hi people this is my ever first post i think. Just wanna ask if i got the correct settings that i extracted from an original V3m Alltel. I worked on my Sprint mogul and changed it to Alltel ppc6800 rom. Now i changed all the settings so it would finally work on alltel network. Pls advice me if made a mistake on the setting, much appreciated.
Display NAM NAME GNPO
Home SID/ Home NID Home SID/ Home NID #1 0/65535
Home SID/ Home NID #1 0/65535
PRL PRL ID 30029
Security HDR AN AUTH User Id(long) %[email protected]
HDR AN AUTH Password(long) %E
PPP USER ID [email protected]
PPP PASSWORD alltel
M.IP SETTINGS Number of Profiles 5
Active User Profile Index 1
MIP_MODE Simple IP Only
MIP Registration Retries 1
MIP Registration Retry timeout 2000ms
MIP Pre-registration timeout 30
Mobile Node-HA Authentication Disable
Send a Registration Request Enable
Dormat Handoff Optimization Disable
M.IP Default Profile Enable Profile Enable
NAI [email protected]
MN HA SPI set Enable
MN HA SPI value (hex) 101
MN AAA SPI Set Enable
MN AAA SPI Value (hex) 3E2
Reverse Tunneling Preffered Enable
Home Address 0.0.0.0
Primary HA Address 0.0.0.0
Secondary HA Address 0.0.0.0
HA Shared secret secret
Public Key 0
MN Authenticator(Hex) 800100
M.IP profile 1 Enable Profile Enable
NAI [email protected]
MN HA SPI set Enable
MN HA SPI value (hex) 101
MN AAA SPI Set Enable
MN AAA SPI Value (hex) 3E2
Reverse Tunneling Preffered Enable
Home Address 0.0.0.0
Primary HA Address 0.0.0.0
Secondary HA Address 0.0.0.0
HA Shared secret secret
Public Key 0
MN Authenticator(Hex) 800100
M.IP profile 2 - 5 Enable Profile Enable
NAI
MN HA SPI set Enable
MN HA SPI value (hex) 0
MN AAA SPI Set Enable
MN AAA SPI Value (hex) 0
Reverse Tunneling Preffered Disable
Home Address 0.0.0.0
Primary HA Address 0.0.0.0
Secondary HA Address 0.0.0.0
HA Shared secret secret
Public Key 0
MN Authenticator(Hex) 800100
Related
Hi
I'm waiting for my unlock code to come through from Virgin. Once it does, I'd like to use my O2 sim in it - will I be able to set it up for O2Active etc? Also, once a month I'll need to put the virgin sim back in to get the license download for the telly - will I still be able to do that if I've changed the GPRS settings to O2?
Cheers
Did you ever get your Lobster working on O2?
I had a quick play this morning but it didn't work with trying to apply the settings I used on my Universal, but then not all the settings would fit.
I've seen there is a proxy setting too, must be something to do with that...
here are the o2 settings (lifted from modaco.com - thanks to smallfoot)
Contract
1) Start>Settings>Data Connections>Menu>Edit Connections
Dialup connection:
Description: O2 CSD WAP
Connects to: The internet
Phone number: +447712927927
User name: o2web
Password: password
Domain: blank
Proxy connection:
Description: O2 WAP proxy
Connects from: The Internet
Connects to: Wap Network
Proxy(nameort): 193.113.200.195:8080
Type: HTTP
Username:
Password:
GPRS Connection:
Description: O2 Internet
Connects to: The Internet
Access point: mobile.o2.co.uk
Username: o2web
Password: password
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
I.P address: blank
GPRS connection:
Description: O2 GPRS WAP
Connects to: The internet
Access point: wap.o2.co.uk
Username: o2wap
Password: password
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
I.P address: blank
GPRS connection:
Description: O2 MMS
Connects to: Secure WAP network
Access point: wap.o2.co.uk
Username: o2wap
Password: password
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
I.P address: blank
In the main data connections menu.
Internet connection: O2 Internet
Work connection : Automatic
WAP connection: O2 GPRS WAP
Secure wap connection: O2 MMS
Start>Messaging>Media Messages>Menu>Options>Account Setup>Media Messages
Menu- Edit connections - Menu- Add
Server: O2 MMS
Download Messsages: automatically
Outgoing message size: less than 100kb
Allowed message types: personal
Menu>Edit connections
Description: O2 MMS
MMSC Address: http://mmsc.mms.o2.co.uk:8002
Data Connection: Secure WAP network
Gateway: WAP 1.0 Gateway
I.P Address: 193.113.200.195
Port: 9201
In Internet explorer, Menu-Options-Connections
Untick 'automatically detect settings'
Make 'Select network: The Internet' or 'Select Network: WAP network'.
O2 PAYG
1) Start>Settings>Data Connections>Menu>Edit Connections
Dialup connection:
Description: O2 CSD WAP
Connects to: The internet
Phone number: +447712927927
User name: o2wap
Password: password
Domain: blank
Proxy connection:
Description: O2 WAP proxy
Connects from: The Internet
Connects to: Wap Network
Proxy(nameort): 193.113.200.195:8080
Type: HTTP
Username:
Password:
GPRS Connection:
Description: O2 GPRS Wap
Connects to: The Internet
Access point: payandgo.o2.co.uk
Username: payandgo
Password: password
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
I.P address: blank
GPRS connection:
Description: O2 MMS
Connects to: Secure WAP network
Access point: payandgo.o2.co.uk
Username: payandgo
Password: password
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
I.P address: blank
In the main data connections menu.
Internet connection: O2 CSD WAP
Work connection : Automatic
WAP connection: O2 GPRS WAP
Secure wap connection: O2 MMS
Start>Messaging>Media Messages>Menu>Options>Account Setup>Media Messages
Menu- Edit connections - Menu- Add
Server: O2 MMS
Download Messsages: automatically
Outgoing message size: less than 100kb
Allowed message types: personal
Menu>Edit connections
Description: O2 MMS
MMSC Address: http://mmsc.mms.o2.co.uk:8002
Data Connection: Secure WAP network
Gateway: WAP 1.0 Gateway
I.P Address: 193.113.200.195
Port: 9201
In Internet explorer, Menu-Options-Connections
Untick 'automatically detect settings'
Make 'Select network: Wap network' (for WAP over GPRS) or 'Select Network: The internet' (for WAP over CSD).
This was copied from another post.. but for the MMS part, u must go to Configurations which is among the menu such as settings, games etc.. right at the end ! and u'll find MMS settings.
Thanks, it was a bit of a ***** but I believe I managed to find the right place to put the right bits in the end
thanks for this thread but im still stuck i got wap internet working but mms just wont download. does anyone have a cab file for the settings that work.
thanks in advance
02 Cab for Monet
hoyler30589 said:
thanks for this thread but im still stuck i got wap internet working but mms just wont download. does anyone have a cab file for the settings that work.
thanks in advance
Click to expand...
Click to collapse
Cabs are available!!
Google for UK_Setup_ZD.Exe this has cabs for all uk operators on HTC devices. I use it on my monet when I want to change sims.
minidvr
Lobster user
minidvr said:
Cabs are available!!
Google for UK_Setup_ZD.Exe this has cabs for all uk operators on HTC devices. I use it on my monet when I want to change sims.
minidvr
Lobster user
Click to expand...
Click to collapse
Thank You, this will help alot
I just re-ROM'd my phone and now it looks like
my data plan isn't working.
I have a sprint 6850 hacked to VZW
The ROM I used was SROSLER's ROM.
I KNOW it resets the EPST settings, and I did get it back on the
Verizon network.
So it's not the ROM's fault.
But it now says "Cannot connect for unknown reason" when I try
to call for data.
When I dial *22899 all the phone does is beep twice and the call ends.
It doesn't look like it's writing the HA and AAA shared secret.
My Mip settings are:
Enable Profile: Enable
NAI: (my10digitphonenumber)@vzw3g.com
DUN NAI: (my10digitphonenumber)@dun.vzw3g.com
MN HA SPI Set: Enable
MN HA SPO Value (Hex):12C
MN AAA SPI Set: Enable
MN AAA SPI Value (Hex):0
Reverse Tunneling: Enable
Home Address 0.0.0.0
Primary HA: 255.255.255.255
Secondary HA: 255.255.255.255
HA Shared Secret:
AAA Shared Secret:
DMU public key(PKOID):10
MN Authenticator (Hex):0
Ideas?
I'm looking for EPST Settings for my Touch Pro to work in Sacramento area of california. So far, this is what I've got from Metro. They gave me a NAM Number which is 916-308-0677. MDN: 916######(My phone number) and home sid/nid 6503. They gave me another service programming number which is 587846 but I don't know where this goes.
the Phone has already been flashed to MetroPCS and when I dial 611 it takes me to metropcs. But when I call somebody, it says,"Welcome to American Roaming Network." So I'm assuming there's some settings that are incorrect. If you got a touch pro working on metro, please post some settings here. It would make a great tutorial as well.
Just put ##778# in dialer and view epst settings under "Display, NAM Settings, CDMA Settings, Home SID/Home NID, Modem Settings, PRL, Security, Data Parameters, Phone Directory, M.IP Settings, and M.IP Default Profile"
Please kindly post your settings here. It'll make a good tutorial and help alot of people. Thanks in advance.
the following are needed.
From "Display"
NAM Name
SCM
MSID
From "NAM Settings"
NAM Name
Mobile Directory Number
MIN1
Min2
MSID
MCC(Mobile County Code)
MNC(Mobile Network Code)
NMSI
IMSI
From "CDMA Settings"
A-Sys Primary
B-Sys Primary
A-Sys Secondary
B-Sys Secondary
MOB_TERM_FOR_HOME
MOB_TERM_FOR_SID
MOD_TERM_FOR_NID
EVRC Enabled
Home Page
Home Orig
Roam Orig
form "Home SID/Home NID"
Home SID/NID #1
from "Modem Settings"
Slot Cycle Index
Preferred Serving System
Preferred Mode
HDR Hybrid Preferred
Clear All MRU entry
from "Security"
HDR AN AUTH User ID
HDR AN AUTH Password
PPP USER ID
PPP PASSWORD
from "Data Parameters"
Packet Dial String
from M.IP Settings
Number of Profiles
Active User Profile Index
MIP_MODE
MIP Registration Retries
MIP Registration Retry
MIP Pre-Registration
Mobile Node-HA Auther
Send a Registration
Dormant Handoff
From "M.IP Default Profile"
Enable Profile
NAI
MN HA SPI Set
MN HA SPI Value
MN AAA SPI set
MN AAA SPI Value
Reverse Tunneling
Home Address
Primary HA Address
Secondary HA Address
HA Share Secret
AAA Shared Secret
DMU Public Key
MN Authenticator
Yes, it's a quiet a bit of work, but it'll create a perfect Guide for many people. So, someone please be brave and come forward and put some effort in to help complete this guide. Majority of these settings are available here on a very good thread but some key critical settings are not well defined. So, if anyone wanna take a shot at it, please come forward. Any help will be greatly appreciated. Thanks .
Many many thanks to the person who created this thread and posted those settings. I actually worked on my touch pro using those settings. Now, a final touch is needed.
http://forum.xda-developers.com/showthread.php?t=571190
There is a knowledgeable person in Sac named Kareem that flashes HTC phones over to metro...http://sacramento.craigslist.org/mob/1532028309.html he might be able to help...
He flashed several phones for me...
he wouldn't reply
I contacted him a few times but wouldn't reply. Also, he charges a lot. Its like 120 bucks he charges to program it. I can't afford that. I've already have it flashed and most settings in, but dunno if he will lemme know of that last ones. But again, I doubt he will help regarding this matter.
you need to get your MSID
So here is my story, about 3 weeks ago I bought a touch pro off of ebay, that was for "pageplus"... well it turns out it was actually a sprint phone that had been flashed to pageplus. It worked for voice and text, but no data. The seller gave me a partial refund, and I figured I could get it to work. Anyway 3 weeks later I have it unlocked with Mightyrom 6 running and everything is great, except for some intermittent keyboard issues. I figure why not a hard reboot, see if its something that I had installed.Thats where everything when down hill. When It finished booting, it had jumped carriers to Verizon. If i tried to call with it all I got was verizons customer service. I've spent the last 6 hours trying to get this thing to work. My on going struggle can be read over at Howardsforum
http://www.howardforums.com/showthread.php?t=1638018
I've learned a lot, and in that way its been great, but at the end of the day I would prefer a working phone. I posted over here hoping that someone would have some advice.
I've decided to post all the settings from EPST in hopes that someone can set me strait
I will be using 1234567890 to represent my phone number, as I dont need any crank calls : )
I changed my MSL to 000000 with QPST
I am currently running MightyROM 6
My phone is a HTC Touch PRo
Display
NAM name SPCs
SCM 58
ESN (hex) *******
ESN (dec) *********
MSID 1234567890 (MY NUMBER)
Life Counter 2051
Life Timer 111hrs,24mins,35Sec
Life data RX 1184180957
Life Data TX 81933745
Software Version Mighty Rom
Firmware Version 1.03.03v
Hardware Version 0002
PRI version 1.47_003
PRU Checksum 5E2FFAF3
Refurbish status YES
Refurbish Date 31-Jul-2009
Manufacture Date 12-Feb-2009
Warranty Data code <NO Data>
A-Key
Authentication Key *blank*
Nam Settings
NAM Name SPCs
Mobile Directory Number 1234567890 (MY NUMBER)
MIN1 4567890
MIN2 123
MSID 1234567890 (MY NUMBER)
MCC 310
MNC 00
NMSI 001234567890
IMSI 310001234567890
True MIN1 4567890
True MIN2 123
True MSID 1234567890 (MY NUMBER)
True MCC 310
True MNC 00
True NMSI 001234567890
True IMSI 310001234567890
ACCOLC 7
CDMA Settings
A-sys Primary 283
B-sys Primary 384
A-sys Secondary 691
B-sys Secondary 777
MOB_TERM_FOR_HOME ENABLE
MOB_TERM_FOR_SID ENABLE
mOB_TERM_FOR_NID ENABLE
EVRC ENABLE
Home Page EVRC
Home Orig EVRC
Roam Orig Voice 13k
Home SID/Home NID
Home SID/NID #1 30/65535
Home SID/NID #(2-20) 0/0
Modem Settings
SLot Cycle Index 2
Preferred Serving Sys. Automatic
Preferred Mode Automatic
HDR Hybrid Preferred Enable
Clear all MRU entry No
PRL
Update PRL File
PRL ID 51807
PRL Capability (prl typ) IS-683C
PRL Capability (prefer only) Disable
PRL Capability (default roaming indicator) 68
Data Parameters
Packet Dial String #777
Rev. A Enable
Phone Directory
Emergency #1 911
Emergency #2 *911
Emergency #3 #911
*(all else blank)*
M.I.P Settings
Number of Profiles 6
Active user profile index 0
MIP MODE Mobile IP Preferred
MIP Registration Retries 2
MIP Registration Retry Timeouts 1750 ms
MIP Pre-Registration Imeout 0
Mobile Node-HA Authentication Enable
Send a Registration Request only in Use Disable
Dromant Handoff Optimization Enable
M.I.P. Default Profile
Enable Profile Enable
NAI [email protected]
MN HA SPI Set Enable
MN HA SPI Value (hex) 12C
MN AAA SPI Set Enable
MN AAA SPI Value (hex) 2
Reverse Tunneling Preferred Enable
Home address 0.0.0.0
Primary HA Address 255.255.255.255
Secondary HA Address 255.255.255.255
DMU public key (PKOID) 10
M.I.P Custom Profiles (all of them are the same)
Enable Profile Enable
NAI
MN HA SPI Set Enable
MN HA SPI Value (hex) 4D2
MN AAA SPI Set Enable
MN AAA SPI Value (hex) 4D2
Reverse Tunneling Preferred Enable
Home address 0.0.0.0
Primary HA Address 0.0.0.0
Secondary HA Address 0.0.0.0
DMU public key (PKOID) 0
There is always the possibility that I miss spelled something, If anyone sees any mistakes please let me know!!!
Joined: Apr 2010
Posts: 11
wahahahahhaha, she's alive, SHE IS ALIVE ... my phone finally works again, that was a rough 24 hours... the thing that I entered wrong was the MSID... who knew that phones had two phone numbers. Thanks to Ebay seller Kittywireless for their help. They didn't make a dime from me, and helped me find the answer.... One bonus of all this BS is it forced me to learn a lot of stuff about my phone, and now the Data is working
I have the same problem!!!
Could you happen to do me a huge favor. Im using a samsung rant from sprint and everything that happend to you happend to me!!! could you type out the data settings for you phone ie: User NAI, SPI MN-HA, SPI MN-AAA, Rev Tun Pref, Home Address, Primary HA-IP, Second HA-IP and your browser gateway ( you can get there by pressing ##3282#) thank you sososososo much!!!
For GPS lock time and accuracy
##3282# in dialer, enter msl,
go into Advanced menu
LBS PDE IP- 66.174.95.132
PDE PORT- 7275
Edit- Settings don't stick, I'm an ass
Sent from above using Xparent Tapatalk Blue
This might be old info, but here it goes.
Code:
Alltel:
PDE IP Address = 205.142.19.100
PDE Port Number = 8888
PDE Transport = IP
Position Calculation = Mobile
------------------------------------------------------------
Bell:
PDE IP Address: 206.47.201.75
PDE Port number: 8888
PDE Transport: IP
Position Calculation: Mobile
------------------------------------------------------------
Telus:
PDE IP Address = 216.198.139.92
PDE Port Number = 8889
PDE Transport = IP
Position Calculation = Mobile
------------------------------------------------------------
Sprint:
PDE IP Address = 68.28.31.49
PDE Port Number = 5017
PDE Transport = IP
Position Calculation = PDE
Verizon:
PDE IP Address: 66.174.95.132
PDE Port number: 8888
PDE Transport: IP
Position Calculation: Mobile
What I put up is Verizon
I haven't found a thorough thread for epst tweaks, I'm'll put one together soon
Sent from above using Xparent Tapatalk Blue