hi guys.need help . I have bootloop problem with my g610. it only reboot when logo shows and I have to unplug battery.I cant use SP flash tools or other programs cause when I connect it to my pc it connect for a while and disconnect .any ideas to connect my phone to pc . by the way I tryed to connect without bat but same problem happend. (sry for my english)
help
before doing this things I'm backed up phone with mtk droid tools.
help
any suggestion?
Related
I am using a lenovo p770 and today it froze... the screen was on but not responding..... so i pulled out the battery and now it doesnt even power up.... so i tried charging it and usually the indicator light glows red but now it did not... however when i pulled out the battery and continued the charging the red light came on..... and when i put the battery back in it turned off again... the phone is rooted so no warranty..... can neone help me out or at least point me in the direction of what might be wrong..... ???
i rooted the phone long time back.... abt 6 months ago and must have tried several custom roms several times.... all this while the phone was running fine.....
Thank you..
more info on the problem
Pls help...
I tried to use sp flash tools to flash the preloader....... when i connect the phone to the pc the mediatek vcom usb device is detected but as soon as sp flash tools try to write the device disconnects and i get the error that emmc not found.... i tried multiple times... i uninstalled old drivers and installed new drivers but everytime i get the same problem.... if i dont use sp flash tools then the device stays connected a little while longer but eventually disconnects within a minute....
so does the phone stand a chance of being repaired cause it gets detected at least even if its not powering up...??
I'll be trying to do the same on a completely fresh system till then ne ideas of what cld be wrong and wht cld i do to repair it would be nice.....
thank you....
Help-me I have Problem
I have a problem , when I try to Download the recovery.img , the green circle not showing , it is only an error message , under the device manager ... when I connect the phone , the computer recognize it but it is disabled after 2 second , ... and the process fails .
is there any solution for the driver disconnection ?
Hello
I have an Lenovo s898t+ from aliexpress. with androdi 4.4.2 And I was trying to increase my file system root partition in phone. I use apk meteos MTK 6592, and after getting to recovery mode I did everithing like was write in other forumm that I found set factory restart. And now my phone is in something lie bootloop always showing android figure and when I try to turn it off only show
forrmating /data...
mount system/ error
and can`t get to recovery mode or if I try to connect to PC via USB without the batery inside the phone is still rebooting. I know how to flash stock rom, but cant do that becouse the phone is still connecting and disconnecting to PC.
Can somebody help please I have been searching for 4 days with no luck.
Thanks for all you answers
If your phone is a MTK device..
U can flash a new rom..
With SPflash tools..
abhinavp649 said:
If your phone is a MTK device..
U can flash a new rom..
With SPflash tools..
Click to expand...
Click to collapse
Cant get phone to stable connection to PC always reseting without battery and with baterry the bootloop shows up and did not connect to pc
u have to start the download process from SPtools before connecting your phone to PC
hopefully, it will show your phone..
some phones have a trigger to start the download..may be power button or any of volume buttons..
Some phone also required to pop in the battery to start the process..
Try any of these options..
hopefully, u will have ur phone flased with a new rom..
ingshibbby said:
Cant get phone to stable connection to PC always reseting without battery and with baterry the bootloop shows up and did not connect to pc
Click to expand...
Click to collapse
u have to start the download process from SPtools before connecting your phone to PC
hopefully, it will show your phone..
some phones have a trigger to start the download..may be power button or any of volume buttons..
Some phone also required to pop in the battery to start the process..
Try any of these options..
hopefully, u will have ur phone flased with a new rom..
Ayow nigga .
The problem started when my system updates, after I click upgrade I've experience some effin errors . Then my Gionee m3 started to malfunction .
Help me this effin loop is so irritated . I already tried to flash stock rom , SP Flash, and I also download mediatek and some usb drivers . I think my main problem is SP flash tool cant recognize my device it wont charge either . Help me do you have some solution ?
i have the same problem my gionee m3.... i dont know other method to usb debuging my phone because it is only showing of android system recovery 3e when i use adb devices it not recognize it only shown as 0123456789abcdef sideload... in my searching it will change if i usb debugging enable... also sptools work on usb debugging i think
I have the same problem. I have installed two different sp flash tools, installed ADB drivers. my PC detects my phone and charging but having the option to open my files. I tried SP flash tools but wont detect my phone and will just charge.
PLease help.
Hi all,
I have a similar problem of bootloop after installing cm13 and gapps, it keeps rebooting back to twrp recovery. pls help.
hi all developers i trying flash huawei Hol-T00 with spflash and it not complete flashing and the device stop ....
the computer stop detect the device and when i connected the battery it go vibration long time and still not detected from the pc
plz who to get connect any jumper can make the device to detect on the pc ??
plz help thanks for all ..
my lenovo a7000 doesn't turn on, can't go to recovery mode. also my first hardbrick experience. desperate for help.
whenever i use spflashtools to download a fresh stock rom to my phone, it always shows this problem
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)"
I've also tried to format it, but the same problem comes up.
Then I saw this vid. It's about fixing any bricked china phone.
"How to Unbrick every MTK China Phone ! Preloader / SP Flashtool Fix [HD]"
(pls search it on youtube if you like. somehow i couldn't post links.)
I don't know, but I think this vid is trying to fix those phones that aren't recognized by the PC. But mine is recognized. It comes up on the Device Manager as a MTK USB Port (COM10) with the battery on. But it keeps on getting disconnected and reconnected again. But this stops when I remove the battery, put the battery back on, click on download on the spflashtools, then connect the USB. The error will appear, but somehow the connection becomes stable.
Also this video talks about META mode. With the battery out, I tried all of the key combinations to enter this mode, without success whatsoever. If you know something, pls. share.
Maervince015 said:
my lenovo a7000 doesn't turn on, can't go to recovery mode. also my first hardbrick experience. desperate for help.
whenever i use spflashtools to download a fresh stock rom to my phone, it always shows this problem
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)"
I've also tried to format it, but the same problem comes up.
Then I saw this vid. It's about fixing any bricked china phone.
"How to Unbrick every MTK China Phone ! Preloader / SP Flashtool Fix [HD]"
(pls search it on youtube if you like. somehow i couldn't post links.)
I don't know, but I think this vid is trying to fix those phones that aren't recognized by the PC. But mine is recognized. It comes up on the Device Manager as a MTK USB Port (COM10) with the battery on. But it keeps on getting disconnected and reconnected again. But this stops when I remove the battery, put the battery back on, click on download on the spflashtools, then connect the USB. The error will appear, but somehow the connection becomes stable.
Also this video talks about META mode. With the battery out, I tried all of the key combinations to enter this mode, without success whatsoever. If you know something, pls. share.
Click to expand...
Click to collapse
Hi!
I had the same issue 2 day before!
To fix it I was unable with windows,so I downloaded a spflashtool for linux. I started with sudo (root access) and made the same method with the windows version.Its worked for me! But wait one or two day,maybe somebody will know a solution with windows.
My Lenovo A7000 Does not turn on
While installing the official update marshmallow device switched of and then it does not turn on. If i put in charge then after sometime lenovo screen appears and the it shuts down again,. Cannot go to recovery mode also. The lenovo screen shows TOOL Dl image fail in the left bottom side.
How can i solve this problem Please someone help me:crying::crying::crying: