hi to all. please help.
But now my phone screen is black and i can't go to the Download Mode or Recovery mod and etc.
I cant Power on my phone!
Just when connect it with usb cable to my PC (Win xp), and run Odin, The Yellow rectangle appear in odin and when i want to flash it, odin show it:
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
is stoped on setup conection.
Please help me, i know i have some problem, because my language is not English!
I hope you understand me.
my phone is samsung galaxy gio.thanx
what happend with your phone?? was it rooted how did you get black screen? please mention
I tried with ClockWorkMod-6.0.4.7-gio and after reboot was not open. screen does not light in any way. I tried with usb jig and as no response. In odin sees connected but when I do make recovery remains blocked as mentioned above.
First make sure that your device is connectrd to your pc.
make sure you have installed this device before in same pc means you have drivers installed.
now download and open ADB driver installer is your device showing here? or download and open adb shell and type adb devices
is your device listed here??
which version of odin you are using?
flash rom needs download mod open in your device.
whuch rom you are using custom or stock
use stock rom to flash if available for your device.
or care will your last hope...
If I had installed diver for samsung galaxy s5660 odin does not see in 4.42 that I use and I show that it is connected. But as I said at the the setup hangs and freezes. I left and jump at everything froze and nothing goes on .I used and rum stock ie S5660XXKPA and it remains frozen. I do not know what his can do so I can switch the setup can complete the update.
This is called hard brick
As i know you cant flash rom without opening download mode in your device
as you cant have all the factory softwares and data cable to connect your motherboard properly to your pc and flash everything.
All i have to do is suggest you to contact Samsung care...
yes is hard brick. thanx.
Eventually there is a solution to this problem. one can revive this phone to function . ? much please help me . a tutorial. Thank you very much .
any idea to resolve gio?
nobody, not ist software this device as hard bricked?
Related
I downloaded the firmware for my ace..
S5830ZSKPD
But it has only one file.. So i put it in the one file package option..
Yes I've put the cooper thing all.. NOW
Im stuck..
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
What should I do ? Put the firmware under CSC or what ? Urgent please.
Did you boot into Download Mode before connecting to the PC?
Vol down + Home Button + Power Button
Tried doing it. But it won't show up..
Why!!!! Argh
what do u mean it wont show up? download mode is it?
Yah. I tried Vol_down+Home+Power_Btn
Still cannot. Is there other way ?
Like ADB push or something ?
crankyboy said:
Yah. I tried Vol_down+Home+Power_Btn
Still cannot. Is there other way ?
Like ADB push or something ?
Click to expand...
Click to collapse
-Take out your battery
-Hold the combinations (Home+Power+Volume Down)
-Put in your battery
-It should boot into Download Mode
Just helping a fellow local
Maybe I brick my phone ?
Meowww
crankyboy said:
Maybe I brick my phone ?
Meowww
Click to expand...
Click to collapse
It's kinda impossible y'know ?
It didn't even flash, you could probably boot it up.
Anyway be specific. What rom are you already on? What is the name of the file you place on one package?
i'm trying to fix brickes sga
but odin stucks on this
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
i tryed to:
change usb, computer, usb port
take off sim, sd
but it's still stuck on that ???/
Is your ace booting into download mode?
Sent from my GT-S5830 using my hands
tomb20 said:
Is your ace booting into download mode?
Sent from my GT-S5830 using my hands
Click to expand...
Click to collapse
yes, and the odin detects it
but on the phone, nothing shows ther (screen is black)
Try doing this:
Power off
Pull battery
Plug into pc
Hold home ,power,vol-down,
Insert battery.
Sent from my GT-S5830 using my hands
tomb20 said:
Try doing this:
Power off
Pull battery
Plug into pc
Hold home ,power,vol-down,
Insert battery.
Sent from my GT-S5830 using my hands
Click to expand...
Click to collapse
yeah i doing it around 6 hours again and agian
any other solutions ????
How did you brick it? I'd you can't get into download mode then it might be hardbricked.
Take it to a Samsung sevice centre and tell them it just stopped working, act all innocent like you don't even know what odin is.
Sent from my GT-S5830 using my hands
tomb20 said:
How did you brick it? I'd you can't get into download mode then it might be hardbricked.
Take it to a Samsung sevice centre and tell them it just stopped working, act all innocent like you don't even know what odin is.
Sent from my GT-S5830 using my hands
Click to expand...
Click to collapse
1. Installed Rom Manager, choose diffrent phone
2. In my country there no samsung centre (
nyamka.9761 said:
1. Installed Rom Manager, choose diffrent phone
2. In my country there no samsung centre (
Click to expand...
Click to collapse
Bad move man . You're probably screwed .
Why don't these people read the newbie guide ?
nyamka.9761 said:
1. Installed Rom Manager, choose diffrent phone
2. In my country there no samsung centre (
Click to expand...
Click to collapse
Don't use rom manager, it hardbricks ace.
Did you buy it straight from a carrier? Take it to them, don't mention anything root!
Sent from my GT-S5830 using my hands
Hello
Last week I became my Star x26i. Its quite a very good phone, but because of WiFi and Battery issues i tried to update it to a newer version, like in this tutorial :
http://forum.xda-developers.com/showthread.php?t=1680338
So I used a program, calles SPmultiPortFlashDownloadProject
Everything went fine, but after the program erased the emmc Windows tried to install a new driver and failed. The program stopped and now the phone cant boot anymore (understandable with an formatted eemc...) The Pc detects the phone anyway, first as an unknown device and after installing a new chipset driver as "MediaTek DA USB VCOM Port (COM6)" If I try to reflash with the same program it gives me following issue like on this picture: http://imageshack.us/f/856/erroroly.png/ (Error: No Bootrom USB Port was found! COM6 is not a Bootrom (preloader) USB Port. Auto polling Number0.
Are there any Chances to rescue this device or is it totally bricked? Thanks in advance...
Product Name : Lenovo A660
Hardware : MT6577
I do flashing with SP_Flash_Tool_v3.1224.01 for this device . But never successfully processed . Though I have used the stock rom I had a previous backup of the other similar device . When running on a flashing red bar reaches 100 % , always an error with the message : BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) .
I have tried many times some existing solutions in this forum . But still there is no way I can get in to flashing on the device . Here are the steps I did in when flashing with tools :
1 . Turning off and unplugging devices battery (I also have tried to flash with battery but failed)
2 . Plug in USB cable to the devices ( but not to the PC )
3 . Installing the USB VCOM driver for MTK MTK6577
4 . Running SP Flash Tool and enter Scatter File
5 . Click the "Download" button on the SP Flash Tools
6 . Plug in the USB cable from the devices to the computer while pressing the volume up button .
7 . Looking into the computer screen flashing process is happening .
Initially there is a process with a red bar marks . Device driver is detected as well ( seen in the device manager ) . When the bar reaches 100 % in the red , the device is detected by the DA USB VCOM port ( COM 28 ) . But immediately displays an error message BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) and the process of flashing the device failed .
I can't even boot the phone anymore.
Can someone help me ?
Balafenn said:
Product Name : Lenovo A660
Hardware : MT6577
I do flashing with SP_Flash_Tool_v3.1224.01 for this device . But never successfully processed . Though I have used the stock rom I had a previous backup of the other similar device . When running on a flashing red bar reaches 100 % , always an error with the message : BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) .
I have tried many times some existing solutions in this forum . But still there is no way I can get in to flashing on the device . Here are the steps I did in when flashing with tools :
1 . Turning off and unplugging devices battery (I also have tried to flash with battery but failed)
2 . Plug in USB cable to the devices ( but not to the PC )
3 . Installing the USB VCOM driver for MTK MTK6577
4 . Running SP Flash Tool and enter Scatter File
5 . Click the "Download" button on the SP Flash Tools
6 . Plug in the USB cable from the devices to the computer while pressing the volume up button .
7 . Looking into the computer screen flashing process is happening .
Initially there is a process with a red bar marks . Device driver is detected as well ( seen in the device manager ) . When the bar reaches 100 % in the red , the device is detected by the DA USB VCOM port ( COM 28 ) . But immediately displays an error message BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 ) and the process of flashing the device failed .
I can't even boot the phone anymore.
Can someone help me ?
Click to expand...
Click to collapse
Its because may be you are flashing a wrong preloader..
Is there any fix to get the preloader back on the device?
hi guys I'm new in the forum,
I have a problem whith my LG F60(D390N) , it's bricked,(I had installed the wrong custom ROM) now I can't go to recovery or download mode ,
the phone don't start up , (there's no problem whith the battery or charger,
when I connect the phone to the PC i see only QHSUSB_BULK, please guys help me :crying: ,
the assistence it's very expensive.
Im in the same boat.
Installed first a stock 5.0.1 over the kitkat, everithyng went fine but after that installd a wrong CWM recovery
Now when I turn on my phone, its vibrate infinitely, and nothing happen. Black screen. When I put in-out-in my usb cable, screen turns on, and phone says: DBI Apps Watchdog Reset!
DemiGod Crash Handler : DBI Apps Watchdog Reset!
Please do following action.
1) Dload Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration.
----------------------------------------------------------------------------
Board Info
rev. : 1.1, serial : 003bwff********
secure boot : disabled
--------------------------------------------------------------------------
Jump to Dload Mode.
I have no idea how I can take it back into life :S
I find it in device manager at COM ports : LGE AndroidNet USB Serial Port (COM6)
and at modems : LGE AndroidNet USB Modem