you need to go here and post or look for PIT file used with Stock ROM to flash your unit
The mini use tass .ops, not sure what is used for Mini 2 also read this thread
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
I tried to flash the pit file in this thread http://forum.xda-developers.com/showthread.php?t=2226321 using Odin3 , but phone still stucks at samsung logo beside that I cannot access recovery mode , I looked for a solution in the link here but no one posted the correct solution
drali8888 said:
I tried to flash the pit file in this thread http://forum.xda-developers.com/showthread.php?t=2226321 using Odin3 , but phone still stucks at samsung logo beside that I cannot access recovery mode , I looked for a solution in the link here but no one posted the correct solution
Click to expand...
Click to collapse
ok, try the reboot tool from PC, I have a collection of recovery tool in My Android Collections, try them, if this fails
The galaxy Mini is using .ops file and not PIT file, so some Google search might help you to understand which version of Odin3 is used for
Mini 2
EDIT: ok checked and 6500D is using PIT, you can download from here
for ROMs you can download from here, (Download fresh one and try) when using PIT, re-partition must be checked also remove SIM card and EXT SD card, when flashing, battery must be charged.
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
ok, try the reboot tool from PC, I have a collection of recovery tool in My Android Collections, try them, if this fails
The galaxy Mini is using .ops file and not PIT file, so some Google search might help you to understand which version of Odin3 is used for
Mini 2
EDIT: ok checked and 6500D is using PIT, you can download from here
for ROMs you can download from here, (Download fresh one and try) when using PIT, re-partition must be checked also remove SIM card and EXT SD card, when flashing, battery must be charged.
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
Thanks man for your replies >> the problem was solved
I was butting my phone on usb cable it showed charging icon at this time i pressed the bottoms volume up + down + home + power it restarted in custom recovery mode , fortunately FINALLY i am in recovery mode :good::victory: then i did cache wipe and factory reset and my phone boot normally without problem
Everything that happened:
1) I rooted my GT-I9300 using ODIN v3.07 and CWM Recovery
2)I installed zip of Resurrection Remix Kitkat ROM for S3 using CWM
3) I hated it to the core!
4)I flashed the official stock ROM of 4.3 JB using ODIN
5) I realized that USB Debugging was off!
6) My phone gets stuck at the Samsung logo and doesn't even load into recovery mode!
7) It boots into download mode, I flash the 4.1.2 JB ROM for S3 using ODIN
8)The Samsung logo appears, disappears and then again appears! This goes on forever!!
9)This time it boots into Android Recovery and displays the error: E: failed to mount data (Invalid Argument) cant find /data
10) The phone restarts and continues the boot-looping!!
11) I try to restore it with Kies3 using Firmware Upgrade and Initialization
12) It upgrades the firmware to 4.3 JB but the things that happened in NO. 6 continue!
13) I realised its time for the xda people to help me out!!
Things I have:
1) My Bricked Samsung Galaxy S III (International) GT-I9300
2) USB Cable
3) A Windows 7 PC with 2GB RAM
4) An Internet Connection
Can someone please explain what has happened to my phone and what should I do to get it back on stock ROM?
Please help me as I dont want to buy a new phone!
Note: If you have 16 GB of I9300, apply this guide
I think you can restore your device via repartition with a PIT file. I uploaded Odin and PIT file that I use. You can download it from attachments
You should install this ROM via PIT file; http://samsung-updates.com/details/25147/Galaxy_S_3_International/GT-I9300/TUR/I9300XXUGNB6.html
Make sure select PIT file in Odin before installation.
I live in India. Can you suggest an INU or INS rom?
I flashed my phone with PIT file and (INS_I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1) 4.3 JB ROM. No Progress!!
stance_john said:
I flashed my phone with PIT file and (INS_I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1) 4.3 JB ROM. No Progress!!
Click to expand...
Click to collapse
Can you try install with my suggested ROM? If it will success, you can install your country's ROM anyway.
After installing it via PIT file, wait for boot. If it stuck in Samsung logo, remove battery,insert the battery again, boot into recovery and try to wipe data.
I'm saying again; Make sure select PIT file in Odin before installation.
Did you try a wipe data when you flashed second stock ROM?? When you got in recovery
Sent from my GT-I9300 using Tapatalk
f0xy said:
Did you try a wipe data when you flashed second stock ROM?? When you got in recovery
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Yes, I tried it. When i tried clear dalvik cache, it wasnt cleared. Instead I was took to the main menu of the CWM.
forumber2 said:
Can you try install with my suggested ROM? If it will success, you can install your country's ROM anyway.
After installing it via PIT file, wait for boot. If it stuck in Samsung logo, remove battery,insert the battery again, boot into recovery and try to wipe data.
I'm saying again; Make sure select PIT file in Odin before installation.
Click to expand...
Click to collapse
I installed the ROM with the PIT file but still no progress!
A new problem:
1) I went to the Samsung people expecting some help
2) And they did the most cruel thing on this earth!!! They said
"The binary counter says 4. That means you have flashed the ROM customly. This has void the warranty of your device. We cant help you if you have void your warranty. Sorry!"
I am using a gt i8552 Samsung galaxy grand Quattro , rooted with kingo root.
somewhere in an article I read supersu is better
so I tried installing supersu me pro
. But It showed I was not rooted with king/kingo root. so
I flashed supersu.zip from cwm the recovery I used.
anyway after some time it showed a message update binary
there were 2 options 1) normal.........2)cwm/twrp
obviously I chose normal .
it said installation failed
. I chose cwm recovery fro that moment on whenever I chose reboot system now it would reboot to cwm.
then after trying some options like shutdown(wouldn't work even if I waited 2hours )
reboot to bootloader(the only place else I could go other than cwm)
I started surfing the internet . I got confused in a bootloop and recovery loop . I also tried flashing fixpermissions.zip
I tried factory resed wiped cache partition dalvik chache formatted /cache istalled a custom rom(cosmic rom for gti8552)
. thinking that it is a bootloop :silly: . then I understood and I flashed stock recovery( http://d-h.st/hcA ) <<<<<<biggest mistake of me all
now I am in a boot loop I cannot access bootloader nor recovery . all I can see is samsung
update > when Samsung appered I pulled out the battery put it again I saw galaxy grand quatrro :happy: I got into stock recovery somehow and rebooted but the it didn't even show Samsung
update> I am able to access stock recovery anything I can do
Thanks to pbhogal98
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
that problem was solved but........ Now I am in one more problem..........
I want to install custom ROM (cosmic rom)
But I cannot as of I cannot enter the recovery I have flashed twrp. Anything new was the triangle with ! Below Samsung but I could not enter recovery
...........
So I also tried cwm , I could not enter that also..
So I need another way to install custom ROM or way to fix that recovery
I would really love some advice plz
go to sammobile (google it)
download firmware and odin
go to download mode and flash firmware by odin
thx but.....
tejus said:
go to sammobile (google it)
download firmware and odin
go to download mode and flash firmware by odin
Click to expand...
Click to collapse
see the problem is as told in description I factory reset resulting in the usb debugging is not checked so I can not use odin as it does not add the device.
I can now access stock recovery . any help
can I use adb to istall the firmware.if so then how
No need
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .
Using AP ? When I so connect it Odin does not show added any idea why then??
pbhogal98 said:
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .
Click to expand...
Click to collapse
:good: https://www.kingoapp.com/root-tutorials/how-to-flash-samsung-stock-rom-via-odin.htm
Thanks turns out I did not open Odin with admin
:good::victory:thank you I shall try now
Just a small problem when I download GT-I8552 firmware it just fails
http://www.sammobile.com/firmwares/confirm/45107/I8552XXANJ1_I8552ODDANG1_INU/
pshyco<me;68809915 said:
Just a small problem when I download GT-I8552 firmware it just fails
http://www.sammobile.com/firmwares/confirm/45107/I8552XXANJ1_I8552ODDANG1_INU/
Click to expand...
Click to collapse
Firmware downloaded but. Complete (write) operation failed
All threads completed (succeed 0/failed 1)
I just changed USB port and I'm done:good::laugh::laugh::good::highfive:
pbhogal98 said:
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .
Click to expand...
Click to collapse
Thank you very much buddy:highfive:
Try to select file in Odin if not able to select then there may be error in downloaded file.
Try downloading through IDM
Everything done turns out I was not using usb port 3
.0 now every single thing is back to normal
pshyco<me said:
Firmware downloaded but. Complete (write) operation failed
All threads completed (succeed 0/failed 1)
Click to expand...
Click to collapse
Use flashify
Y_A_S_H said:
Use flashify
Click to expand...
Click to collapse
Firmware was successful installed buddy I have a new problem see above
You should try usb jig if its works it might take you to download mode. And if you got stuck in cwm recovery loop just flash cwm again and make sure that you select auto reboot.