Anyone else notice this? Especially with a screen protector on I have noticed "dead" spots on the touch screen randomly show up and cause me problems.
When I first got my phone I had this issue. I had Verizon install their glass screen protector which I really liked, but I had random dead spots. I went to return it and of course they wouldn't take it back. I got a bit heated. I got the regular screen protector and have not had the issue since.
It was AWFUL with the all glass one for me, but is still noticeable even with a "flex" glass one that is just about the same thickness as a standard protector.
I am very curious if all G3s suffer from this.
my buddy with spigen glass doesn't seem to have the same touch issues I have with tech armor glass. once i get frustrated enough i'll get the spigen
I have the glass protector and sometimes I just want to throw the phone against the wall, especially when playing a game like GTA
I have had the zagg glass protector since i got the phone release day an have had the same problems but not enough to make me take it off i found out that when it happens i just turn the screen off and on then it fixes itself
I play Ingress on my G3, and with the 0.2mm iCarez tempered glass protector on it I get random areas where there is no touch sensitivity at all. Multiple presses, hard presses...nothing. Sometimes when I breath on my finger and try again it works for a while. Other areas work. Weird.
Since the iCarez has cracked in multiple places now and I am expecting a replacement, I could remove the shards and try it, but the One Plus seems much nicer overall, for screen touches. No protection on it though.
Happens to me to. I have the glass screen protector from the Verizon store. Sometimes I just wipe my fingers clean make sure they don't feel oily and sometimes that gets things going again. But yea its annoying
The thicker tempered glass screen protectors will result in this behavior in my experience. The icarez .2mm one is fine and has no touch issues that I can reproduce. The default verizon one they sell in the store near me is horrible.
muiriddin said:
The thicker tempered glass screen protectors will result in this behavior in my experience. The icarez .2mm one is fine and has no touch issues that I can reproduce. The default verizon one they sell in the store near me is horrible.
Click to expand...
Click to collapse
http://www.iloome.com/LG-G2-Screen-Protector-Flexible/dp/B00F4IIGMM
.12mm thick. The protector is not the problem that I can figure. I wonder if this design flaw is still being reproduced by LG or if they fixed it at some point. It is getting very old, very fast.
I had the Verizon tempered glass screen protector for about a week, and noticed areas of the screen that were nearly dead, especially along the edges. I removed the screen protector, and haven't had an issue since.
Morkai Almandragon said:
http://www.iloome.com/LG-G2-Screen-Protector-Flexible/dp/B00F4IIGMM
.12mm thick. The protector is not the problem that I can figure. I wonder if this design flaw is still being reproduced by LG or if they fixed it at some point. It is getting very old, very fast.
Click to expand...
Click to collapse
I have this one and still get the occasional area that I can't touch. Primarily seems to affect the top right corner area.
I have used this screen protector now on three phones. Never an issue with any of them and I am a heavy user.
Sent from my VS985 4G using Tapatalk 2
i also had issues that made me want to throw the phone at times.
started with the vzw tg (i didnt realize thats what they were selling me when i bought it), waste of $25 or whatever.
put it in the OB case, and it was all but unusable.
threw the TG in the trash and went with just the OB plastic. still got frequent dead spots. ordered a normal protector from extreme guard on ebay, where i normally get my protectors. took out the OB plastic, put the XG protector on the phone, put it back in the OB case, never had another issue.
Icarez matte screen protectors on Amazon are beautiful easy to install, scratch resistant and don't bring about sensitivity issues associated with tempered
Related
I can not believe my eyes when I see that I can actually see scratches on my screen. It only shows up when the screen is oily or fog up. When it is clean, they won't show even under direct light. That got to be some coating getting scratched. Can others provide some insights on that?
http://goo.gl/TmBeL
Check this video. It is possible to get scratch even if you got Gorilla glass.
(The Amaze is not gorilla glass but it is a reinforced glass that similar to Gorilla glass.)
It is better to have a cheap screen protector on the screen all the time.
yep, welcome to my world, I was being stupid and didn't get a cover for mine...My nexus one lasted for a year after I took off the screen cover with no scratches, I don't know what kind of glass HTC is using now, they say its fortified, it still doesn't mean scratch proof:
read this thread i made a while back.
http://forum.xda-developers.com/showthread.php?t=1422964&highlight=warning
---------- Post added at 10:36 PM ---------- Previous post was at 10:31 PM ----------
papcoz said:
http://goo.gl/TmBeL
Check this video. It is possible to get scratch even if you got Gorilla glass.
(The Amaze is not gorilla glass but it is a reinforced glass that similar to Gorilla glass.)
It is better to have a cheap screen protector on the screen all the time.
Click to expand...
Click to collapse
we're not sure if amaze is gorilla glass or not, as gorilla says in their FAQ that they do not realease the information of all the phones that have gorilla glass on them...due to agreement between the sellers like HTC. It definitely is fortified glass of some sorts, but yea even gorilla glass gets scratched..
As someone who keeps a single phone for years, I never understood the mentality that says one should have a screen protector. Now hear me out: I understand that the screen protector is supposed to protect the screen from being scratched. If the purpose of not scratching the screen is purely aesthetic, then the screen protector is useless, if not so beyond useless that it becomes an aesthetic liability. Screen protectors are no where near as hard as the combination of glass and coatings that compose the screen itself. Across the useable life of the phone, the thin plastic of a screen protector is much more likely to accumulate scratches than the glass. And so in the end it comes to be that the people who are most concerned about preserving the aesthetics of a mint-condition phone have one that is shrouded by an ugly protective case and a screen protector covered in hundreds of scratches that would not otherwise register on the glass.
But more towards the original concern: whether or not the screen is Gorilla(TM) glass, a similar glass, regular glass, or even pure and impossibly cut diamond, the anti-fingerprint and -reflective coatings sitting atop would not benefit from their scratch-resistant properties. My screen also has this problem. It only shows up when there is significant oil or fingerprints on the screen. I find the latter much more annoying. So I constantly wipe the phone on my pants or sweater and it's back to normal.
mischivo said:
As someone who keeps a single phone for years, I never understood the mentality that says one should have a screen protector. Now hear me out: I understand that the screen protector is supposed to protect the screen from being scratched. If the purpose of not scratching the screen is purely aesthetic, then the screen protector is useless, if not so beyond useless that it becomes an aesthetic liability. Screen protectors are no where near as hard as the combination of glass and coatings that compose the screen itself. Across the useable life of the phone, the thin plastic of a screen protector is much more likely to accumulate scratches than the glass. And so in the end it comes to be that the people who are most concerned about preserving the aesthetics of a mint-condition phone have one that is shrouded by an ugly protective case and a screen protector covered in hundreds of scratches that would not otherwise register on the glass.
But more towards the original concern: whether or not the screen is Gorilla(TM) glass, a similar glass, regular glass, or even pure and impossibly cut diamond, the anti-fingerprint and -reflective coatings sitting atop would not benefit from their scratch-resistant properties. My screen also has this problem. It only shows up when there is significant oil or fingerprints on the screen. I find the latter much more annoying. So I constantly wipe the phone on my pants or sweater and it's back to normal.
Click to expand...
Click to collapse
I can scratch the "coating" with a new walmart bag. It is just annoying. I am sure htc is using gorilla glass. They used it in their other products. Doesn't make sense they will drop out from that.
I would use a TPU case on the phone because the naked phone is too slippery to hold. Scratches won't affect performance, but dropping it will render the phone non functional.
mischivo said:
As someone who keeps a single phone for years, I never understood the mentality that says one should have a screen protector. Now hear me out: I understand that the screen protector is supposed to protect the screen from being scratched. If the purpose of not scratching the screen is purely aesthetic, then the screen protector is useless, if not so beyond useless that it becomes an aesthetic liability. Screen protectors are no where near as hard as the combination of glass and coatings that compose the screen itself. Across the useable life of the phone, the thin plastic of a screen protector is much more likely to accumulate scratches than the glass. And so in the end it comes to be that the people who are most concerned about preserving the aesthetics of a mint-condition phone have one that is shrouded by an ugly protective case and a screen protector covered in hundreds of scratches that would not otherwise register on the glass.
But more towards the original concern: whether or not the screen is Gorilla(TM) glass, a similar glass, regular glass, or even pure and impossibly cut diamond, the anti-fingerprint and -reflective coatings sitting atop would not benefit from their scratch-resistant properties. My screen also has this problem. It only shows up when there is significant oil or fingerprints on the screen. I find the latter much more annoying. So I constantly wipe the phone on my pants or sweater and it's back to normal.
Click to expand...
Click to collapse
Point taken but sometimes deep scratches are not aesthetics, its just intrusive to your daily work, so you're better off getting a screen protector, than have a deep scratch in your screen that can cost you a couple of hundred bucks to fix
I had my Hero for about 2 years. I put a screen protector on it right away. After about a month the it looked abolutely terrible. It was marked and scratched and had bubbles. Ugly. I pulled the screen protector off and never put another one on. the screen was as nice the day I sold it as it was the day I bought it. I have no intention of putting a screen protector on my Amaze. The beauty of the screen is, after all, one of the reasons I chose this phone.
marleyfan61 said:
I had my Hero for about 2 years. I put a screen protector on it right away. After about a month the it looked abolutely terrible. It was marked and scratched and had bubbles. Ugly. I pulled the screen protector off and never put another one on. the screen was as nice the day I sold it as it was the day I bought it. I have no intention of putting a screen protector on my Amaze. The beauty of the screen is, after all, one of the reasons I chose this phone.
Click to expand...
Click to collapse
Don't make the same mistake I did...you will regret it. I though the same at first. I mean my other phones did fine without screen protectors, but seems like for some reason this screen scratches quick...I'm very careful with my phone and I was suprised to see a deep scratch on it, I had no Idea how!!! just letting you know...I made the same exact mistake and posted the same thing in the accessories section, stated why people were putting screen protectors on their phones, and how it wasn't necessary.
http://forum.xda-developers.com/showthread.php?t=1353158&highlight=screen&page=2
read post 16 and 18 made by me, i thought the same exact thing. even gorilla glass gets scratched , just spend 6 bucks get a boxwave one...at first I didn't like it, thought it was a bit sticky but after using it for a fewe days its smooth as the glass and you don't even notice it AT ALL NowI love it!!! It's exactly like the glass itself!!
Maybe you should mention that in the accessories thread, before people begin to think you still hate Boxwave and then they steer away from it.
Raydonn said:
Maybe you should mention that in the accessories thread, before people begin to think you still hate Boxwave and then they steer away from it.
Click to expand...
Click to collapse
you're right, I will
crazypotato said:
I can scratch the "coating" with a new walmart bag. It is just annoying. I am sure htc is using gorilla glass. They used it in their other products. Doesn't make sense they will drop out from that.
I would use a TPU case on the phone because the naked phone is too slippery to hold. Scratches won't affect performance, but dropping it will render the phone non functional.
Click to expand...
Click to collapse
Your last is a very good point. I made an oversight. Drop protection cases are useful.
Ok, I guess I may have a problem with my screen (again). After removing one of those gadgetshieldz protectors (wet apply) the screen looks weird, especially when displaying white. It looks like there's some dirt on it making it look pixelated and greyish, while just a couple of weeks ago the whites were super crisp. It really seems like it's the glass to be blamed, because you can actually see the text sliding below this sort of "dirt" when you scroll. However when the screen is turned off it looks perfectly clean. I think the problem can be caused by the coating wearing off, possibly damaged by the screen protector...I also got a "stickier" area around the earpiece that has the coating obviously wearing off, because it collects dirt and smudges much more than the rest of the screen, but that would be a whole different story, I've heard of many others with the same issues, but frankly it doesn't even bother me. I'll try to get the phone replaced or at least repaired next week, this is ridiculous, I have a phone with an HD screen looking more fuzzy and pixelated than my GF's 710. You may say that I shouldn't have applied the screen protector and whatnot, but frankly I've been using these protectors on my old 800 for a year and the screen is mint. I'm afraid there's something very wrong with the coating of the 920, I suggest you to be very careful with screen protectors, maybe paradoxically going naked is less dangerous...
Anyone having similar issues?
I'm trying to collect some feedback from the users here, just to make sure that my screen isn't faulty. I'd like to use a screen protector on this guy because I'd like to keep it for quite some time, but obviously if it's a no go I'll just try to be careful...
The problem is the Gorilla Glass that the 920 has. It is not really Glass but more of a material similar to what they make safety glasses from. It can be etched by certain chemicals as well as mineral deposits in the water you used to apply it. You are supposed to used distilled water to apply those types of protectors. The best yet is to get a protector such as the Otterbox Defender that has the screen protector built in but is never actually secured to the screen in any way. it just makes contact as you press it. So are hard water stains and they might be able to be removed with lemon juice and cotton swaps.
Solarenemy68 said:
The problem is the Gorilla Glass that the 920 has. It is not really Glass but more of a material similar to what they make safety glasses from. It can be etched by certain chemicals as well as mineral deposits in the water you used to apply it. You are supposed to used distilled water to apply those types of protectors. The best yet is to get a protector such as the Otterbox Defender that has the screen protector built in but is never actually secured to the screen in any way. it just makes contact as you press it. So are hard water stains and they might be able to be removed with lemon juice and cotton swaps.
Click to expand...
Click to collapse
Thanks for the tip...I'll try this out as soon as I get home. If the screen doesn't get clean I'll still try to get the phone repaired, I may get lucky. I'll report back here how it goes. One more thing, do you think that a DIY solution like Fusso Smartphone may do the trick if the damage is just on the coating?
Not sure how that will work since this display is not really glass. For me the phone is too expensive of an investment to try that on. I will just stick with my Otterbox Defender that yes the wireless charger works through.
I will be just coating the back of my yellow 920 to protect it from scratches using best skins ever will leave the front after reading this.
Just a quick update: the lemon juice trick didn't work, probably the damage is real, it's not just hardcore dirt or whatever. Also, I got that Fusso Smartphone thing in the mail today so I decided to take my chances and try it, and it doesn't seem to work. Sure the screen feels smoother but nothing other than that. Actually I'm not even sure the damage is in the coating, to be honest, because if it's just that you're not supposed to get noisy and dirty whites when the screen is on, just more smudges on the glass. Hopefully they'll do something about it at the repair center, maybe they'll cosider it a manifacturing defect and won't charge me for the repair, fingers crossed...
I'll report back.
Solarenemy68 said:
The problem is the Gorilla Glass that the 920 has. It is not really Glass but more of a material similar to what they make safety glasses from. It can be etched by certain chemicals as well as mineral deposits in the water you used to apply it. You are supposed to used distilled water to apply those types of protectors. The best yet is to get a protector such as the Otterbox Defender that has the screen protector built in but is never actually secured to the screen in any way. it just makes contact as you press it. So are hard water stains and they might be able to be removed with lemon juice and cotton swaps.
Click to expand...
Click to collapse
Do you know if ZAGG Invisible Shield could damage 920's screen also?
http://goo.gl/6EmyL
Regads,
Well I went ahead and put bestskinsever full body skin on seems fine to me but I ain't gonna peel the front skin off now but it looks ok.
fbirraque said:
Do you know if ZAGG Invisible Shield could damage 920's screen also?
http://goo.gl/6EmyL
Regads,
Click to expand...
Click to collapse
I have a Zagg Ivisible Shield on but I haven't tried to remove it yet. I can say it sucks that Zagg only has the regular shield for the Windows Phone devices because the HD shield on my LG Optimus G is absolutely gorgeous but the one on my 920 has pits in it and is very sticky. I was going to try and get it replaced under warranty, if I do that I will see if the issue he talks about above happens.
---------- Post added at 08:48 PM ---------- Previous post was at 08:22 PM ----------
vnvman said:
Ok, I guess I may have a problem with my screen (again). After removing one of those gadgetshieldz protectors (wet apply) the screen looks weird, especially when displaying white. It looks like there's some dirt on it making it look pixelated and greyish, while just a couple of weeks ago the whites were super crisp. It really seems like it's the glass to be blamed, because you can actually see the text sliding below this sort of "dirt" when you scroll. However when the screen is turned off it looks perfectly clean. I think the problem can be caused by the coating wearing off, possibly damaged by the screen protector...I also got a "stickier" area around the earpiece that has the coating obviously wearing off, because it collects dirt and smudges much more than the rest of the screen, but that would be a whole different story, I've heard of many others with the same issues, but frankly it doesn't even bother me. I'll try to get the phone replaced or at least repaired next week, this is ridiculous, I have a phone with an HD screen looking more fuzzy and pixelated than my GF's 710. You may say that I shouldn't have applied the screen protector and whatnot, but frankly I've been using these protectors on my old 800 for a year and the screen is mint. I'm afraid there's something very wrong with the coating of the 920, I suggest you to be very careful with screen protectors, maybe paradoxically going naked is less dangerous...
Anyone having similar issues?
I'm trying to collect some feedback from the users here, just to make sure that my screen isn't faulty. I'd like to use a screen protector on this guy because I'd like to keep it for quite some time, but obviously if it's a no go I'll just try to be careful...
Click to expand...
Click to collapse
Your right, I just took off my Zagg Invisible Shield after ordering a replacement and i see the same thing all in my White. Dammit, going to have to ask for a replacement.
For what it's worth, I originally had no screen protector on my 920. One day I accidentally dropped and stepped on the phone (was playing table tennis and it fell out of my pocket). The screen got a very nasty scratch right across the front. Luckily for me my earpiece died and I needed to get the phone replaced under warranty.
Got a replacement phone and chucked a screen protector on it as soon as I opened it. Absolutely no issues with it, even when replacing the protector. Admittedly I'm not using a wet-apply protector, which is definitely more obvious, but apparently it doesn't damage the coating.
skrundarlow said:
For what it's worth, I originally had no screen protector on my 920. One day I accidentally dropped and stepped on the phone (was playing table tennis and it fell out of my pocket). The screen got a very nasty scratch right across the front. Luckily for me my earpiece died and I needed to get the phone replaced under warranty.
Got a replacement phone and chucked a screen protector on it as soon as I opened it. Absolutely no issues with it, even when replacing the protector. Admittedly I'm not using a wet-apply protector, which is definitely more obvious, but apparently it doesn't damage the coating.
Click to expand...
Click to collapse
Hey, I want to find a 'dry' screen protector. What protector are are you using?
Nimdock said:
Hey, I want to find a 'dry' screen protector. What protector are are you using?
Click to expand...
Click to collapse
There are hundreds of them. Just look for Lumia 920 screen protector on ebay. Or better yet get yourself an Otterbox Defender that has the screen protector built in.
Solarenemy68 said:
There are hundreds of them. Just look for Lumia 920 screen protector on ebay. Or better yet get yourself an Otterbox Defender that has the screen protector built in.
Click to expand...
Click to collapse
Well, the whole point of the question was to get someone's opinion on a protector they have tried (good/bad) instead of blindly trying a random one.
I would never put my phone in one of those cases.
Nimdock said:
Well, the whole point of the question was to get someone's opinion on a protector they have tried (good/bad) instead of blindly trying a random one.
I would never put my phone in one of those cases.
Click to expand...
Click to collapse
Too bad then. Your phone won't survive a 1 story drop like mine will then. Ypu also can't step on yours and not have it damaged. Also what exactly is wrong with "one of those cases"? It fully protects your 600 USD investment from most dangers that a phone can encounter in it's life. Personally if it is about showing the phone of, I could care less. i don't need a status symbol. If I did I would have bought an iPhone <cringe>..
I have used the Otterbox for every phone I have owned till the day came to sell each one. At which time they all looked like they just came out of the box and could have easily been sold as brand new.
You wanted an opinion on a tried protector, well here you go.
Solarenemy68 said:
Too bad then. Your phone won't survive a 1 story drop like mine will then. Ypu also can't step on yours and not have it damaged. Also what exactly is wrong with "one of those cases"? It fully protects your 600 USD investment from most dangers that a phone can encounter in it's life. Personally if it is about showing the phone of, I could care less. i don't need a status symbol. If I did I would have bought an iPhone <cringe>..
I have used the Otterbox for every phone I have owned till the day came to sell each one. At which time they all looked like they just came out of the box and could have easily been sold as brand new.
You wanted an opinion on a tried protector, well here you go.
Click to expand...
Click to collapse
What's wrong with them is that I don't like them, hehe... You do understand different people have different tastes. I am glad your phone will survive all kinds of catastrophic events though.
skrundarlow said:
For what it's worth, I originally had no screen protector on my 920. One day I accidentally dropped and stepped on the phone (was playing table tennis and it fell out of my pocket). The screen got a very nasty scratch right across the front. Luckily for me my earpiece died and I needed to get the phone replaced under warranty.
Got a replacement phone and chucked a screen protector on it as soon as I opened it. Absolutely no issues with it, even when replacing the protector. Admittedly I'm not using a wet-apply protector, which is definitely more obvious, but apparently it doesn't damage the coating.
Click to expand...
Click to collapse
I would advise not using any screen protector on a Gorilla 2 glass, which is very resistant though not indestructible. Screen protectors use sticky chemicals that tend to alter colors if only slightly.
gilesrm said:
I would advise not using any screen protector on a Gorilla 2 glass, which is very resistant though not indestructible. Screen protectors use sticky chemicals that tend to alter colors if only slightly.
Click to expand...
Click to collapse
I myself have been using a variety of matte screen protectors. Not to protect the screen, but for it to be more readable. I prefer matte over glossy. So far no issues.
Well, as Yogi Berra used to say, "If It Ain't Broke, Don't Fix It." One question though: does this screen protector affect screen readibility in full light, which, considering, is quite good for the 920 -provided the brightness setting is on "auto", sunlight readibility on "auto" too. The possibilty to adjust the color profile (temperature and saturation) is also a good feature on the 920.
Zagg going brown
Has anyone also noticed zagg discolour on area of high use(my right side used for scrolling). This is my second protector and same thing happened. It has not damaged the actual phone, I have been using for almost full year now. I have backup one ready to install, as I don't want to be without during warranty replacement waiting time.
gilesrm said:
Well, as Yogi Berra used to say, "If It Ain't Broke, Don't Fix It." One question though: does this screen protector affect screen readibility in full light, which, considering, is quite good for the 920 -provided the brightness setting is on "auto", sunlight readibility on "auto" too. The possibilty to adjust the color profile (temperature and saturation) is also a good feature on the 920.
Click to expand...
Click to collapse
In my experience it doesn't impair readability, but if your installation has orange peel effect the reflections will be a bit annoying.
Vangink said:
Has anyone also noticed zagg discolour on area of high use(my right side used for scrolling). This is my second protector and same thing happened. It has not damaged the actual phone, I have been using for almost full year now. I have backup one ready to install, as I don't want to be without during warranty replacement waiting time.
Click to expand...
Click to collapse
Yep zaggs sawk. They become yellowish very quickly compared to other brands and normally have the most orange peel effect. They sure are the toughest but they also look the worse.
Zerolemon 9H Ultra Glass Armor: Tempered Glass Screen Protector
Unboxing:
I received a review unit from Zerolemon. The screen protector was sent in a bubble wrapped package. The packaging on the screen protector itself is thin poster board with plastic cut outs for the various pieces. It came with the screen protector itself, a small micro-fiber cloth and an alcohol wipe.
Installation:
Zerolemon has installation instructions printed on the poster board packaging. I didn’t need them, but for though who do, the instructions don’t make sense at all. Luckily the pictures convey much more than the written instructions do.
I applied the screen protector in my bath-room after I had the hot water running in the shower for about 10 minutes to minimize any dust particles that were in the air. I tried using the micro-fiber cloth to clean the screen of any residual oil and particles. It did a good job getting rid of oily residue, but is horrible at picking up dust, which might be due to the cloth being tiny (2”x2”). Then I used the alcohol wipe to wipe down the screen one more time. That did the trick. It removed the rest of the particles.
After taking a plastic film off the screen protector I placed it on my phone. The great thing about it is that you can move it slightly to get it to fit perfectly then tap the middle of the screen and the screen protector will adhere to the screen like magic! I didn’t have any issues with bubbles.
Initial Impressions:
The screen protector is much thicker than a plastic one. It somewhat hides the home button because the screen protector is thicker than the protruding button. Not really an issue with me because I actually prefer that so I don’t accidentally press the home button when the phone is in my pocket, but it might bother others. Powering on my device and testing the responsiveness of the screen, the first thing I noticed how nice it felt to touch. Feels just like the glass on the phone. With the rounded edges I wasn't able to feel where the screen protector started and ended from edge to edge of the phone.
The screen’s responsiveness was noticeably diminished. All gestures and taps had to be deliberate for the phone to register the touch. I use the S-Pen quite often to create illustrations on the device. For regular navigation using the S-Pen it operated like normal, but I noticed that I had to push harder while doodling on the screen or using the hand writing recognition. Due to the diminished responsiveness I did have to go into “Settings>Controls>Auto-adjust touch sensitivity” and enable that option so that the screen would return to normal.
Viewing angles are comparable to naked screen.
I will update again in about 2 weeks after I’ve had more time to put it through the torture test of life.
Any info on how thick it is, it looks exactly like the same as the MIME Feather Glass. I use the s-pen with the MIME and I didn't have to turn up the sensitivity but it's only .15mm thick.
airmaxx23 said:
Any info on how thick it is, it looks exactly like the same as the MIME Feather Glass. I use the s-pen with the MIME and I didn't have to turn up the sensitivity but it's only .15mm thick.
Click to expand...
Click to collapse
It's 0.3mm according to their website.
I hope to be receiving mine soon and will comment on the touch screen responsiveness as well. I currently use a 0.4mm thick glass screen protector (it started to bubble randomly, so I needed a new one anyways), and haven't noticed any reduction in responsiveness, so hopefully my experience will be able to provide a different experience than the OP (especially as I'm going from glass to glass, while it appears as though OP went from plastic to glass, which in my opinion is an incomparable difference).
I just received my review unit as well. It's very thin and barely noticeable. I'm using it with my ZeroLemon Extended Battery and it fits perfectly under the case. I haven't had screen responsiveness issues as mentioned in the OP.
I'll post pics up a little later.
Sent from my SM-G900V using Tapatalk
received mine zerolemon screen guard today also. Will ihave to pop off the build in screen protector on this zerolemon case I'm using, in order to use the tempered glass protector? thanks
dschoenike
dschoenike said:
received mine zerolemon screen guard today also. Will ihave to pop off the build in screen protector on this zerolemon case I'm using, in order to use the tempered glass protector? thanks
dschoenike
Click to expand...
Click to collapse
The screen protector wasn't built in on my case.
If yours has one built in, then you should probably remove it.
Sent from my SM-G900V using Tapatalk
I got my review unit today and its pretty good. Mouahmong's review is almost spot on. If you know how to apply a screen protector you are good to go. However, if you have never done it before, watch a Youtube video because the instructions shown on the inside of the package are terribly written.
My advice on applying (especially if your house/apartment or wherever you live is dusty) do it after a hot shower. Doing so will let the dust settle.
The screen protector does have somewhat rounded edges so it's not sharp unlike some other cheaper tempered glass screen protectors. However, with a 0.3mm thickness, you won't even be able tell.
I didnt have much of an issue with the home button after applying the screen protector. Some other brands will provide a stick on item to put on top of the home button so its easier to press, but with this screen protector being pretty thin (0.3mm) you wont need it IMO.
Other than that, so far so good. If I find any cons, I'll update this review.
haza12d said:
The screen protector wasn't built in on my case.
If yours has one built in, then you should probably remove it.
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
thanks for the answer. I figured I would probably need to remove it. thanks again for responding.
dschoenike
Hey everyone I haven't received my test piece yet but I was wondering about the link zerolemon provided it doesn't take me anywhere to provide feedback or suggestions.
Sent from my SM-G900A using XDA Premium 4 mobile app
Here are some pics with the Tempered Glass Screen Protector paired with the ZeroLemon Extended Battery/Rugged Case. This thing is very thin. The previous glass screen protector I had installed was too thick and caused the top corners to lift up. No problem here. Fits like a glove.
Installed the zerolemon screen protector a few days ago and ABSOLUTELY LOVE IT with my 10,000 mah battery and rugged case! I never liked screen protectors because I thought they took away the OEM glass feel and clarity. I now admit my past reservations were completely wrong and I will never have my phone screens go naked again! The zerolemon glass screen protector fits like a glove with the 10,000 mah battery and rugged case and I would strongly recommend the protector to everyone who owns the rugged case to give this a shot. Last thing, the cost of this is better than most of the other name brand protectors out there.
How is it in sunlight? Does it glare a lot?
sd97cl said:
How is it in sunlight? Does it glare a lot?
Click to expand...
Click to collapse
Haven't tried it in sunlight but it should glare just as much as the regular glass.
This isn't a anti glare screen protector.
So far it does well in direct sunlight. Minimal glare. Similar to stock naked.
Sent from my SM-N900T using XDA Free mobile app
sd97cl said:
How is it in sunlight? Does it glare a lot?
Click to expand...
Click to collapse
It is the same as the OEM glass screen, no better and no worse. I think the glass protector feels smoother than the OEM screen. Maybe it's because the oleophobic coating was starting to wear off but I swear the new screen protector feels buttery smooth when I swipe my finger or use the s pen.
DarkManX4lf said:
I got my review unit today and its pretty good. Mouahmong's review is almost spot on. If you know how to apply a screen protector you are good to go. However, if you have never done it before, watch a Youtube video because the instructions shown on the inside of the package are terribly written.
My advice on applying (especially if your house/apartment or wherever you live is dusty) do it after a hot shower. Doing so will let the dust settle.
The screen protector does have somewhat rounded edges so it's not sharp unlike some other cheaper tempered glass screen protectors. However, with a 0.3mm thickness, you won't even be able tell.
I didnt have much of an issue with the home button after applying the screen protector. Some other brands will provide a stick on item to put on top of the home button so its easier to press, but with this screen protector being pretty thin (0.3mm) you wont need it IMO.
Other than that, so far so good. If I find any cons, I'll update this review.
Click to expand...
Click to collapse
So your saying to install it after a hot shower as in install the unit on your phone in the bathroom? Ive heard of the method before but didn't quite understand.
xbmoyx said:
So your saying to install it after a hot shower as in install the unit on your phone in the bathroom? Ive heard of the method before but didn't quite understand.
Click to expand...
Click to collapse
People recommend installing in the bathroom because steam from the hot water will prevent dust particles from floating in the air.
Sent from my SM-N900T using XDA Free mobile app
I love it so far. The packaging is nothing fancy but the product is top notch. I previously had the Nillkin tempered glass and this one is identical to it which is a good thing. All the cutouts are perfect. It feels just like the naked screen. The price is very much reasonable unlike those other brands selling them for $20+ and the quality is the same.
Sent from my Galaxy Note 3
I just received my review unit and will update this thread with my review in a few days. I did notice though after installing the screen protector there is a "bubble" in the top portion of the screen right overtop the notification panel and directly under the Samsung logo. I thought maybe I installed it wrong or slightly sideways so I very gently pulled it back up making sure I didn't touch the sticky backing and realigned the glass with the home button and pressed it back down firmly. The "bubble" is still present but a tad smaller then it was originally. I kept rubbing the screen hoping to eliminate the bubble like other brand plastic type screen protectors and no dice. I will give it a few days and hopefully it will work itself out. I hope I didn't somehow get a "defective" glass that wasn't completely flat which is causing this bubble. See attached pic showing the "bubble" and the packaging stating it has "Bubble Free Installation". [emoji53]
xbmoyx said:
I just received my review unit and will update this thread with my review in a few days. I did notice though after installing the screen protector there is a "bubble" in the top portion of the screen right overtop the notification panel and directly under the Samsung logo. I thought maybe I installed it wrong or slightly sideways so I very gently pulled it back up making sure I didn't touch the sticky backing and realigned the glass with the home button and pressed it back down firmly. The "bubble" is still present but a tad smaller then it was originally. I kept rubbing the screen hoping to eliminate the bubble like other brand plastic type screen protectors and no dice. I will give it a few days and hopefully it will work itself out. I hope I didn't somehow get a "defective" glass that wasn't completely flat which is causing this bubble. See attached pic showing the "bubble" and the packaging stating it has "Bubble Free Installation". [emoji53]
View attachment 2863973
View attachment 2863974
Click to expand...
Click to collapse
Mine went on smooth without any bubbles. Maybe you got a bad one?
Sent from my Galaxy Note S5
Well I put a bodyguardz pure glass screen protector on my phone and now screen taps don't register a lot of the times, especially at the edges. Anyone else with this issue?
dmystic1 said:
Well I put a bodyguardz pure glass screen protector on my phone and now screen taps don't register a lot of the times, especially at the edges. Anyone else with this issue?
Click to expand...
Click to collapse
This is a known issue with the glass protectors and our phone and I'd imagine other phones as well.
Fortunately mine is great and I haven't had this issue really at all. Mine is a Zagg. Maybe look into one of those or at least one that's thinner.
Mistertac said:
This is a known issue with the glass protectors and our phone and I'd imagine other phones as well.
Fortunately mine is great and I haven't had this issue really at all. Mine is a Zagg. Maybe look into one of those or at least one that's thinner.
Click to expand...
Click to collapse
It's going to be dependent on the screen protector.
I have one of the cheap ones (~6.00 eBay) and never have an issue. -> http://www.ebay.com/itm/131240105653?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Since they were cheap and good, I bought two additional.
I have been reading around and many are having issues with Bodyguardz. I reached out them and they say they have not had one complaint and insist it is not caused by the protector but a firmware problem, and pretty much get lost.
I have noticed multiple threads about this when searching. Seems people mainly have touch screen sensitivity issues when using some type of tempered glass, and when they remove it, the issue goes away. Now obviously this is a hardware/software issue on LG's part, but I would like to take a poll. I am surprised no one has come up w/ a method to increase the touch sensitivity via software modding. Thanks guys!
Note: I have the iloome flex on mine, which is very thin, and still have the issues. Trying to figure out if I should remove it and flush that $ down the drain, but I will if it will fix the problem.
in_dmand said:
I have noticed multiple threads about this when searching. Seems people mainly have touch screen sensitivity issues when using some type of tempered glass, and when they remove it, the issue goes away. Now obviously this is a hardware/software issue on LG's part, but I would like to take a poll. I am surprised no one has come up w/ a method to increase the touch sensitivity via software modding. Thanks guys!
Note: I have the iloome flex on mine, which is very thin, and still have the issues. Trying to figure out if I should remove it and flush that $ down the drain, but I will if it will fix the problem.
Click to expand...
Click to collapse
dont do it it wont help ive had glass protectors plastic protector and even no protector i have the issue its a few roms i get the iissue
Have the zagg tempered glass and have the issue. Its quite annoying I was a little surprised we couldn't adjust the sensitivity somehow. Anyways for 40$ I just deal with it
Sent from my LG-VS985 using XDA Free mobile app
I bought the $7 White colored Glass screen protector off of eBay from China for me and a friend and we both have the same issue. It looks cool but I rather have to press a little harder in the corners to have the screen protected that extra little bit. I did find that it does respond and work easier without a case on though.
The vzw glass is trash, the zero lemon glass works pretty good. I can't say I have no issues, but its pretty rare. Its always the same spot, but I think its how the case rides on the glass in that area causing the rare issue.
The vzw glass it was many areas, and I was constantly rotating the phone to get letters where they worked. I think it lasted 2 days before I threw it in the trash.
Went back to my tried and true extreme guard film protector from eBay, no issues. Got the zl glass when I got the zl battery months ago, been happy ever since.
Had a 0.3mm icarez protector that got removed when I a warranty issue and had to send it in to get fixed (nothing related to screen). They (LG) removed it. I used the phone for a couple weeks naked and definitely noticed an increase in sensitivity. Then tried 0.2mm icarez and noticed little if no change, basically MUCH better than 0.3mm. My 0.02
My iCarez 0.2mm protector cracked itself while I was flying across to Seattle. iCarez promised to replace it but never did. It protected the screen anyway, until I removed it last week. The screen sensitivity was pretty unreliable, particularly at the upper edge, but removing the cracked iCarez made no difference.
I loosened the screws a bit in the back and that might have helped. It was so bad I could not glyph hack In Ingress !
Sent from my VS985 4G using Tapatalk
The .3 vs the .2 is the difference for my phone. With a .2 thickness it is identical to having nothing on the glass.
muiriddin said:
The .3 vs the .2 is the difference for my phone. With a .2 thickness it is identical to having nothing on the glass.
Click to expand...
Click to collapse
well the iloome flex is .15 I believe and I still had issues... I went ahead and removed it and the issues seem to be gone. 4 down the drain i guess...
in_dmand said:
well the iloome flex is .15 I believe and I still had issues... I went ahead and removed it and the issues seem to be gone. 4 down the drain i guess...
Click to expand...
Click to collapse
I had the .3 VZW glass one and did have a few occassional, minor issues. The .2 Icarez and the .2 iloome have both been fine for me. No issues at all.
Its random for me.....there are days where nothing register on the keyboard and sometimes its only the edges...? I have the zagg glass one