I can not go into this
This can help me out of my problem
So why can not I enter the state of this
Request help me
My problem:
Download mode me :
Can not reach this state:
Why is it
How do I solve this problem first image
My device is stuck on it
Because I installed the wrong aboot it made my device to be like
The laf partition appears to be broken.
Can the phone bootup normally?
Wait until tomorrow and I will post instructions on how to fix it.
Sent from my GT-I5500 [CM11]
Vagelis1608 said:
The laf partition appears to be broken.
Can the phone bootup normally?
Wait until tomorrow and I will post instructions on how to fix it.
Sent from my GT-I5500 [CM11]
Click to expand...
Click to collapse
4 days so I can not fix it
I told you what I did a mistake
I installed through the app when ABOOT slave device
It did reboot
This result
I made a mistake I installed ABOOT not right for my device
You may not post Guide Now
I need a device to work today
KDZ Flash
Does not help me
You sent me a private message
A state machine should be turned off?
Download Mode?
I always write down cable disconnected
How do I insert mode debug mode?
When the machine is not working?
I need access to my PC to give you the needed files which I will get in a few hours.
Until then, you will need to install adb and fastboot. After you install them, run this command in a cmd and give me the output with your device connected.
Code:
fastboot devices
Sent from my GT-I5500 [CM11]
Vagelis1608 said:
I need access to my PC to give you the needed files which I will get in a few hours.
Until then, you will need to install adb and fastboot. After you install them, run this command in a cmd and give me the output with your device connected.
Code:
fastboot devices
Sent from my GT-I5500 [CM11]
Click to expand...
Click to collapse
Tell me let me ask you to write files to me step by step step by step what to do
You can go back to normal mode of the device? Is this possible?
Currently five days appliance repair lab where I bought it they are trying to fix it
They told me how I got into this situation haha
Meanwhile they can not fix it
So maybe I fix it myself with Tell me what to do
Thank you
haimmalka said:
Tell me let me ask you to write files to me step by step step by step what to do
You can go back to normal mode of the device? Is this possible?
Currently five days appliance repair lab where I bought it they are trying to fix it
They told me how I got into this situation haha
Meanwhile they can not fix it
So maybe I fix it myself with Tell me what to do
Thank you
Click to expand...
Click to collapse
Sorry, I forgot
Anyway, here it is:
0. Understand that this is your risk, not mine. You are responsible for what you do!
1. Download the attached laf.zip and unzip it.
2. Put the laf.img at the same directory that fastboot is.
3. Type the following on a cmd (with your device plugged in & in fastboot mode):
Code:
fastboot devices
a. If the device is on the list, proceed to 4.
b. If the device is not on the list, tell me and I will try to assist as much as I can (stop here).4. Type the following on a cmd (with your device plugged in & in fastboot mode):
Code:
fastboot flash laf laf.img
5. Remove the USB and, after that, remove the battery for 2-3 seconds and put it back in.
6. Get into download mode and flash a KDZ.
That should do it
Vagelis1608 said:
Sorry, I forgot
Anyway, here it is:
0. Understand that this is your risk, not mine. You are responsible for what you do!
1. Download the attached laf.zip and unzip it.
2. Put the laf.img at the same directory that fastboot is.
3. Type the following on a cmd (with your device plugged in & in fastboot mode):
Code:
fastboot devices
a. If the device is on the list, proceed to 4.
b. If the device is not on the list, tell me and I will try to assist as much as I can (stop here).4. Type the following on a cmd (with your device plugged in & in fastboot mode):
Code:
fastboot flash laf laf.img
5. Remove the USB and, after that, remove the battery for 2-3 seconds and put it back in.
6. Get into download mode and flash a KDZ.
That should do it
Click to expand...
Click to collapse
fastboot mode That's how I put this situation?
This mode device does not enter !!!
Currently the device is not in my lab to fix it for me
They did not succeed with I try this .. http://postimg.org/image/gjwtux8mr/
haimmalka said:
fastboot mode That's how I put this situation?
This mode device does not enter !!!
Currently the device is not in my lab to fix it for me
They did not succeed with I try this .. http://postimg.org/image/gjwtux8mr/
Click to expand...
Click to collapse
Fastboot is when the device says "fastboot commands processing"
Sent from my GT-I5500 [CM11]
Vagelis1608 said:
Fastboot is when the device says "fastboot commands processing"
Sent from my GT-I5500 [CM11]
Click to expand...
Click to collapse
Ok when he is on he says that
What percentage of the 100 it should work?
What is this file laf?
May be a result of it be destroyed?
laf is download mode.
It should reach 100%
Sent from my GT-I5500 [CM11]
Vagelis1608 said:
laf is download mode.
It should reach 100%
Sent from my GT-I5500 [CM11]
Click to expand...
Click to collapse
I can get the one I posted as an image here
As picture number two
I'm running machine comes as a single image mode
Usb connector
Cmd impression
Where do I download laf name?
ADB?
Regret not understand you
Continue downloaded your attachment
What to do with it
directory that fastboot.. What is where the directory ?
Vagelis1608 said:
Sorry, I forgot
Anyway, here it is:
0. Understand that this is your risk, not mine. You are responsible for what you do!
1. Download the attached laf.zip and unzip it.
2. Put the laf.img at the same directory that fastboot is.
3. Type the following on a cmd (with your device plugged in & in fastboot mode):
Code:
fastboot devices
a. If the device is on the list, proceed to 4.
b. If the device is not on the list, tell me and I will try to assist as much as I can (stop here).4. Type the following on a cmd (with your device plugged in & in fastboot mode):
Code:
fastboot flash laf laf.img
5. Remove the USB and, after that, remove the battery for 2-3 seconds and put it back in.
6. Get into download mode and flash a KDZ.
That should do it
Click to expand...
Click to collapse
Hey guys if you remember me
Laboratory can not fix my device
For two months
I currently Player
I want to try it
I downloaded this file
What do I do now you can explain to me for me to download//What is fastboot?
haimmalka said:
Hey guys if you remember me
Laboratory can not fix my device
For two months
I currently Player
I want to try it
I downloaded this file
What do I do now you can explain to me for me to download//What is fastboot?
Click to expand...
Click to collapse
Google: How to install fastboot
Sent from my D620r [Stock 4.4.2]
Vagelis1608 said:
Google: How to install fastboot
Sent from my D620r [Stock 4.4.2]
Click to expand...
Click to collapse
I was able to thank your file must have helped me do it
Device back to life
Please read asap
Vagelis1608 said:
Google: How to install fastboot
Sent from my D620r [Stock 4.4.2]
Click to expand...
Click to collapse
Hey man, i have the problem that he got i flash the wrong aboot file i have the same problem that he got so when i was reading your instruction i was able to understand where can i put the laf.img file because when i wrote at the cmd it's shows me error : cant load 'laf.img' : no error ..
So Please can u tell me where can i put this file to make it work?
thanks in advance @Vagelis1608
frugan said:
Hey man, i have the problem that he got i flash the wrong aboot file i have the same problem that he got so when i was reading your instruction i was able to understand where can i put the laf.img file because when i wrote at the cmd it's shows me error : cant load 'laf.img' : no error ..
So Please can u tell me where can i put this file to make it work?
thanks in advance @Vagelis1608
Click to expand...
Click to collapse
I have never used fastboot myself so I don't know. Just Google it
Sent from my D620r [Stock 4.4.2]
Vagelis1608 said:
I have never used fastboot myself so I don't know. Just Google it
Sent from my D620r [Stock 4.4.2]
Click to expand...
Click to collapse
Anyway thank you.. my phone nww wan't bootup it's stuck on LG Logo. so I will really appreciate your help.
Related
Hi,
I'm on the process of installing ClockWorkMod Recovery, stupid of me i forgot to enable USB Debugging option on my phone. Now I'm stuck on Command Prompt saying...
C:\Fastboot>fastboot flash boot recovery-nozomi.img
< waiting for device >
It has been sitting for more than 5 minutes as I am typing now. Should I disconnect the USB cord? Would this action brick my phone?
Sorry for my stupidity!
cybrkada said:
Hi,
I'm on the process of installing ClockWorkMod Recovery, stupid of me i forgot to enable USB Debugging option on my phone. Now I'm stuck on Command Prompt saying...
C:\Fastboot>fastboot flash boot recovery-nozomi.img
< waiting for device >
It has been sitting for more than 5 minutes as I am typing now. Should I disconnect the USB cord? Would this action brick my phone?
Sorry for my stupidity!
Click to expand...
Click to collapse
How are you installing it ???
Via flash tool??
And nope your phone won't brick
I disconnected the cord. Turned on the phone and noticed that USB Debugging is ticked/checked. So I repeated the process but I am still getting..
< waiting for device >
What should I do?
soulhackereborn said:
How are you installing it ???
Via flash tool??
And nope your phone won't brick
Click to expand...
Click to collapse
Yes, via Flastool. Yeah my phone did not get bricked! :good:
cybrkada said:
Yes, via Flastool. Yeah my phone did not get bricked! :good:
Click to expand...
Click to collapse
can u give the link for this recovery you triein to push through flashtool and the turorial if possible...
soulhackereborn said:
can u give the link for this recovery you triein to push through flashtool and the turorial if possible...
Click to expand...
Click to collapse
Hi soulhackereborn!
Sorry for the late reply! Sorry the forum prevented me from posting the URL as I am just a new user here.
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Anyway the tutorial says (copy&paste):
Use the computer for downloading the CWM file from here.
Then, on the same computer download fastboot from here.
Extract fastboot on C:\ drive.
Then, copy the downloaded “ecovery-nozomi.img” file to the Fastboot folder from your computer.
Now you must connect the phone in fastboot mode with the computer.
In order to do so you must plug the USB cord to the PC, then on your phone press and hold the Volume Up button and while doing this connect the USB cable to your Xperia S.
Up next, on the PC click on “Start -> Accessories -> on Command prompt right click -> Run as administrator”.
The command prompt window will now be displayed.
Now, enter the following commands (press enter after each one): “cd c:\Fastboot” and “fastboot flash boot recovery-nozomi.img”.
CWM will now be flashed.
In the end the “finished / OKAY” message should be displayed.
In command prompt enter “fastboot reboot”.
Your handset should now reboot into ClockworkMod recovery.
Remove the USB cord and disconnect the Xperia S from the computer.
cybrkada said:
Hi soulhackereborn!
Sorry for the late reply! Sorry the forum prevented me from posting the URL as I am just a new user here.
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Anyway the tutorial says (copy&paste):
Use the computer for downloading the CWM file from here.
Then, on the same computer download fastboot from here.
Extract fastboot on C:\ drive.
Then, copy the downloaded “ecovery-nozomi.img” file to the Fastboot folder from your computer.
Now you must connect the phone in fastboot mode with the computer.
In order to do so you must plug the USB cord to the PC, then on your phone press and hold the Volume Up button and while doing this connect the USB cable to your Xperia S.
Up next, on the PC click on “Start -> Accessories -> on Command prompt right click -> Run as administrator”.
The command prompt window will now be displayed.
Now, enter the following commands (press enter after each one): “cd c:\Fastboot” and “fastboot flash boot recovery-nozomi.img”.
CWM will now be flashed.
In the end the “finished / OKAY” message should be displayed.
In command prompt enter “fastboot reboot”.
Your handset should now reboot into ClockworkMod recovery.
Remove the USB cord and disconnect the Xperia S from the computer.
Click to expand...
Click to collapse
everything seems to be good in the tutorial though..
But what is it a kernel, rom or an CWM image file ???
if still it says waiting for device then here's a couple things you should check :-
1) Fastboot ie; S1 Boot driver installed or no
2) Switch off phone and connect it to the PC via usb holding Volume + button (this is fastboot mode)
3) Check does your device remain in fastboot mode or no i mean purple led light glows stays on continuously or no until u execute the command, if not reinstall the driver and try again
4) If everything well till now try flashing with the given commands without the quotes ie; fastboot flash boot recovery-nozomi.img
soulhackereborn said:
everything seems to be good in the tutorial though..
But what is it a kernel, rom or an CWM image file ???
if still it says waiting for device then here's a couple things you should check :-
1) Fastboot ie; S1 Boot driver installed or no
2) Switch off phone and connect it to the PC via usb holding Volume + button (this is fastboot mode)
3) Check does your device remain in fastboot mode or no i mean purple led light glows stays on continuously or no until u execute the command, if not reinstall the driver and try again
4) If everything well till now try flashing with the given commands without the quotes ie; fastboot flash boot recovery-nozomi.img
Click to expand...
Click to collapse
1. I dont know how to check, it should be installed as i unlock the bootloader yesterday. I actually manually updated it on Device Manager.
2. I understand this.
3. On my case, it's a blue LED lit steadily after doing step 2. I am using Sony Xperia S.
4. Yes, i flashed them without the quotes.
cybrkada said:
1. I dont know how to check, it should be installed as i unlock the bootloader yesterday. I actually manually updated it on Device Manager.
2. I understand this.
3. On my case, it's a blue LED lit steadily after doing step 2. I am using Sony Xperia S.
4. Yes, i flashed them without the quotes.
Click to expand...
Click to collapse
Try rebooting both your PC and phone... This is a small thing but always helps and one more thing after switching off the phone n before connecting it in fastboot mode let der be a gap of alteat a min or two
Is this tutorial on xda or some other forum if on xda then try messaging me the link or tel me forum sub forum topic and title
Usually <waiting for device> can show up when you don't have proper drivers installed. Double check them if you haven't done so.
soulhackereborn said:
Try rebooting both your PC and phone... This is a small thing but always helps and one more thing after switching off the phone n before connecting it in fastboot mode let der be a gap of alteat a min or two
Is this tutorial on xda or some other forum if on xda then try messaging me the link or tel me forum sub forum topic and title
Click to expand...
Click to collapse
I dont see PM here, i think I am still restricted.
see if the link helps, i removed w w w
android.gs/install-clockworkmod-recovery-sony-xperia-s
i'm rebooting them after this.. thanks
LiveSquare said:
Usually <waiting for device> can show up when you don't have proper drivers installed. Double check them if you haven't done so.
Click to expand...
Click to collapse
Which drivers? I have already downloaded SDK and I believe the S1 driver is installed yesterday when i unlock the bootloader.
i rebooted both the PC and the CP, but i am still getting < waiting for device >...
by the way is the ADB from tutorial the SDK one?
cybrkada said:
i rebooted both the PC and the CP, but i am still getting < waiting for device >...
by the way is the ADB from tutorial the SDK one?
Click to expand...
Click to collapse
Dude as far as I know there is no need to check/ tick USB debugging for fastboot... It's just for flashtool..
Try re -installing the drivers again manually or let windows search over internet...
Finally, i made it! thanks to both of you!
fastboot.exe seems to be corrupted!
Problem solved!
Just last one question, now that i have CWM recovery on my phone, is it already rooted? sorry i am beginner...
cybrkada said:
Just last one question, now that i have CWM recovery on my phone, is it already rooted? sorry i am beginner...
Click to expand...
Click to collapse
Yes ur rooted!!
Thanks!
I'm currently downloading Cyanogenmod ver 9.1. Hopefully it works! Thank you so much buddy! You have been very helpful! If I get problems on flashing CM9.1, i'll contact you , hehe
One of the reminders on isntalling CM9 is:
Make sure that your Xperia S is already running a rooted firmware, and that it has the ClockworkMod Recovery properly installed.
How do I know I have a rooted firmware? Do I still need to flash FTF file?
By the way, I am getting a boot loop from CWM recovery, I cant go to the homescreen, no option to turn off! It only reboots the CWM.
(Still downloading CM9 as of the moment)
Hi again guys,
I have a p760 with v20b_00 eu open rom and im trying a lot of time to unlock bootloader
i did everything if you will see here
http://forum.xda-developers.com/showthread.php?t=2221102&page=20
and bootloader is still locked
Any tips? any other guys which will sure unlock my BL at last?
Please
Aristodikos1 said:
Hi again guys,
I have a p760 with v20b_00 eu open rom and im trying a lot of time to unlock bootloader
i did everything if you will see here
http://forum.xda-developers.com/showthread.php?t=2221102&page=20
and bootloader is still locked
Any tips? any other guys which will sure unlock my BL at last?
Please
Click to expand...
Click to collapse
[*]Not for Newbies. (need some experience in flashing and installing fastboot drivers)
Click to expand...
Click to collapse
Sent from my LG-P769 using Tapatalk 4
fastboot
Are you able to fastboot?
Aristodikos1 said:
Hi again guys,
I have a p760 with v20b_00 eu open rom and im trying a lot of time to unlock bootloader
Please
Click to expand...
Click to collapse
thankyouxda said:
Are you able to fastboot?
Click to expand...
Click to collapse
NO
The only think that i can do is to reboot in cwm by artas by holding volume down when the lights flashing but i cannot install cm 10.1 because my bl is still locked. adb reboot oem-unlock is not working correct. When i push it, sometimes reboot with lg logo sometimg shutdown and if i want to power on again i have to hold power button 10 sec and press it again
geeshiet said:
Sent from my LG-P769 using Tapatalk 4
Click to expand...
Click to collapse
i am not so newbie mate, i learn a loto of things in this forum....
Follow this thread (link below) to get fastboot working. Then you can get to the next step. I just posted some instructions from that thread below for FYI.
Batch file command is "start_fastboot.bat" not "start-fastboot.bat"
Also,'when the tool says "Wait 5 seconds" don't wait but put the battery in immediately.
http://forum.xda-developers.com/showthread.php?t=2119090
----------------------------------------------------------------------------------------------------------------
What do you need:
omap4boot, get it from original thread.
Extract omap4boot archive somewhere like C:\omap4boot (I will use this path in the tutorial).
Power off your phone and remove the battery.
Connect your phone (still without the battery) to the PC.
You will hear the sound of a new driver, then the sound of a driver when it disconnects continiusly.
Start -> Right click on "Computer" -> "Manage".
On the left column, click on "Device manager".
You will see a device that appear and disappear under "Other/Unknown Devices".
You must right click on the unknown device before it disappear, once clicked select "Driver Update".
Click on the second button (manually install driver) and insert the "usb_drv_windows" path (C:\omap4boot\usb_drv_windows) and install the driver.
Disconnect the phone from the PC and power it off.
Open a command prompt (Win+R, type cmd and press Enter).
Type the following command in the command prompt:
Code:
cd C:\omap4boot
start-fastboot.bat
Now input 3 (Prada 3.0 P940) and press enter.
Plug the phone without battery to the PC, when the tool says "Wait 5 seconds" put the battery in your phone.
(The first time that you do this, you have to install the drivers again. Repeat step 9)
At the other prompts answer always "N", this could be important.
Now you can use fastboot on L9 Next times you can start from step 12.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Aristodikos1 said:
i am not so newbie mate, i learn a loto of things in this forum....
Click to expand...
Click to collapse
thankyouxda said:
Follow this thread (link below) to get fastboot working. Then you can get to the next step. I just posted some instructions from that thread below for FYI.
Batch file command is "start_fastboot.bat" not "start-fastboot.bat"
Also,'when the tool says "Wait 5 seconds" don't wait but put the battery in immediately.
http://forum.xda-developers.com/showthread.php?t=2119090
----------------------------------------------------------------------------------------------------------------
What do you need:
omap4boot, get it from original thread.
Extract omap4boot archive somewhere like C:\omap4boot (I will use this path in the tutorial).
Power off your phone and remove the battery.
Connect your phone (still without the battery) to the PC.
You will hear the sound of a new driver, then the sound of a driver when it disconnects continiusly.
Start -> Right click on "Computer" -> "Manage".
On the left column, click on "Device manager".
You will see a device that appear and disappear under "Other/Unknown Devices".
You must right click on the unknown device before it disappear, once clicked select "Driver Update".
Click on the second button (manually install driver) and insert the "usb_drv_windows" path (C:\omap4boot\usb_drv_windows) and install the driver.
Disconnect the phone from the PC and power it off.
Open a command prompt (Win+R, type cmd and press Enter).
Type the following command in the command prompt:
Code:
cd C:\omap4boot
start-fastboot.bat
Now input 3 (Prada 3.0 P940) and press enter.
Plug the phone without battery to the PC, when the tool says "Wait 5 seconds" put the battery in your phone.
(The first time that you do this, you have to install the drivers again. Repeat step 9)
At the other prompts answer always "N", this could be important.
Now you can use fastboot on L9 Next times you can start from step 12.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
thank you for your responce. Actually the bootloader is still locked. Do you thinkis there any tip or cheat that it is not listed in the steps?
Butentering in fastbootmode will not unlock the bootloader. If you followed the steps in general thread and still cant unlock it, we are with the same problem my friend and.. unfortunatelly, still no solution for me
Sent from my LG-P768 using xda app-developers app
if you can fastboot then follow this link below and it should work afaik
http://forum.xda-developers.com/showthread.php?t=2221102
You can ignore the part about installing fastboot drivers since you should have it installed already if you are able to fastboot
And I guess you already have LG driver installed.
"IMPORTANT: You must have P760/P765 with P760 V20B EUROPE OPEN rom flashed on it....or OTHER UNLOCKABLE ROMS"
Aristodikos1 said:
thank you for your responce. Actually the bootloader is still locked. Do you thinkis there any tip or cheat that it is not listed in the steps?
Click to expand...
Click to collapse
thankyouxda said:
if you can fastboot then follow this link below and it should work afaik
http://forum.xda-developers.com/showthread.php?t=2221102
You can ignore the part about installing fastboot drivers since you should have it installed already if you are able to fastboot
And I guess you already have LG driver installed.
"IMPORTANT: You must have P760/P765 with P760 V20B EUROPE OPEN rom flashed on it....or OTHER UNLOCKABLE ROMS"
Click to expand...
Click to collapse
Thank you guys,
First of all i NEVER saw this black fastboot screenin my phone that says "press volume up form unlock bl"
Second, i cannot find EUROPE open 20b...every link is not working
Don't you already have V20B installed per your first post. Otherwise you will have to flash it with the offline method....
if you are able to fastboot you should be able to get to that screen i believe.
Link to KDZ.
http://csmgdl.lgmobile.com/swdata/WD...00/V20B_00.kdz
Aristodikos1 said:
Thank you guys,
First of all i NEVER saw this black fastboot screenin my phone that says "press volume up form unlock bl"
Second, i cannot find EUROPE open 20b...every link is not working
Click to expand...
Click to collapse
If your model p760 you should see a fastboot screen (everything black with dome letters on top). But you can confirm if you are in fastboot mode when you run the start fastboot.bat, open a cmd in the folder that contains fastboot, adb, etc and type fastboot devices
You should see a coupçe of numbers and letters, like in adb devices
If dont appear nothing, your phone doesnt entered in fastboot. Then try flashing ics xloader and uboot and try fastboot again. If your device is seen, you should be able to unlock the bootloader following the tutorial in general thread, always remembering waiting 30 min or more to try
Here you will find v20b europe open:
http://lg-phone-firmware.com/index.php?id_mod=18
The download will not work if you have shttps enabled and hosts file still have the lg related lines. You must remove the 2 lines, save it, close shttps and try download again, now will work
Sent from my LG-P768 using xda app-developers app
shucrut said:
If your model p760 you should see a fastboot screen (everything black with dome letters on top). But you can confirm if you are in fastboot mode when you run the start fastboot.bat, open a cmd in the folder that contains fastboot, adb, etc and type fastboot devices
You should see a coupçe of numbers and letters, like in adb devices
If dont appear nothing, your phone doesnt entered in fastboot. Then try flashing ics xloader and uboot and try fastboot again. If your device is seen, you should be able to unlock the bootloader following the tutorial in general thread, always remembering waiting 30 min or more to try
Here you will find v20b europe open:
http://lg-phone-firmware.com/index.php?id_mod=18
The download will not work if you have shttps enabled and hosts file still have the lg related lines. You must remove the 2 lines, save it, close shttps and try download again, now will work
Sent from my LG-P768 using xda app-developers app
Click to expand...
Click to collapse
yes that hosts file was the problem thanks. Also i already download some x and u but i feel that they are the wrong ones. Can you tell me which ones to download? shall i install them with rooted eu open 20b or with some ics rom?
i never be in fastboot mode. Every time i pushed adb reboot oem-unlock the phone or restarts or turned off (i think)
You can follow this: http://forum.xda-developers.com/showpost.php?p=44325657&postcount=4
Probably will help you a lot in this fastboot thing, i put a link to Lelus's fastboot thread. Downloading the file from there you'll be able to install your phone's xloader and uboot files
Sent from my LG-P768 using xda app-developers app
shucrut said:
You can follow this: http://forum.xda-developers.com/showpost.php?p=44325657&postcount=4
Probably will help you a lot in this fastboot thing, i put a link to Lelus's fastboot thread. Downloading the file from there you'll be able to install your phone's xloader and uboot files
Sent from my LG-P768 using xda app-developers app
Click to expand...
Click to collapse
Ah! so with this only i can unlick my BL? no 30 minutes waiting?
No, im sorry, didnt explained to much. Follow that to flash xloader and uboot and then install V20B europe open with the tutorial i said to you. After that, hard reset the phone (turn it off, turn it on and let pressed vol down and home button). After hard reset the phone will restart. Let phone connected to wifi and make sure your sim card is inserted and you have the network signal, enable usb debugging and connect your phone to pc via usb cable in lg software mode. Then wait 30 minutes (best is to wait at least 1 hour). Open a cmd where adb is (if you downloaded fastboot.zip from the link i gave you, its inside the fastboot/bin folder you extracted) and type the following command:
adb reboot oem-unlock
Your phone should restart and show you a black screen asking if you do want to unlock the bootloader. Press vol up to unlock the bootloader. And thats it, hope it work for you
Sent from my LG-P768 using xda app-developers app
shucrut said:
If your model p760 you should see a fastboot screen (everything black with dome letters on top). But you can confirm if you are in fastboot mode when you run the start fastboot.bat, open a cmd in the folder that contains fastboot, adb, etc and type fastboot devices
You should see a coupçe of numbers and letters, like in adb devices
If dont appear nothing, your phone doesnt entered in fastboot. Then try flashing ics xloader and uboot and try fastboot again. If your device is seen, you should be able to unlock the bootloader following the tutorial in general thread, always remembering waiting 30 min or more to try
Here you will find v20b europe open:
http://lg-phone-firmware.com/index.php?id_mod=18
The download will not work if you have shttps enabled and hosts file still have the lg related lines. You must remove the 2 lines, save it, close shttps and try download again, now will work
Sent from my LG-P768 using xda app-developers app
Click to expand...
Click to collapse
as i read in your post, you told me to install ics x and u for 760, which means i will install ICS x and u with 20b JB roma is that correct?
Guys at last!!!
IS THERE ANYONE WHO HAS LG L9 OPTIMUS P760 (NOT P765/P769/P*******) ONLY P760!!!!!!
WHO UNLOCKED HIS PHONE? IF YES HOW?
WHICH ROM DID HE USED?
WHAT X AND U DID HE USED?
at last tell me
shucrut said:
No, im sorry, didnt explained to much. Follow that to flash xloader and uboot and then install V20B europe open with the tutorial i said to you. After that, hard reset the phone (turn it off, turn it on and let pressed vol down and home button). After hard reset the phone will restart. Let phone connected to wifi and make sure your sim card is inserted and you have the network signal, enable usb debugging and connect your phone to pc via usb cable in lg software mode. Then wait 30 minutes (best is to wait at least 1 hour). Open a cmd where adb is (if you downloaded fastboot.zip from the link i gave you, its inside the fastboot/bin folder you extracted) and type the following command:
adb reboot oem-unlock
Your phone should restart and show you a black screen asking if you do want to unlock the bootloader. Press vol up to unlock the bootloader. And thats it, hope it work for you
Sent from my LG-P768 using xda app-developers app
Click to expand...
Click to collapse
Soory i just saw this message mate. Ok i will do exactly that (according my english your messages sounds more familiar to me)
i will choose order "6" in fastboot that says "x & U for p760 jb (not "2" for ics)
Ok i did this guide
BL is still locked but when i run command adb reboot oem-unlock i saw somethignthat i never saw before
adb server is out of date. killing...
* daemon started successfully *
but the phone shuted down...no restart and to power on again i kept 10 sec power buton and after it powered on.
Question, when i run oem-unlock the fastboot goes immmediatelly or after some time?
Hello,
today i tried to root my phone who runs on kitkat 44.2 and i v'e made a big mistake
i wanted to make my phone look like the g3
now its rooted but while it got in recovery i didnt know how to select the options so what i did was
i took my battery out and now i tried to get it on again and it won't
it doensn't want to get in recovery nothing
when i connect it with my phone it shows that its connected
i don't know what to do can someone help me pleasss i want it back like the beginning without the root pleas (((((
Sorry @Teamsvg,
but with this description no one can help you.
Please explain what you did.
How did you root?
What did you do to make it G3 like?
Did you flash anything?
I can not believe it bricked because of pulling the battery while in recovery, because I did the same when my phone was all stock and nothing wrong happened.
You may try: http://forum.xda-developers.com/showthread.php?p=54325341
Regards,
Zaaap
hi
Zaaap72 said:
Sorry @Teamsvg,
but with this description no one can help you.
Please explain what you did.
How did you root?
What did you do to make it G3 like?
Did you flash anything?
I can not believe it bricked because of pulling the battery while in recovery, because I did the same when my phone was all stock and nothing wrong happened.
You may try: http://forum.xda-developers.com/showthread.php?p=54325341
Regards,
Zaaap
Click to expand...
Click to collapse
hi, thnks for replying
this is what i tried
https://www.youtube.com/watch?v=KINp9v_GN3o
i didn't enable usb debugging ...
zaap
Zaaap72 said:
Sorry @Teamsvg,
but with this description no one can help you.
Please explain what you did.
How did you root?
What did you do to make it G3 like?
Did you flash anything?
I can not believe it bricked because of pulling the battery while in recovery, because I did the same when my phone was all stock and nothing wrong happened.
You may try: http://forum.xda-developers.com/showthread.php?p=54325341
Regards,
Zaaap
Click to expand...
Click to collapse
My phone is like this: you the screen is black, i forgot to enable usb debugging because i tried to root it in my phone so i ddin't need my computer, i can't get in download mode or recovery nothing ! i tried the buttns( and no my buttons works fine) how can i fix this? the link you've send me ask me to put my phone in download mode : "if your device is bricked and can't boot you'll have to enter the Download Mode, to do that just keep holding the Vol. Up button while inserting the USB cable in the phone( The USB cable must be already plugged into the PC while doing that), and you keep it until you go into the Download Mode."
but it can't ...
Teamsvg said:
My phone is like this: you the screen is black, i forgot to enable usb debugging because i tried to root it in my phone so i ddin't need my computer, i can't get in download mode or recovery nothing ! i tried the buttns( and no my buttons works fine) how can i fix this? the link you've send me ask me to put my phone in download mode : "if your device is bricked and can't boot you'll have to enter the Download Mode, to do that just keep holding the Vol. Up button while inserting the USB cable in the phone( The USB cable must be already plugged into the PC while doing that), and you keep it until you go into the Download Mode."
but it can't ...
Click to expand...
Click to collapse
autoirec is onyl for g2.. not mini. becouse we have locked bootloaders custom recoverys doesnt work. something similiar happened to my phone. i can tell you by confedens that first of all it doesnt sound that you are familiar with custom recoverys and stuff and that you have hard bricked your phone. i had to send mine in after 2 days of trying to make it start again. it is broken. and if you take it to service i wouldnt tell them what you did or that you rooted it.
Try this. If you phone is detected under sdb or sdc you have a chance to unbrick your phone.
I attached the files needed to unbrick G2 mini:
sbl1.img
aboot.img
rpm.img
tz.img
recovery.img - download from here.
Be very careful. The order of partitions for our phone is different from the LG G2. So then you use "gdisk -l /dev/sdb" command, find the partitions numbers of each file attached, and use that number in dd command.
I do not know why on tutorial for G2 there is a warning not to flash original recovery.img on recovery partition. So my advice is to flash all partition except recovery.img and see if your phone enter download mode. If not, flash recovery.img, you have nothing to lose.
If the phone enter download mode flash kdz.
powermetza said:
Try this. If you phone is detected under sdb or sdc you have a chance to unbrick your phone.
I attached the files needed to unbrick G2 mini:
sbl1.img
aboot.img
rpm.img
tz.img
recovery.img - download from here.
Be very careful. The order of partitions for our phone is different from the LG G2. So then you use "gdisk -l /dev/sdb" command, find the partitions numbers of each file attached, and use that number in dd command.
I do not know why on tutorial for G2 there is a warning not to flash original recovery.img on recovery partition. So my advice is to flash all partition except recovery.img and see if your phone enter download mode. If not, flash recovery.img, you have nothing to lose.
If the phone enter download mode flash kdz.
Click to expand...
Click to collapse
Can i use this files on G2 Mini D618?
Thanks!
No you can´t.
Sent from my LG-D620 using XDA Free mobile app
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
damulag1234 said:
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
Click to expand...
Click to collapse
Hi
Do Flash a New Rom of your Phone with Flashtools v 0.9.18.5
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Sajad Askari said:
Hi
Do Flash a New Rom of your Phone with Flashtools v 0.9.18.5
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Click to expand...
Click to collapse
my z2 is turned off and i cant open it to allow usb debugging sir,
what should I do? i think my z2 got brick
damulag1234 said:
my z2 is turned off and i cant open it to allow usb debugging sir,
what should I do? i think my z2 got brick
Click to expand...
Click to collapse
No problem
Just install Flashtools V 0.9.18.5
And install Your Drivers
And Do flash Your Rom
No need usb Debugging
Are You Can Flash Stock ROM?
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Unless you've messed up the TA partition, our phones are pretty hard to brick. If you hold vol_up then plug in USB to your PC, it should boot into flash mode with a blue LED. That means you can use Flashtool to flash an FTF file to the phone, effectively factory program it.
Si_NZ said:
Unless you've messed up the TA partition, our phones are pretty hard to brick. If you hold vol_up then plug in USB to your PC, it should boot into flash mode with a blue LED. That means you can use Flashtool to flash an FTF file to the phone, effectively factory program it.
Click to expand...
Click to collapse
my z2 is turned off and i already flashed but i used a wrong firmware.
my z2 now is not opening or booting and it say The software update failed
what should i do?
damulag1234 said:
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
Click to expand...
Click to collapse
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://www.androidfilehost.com/?fid=24521665358595410
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?pref=2&pli=1
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Mostafa Sherif said:
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://mega.nz/#!7942XJjI!9gurv7k3P...RTiDPeArhwjXsG XB9c
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/dow...41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img.html
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn...ew?usp=sharing
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Click to expand...
Click to collapse
i need the key to download can you provide it for me?
damulag1234 said:
i need the key to download can you provide it for me?
Click to expand...
Click to collapse
Ok, no problem but for which one?!
Mostafa Sherif said:
Ok, no problem but for which one?!
Click to expand...
Click to collapse
sir can you provide me all the needed files? the download links are not working. and the other needs key to be downloaded
damulag1234 said:
sir can you provide me all the needed files? the download links are not working. and the other needs key to be downloaded
Click to expand...
Click to collapse
Sorry for this problem,, but i have edited my post and provided you with a new alternative link (for Minimal ADB and Fastboot) see it again.
and i will check the other links now and if any another link is unavailable i will change it for you.
Mostafa Sherif said:
Ok, no problem but for which one?!
Click to expand...
Click to collapse
1. download link need key
2. download link is not working
3. downloaded
5.download link is not working
damulag1234 said:
1. download link need key
2. download link is not working
3. downloaded
5.download link is not working
Click to expand...
Click to collapse
Check now all the download links again,, it should works now normally
Tell me if there is any another thing
Sorry for that
Mostafa Sherif said:
Check now all the download links again,, it should works now normally
Tell me if there is any another thing
Sorry for that
Click to expand...
Click to collapse
how to use md5 file? do i just need to paste it?
damulag1234 said:
how to use md5 file? do i just need to paste it?
Click to expand...
Click to collapse
Where do you get these files?? i didn't tell you to use any md5 file. and there is no md5 file to use it and if you have found any md5 file just ignore it and continue doing these steps only.
Do the steps as i write it and your phone will boot again successfully
Mostafa Sherif said:
Where do you get these files?? i didn't tell you to use any md5 file. and there is no md5 file to use it and if you have found any md5 file just ignore it.
Do the steps as i write it and your phone will boot again successfully
Click to expand...
Click to collapse
the twrp file is an md5 file sir
damulag1234 said:
the twrp file is an md5 file sir
Click to expand...
Click to collapse
Download the twrp.img from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
After you download it you will see it's name is twrp-3.0.2-0-sirius.img
Then continue my steps normally and tell me if there is any problem
Mostafa Sherif said:
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://www.androidfilehost.com/?fid=24521665358595410
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?pref=2&pli=1
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Click to expand...
Click to collapse
sir i cant understand the instruction on number 8 and 9
would you mind explaining it to me? thanks a lot
damulag1234 said:
sir i cant understand the instruction on number 8 and 9
would you mind explaining it to me? thanks a lot
Click to expand...
Click to collapse
No problem In step 8 first: Go to the path i told you in the description then press and hold shift button from keyboard and then press right click with mouse at any empty space in the folder,, a menu will pop up then you will find an option named (Open command window here) select it, then a command window will open.
I wish i had descriped it to you exactly and tell me if you successed to make it
If you do step 8 correctly then continue to step 9.. in step 9, you have to write the commands that i give it to you in the command window that have been opened in step 8.
The commands that i had bold it
Mostafa Sherif said:
No problem In step 8 first: Go to the path i told you in the description then press and hold shift button from keyboard and then press right click with mouse at any empty space in the folder,, a menu will pop up then you will find an option named (Open command window here) select it, then a command window will open.
I wish i had descriped it to you exactly and tell me if you successed to make it
If you do step 8 correctly then continue to step 9.. in step 9, you have to write the commands that i give it to you in the command window that have been opened in step 8.
The commands that i had bold it
Click to expand...
Click to collapse
i followed it what about the number 10? should i put it before i enter the command from number 9?
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
redminote3 said:
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
Click to expand...
Click to collapse
But my pc dont see phone (mi pc suite , and mi flash ) .
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
still problem
redminote3 said:
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
Click to expand...
Click to collapse
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
innynizty said:
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
Click to expand...
Click to collapse
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
innynizty said:
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
Click to expand...
Click to collapse
which miflash version used for now? pls ensure you use 201604xx (64 bit only) or 20160830 (32/64 bit)
to flash device, already bunch of guide on guide section. pls do some research there.
to unlock your phone, you can follow below unofficial ways or official ways which require to apply to mi server
en.miui.com/thread-253680-1-1.html
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
innynizty said:
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
Click to expand...
Click to collapse
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
[email protected] said:
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
Click to expand...
Click to collapse
When i click on edl they only shows me " waiting for device" ?
innynizty said:
When i click on edl they only shows me " waiting for device" ?
Click to expand...
Click to collapse
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
[email protected] said:
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
Click to expand...
Click to collapse
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
innynizty said:
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
Click to expand...
Click to collapse
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
[email protected] said:
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
Click to expand...
Click to collapse
I cant turn on my phone and enable nothink , i know how to root phone and other .
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
[email protected] said:
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
Click to expand...
Click to collapse
I try to install miui and then my phone stuck in xiaomi logo ;/
innynizty said:
I try to install miui and then my phone stuck in xiaomi logo ;/
Click to expand...
Click to collapse
It means it has no ROM installed now....
Even without that turning on you could boot into edl and unlock and flash twrp..
Don't know... Try again and search on net.. Now
Im also facing same issue???
Sent from my ASUS_T00J using Tapatalk
Do like people write before and Its easy to repair, Thanks boys