For GPS lock time and accuracy
##3282# in dialer, enter msl,
go into Advanced menu
LBS PDE IP- 66.174.95.132
PDE PORT- 7275
Edit- Settings don't stick, I'm an ass
Sent from above using Xparent Tapatalk Blue
This might be old info, but here it goes.
Code:
Alltel:
PDE IP Address = 205.142.19.100
PDE Port Number = 8888
PDE Transport = IP
Position Calculation = Mobile
------------------------------------------------------------
Bell:
PDE IP Address: 206.47.201.75
PDE Port number: 8888
PDE Transport: IP
Position Calculation: Mobile
------------------------------------------------------------
Telus:
PDE IP Address = 216.198.139.92
PDE Port Number = 8889
PDE Transport = IP
Position Calculation = Mobile
------------------------------------------------------------
Sprint:
PDE IP Address = 68.28.31.49
PDE Port Number = 5017
PDE Transport = IP
Position Calculation = PDE
Verizon:
PDE IP Address: 66.174.95.132
PDE Port number: 8888
PDE Transport: IP
Position Calculation: Mobile
What I put up is Verizon
I haven't found a thorough thread for epst tweaks, I'm'll put one together soon
Sent from above using Xparent Tapatalk Blue
Related
hi people this is my ever first post i think. Just wanna ask if i got the correct settings that i extracted from an original V3m Alltel. I worked on my Sprint mogul and changed it to Alltel ppc6800 rom. Now i changed all the settings so it would finally work on alltel network. Pls advice me if made a mistake on the setting, much appreciated.
Display NAM NAME GNPO
Home SID/ Home NID Home SID/ Home NID #1 0/65535
Home SID/ Home NID #1 0/65535
PRL PRL ID 30029
Security HDR AN AUTH User Id(long) %[email protected]
HDR AN AUTH Password(long) %E
PPP USER ID [email protected]
PPP PASSWORD alltel
M.IP SETTINGS Number of Profiles 5
Active User Profile Index 1
MIP_MODE Simple IP Only
MIP Registration Retries 1
MIP Registration Retry timeout 2000ms
MIP Pre-registration timeout 30
Mobile Node-HA Authentication Disable
Send a Registration Request Enable
Dormat Handoff Optimization Disable
M.IP Default Profile Enable Profile Enable
NAI [email protected]
MN HA SPI set Enable
MN HA SPI value (hex) 101
MN AAA SPI Set Enable
MN AAA SPI Value (hex) 3E2
Reverse Tunneling Preffered Enable
Home Address 0.0.0.0
Primary HA Address 0.0.0.0
Secondary HA Address 0.0.0.0
HA Shared secret secret
Public Key 0
MN Authenticator(Hex) 800100
M.IP profile 1 Enable Profile Enable
NAI [email protected]
MN HA SPI set Enable
MN HA SPI value (hex) 101
MN AAA SPI Set Enable
MN AAA SPI Value (hex) 3E2
Reverse Tunneling Preffered Enable
Home Address 0.0.0.0
Primary HA Address 0.0.0.0
Secondary HA Address 0.0.0.0
HA Shared secret secret
Public Key 0
MN Authenticator(Hex) 800100
M.IP profile 2 - 5 Enable Profile Enable
NAI
MN HA SPI set Enable
MN HA SPI value (hex) 0
MN AAA SPI Set Enable
MN AAA SPI Value (hex) 0
Reverse Tunneling Preffered Disable
Home Address 0.0.0.0
Primary HA Address 0.0.0.0
Secondary HA Address 0.0.0.0
HA Shared secret secret
Public Key 0
MN Authenticator(Hex) 800100
So here is my story, about 3 weeks ago I bought a touch pro off of ebay, that was for "pageplus"... well it turns out it was actually a sprint phone that had been flashed to pageplus. It worked for voice and text, but no data. The seller gave me a partial refund, and I figured I could get it to work. Anyway 3 weeks later I have it unlocked with Mightyrom 6 running and everything is great, except for some intermittent keyboard issues. I figure why not a hard reboot, see if its something that I had installed.Thats where everything when down hill. When It finished booting, it had jumped carriers to Verizon. If i tried to call with it all I got was verizons customer service. I've spent the last 6 hours trying to get this thing to work. My on going struggle can be read over at Howardsforum
http://www.howardforums.com/showthread.php?t=1638018
I've learned a lot, and in that way its been great, but at the end of the day I would prefer a working phone. I posted over here hoping that someone would have some advice.
I've decided to post all the settings from EPST in hopes that someone can set me strait
I will be using 1234567890 to represent my phone number, as I dont need any crank calls : )
I changed my MSL to 000000 with QPST
I am currently running MightyROM 6
My phone is a HTC Touch PRo
Display
NAM name SPCs
SCM 58
ESN (hex) *******
ESN (dec) *********
MSID 1234567890 (MY NUMBER)
Life Counter 2051
Life Timer 111hrs,24mins,35Sec
Life data RX 1184180957
Life Data TX 81933745
Software Version Mighty Rom
Firmware Version 1.03.03v
Hardware Version 0002
PRI version 1.47_003
PRU Checksum 5E2FFAF3
Refurbish status YES
Refurbish Date 31-Jul-2009
Manufacture Date 12-Feb-2009
Warranty Data code <NO Data>
A-Key
Authentication Key *blank*
Nam Settings
NAM Name SPCs
Mobile Directory Number 1234567890 (MY NUMBER)
MIN1 4567890
MIN2 123
MSID 1234567890 (MY NUMBER)
MCC 310
MNC 00
NMSI 001234567890
IMSI 310001234567890
True MIN1 4567890
True MIN2 123
True MSID 1234567890 (MY NUMBER)
True MCC 310
True MNC 00
True NMSI 001234567890
True IMSI 310001234567890
ACCOLC 7
CDMA Settings
A-sys Primary 283
B-sys Primary 384
A-sys Secondary 691
B-sys Secondary 777
MOB_TERM_FOR_HOME ENABLE
MOB_TERM_FOR_SID ENABLE
mOB_TERM_FOR_NID ENABLE
EVRC ENABLE
Home Page EVRC
Home Orig EVRC
Roam Orig Voice 13k
Home SID/Home NID
Home SID/NID #1 30/65535
Home SID/NID #(2-20) 0/0
Modem Settings
SLot Cycle Index 2
Preferred Serving Sys. Automatic
Preferred Mode Automatic
HDR Hybrid Preferred Enable
Clear all MRU entry No
PRL
Update PRL File
PRL ID 51807
PRL Capability (prl typ) IS-683C
PRL Capability (prefer only) Disable
PRL Capability (default roaming indicator) 68
Data Parameters
Packet Dial String #777
Rev. A Enable
Phone Directory
Emergency #1 911
Emergency #2 *911
Emergency #3 #911
*(all else blank)*
M.I.P Settings
Number of Profiles 6
Active user profile index 0
MIP MODE Mobile IP Preferred
MIP Registration Retries 2
MIP Registration Retry Timeouts 1750 ms
MIP Pre-Registration Imeout 0
Mobile Node-HA Authentication Enable
Send a Registration Request only in Use Disable
Dromant Handoff Optimization Enable
M.I.P. Default Profile
Enable Profile Enable
NAI [email protected]
MN HA SPI Set Enable
MN HA SPI Value (hex) 12C
MN AAA SPI Set Enable
MN AAA SPI Value (hex) 2
Reverse Tunneling Preferred Enable
Home address 0.0.0.0
Primary HA Address 255.255.255.255
Secondary HA Address 255.255.255.255
DMU public key (PKOID) 10
M.I.P Custom Profiles (all of them are the same)
Enable Profile Enable
NAI
MN HA SPI Set Enable
MN HA SPI Value (hex) 4D2
MN AAA SPI Set Enable
MN AAA SPI Value (hex) 4D2
Reverse Tunneling Preferred Enable
Home address 0.0.0.0
Primary HA Address 0.0.0.0
Secondary HA Address 0.0.0.0
DMU public key (PKOID) 0
There is always the possibility that I miss spelled something, If anyone sees any mistakes please let me know!!!
Joined: Apr 2010
Posts: 11
wahahahahhaha, she's alive, SHE IS ALIVE ... my phone finally works again, that was a rough 24 hours... the thing that I entered wrong was the MSID... who knew that phones had two phone numbers. Thanks to Ebay seller Kittywireless for their help. They didn't make a dime from me, and helped me find the answer.... One bonus of all this BS is it forced me to learn a lot of stuff about my phone, and now the Data is working
I have the same problem!!!
Could you happen to do me a huge favor. Im using a samsung rant from sprint and everything that happend to you happend to me!!! could you type out the data settings for you phone ie: User NAI, SPI MN-HA, SPI MN-AAA, Rev Tun Pref, Home Address, Primary HA-IP, Second HA-IP and your browser gateway ( you can get there by pressing ##3282#) thank you sososososo much!!!
I have a static ip cell phone, LTE service with public address: 25.25.25.25
USB-Tethered to an asus router
Router has WAN address of: 192.168.42.134,
Gateway and DNS is:192.168.43.129,
I Port-Forward 80,8080,554,etc... to Desktop Computer
Desktop Computer has HTTP Server and Darwin Streaming Server
Listening on 80,8080,554
Lan address is:192.168.1.2
I got the http server working by using an app on the cellphone called PortForarder https://play.google.com/store/apps/details?id=at.bherbst.net&hl=en
I forwarded port 8080 for incoming and 80 for target
...in settings I entered rmnet0 (25.25.25.25)for Public Interface (other choices were Lo(127.0.0.1),rndis0(192.168.42.129)
...for Target I entered router (192.168.42.134)
From the Outside (on a different internet connection)I'm able to access my html server with this http://25.25.25.25:8080
My Problem:
The app (portforwarder) is for non rooted phones, it will not let you forward ports lower than 1024,hence I cannot access my smtp stream on port 544
I'm trying to figure if the app uses iptables or routes traffic thru adb for forwarding
there are other portforwading apps for rooted phones that do use iptables (can allow to portforward lower than 1024) but I cannot get them to work with usb-tethering, it just may be I'm not understanding the correct iptable to write.
Can someone help me write an ip table that port forwards 544 from public interface(cell phone) to target host (router)
ca
I have a static ip cell phone, LTE service with public address: 25.25.25.25
USB-Tethered to an asus router
Router has WAN address of: 192.168.42.134,
Gateway and DNS is:192.168.43.129,
I Port-Forward 80,8080,554,etc... to Desktop Computer
Desktop Computer has HTTP Server and Darwin Streaming Server
Listening on 80,8080,554
Lan address is:192.168.1.2
I got the http server working by using an app on the cellphone called PortForarder https://play.google.com/store/apps/details?id=at.bherbst.net&hl=en
I forwarded port 8080 for incoming and 80 for target
...in settings I entered rmnet0 (25.25.25.25)for Public Interface (other choices were Lo(127.0.0.1),rndis0(192.168.42.129)
...for Target I entered router (192.168.42.134)
From the Outside (on a different internet connection)I'm able to access my html server with this http://25.25.25.25:8080
My Problem:
The app (portforwarder) is for non rooted phones, it will not let you forward ports lower than 1024,hence I cannot access my smtp stream on port 544
I'm trying to figure if the app uses iptables or routes traffic thru adb for forwarding
there are other portforwading apps for rooted phones that do use iptables (can allow to portforward lower than 1024) but I cannot get them to work with usb-tethering, it just may be I'm not understanding the correct iptable to write.
Can someone help me write an ip table that port forwards 544 from public interface(cell phone) to target host (router)
ca
Hi.
I have Wifi disconnections frequently on my phone (Xiaomi Redmi 5) and my researches lend me to focus on IPv6.
When my phone is connected to my home Wifi, I can see in the connections parameters that there are 2 local IP addresses : one IPv4 and another IPv6.
I disabled in my router settings the IPv6 management but my phone still has an IPv6 address.
What do I need to do (On the router or on the phone) to get rid of it?
Thanks!
Dude, i was just coasting down the information highway, not actually looking for this, but found it nonetheless, and coincidentally i go thru the same rather annoying events. Did you ever solve it? Care to share?
Yep, it appears to me that while using a VPN disconnections didn't occur anymore.
I don't understand why but if works.
I use this workaround since.
I'll give that a try! Thanks
I don't think it's a problem with ipv4 or ipv6. precisely if you don't establish an IP address it can't be connected to WiFi. maybe you can try resetting the Router you are using. CMIIW
@Double Jo
A Local IP address ( to be corect: Private IP address ) is an IP address that's reserved for internal use behind a router or other Network Address Translation (NAT) device, apart from the public. Private IP addresses are in contrast to public IP addresses, which are public and can't be used within a home or business network
The Internet Assigned Numbers Authority (IANA) reserves the following IP address blocks for use as private IP addresses:
10.0.0.0 to 10.255.255.255
172.16.0.0 to 172.31.255.255
192.168.0.0 to 192.168.255.255
As one can see those all are IPv4 addresses.