I need to replace my inn screen cover. Not the entire LCD but just the plastic cover that is glued right over the LCD. I have been searching for 2 days on google, ebay, you name it! Can anyone help?
Hi all, so I'm in the middle of replacing the digitizer for my TB. Got the new digitizer hooked in - there is supposed to be adhesive included, but I'm not sure what form it has taken. I have a clear piece of plaster with 2 printed tabs that say "Please peel off this mask before application" and "Please peel off this mark after application". I also have a white sticker looking thing, when I peel the paper back a see a clear piece of plastic inside. The only adhesive I've seen before goes around the sides - is the thunderbolt a clear platic adhesive that covers the whole surface? I'm assuming maybe one of these is a free screen protector they might have included? Pic of both attached
Edit: white sticker-looking one is a bit thinner than the width of the screen, am I supposed to cut this into strips to go around the outside?
Now that I go back and look - the listing I bought from didn't actually mention any adhesive, so I'm not 100% either of these necessarily are the adhesive.
rledge21 said:
Hi all, so I'm in the middle of replacing the digitizer for my TB. Got the new digitizer hooked in - there is supposed to be adhesive included, but I'm not sure what form it has taken. I have a clear piece of plaster with 2 printed tabs that say "Please peel off this mask before application" and "Please peel off this mark after application". I also have a white sticker looking thing, when I peel the paper back a see a clear piece of plastic inside. The only adhesive I've seen before goes around the sides - is the thunderbolt a clear platic adhesive that covers the whole surface? I'm assuming maybe one of these is a free screen protector they might have included? Pic of both attached
Edit: white sticker-looking one is a bit thinner than the width of the screen, am I supposed to cut this into strips to go around the outside?
Now that I go back and look - the listing I bought from didn't actually mention any adhesive, so I'm not 100% either of these necessarily are the adhesive.
Click to expand...
Click to collapse
It looks identical to the screen protectors from verizon, peel #1 off, apply to screen, peel #2 off, squeeze air bubbles out
Sent from my DROID BIONIC using XDA App
rledge21 said:
Hi all, so I'm in the middle of replacing the digitizer for my TB. Got the new digitizer hooked in - there is supposed to be adhesive included, but I'm not sure what form it has taken. I have a clear piece of plaster with 2 printed tabs that say "Please peel off this mask before application" and "Please peel off this mark after application". I also have a white sticker looking thing, when I peel the paper back a see a clear piece of plastic inside. The only adhesive I've seen before goes around the sides - is the thunderbolt a clear platic adhesive that covers the whole surface? I'm assuming maybe one of these is a free screen protector they might have included? Pic of both attached
Edit: white sticker-looking one is a bit thinner than the width of the screen, am I supposed to cut this into strips to go around the outside?
Now that I go back and look - the listing I bought from didn't actually mention any adhesive, so I'm not 100% either of these necessarily are the adhesive.
Click to expand...
Click to collapse
use an exacto knife and cut thin strips odd the white adhesive. Be careful not to cover sensors or have it too wife so that you can see it on the screen. Make sure you put enough along the bottom or you'll have the soft key lights bleed on the screen something fierce. Good luck!
Swyped Thunder coming at you
um.... Not sure what these other guys are talking about, but the guy I know that does these uses a 2mm tape made specifically for this task produced by 3M. If someone sent you a sheet of crap you gotta cut up to make work, you got hosed in my opinion. I believe in doing a job right, and THAT doesn't strike me as how they do it at HTC. I believe Amazon has the correct 3M tape for this job.
loonatik78 said:
um.... Not sure what these other guys are talking about, but the guy I know that does these uses a 2mm tape made specifically for this task produced by 3M. If someone sent you a sheet of crap you gotta cut up to make work, you got hosed in my opinion. I believe in doing a job right, and THAT doesn't strike me as how they do it at HTC. I believe Amazon has the correct 3M tape for this job.
Click to expand...
Click to collapse
Can you give me a link. It is greatly appreciated.
Here ya go.
They also have 3mm and 1mm, but 2mm is recommended. Just put it on the outer edge of the digitizer, don't let it overlap the black bezel. I highly recommend layering 2 strips on each side or you will not have enough space between the glass and LCD and eventually they will touch which will make it look like there is water inside it.
I purchased a brand new TMO marble white version online, came in a sealed box, after opening the box and removing all the protective plastic junk I noticed some very weird discoloration on the silver frame, I don't know how to describe them they are patches of gray spots on the brushed silver frame, mostly on the top and some right above the charging port area, if you have them you'll know what I'm talking about, anybody noticed this.
if its brand new just get it replaced through warranty?
I cracked my rear glass and purchased the replacement 'JerryRigEverything' recommended on his how-to replacement video on youtube. Not only did it arrive with a crack, but it has adhesive covering the entire back side and not just the edges. I bought another one on ebay which I just received today and same thing, adhesive covering the entire back (minus the lens and sensors of course), even though the seller assured me the adhesive was only on the edges.
So does anyone have a good source for replacement rear glass that has adhesive only around the edges like the original one?
Bonafide HardwareTM - Back rear replacement camera glass lens Google Pixel (Black) https://www.amazon.com/dp/B074PDBNMJ/ref=cm_sw_r_cp_apa_fMHAAbMD56SEJ
You can try this one. I think it might have what your looking for. I would just get some double sided tape. I found it works better for me.
I am searching eBay and aliexpress to try and find a V30 lcd screen replacement for my phone. I am taking my time because although the screen flickers bright white wildly when I switch on and off and occasionally it does not turn on, requiring me to put my hand over the sensor several times before the screen returns, it works ok.
The problem is all I can find are screens that are silver bezel with silver frame or black bezel with black sides and frame.
My phone is silver back and sides with black front and bezel which led me to believe that the screen may have been replaced prior to me purchasing it but looking on the net there does appear to be a silver version with silver sides and a black front bezel. Anyone know where I might find one, I don't want to have silver backed phone with black sides and black bezel it just wouldn't look right.
LG V30 Screen with silver black frame
The silver LG V30 should be black screen with silver frame. I don't know why eBay sells different type, maybe there's other versions. You can check witrigs, they should have what you need.