Hi everyone. I have problem with my micro sim tray. When I insert my sim card in the tray, it can go in but it doesn't stay "locked", but tray ejects it immediately, instead of "locking" it and holding it. I guess the problem is that I have been using manually cut sim card which was smaller than the original micro sim I now want to insert.
Is there a way to fix this somehow without buying a new part to replace the tray?
Thanks in advance!
the slot is like 5 bucks, so I'd just replace it
I have a nano SIM that I had put in a micro sim holder and have been using. last night I wanted to swap the SIM card and when I pulled the tray out, the NANO SIM card has come out - but the SIM CARD TRAY HOLDER and MICRO SIM HOLDER are struck to something inside and not coming out - I think inner edge of Micro Holder is struck to something. I can push in but cant pull out....
any help how to get it out.
rb69 said:
I have a nano SIM that I had put in a micro sim holder and have been using. last night I wanted to swap the SIM card and when I pulled the tray out, the NANO SIM card has come out - but the SIM CARD TRAY HOLDER and MICRO SIM HOLDER are struck to something inside and not coming out - I think inner edge of Micro Holder is struck to something. I can push in but cant pull out....
any help how to get it out.
Click to expand...
Click to collapse
Don’t force it out. you will break the sim pins connector inside phone. It seems the sim adapter hang up with some of the sim pins in the phone.
try to insert thin piece between the adapter and the phone connector. see if it will free the adapter
HI!
I have a problem with a HTC One Max.
it can not read the Sim Card (GSM)
I opened the Sims Card Reader and it seems that there are some Pins Broken.
Did someone of you know how much Pins have to be connected to the Sim Card (O2 Germany)
and may be a Idea to easily repair it
Have a Look:
greetings
May it be possible with some Solder drops and than Tape the Sim on top of it?
Very easy but cheap method!?
Is it possible to cut down a micro sim to nano sim and will it fit the sim cradle? (nano sim thiiner than micr sim?)
It is possible, but not recomended. Also the nano sim is a bit tinner and this needs some extra work.
You'll risk getting it jammed inside the device and damaging it. It's totally not worth it.
i cutted my micro sim to nano sim
working perfectly
Try that :
https://dl.dropboxusercontent.com/u/3861236/iHackintosh Nano SIM.pdf
Thanks for the advice. I'll finally decide when it arrives!
I've also cut my nano sim with scissors.. worked much better than i expected
Cut 2 sims today used a sim adapter to get the correct place to cut , both work perfectly
Sent from my ONE E1003 using Tapatalk
Yesterday I went to local mobile store and they cut mine from micro to nano free of charge, but I had to agree that the process might ruin the sim card Works like a charm and I saved 5euro for the new sim card from carrier.
borodrb said:
Is it possible to cut down a micro sim to nano sim and will it fit the sim cradle? (nano sim thiiner than micr sim?)
Click to expand...
Click to collapse
I cut down my work sim from micro to nano to fit in the OPX, just used my main sim as a template and kept checking it in the sim tray till it fitted.
So far no problems and comes out and back in again easily
Let it cut with a nano sim cutter in a mobile store, then use a nail file or emery board to make it a bit thinner and round the edges. Worked for me and doesn´t cost a cent. If it goes wrong, you can order a nano sim anyway.
basically i thought to do this, but i can't afford 3 days w/o calls if i ruin my micro sim so ordered my nano sim
the thing i'm reticent is IF i had to go back to old phone, i could not be able to use micro sim
let it cut by local rip-off mobile store for 5€. well at least it works and was less expensive than a new card from the carrier for 15€.
Cutted mine (using scissors), no problem...
Cutted mine with a bought sim cutter,works perfect
Just messed up the SIM slot on my XT1526, thanks to Nano/Micro SIM adapter which I had to use, got lodged in there, yanked it, now the pins are bent in there.
Any chance of opening/replacing the SIM slot (or pushing the pins back in place). Phone was 2 days old.