Fried my laptops HDD, but is there anyway to run a ruu without a computer. I keep seeing info from other uses about running a ruu that'll fix the black screen issues with epilson kernel
http://forum.xda-developers.com/showthread.php?t=2860486
Sent from my HTC One_M8 using Tapatalk
The only question I have about that is I've realized its based from 2.23 fw...I'm guessing if I wanted 3.xx.xxx again. I'd have to update again.
That method flashes stock recovery. I don't have any means of flashing a custom recovery after I've flashed that RUU
AT&T hasn't released 3.x software, so therefore no corresponding RUU yet.
Sent from my HTC One_M8 using XDA Free mobile app
Well that sucks. I was hoping to flash xboxs latest kernel
@jxcorex28
If your S-off and Supercid than you can flash the 3.28.401.6 from link below .my device is the AT&T variant and the above 3.28.401.6 works great on mine and would allow you to use the updated kernel you wish to run
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://forum.xda-developers.com/htc-one-m8/development/firmware-flashing-panic-attacks-t2824048
To upgrade my fw to the latest, I just ran the developer edition ruu 3.28.1540.5. Since it has the same bands as AT&T, my lte speeds weren't affected at all. In fact, in places way out of my city where I used to get spotty coverage going in and out, I now get consistent connection with a decent speed. I'm very happy I did mine this way.
Since you don't have a computer, maybe you can see if someone can make a bootable ruu from the exe posted in the forums
Who started that thread you pulled the RUU from ? Honestly I was thinking about doing GPE conversion. I rarely use sense anyways
I'm on 3.28.401.7 right now, have been for about 3 or 4 weeks
jxcorex28 said:
Who started that thread you pulled the RUU from ? Honestly I was thinking about doing GPE conversion. I rarely use sense anyways
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2884777
This Is the one I believe. Someone had made another post for the 3.xx ruu , bc the original one (at that time) was a few pages in. They one I downloaded was an exe file tho, the page has since been updated with zips ( not sure if they're just zipped exe files or bootable ruus, didn't really look)
In any case, it was the best decision I ever made for my AT&T m8. It was pretty cool to see it without all the AT&T bloatware and boot animations too, tho that changed pretty quick when I wiped it and flashed roms again
I've never used a RUU before, but I am on 3.28.401.7...just had to rename to 0P9BIMG and hboot flash....I've been looking for a way to convert to GPE. I never use sense roms
Related
Before downloading the AIO toolkit I was already unlocked, so i skipped the first 6 steps. everything seemed fine, I was already using Amon Ra 3.14. With the toolkit I did a few things, flash the different recoveries just to see how they looked and worked, ended up back to amon Ra, then I used the debloater and all of the sudden I noticed I wasn't getting any service. I'm hoping this is a verizon thing but I haven't found anything about any outages. since then I've been trying different stuff from flashing kernals, to restoring my nanbackup. so far no luck. Has anyone else been experiencing any issues like this?
something I did notice on verizon website when i went to go into there support forums they were down for maintance. not sure how or why this would affect phone service tho.
Dyrt Mcgyrt said:
Before downloading the AIO toolkit I was already unlocked, so i skipped the first 6 steps. everything seemed fine, I was already using Amon Ra 3.14. With the toolkit I did a few things, flash the different recoveries just to see how they looked and worked, ended up back to amon Ra, then I used the debloater and all of the sudden I noticed I wasn't getting any service. I'm hoping this is a verizon thing but I haven't found anything about any outages. since then I've been trying different stuff from flashing kernals, to restoring my nanbackup. so far no luck. Has anyone else been experiencing any issues like this?
something I did notice on verizon website when i went to go into there support forums they were down for maintance. not sure how or why this would affect phone service tho.
Click to expand...
Click to collapse
If you're not getting ANY service at all (even regular cell service) I would be worried.
Getting no cell service.... every now and then I will get 1 bar but it never shows a 1x or 3g or 4g. and it wont make a call. Right now I'm trying to do RUU back to stock to see if that fixes it.
Dyrt Mcgyrt said:
Getting no cell service.... every now and then I will get 1 bar but it never shows a 1x or 3g or 4g. and it wont make a call. Right now I'm trying to do RUU back to stock to see if that fixes it.
Click to expand...
Click to collapse
Make sure you re-lock before you do. Just mentionin. This could be the best thing you could is to RUU back.
Problem fixed, I feel like an idiot. I have my back cover off, not knowing it was the antenna.
Dyrt Mcgyrt said:
Problem fixed, I feel like an idiot. I have my back cover off, not knowing it was the antenna.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It happens.
Hi!
I have a htc amaze 4g from videotron and I di'dn receive the update so I download the official OTA and now I want to know if I can install it on my phone bought on videotron and how?
Thanks in advence!
jerod212 said:
Hi!
I have a htc amaze 4g from videotron and I di'dn receive the update so I download the official OTA and now I want to know if I can install it on my phone bought on videotron and how?
Thanks in advence!
Click to expand...
Click to collapse
See this button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
on the top right of the forum? Use it.
Keylogger_0 said:
See this button
on the top right of the forum? Use it.
Click to expand...
Click to collapse
All the topic found is not for the htc amaze, my question also is not answer, can I install it manually from a phone brought on videotron, with a videotron rom.
jerod212 said:
All the topic found is not for the htc amaze, my question also is not answer, can I install it manually from a phone brought on videotron, with a videotron rom.
Click to expand...
Click to collapse
Answer #1 = search forum for the AMAZE, and also see the Bible, everything you need is in there.
Answer #2 = yes, you can
the ota you got from dslreports are the first version of ics (july 1st). I bet videotron will improve this one. Will see.
Videotron OTA rom
Seems that at the end of august , the ROM didn't change really , i have downloaded hanson2000's copy of the rom on dev. I tried searching the forums, but I was wondering why it would not find the update zip file on my sd card and use it. Do I need to have at least the bootloader unlocked of I need to go through the process of "s-off"ing it as well??
Flynch3211 said:
Seems that at the end of august , the ROM didn't change really , i have downloaded hanson2000's copy of the rom on dev. I tried searching the forums, but I was wondering why it would not find the update zip file on my sd card and use it. Do I need to have at least the bootloader unlocked of I need to go through the process of "s-off"ing it as well??
Click to expand...
Click to collapse
You don't need to use an update zip file, that won't work since the radio has to be updated along with the hboot, the answer to this question is in the bible thread, I'm pretty sure I linked it in my changelog.
Ok so I'm not sure how my phone reverted back from the 1.22 ota back to 1.13, however that's not the issue. I have inserted a screenshot of my build number and baseband version. It shows that I am currently running 1.13, but when I go to run Lazy Panda, it still says "can not find the panda". What would be the cause of this? If it matters, I am running on MeanRom as well. Any help at all would be greatly appreciated!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks like your running a Rom based off of 1.13. If you updated your firmware via HTC then the panda will not be able to find some bamboo. The only way to get s-off is rooted running stock, on previous hboot version.
sent from my EVO LTE with it's security flags down.
1.22 firmware is not the same thing as 1.22 ROM. Once you apply the OTA, and the 1.22 firmware updates, you can't go back unless you are S-OFF. This is why it's never advisable to take an OTA (I'm aware you didn't say you took the OTA, not trying to claim you did) because it is often irreversible. For people who didn't have a choice, this is just unfortunate.
The ROM you're using is based on 1.13, but LazyPanda requires that your firmware also be 1.13, and that's not something you can check from within the ROM, if I recall correctly.
LiquidSolstice said:
1.22 firmware is not the same thing as 1.22 ROM. Once you apply the OTA, and the 1.22 firmware updates, you can't go back unless you are S-OFF. This is why it's never advisable to take an OTA (I'm aware you didn't say you took the OTA, not trying to claim you did) because it is often irreversible. For people who didn't have a choice, this is just unfortunate.
The ROM you're using is based on 1.13, but LazyPanda requires that your firmware also be 1.13, and that's not something you can check from within the ROM, if I recall correctly.
Click to expand...
Click to collapse
Understood completely. It seems as though it shows 1.13 but still has hboot at 1.15. I have been debating on whether or not to visit a friend of mine who works at sprint and see if I can come up with an excuse to have it swapped out, just don't know if they have the white LTE.
I need to return my EVO LTE to get another replacement, but I need the base ROM so I can flash it back to stock. Unfortunately, I can't gain access to the NANDROID backup I made of the base ROM before flashing the Viper ROM that I'm currently using. If someone would kindly post the base ROM that's compatible for my phone's build, I would be highly appreciative. Here's my phone's info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Viperboy made a RUU tool that you can find at the link below.
http://forum.xda-developers.com/showthread.php?t=2197909
If you are S-Off, you can use the viper RUU tool to go back to completely stock.
Sent from my EVO using xda app-developers app
Or, as another solution, you can always flash the stock rooted rom, and remove superuser, thereby unrooting it.
http://forum.xda-developers.com/showthread.php?t=2045935
Just be sure to relock the bootloader. But your best option would be to go S-Off, run VipeRUU, and use a mod to change the bootloader information that's displayed when you boot into the bootloader.
______________________________
HTC Evo 4G LTE
aarsyl said:
Or, as another solution, you can always flash the stock rooted rom, and remove superuser, thereby unrooting it.
http://forum.xda-developers.com/showthread.php?t=2045935
Just be sure to relock the bootloader. But your best option would be to go S-Off, run VipeRUU, and use a mod to change the bootloader information that's displayed when you boot into the bootloader.
______________________________
HTC Evo 4G LTE
Click to expand...
Click to collapse
VipeRUU will put the phone back completely stock, locked bootloader and all. No need to use a mod like regaw's bootloader customizer to change the bootloader info.
Sent from my EVO using XDA Premium 4 mobile app
Thanks, guys. My phone is still S-on. I'm really not concerned with relocking the bootloader since NO ONE ever checks for that stuff based on past experiences.
carlos64030 said:
Thanks, guys. My phone is still S-on. I'm really not concerned with relocking the bootloader since NO ONE ever checks for that stuff based on past experiences.
Click to expand...
Click to collapse
Well, as I suggested earlier, flash the stock rooted rom and remove SU permissions via the SU app.
this phone has been more of a pain in the ass than any other phone ive ever moded.
ive now some how bricked it, and the ruu didn't work had an error, i cna still fastboot but i can't find an img. file of stock can somebody help me find an image of stock please.
http://forum.xda-developers.com/showthread.php?t=2235248
Lloir said:
http://forum.xda-developers.com/showthread.php?t=2235248
Click to expand...
Click to collapse
Ruus aren't working I need an img file just gonna fastboot it
eviling said:
Ruus aren't working I need an img file just gonna fastboot it
Click to expand...
Click to collapse
you can't fastboot system images on this device....it's also impossible to brick. I'll see if i can find my 4.2.2 RUU that i had, doubt it though.
Lloir said:
you can't fastboot system images on this device....it's also impossible to brick. I'll see if i can find my 4.2.2 RUU that i had, doubt it though.
Click to expand...
Click to collapse
It won't work it keeps starting than failing shortly into it.
eviling said:
Ruus aren't working I need an img file just gonna fastboot it
Click to expand...
Click to collapse
you sir are super duper lucky, this is the "pre" 4.2.2 RUU but it run's exactly the same way as the released version
RE-LOCK the bootloader
download and flash in the following way
HBOOT needs running and flashing first : http://www.mediafire.com/download/jbt8k6ddffafakv/(Hboot)_RUU_EVITARE_UL_J.exe
THEN flash this RUU : http://www.mediafire.com/download/kdmjehdji8onild/RUU_EVITARE_UL_JB_50_S_C.exe
enjoy, re-unlock the bootloader after
FYI you WILL LOSE everything on /data/media (internal sd)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What's hboot and how do I relock it I thought only a ruu install did that
eviling said:
What's hboot and how do I relock it I thought only a ruu install did that
Click to expand...
Click to collapse
alright i learned now i needed to fast boot flash a boot.img im trying that, i flashed that so far, trying to sideload the other file. damn things drivers always crashing and causing me problems. does anybody else have this many problems with these drivers?
Edit. Finily got it booted with a ROM. Got viper without sense its pretty nice a and much lighter without sense probably so I think its a fair compromise for not having a cm based ROM for at&t version. Gf not as happy with it but at least now I won't have to hear her ***** as much about a glichy phone. I hope