Hi guys, I have a problem with my iphone clone 5c, marked ALPS. After a misguided attempt to reset the phone from recovery, I found the phone locked. At that point, surfing the web I found a rom on NEEDROM, and I tried to flash it with flash tool, an operation that I repeated 2 times, but even if flash tool give me successful, when I try to turn on the phone, the screen remains completely black but you hear the sound of release. How do I proceed?
Thanks in advance to anyone who can help me
Related
Right , Hello
Greetings from Ireland and to any Irish people on this, Hows it going ?
Bought this Goophone i5 from aliexpress there last September, http://www.aliexpress.com/snapshot/262984369.html
Everything was fine until the other day when the screen calibration started to act funny so after many resets and the rest it still didnt fix it I thought to myself right ill try flashing a new ROM to it, couldn't be that hard ? right ?.. I've done this with PSP's many moons ago and thought things would be grand.
So I read loads of tutorials and forums here and decided to give it a go.
I used the flash tools from this thread
http://forum.xda-developers.com/showpost.php?p=43678784&postcount=46
and this rom
http://pan.baidu.com/share/link?shareid=412128&uk=3022339290
The scatter file matches with my phone so im baffled to where the problem is,
My phone wont turn on or boot into recovery mode ,and I've no backup of my initial rom.
I tried flashing it again and everything went fine in flash tools with no errors but the phone still wont turn on or boot, it just slightly vibrates.
Is there anyway where I can completely wipe the phone and re flash it?
Any help on this would be greatly appreciated because I have absolutely no idea where to go from here.
(Sorry for new post, a guys ask me to write my ask here)
Hello guys, this is two days I'm looking for how to fix the problem but it's two days that I can not.
There are two days I tried to install firmware on my Jiayu 3s while operating, SP Flash Tool said the root had gone well since that day, impossible to turn on my phone, does not start, but does not load is detected as the "Alcatel DNIS # ** Interface" on my computer, I tried several methods; reinstall the drivers, try to reflash ect .. but nothing happens. I know this method before, I had a Chinese firmware (MOLY.lr9.w1423.md.lwtg.cmcc.mp.v9) , everything had gone well, stages ect ..
But when I tried to flash firmware with Europeans, it was bricked the phone and from that day, I can not do anything.
(Sorry for the bad English but I use Google Translate)
Can you help me solve the problem? I you will be very grateful if someone could help me.
My phone has a non-removable battery.
Regards,
Lackted
I need help please...
I need my phone
Hello Guys and Gals ^^
First of all, sorry for my english, i hope everyone can understand my problem
Yesterday my Samsung Galaxy S6 Edge shut down with an batteryload of 90%, after that it just entered a bootloop... :/
Since i've never had a CF or anything like that on my phone, i first thought of an hardware problem.
So i started reading here and some other forums, and tried as recommendet to flash the stock firmware via Odin3.
Now i can go beyond the Samsung - spondered by android or whatever it says - startscreen, the Blue LED starts and i enter the Samsung logo, which blinks for 3-4 times, just to reboot after that again... I also tried other versions of odin and other stock FW for my SM-G925F (Unbranded). Btw, also tried other USB ports, New Cables, Smart Switch... no Kies is running in the back while using odin.
Everytime i used Odin, it seems to work and my phone starts in the recovery mode with the little android guy, saying that its downloading sytem update... ERASING is the last thing he says after 20-30%, and the bootloop starts again. Also wiped cache and did Factory reset, but still no changes
I only used the 1 Part FW for odin. Hopefully that informations are enough for someone to help me out, but if there is a lack of informations, just ask for what you need to know further
I hope someone can help me, since i dont have the money for a new smartphone ^^
Hello guys.
I would really appreciate if you could shed some light onto my problem.
I recently acquired a Huawei Y9(2019-JKMLX3). The device is full stock, no custom recovery or root.
Also recently, right out of nowhere, the device ran out of battery, and when I tried to turn it on after a charge, I just got an awful bootloop... (Gets to the HUAWEI logo, and restarts over and over again)
Ok, i kind of know how to deal with this situations(already downloaded stock rom), but the real problem is that I can't access recovery by any means. I've tried every key combination, and nothing... Except for one time, when i did get a recovery screen, but i got FRP lock
Haven't been able to get to that screen again.
So, any recommendations? Is it dead, or is it that I'm doing something wrong.
Thanks for the support on this!
where did you get the stock firmware from?? did you resolve your issue from that time??
please share.
Thx
hello
I made a mistake by installing Rom on my phone umidigi a5 pro
I chose Format All + Download in sp flash tool by mistake and did not notice it until the end of the process and now my phone is away from the problem of IMEI it does not accept putting a lock to it and it cramps most of the time with a black screen appears, I cannot do anything until I restart it and the same process is returned
please anyone can help me
HidsonQ said:
hello
I made a mistake by installing Rom on my phone umidigi a5 pro
I chose Format All + Download in sp flash tool by mistake and did not notice it until the end of the process and now my phone is away from the problem of IMEI it does not accept putting a lock to it and it cramps most of the time with a black screen appears, I cannot do anything until I restart it and the same process is returned
please anyone can help me
Click to expand...
Click to collapse
Hi there,
Unfortunately I cannot help you with that problem as I'm not experimented enough with umidigi phone (that are more and more common around here). But I though a little response would be enough to warm your sad heart.
Also could you clarify what's going on with your IMEI?
Also, you double posted this question, let me ask @xanthrax for help with that
Here is the double one:
https://forum.xda-developers.com/android/help/phone-cramping-t4110453
Hello,
Thanks for your reply
As for IMEI, I fixed it, it remained a problem. The phone no longer accepts lock mode and when I lock the screen and open it again the phone stops working with a black screen until I restart it and some applications do not work
Any help @xanthrax !? please