Hello
Today i experience tis Problem. My HTC One Max touch is automatically Working. it automatically touches in Top Left corner of the screen. I factory reset and remove scratch guard also. Still Have this problem. It automatically touches that area. I bought this in Dubai. I contact HTC customer support they said Service and Support are limited in india for Overseas devices. What can i do Now. Any Experts plz help. I already search internet for Spare parts. Found this in Here http://www.etradesupply.com/htc-one-max-digitizer-touch-screen-black.html
can i replace it myself. Plz help.
You could if you have a donor device and are good at small electronics. I've done it before.
Related
Hi,
I have a Touch Pro CDMA. Recently my phone has developed a weird issue. The touch screen and the keys on the front face would just go blank/dead. If I removed the battery and powered the phone again. The vibration at the start would indicate that the phone has started and also the boot-up sounds, etc would be played.
If I left the phone in OFF mode for sometime, it would start working. I thought it is a software issue and performed a HARD Reset and then re-loaded the stock Sprint ROM. Previously also I was using the stock Sprint ROM. But this Hard Reset+Flashing Stock ROM did not help and the problem re-occurred.
After this I took the phone to the local HTC support team here in India as I suspected that it was a probably a connector coming loose somehow. They opened up the phone reconnected the Board to Board connector and it worked for a few hours. But then the same issue showed up again. HTC support group says that there 'could' be a fault with the Board to Board connector and a replacement might help in trouble shooting to figure out if there is issue with the B2B connector or not. Now the additional problem is that HTC Support India only supports phone sold in India . And I'm using at Touch Pro in the US.
It would be next to impossible for me to have the phone sent to the US to HTC support and then somehow get it back here in India. The [HTC Service & Repair FAQ clearly says that they do not sell parts separately.
Now I am in a fix on how to fix up my phone ASAP.
Any Inputs people?
Hello everyone.
First of all, sorry about my English because I'm not a native speaker.
I have a phone model - HTC One X+ Plus PM63100 for AT&T 64GB - with cracked screen.
I found out that my phone has SONY display version ( http://forum.xda-developers.com/showthread.php?t=2164760 )
Wanted to replace digitizer with front panel and order it from here http://www.etradesupply.com/oem-htc...embly-with-front-housing-and-light-guide.html but person who answered my question about compatibility said that it is not compatible with my phone model.
However, there is a one customer review under that replacement part which says that "it turned out to be uncompatible with my HTC One X+ international version. I do not know why this is the case but it is what it is."
In wiki http://en.wikipedia.org/wiki/HTC_One_X it seem international X+ and AT&T version are same size.
I'm very confused and desperate, searching more than 2 months and can't find which replacement part fits my phone.
Please advice what to do or purchase.
Also, are both X+ models - S728e?
Thank you beforehand.
cracked screen
I was in a similar situation some time back, when my Telus unlocked HOX+ 64 Gb dropped and the screen cracked.
I gave it to a local repair guy, he ordered a HOX screen first and then realised that HOX+ has a little different hardware (some screws were in different places). hence, HOX and HOX+ are slightly different builds. Also, the international HOX+ and AT&T/Telus HOX+ are also different I suppose. Firstly the they have red coloured capacitive buttons at the bottom (also there is no red ring around the camera at the back).
The part shown in your link seems to be the same one that I have, so i think it should be compatible.
nrshastri said:
Also, the international HOX+ and AT&T/Telus HOX+ are also different I suppose. Firstly the they have red coloured capacitive buttons at the bottom (also there is no red ring around the camera at the back).
The part shown in your link seems to be the same one that I have, so i think it should be compatible.
Click to expand...
Click to collapse
Thank you for response.
I don't care about button colors, even logo. I just want to purchase match display. Could you please (if it is possible of course) ask your local repair guy what was the model he replaced for your phone? Even link will be very helpful for me.
Thanks againt
I've been using my phone since i quite badly cracked it last month. Touch screen is still working fine and i may not even get the screen fixed.
Only thing i'm worried about is if the device is less waterproof now i have large cracks in it....:/
Sent from my HTC One X+ using Tapatalk
hi thisaint,
i checked with my local guy, but sorry, he doesn't seem to have any clue regarding the model number or the actual source of the panel. most these repair guys here have a trader/distributor from whom they get all kinds of accessories required for repair and they hesitate to give out the details fearing loss of business.!
cracked display
nindo said:
they hesitate to give out the details fearing loss of business.!
Click to expand...
Click to collapse
Dear friend,
thank you for response.
I'll be happy to be in Mumbai or even in USA to repair my phone but unfortunately I live in another country. )
I had a hope to see my phone repaired before this christmas but it seem I'll meet holidays without it
Solved
Hello everyone.
Finally I have found a replacement lcd screen digitizer frame assembly at ebay/com.
Seller assure me that his SHARP screen is interchangeable with my previous SONY screen and I risked and purchased his item for 65 USD.
(insert ebay com) /itm/LCD-Display-Touch-Screen-Digitizer-Frame-Front-Cover-For-HTC-ONE-X-Plus-S728E-/251348208725?pt=LH_DefaultDomain_0&var=&hash=item3a85854c55
I'm using it without any issues, however screen buttons are red , that's all difference with original.
:crying: I have HTC One X+ 64gb Telus which is rooted,s-off and boot loader unlocked. I am using Elegancia 6.2.0. I don't know what happened to it. Suddenly Capacitive buttons are not working as light are working. In past it never dropped and I Nevar sit on it. I don't know why it happened. Now i am using LMT launcher from which I am not satisfied and thinking about repairing it. In my city there are no HTC service center but there is a collection point(I don't know what it is??? ) . I searched about this on Internet and found that it may be problem of Digitizer. So, My questions are:
1. By replacing LCD+Digitizer would solve this problem? If yes, then which variant should I buy SHARP or SONY version? As mine is Telus version.
2. Should I go to Collection Point in my city ?
3. Or should I take risk of doing dis-assembly of it ?
4. Or Should I buy a LCD+Digitizer from internet and do replacement by local mobile repairs?
PS: I bought it 2 months ago from ebay and it doesn't have manufacturer warranty. And sorry for my bad english
Bring it to an authorized repair shop or contact HTC and ship it in. Make sure that it is actually a hardware problem, and then have them replace it.
Try not to replace it yourself, there is a ton of adhesive and you might damage the phone as you need to use a suction device to remove the screen.
(I do believe the buttons are part of the lcd/digitizer assembly, but you might want to check with HTC support)
If you want to save money, https://play.google.com/store/apps/details?id=com.fatedevgroup.softkeyenabler&hl=en will get you on screen buttons
I replaced a smashed screen and damaged LCD on an LG Optimus L90 D415 (T-Mobile) and the digitizer is responding in a mirror-image fashion. That is if I touch an area on the right side of the screen, the touch is registered in the same congruent location on the left and vice versa. This is consistent across the whole area. I turned on the Pointer Location in the Developer's Option and it did show the trace on the opposite side. Could this be a firmware issue rather than a hardware defect or damage?
I'm a phone repair technician, and I am comfortable with the repair I made. There was no damaging mistake in the installation. Visually, the part looked fine. And there was not mistake like a reverse or upside down connection (not possible with the design of this phone).
I don't know the history of the phone but TWRP and a custom ROM had been flashed to it. (Thunder XBlast? I think) . I then flashed Cyanogenmod 11 and then flashed a stock ROM that didn't include stock recovery or bootloader. With all three ROM's the same problem occurred.
The problem didn't seem consistent with a physically damaged or defected digitizer - no ghost touches, dead zones or inconsistent behavior. So because it had been rooted and a custom ROM flashed I thought it may actually be a firmware issue, so I brought it to this forum. Any ideas?
did you happen to solve the problem with the Lg L90 digitizer being mirrored? I'm experiencing the exact same problem with the LG L90 T Mobile version that I replace the digitizer on. I put a white one on as opposed to the black that it originally had from the manufacturer and was purchased on ebay and shipped from Westminster, Ca- I'm leaning towards it being a defective part-please let me of any solutions you came by-thank you so much for your time (phone is stock, not rooted)
Unfortunately, I have not found a solution to my digitizer problem, but your information is quite helpful. I too opted to get the white screen version off eBay from a company in Westminister, CA. It was what was most available and best priced. And the listing claimed it was compatible with D405 and D415. Mine is the T-Mobile version and was factory black. It appears then that it may not be a defect issue but a compatibility issue. And apparently it's not an effect from rooting or flashing a custom ROM since the same thing happened on your device that wasn't rooted. It would be nice if there was a software fix that would render it compatible. Incidentally, I paid around $30 for both the LCD and digitizer. Looking back on eBay just now I noticed the company has bumped the same parts up to almost $90. I'll have to check and see if I can still get an RMA and send it back. Let me know if you have any luck.
Sent from my Nexus 7 using XDA Free mobile app
Having the same issue here, purchased the black ebay version from a seller in MO and installed today. Are the contacts on the small ribbon cable reversible?
Installed on an unrooted tmobile L90 D415, bought the phone about 3 weeks ago before it dropped (my case came in the mail that same day).
Im wondering if there's a "good" version of this digitizer available, wouldn't mind paying a few more bucks on a part that actually works correctly.
Hi Friends,
I am from India. Here I wrote My case about HTC amaze 4g. It is little bit lengthy and i request you all pls help me to my phone working back.
One of my friend bought HTC amaze 4g (T-Mobile) in US and he gave it to me.
I used it in india with indian GSM sims
the phone was excellent when i was using it and working perfectly.
After few months, I root it by seeing some information from online. and i successfully rooted my phone.
After rooting, My phone was working good.
One day my phone was fell down and the touch and screen got broken.
I gave it to a mobile shop they replaced a new screen with touch. After one month the phone slowly got weaken.
First mobile IMEI no lost.
after that touch of the phone is lost
after that all applications one by one are not working.
Now my phone is dead and it is not all ON, booting and opening
But when i checked charging my phone the power is supplied to the phone.
Above is my case. Pls suggest me what i want to do to restore my phone to a normal state.
Thank you guys
broken
Mani_Indian said:
Hi Friends,
Pls suggest me what i want to do to restore my phone to a normal state.
Thank you guys
Click to expand...
Click to collapse
If you can't even see your screen, I think your phone needs a different shop or you need a new phone.
If you can see your screen, try this simple guide:
http://str8pt.blogspot.com/2012/12/restoring-to-stock-firmwarerom-htc.html
If that doesn't do it, you can come back here for help.