Hello everyone.
I have a Motorola Moto E with KitKat 4.4.4.
I wanted to partition my SD card, actually to swap internal with external memory.
I used AParted. I did something at the Configuration tab. I think I may have changed the boot order (i think??) to usbdisk.
Now, after I restarted the phone, it doesnt boot. at all. It shows as Qualcomm USB something when I plug it to PC.
I think it's bricked. I got this phone for a week, and I bricked it...
Can someone help me please????
what exactly shows when you boot your phone? is it stuck at boot logo?
Prashanth Meesara: said:
what exactly shows when you boot your phone? is it stuck at boot logo?
Click to expand...
Click to collapse
blank screen.... tried bootloader. nothing happens.
Try flashing stock firmware
Sent from my XT1022 using XDA Free mobile app
Prashanth Meesara: said:
Try flashing stock firmware
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
How, and with what tool should I flash it??
http://forum.xda-developers.com/showthread.php?t=2759495
Here is the method, if still didn't work you need to give your phone to service center
I think you can boot into fastboot since fastboot gets affected very rarely so try once. And if the device is detected in adb type this command adb reboot bootloader
Sent from my XT1022 using XDA Free mobile app
windows says usb device not recognized...
e.spirkoski said:
windows says usb device not recognized...
Click to expand...
Click to collapse
Dude. Don't connect to PC now.
First press volume down key and continue pressing volume down key with power button. U will be able to go in fastboot mod. Than connect with PC
Sent from my XT1022 using xda premium
nisu4717 said:
Dude. Don't connect to PC now.
First press volume down key and continue pressing volume down key with power button. U will be able to go in fastboot mod. Than connect with PC
Sent from my XT1022 using xda premium
Click to expand...
Click to collapse
I've sent it to a Repair Center, with a description of the device "Can't turn on after OTA update". Hope they fix it. Thanks everyone!
Related
please help .. does not turn on my phone. the display of the text is coming samsung samsung streaks appear again. will always continue to do so. recowery and does not download mode. usb jig does not work.
Do not have no one to help?
Ur fone is soft bricked.
Sent from my GT-S5830i using xda premium
You can't come into recovery mode or download mode?
Install Deodexed ROM in recovery or flash stock firmware with Odin.
Sent from my GT-S5830i using xda premium
umito35 said:
please help .. does not turn on my phone. the display of the text is coming samsung samsung streaks appear again. will always continue to do so. recowery and does not download mode. usb jig does not work.
Click to expand...
Click to collapse
If you are correctly pressing the combination for recovery (volup+home+power) or download mode (volup+voldown+power) and still not getting into recovery or download modes then I am guessing that you tried Ace GT-S5830 custom ROM (or any other incompatible one) on Ace-i GT-5830i, and your phone is not recognizing the key combinations. In that case, as domnic79 said your phone is bricked, and if USB jig is not working, the only way is to either claim it in warranty or use the JTAG method to unbrick your phone. If you somehow successfully get into download mode; use odin to flash multifirmware stock rom from this thread http://forum.xda-developers.com/showthread.php?t=1822109
RubenStauttener said:
You can't come into recovery mode or download mode?
Install Deodexed ROM in recovery or flash stock firmware with Odin.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
He can't go into download mode therefore phone will not be recognized in Odin and he can't flash anything
umito35 said:
Do not have no one to help?
Click to expand...
Click to collapse
Remove d battery. Press vol up + vol down + power (recovery mode) do not leave ur fingers off those buttons. Insert d battery while pressing d buttons. It worked for me. Might work for u.
Sent from my GT-S5830i using xda premium
I have kinda the same problem. I can use the combo both volume buttons and power button and I get Odin mode. Is there a chance I can save the phone?
Sent from my GT-S5830 using xda premium
alex_is_the_1 said:
I have kinda the same problem. I can use the combo both volume buttons and power button and I get Odin mode. Is there a chance I can save the phone?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Any phone going into Odin mode is salvageable. Just use Odin and flash away. Make sure you do it right. I would recommend you read tutorials and do it step by step. All the best, let us know how it goes.
Got it working but when i insert my sim card it loses signal like its been blocked
Sent from my GT-S5830i using xda app-developers app
alex_is_the_1 said:
Got it working but when i insert my sim card it loses signal like its been blocked
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
U can try calling your telco ask why u didnt get signal for your simcard.
alex_is_the_1 said:
Got it working but when i insert my sim card it loses signal like its been blocked
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Maybe the version you used via Odin had a region lock. How about try flashing a rom and then see if you get signal???
Hi guys,can anybody tell me where can I get cwm recovery? And how to use it????
Sent from my SK17i using xda premium
mdsohail98 said:
Hi guys,can anybody tell me where can I get cwm recovery? And how to use it????
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
You need unlocked bootloader or for locked bootloader this: WWW(DOT)play.google.com/store/apps/details?id=com.pvy.CWMinstaler&hl=cs
But, always you need root. It´s good for backups, installing ROMs and much more
Install x-parts from google play, start it, then hit Install CWM. Your phone must be rooted to do this.
I have installed it already guys!!!! After installing it said 'installation is complete please reboot and use the options'' how to use it further guys can anybody tell me???? All says,flash it via cwm but how flash any file????
Sent from my SK17i using xda premium
mdsohail98 said:
I have installed it already guys!!!! After installing it said 'installation is complete please reboot and use the options'' how to use it further guys can anybody tell me???? All says,flash it via cwm but how flash any file????
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Did you try rebooting into CWM?
Turn off the phone, then, turn it on again, when the sony logo comes up, wait abit for it to flash then spam the volume down button until it comes up.
If it still didn't work, spam the power button instead of volume down.
Sadra.. said:
Did you try rebooting into CWM?
Turn off the phone, then, turn it on again, when the sony logo comes up, wait abit for it to flash then spam the volume down button until it comes up.
If it still didn't work, spam the power button instead of volume down.
Click to expand...
Click to collapse
i did as you said after that phone goes in safe mode i mean safe mode is shown at left most side of the phone.....after that what should i do??????
mdsohail98 said:
i did as you said after that phone goes in safe mode i mean safe mode is shown at left most side of the phone.....after that what should i do??????
Click to expand...
Click to collapse
okay see what you should do exactly is that when you reboot your phone and the device turns on... as soon as you see the sony logo keep pressing the volume DOWN button and tadaaa you'll go to the cwm menu
if not keep pressing the volume DOWN button as soon as your phone vibrates after the reboot
click "THANKS" if it works
Try spamming volume up
Sent from my Live With Walkman using xda app-developers app
Thanx guys it works!!!!
Sent from my SK17i using xda premium
Pls guys help me.I was flaahed rom for .257 fw (i think.it was so fast)on .254.i was stuck on sony logo i can not shut down my phone or do anything(even when i hold power button for about 1min)
can you help me please i dont know what to do)
Really sorry admins for spam.but im scared.im bricked phone????
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
Pls guys help me.I was flaahed rom for .257 fw (i think.it was so fast)on .254.i was stuck on sony logo i can not shut down my phone or do anything(even when i hold power button for about 1min)
can you help me please i dont know what to do)
Really sorry admins for spam.but im scared.im bricked phone????
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
Remove the back cover and find the OFF button, you need to push it with a pencil while holding the power button at the same time until it vibrates or turns off.
PLEASE READ USER'S MANUAL
read this http://forum.xda-developers.com/showpost.php?p=43355247&postcount=2
Ok but i cant go into recovery or power on my phone.again stuck on sony logo
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
Ok but i can go into recovery or power on my phone.again stuck on sony logo
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
You may go into recovery to restore a backup...but not always works. If it keeps getting a boot loop you may need to use flashtool to repair it
Ok but can you give me instructions what to do
Sent from my ZTE Blade G using xda app-developers app
@KiaTheKing try this : in cwm go to storage and mount >> format /system. Then reboot. May this will help you.
Sent from my C5303 using XDA Premium 4 mobile app
I cant go in cwm
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
I cant go in cwm
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
Keep the phone turned off. Repair it with PC Companion or Update Service, both are Official Sony tools.
http://www.sonymobile.com/gb/tools/update-service/
Ok thanks i will try if someone has another solution pls post!
Ruchra said me that i must to flah ftf using flashtool can someone help me with this?and give detailed instructions how to flash it and what ftf to flash.thank you for support.
Sent from my ZTE Blade G using xda app-developers app
1) Download correct ftf from general section, general one for your device.
2) turn phone off with power button under the back cover till you get the 3 vibrations.
3) download flashtool and install all the drivers.
4) start flashtool and close PC companion ( if you have this open)
5) plug USB into phone
6) hold volume down and plug USB into pc, ( should get a green light on xperia sp on led for short time)
7) flashtool should identify device attached in flash mode.
8) select flash and use correct tft you downloaded earlier.
You may need to get files ready as phone can then load to Sony logo again after a few minutes. Got to flash it quick. May need to do it 2-3 times before you get the timing right, took me a few attempts. Hope this helps.
Sent from my Nexus 7 using xda app-developers app
Ok. Thanks. I will try it for about 3 hours.can you tell me.when i m in flastool and he regonize my phone do i go to flashmode and then choose my ftf in flastool/firmwares?
Sorry for my bad english!
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
Ok. Thanks. I will try it for about 3 hours.can you tell me.when i m in flastool and he regonize my phone do i go to flashmode and then choose my ftf in flastool/firmwares?
Sorry for my bad english!
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
yes you go to flashmod, but then you will need to browse and locate the file on your pc (where ever you downloaded it to) where is says firmwars use the box to the right to move through your drive and find the ftf. You should get something like a drop down list. For myself downloads go into my user download folder.
So long as your phone is turning on that is a good sign.
My phone reboots always when computer want to install driver for flashmod? what to do
bez_iom said:
yes you go to flashmod, but then you will need to browse and locate the file on your pc (where ever you downloaded it to) where is says firmwars use the box to the right to move through your drive and find the ftf. You should get something like a drop down list. For myself downloads go into my user download folder.
So long as your phone is turning on that is a good sign.
Click to expand...
Click to collapse
PLS HELP
The drivers are installed on the pc not the phone.
When the phone is fully off and you connect it yo pc by usb while holding volume down does the led go green for a short time.
bez_iom said:
The drivers are installed on the pc not the phone.
When the phone is fully off and you connect it yo pc by usb while holding volume down does the led go green for a short time.
Click to expand...
Click to collapse
Yup, and then phone go to sony logo!and when i go flash it says Error in processheader: 31 : A device attached
to do system is not functioning
Error flashing aborted
EDIT: i tried again and it starts to flash now i will se does it works.
Тhank you.You saved my life..
When mine was stuck on the logo I had a short time between pluging in USB +volume down and it booting to Sony Logo probably about 1-2 minutes. In that time I had to get the flashtool started, it look me a couple of attempts to get the files selected quick enough and ready to flash. Only suggestion is keep trying or move the ftf to flashtool firmwares folder so you can access ftf quicker and not have to worry about finding them.
KiaTheKing said:
Pls guys help me.I was flaahed rom for .257 fw (i think.it was so fast)on .254.i was stuck on sony logo i can not shut down my phone or do anything(even when i hold power button for about 1min)
can you help me please i dont know what to do)
Really sorry admins for spam.but im scared.im bricked phone????
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
Can you give some information about your phone.
Specifically the model, FW version and region of your subscription before you messed up.
---------- Post added at 09:50 AM ---------- Previous post was at 09:45 AM ----------
bez_iom said:
When mine was stuck on the logo I had a short time between pluging in USB +volume down and it booting to Sony Logo probably about 1-2 minutes. In that time I had to get the flashtool started, it look me a couple of attempts to get the files selected quick enough and ready to flash. Only suggestion is keep trying or move the ftf to flashtool firmwares folder so you can access ftf quicker and not have to worry about finding them.
Click to expand...
Click to collapse
when flashing an ftf file, your phone must be completely turned off, when the flashtool says "connect your device" what you're going to do is hold the VOL DOWN button while connecting your micro-usb to your phone, when you connect the usb to your phone, the green LED light must light and then when the light comes out, that's the only time you'll release the VOL DOWN button.
Glad it worked for you.
Sent from my Nexus 7 using xda app-developers app
Do exactly as follows, and your device will be fine..
first, keep the phone for charging.. that time u will either get a charging notification or a green led will be lit up, when u see either of these two,disconnect the device and it will stay off. Now move to the next step
Visit this link:
http://www.sonymobile.com/us/tools/pc-companion/
Click on Download PC Companion
Run the software and install it
Turn the phone off and disconnect it from the computer
1. No matter what the program says do not connect the phone until you complete step 9
2. In the welcome screen you will see the different modules available for you including the "Support Zone" option. Click on "Start" below it.
3. On the next page Click on "Start" under "Phone Software Update"
At this point if you get an error stating that "Unable to install update components" or "Server is busy" , then please proceed to step 12
4. The program will say that there is no phone connected. Click on the option below that reads: "Repair my phone" the program will issue you a warning about the content that you will lose during the update
5. Choose the option to continue.
6. The program will issue a final message warning you of possible data lost during the update. Click on the checkmark and then on "Next".
7. After that, the program will download the necessary information (5 to 6 minutes) and it will present you with a list of phones.
8. Choose your phones model from the list then click on "Next" then you will see a new section telling you how to connect the phone. (don't connect it yet)
At this point the phone must be off and disconnected from the PC.
9. Connect the cable to the PC not to the phone, then while pressing and holding the indicated button (in the steps on screen an specific button will be shown for you to press on the phone) connect the cable to the phone and keep holding the indicated button until the program says "the update of your phone has started..." (in some cases a message of "Installing drivers" will appear before the message of "the update of your phone has started..." is shown.)
Please do let me know if this has worked
I have an att lg optimus g with the xenon HD ROM it worked fine at first but now when I try to boot into recovery(I have TWRP) a:it doesn't want to and b: the phone just shuts off and I can't turn it on right aways I have to wait 10 or so minutes. Any help in this matter would be appreciated.
Sent from my Nexus 7 using xda app-developers app
jdaub89 said:
I have an att lg optimus g with the xenon HD ROM it worked fine at first but now when I try to boot into recovery(I have TWRP) a:it doesn't want to and b: the phone just shuts off and I can't turn it on right aways I have to wait 10 or so minutes. Any help in this matter would be appreciated.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Can you boot into the bootloader?
To enter bootloader, hold volume UP and power.
Upon entering the bootloader, you will notice that there is no 'menu' to enter fastboot or recovery. Unfortunately, since the stars didn't align properly, we were unable to tell the new bootloader where to load the images that contain the menu from.
In light of that, you'll have to navigate the menu blind. Use the volume keys to change selection, and the power key to select.
The choices are (in order of pressing volume down):
Start - boot the phone normally [already selected]
Restart Bootloader - reboot into the bootloader
Recovery Mode - enter recovery (CWM)
Power Off - powers the phone off
So, to get to Recovery, you would press volume down twice then power.
Thanks I'll try that out will post results shortly
Sent from my Nexus 7 using xda app-developers app
I tried that nothing comes up even while blind navigating nothing happens tried rebooting into both recovery and bootloader from the power down options and nothing other then this problem the phone works all except both Wi-Fi 4g Data but both were working when I first flashed the ROM
Sent from my Nexus 7 using xda app-developers app
Also when trying to go directly into the bootloader from when the phone is turned off its nothing but a black screen
Sent from my Nexus 7 using xda app-developers app
If you have the android-sdk boot into the rom, and try the command
adb reboot bootloader
or
adb reboot recovery
Ok I'll give that a shot I'll try it out when I get off work.
Sent from my HTC One X using xda app-developers app
Tried that as well nothing but a black screen on both attempts to boot into recovery/bootloader via android sdk
Sent from my HTC One X using xda app-developers app
jdaub89 said:
Tried that as well nothing but a black screen on both attempts to boot into recovery/bootloader via android sdk
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Maybe have a look at the Teenybin thread, most likely will need to use alt. version of it.
I can't even use LGNPST my phone won't even go into download mode! Very frustrating! But it isn't bricked cuz I can still boot into the ROM
thanks thanksthanks thanks
johnwayne007 said:
Can you boot into the bootloader?
To enter bootloader, hold volume UP and power.
Upon entering the bootloader, you will notice that there is no 'menu' to enter fastboot or recovery. Unfortunately, since the stars didn't align properly, we were unable to tell the new bootloader where to load the images that contain the menu from.
In light of that, you'll have to navigate the menu blind. Use the volume keys to change selection, and the power key to select.
The choices are (in order of pressing volume down):
Start - boot the phone normally [already selected]
Restart Bootloader - reboot into the bootloader
Recovery Mode - enter recovery (CWM)
Power Off - powers the phone off
So, to get to Recovery, you would press volume down twice then power.
Click to expand...
Click to collapse
thanks thanksthanks thanks
---------- Post added at 07:27 PM ---------- Previous post was at 07:17 PM ----------
jdaub89 said:
I tried that nothing comes up even while blind navigating nothing happens tried rebooting into both recovery and bootloader from the power down options and nothing other then this problem the phone works all except both Wi-Fi 4g Data but both were working when I first flashed the ROM
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
thanks thanksthanks thanks
jdaub89 said:
I can't even use LGNPST my phone won't even go into download mode! Very frustrating! But it isn't bricked cuz I can still boot into the ROM
Click to expand...
Click to collapse
Was your phone connected to computer while trying to enter download, and does your computer recognize that you have connected to it? Sorry if these sound like obvious questions but trying to rule out what we can.
Yes my phone was connected while trying to go into download mode. And when I plugged my phone into my computer it does recognize it.
Sent from my HTC One X using xda app-developers app
http://webchat.freenode.net/?channels=lg-optimus-g
I would ask for help in irc maybe ping Shelnutt or autoprime. I was going to suggest running freegee again to see what happens, bit am not sure if that would be risky. Wish I had a better answer.
jdaub89 said:
Yes my phone was connected while trying to go into download mode. And when I plugged my phone into my computer it does recognize it.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Phone should not be connected to your computer until your have the program running and the volume buttons pressed. So does your phone say download mode on screen ? You said your computer recognize it, does the program recognize it ?
Sent from my LG-E970 using xda app-developers app
Nothing comes on the screen when I try to go into download mode just a blank screen like it's off no backlight or anything. The program does show something when the phone is connected but still didn't work.
Sent from my HTC One X using xda app-developers app
How are you trying to enter download mode ? Be specific
Sent from my LG-E970 using xda app-developers app
While the phone is on I turn it off and then while it's completely off I hold both volume keys and press the power button. When I do that nothing comes up not even the boot screen.
Sent from my HTC One X using xda app-developers app
jdaub89 said:
While the phone is on I turn it off and then while it's completely off I hold both volume keys and press the power button. When I do that nothing comes up not even the boot screen.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
What is it listed as in device manager of PC?
I'll have to check it out then I'm at work atm will post what it's listed as in a few hours
Sent from my HTC One X using xda app-developers app
My galaxy k's home button has been broken.
And i wannted to use recovery.So I attached it with my computer, used cmd(adb reboot recovery).
After that i was able to go in recovery.
But after that I couldnt reboot it. I tried to use cmd. But it cant find my device.
Plz help....
ItsSoHard said:
My galaxy k's home button has been broken.
And i wannted to use recovery.So I attached it with my computer, used cmd(adb reboot recovery).
After that i was able to go in recovery.
But after that I couldnt reboot it. I tried to use cmd. But it cant find my device.
Plz help....
Click to expand...
Click to collapse
Have tried holding the power button to force it off?
Sent from my LG-LS980 using xda app-developers app
Critical Detox said:
Have tried holding the power button to force it off?
Sent from my LG-LS980 using xda app-developers app
Click to expand...
Click to collapse
i turned it off by taking off the battery.
but after i putted it back but it's still in recovery.
Plz Help!~