hello everyone ! my nephew brought me an htc one max bricked.... stuck on htc logo,not charging perhaps(red light for 30 sec) ,hboot working till i select something and then freezing... not connected with my laptop and i have tried method with 0P3IMG.ZIP (not sure correct zip)....nothing yet.....
any chance to revive this device ? (i had before htc one max and i can manage it)
thank you in advance
frantech said:
hello everyone ! my nephew brought me an htc one max bricked.... stuck on htc logo,not charging perhaps(red light for 30 sec) ,hboot working till i select something and then freezing... not connected with my laptop and i have tried method with 0P3IMG.ZIP (not sure correct zip)....nothing yet.....
any chance to revive this device ? (i had before htc one max and i can manage it)
thank you in advance
Click to expand...
Click to collapse
Yes. Go to HTC dev. Setup an account and boot loader unlock it. Then flash a custom recovery and the Rom of your choosing.
dottat said:
Yes. Go to HTC dev. Setup an account and boot loader unlock it. Then flash a custom recovery and the Rom of your choosing.
Click to expand...
Click to collapse
thanks but i cant communicate with adb says waiting for device in hboot....hboot opening but not working ,after pressing any command is freezing... qhsusb_dload it was missing,i have replace with other driver..
frantech said:
thanks but i cant communicate with adb says waiting for device in hboot....hboot opening but not working ,after pressing any command is freezing... qhsusb_dload it was missing,i have replace with other driver..
Click to expand...
Click to collapse
You don't use adb there. You use fastboot. Trust me it will work.
dottat said:
You don't use adb there. You use fastboot. Trust me it will work.
Click to expand...
Click to collapse
i use minimal adb and fastboot and it says waiting for device....
frantech said:
i use minimal adb and fastboot and it says waiting for device....
Click to expand...
Click to collapse
You want to setup team viewer so I can show you how to get started?
dottat said:
you want to setup team viewer so i can show you how to get started?
Click to expand...
Click to collapse
ok
little help
frantech said:
ok
Click to expand...
Click to collapse
this firmware.zip is good...working till i have to press vol up for yes (install) or vol down
for no (cancel) but nothing i can select..volume buttons not working,but in normal hboot whitout install 0P3PIMG.zip buttons working (but freezing after select any option)
strange is ,if i select first time vol down for no,is working,canceling install,if i press vol up for yes first time nothing and also for vol down ...
any ideas? jtag last chance?
frantech said:
this firmware.zip is good...working till i have to press vol up for yes (install) or vol down
for no (cancel) but nothing i can select..volume buttons not working,but in normal hboot whitout install 0P3PIMG.zip buttons working (but freezing after select any option)
strange is ,if i select first time vol down for no,is working,canceling install,if i press vol up for yes first time nothing and also for vol down ...
any ideas? jtag last chance?
Click to expand...
Click to collapse
this firmware won't work for you because it's lower than the main version installed on your device and your device is s-on
so first try to install the firmware in the link below by the same method to confirm that every thing is workin then proceed to unlocking your device and flash recovery
https://drive.google.com/file/d/0B1kAXZSHj6XyUng1T21seDZlbE0/view?usp=sharing
download it the rename it the same as you do above and put it in your sd card and don't forget to remove the previous firmware first
mido.fayad said:
this firmware won't work for you because it's lower than the main version installed on your device and your device is s-on
so first try to install the firmware in the link below by the same method to confirm that every thing is workin then proceed to unlocking your device and flash recovery
https://drive.google.com/file/d/0B1kAXZSHj6XyUng1T21seDZlbE0/view?usp=sharing
download it the rename it the same as you do above and put it in your sd card and don't forget to remove the previous firmware first
Click to expand...
Click to collapse
it says Main version is older! update fail....
frantech said:
it says Main version is older! update fail....
Click to expand...
Click to collapse
What about this one we got?
https://docs.google.com/file/d/0BxI0ftE577d4QVg2MWo2RVpMMW8/edit?usp=docslist_api
???
dottat said:
What about this one we got?
https://docs.google.com/file/d/0BxI0ftE577d4QVg2MWo2RVpMMW8/edit?usp=docslist_api
Click to expand...
Click to collapse
this one from our member AOWS is what i need...but i thing my hboot is corrupt . i cannot select vol up for installing....like in hboot menu where after select an option is freezing... isn't possible to fix first hboot and then i can do anything?
frantech said:
this one from our member AOWS is what i need...but i thing my hboot is corrupt . i cannot select vol up for installing....like in hboot menu where after select an option is freezing... isn't possible to fix first hboot and then i can do anything?
Click to expand...
Click to collapse
When you boot it up does it at least read the file and ask to update?
dottat said:
When you boot it up does it at least read the file and ask to update?
Click to expand...
Click to collapse
yes..is checking and then ask me install or not as in attachment
frantech said:
yes..is checking and then ask me install or not as in attachment
Click to expand...
Click to collapse
Volume up does nothing?
dottat said:
Volume up does nothing?
Click to expand...
Click to collapse
if i select first time no (down) is working (canceling) ,vol up doesn't working (after pressing vol up i thing is freezing)....in hboot menu both working
frantech said:
if i select first time no (down) is working (canceling) ,vol up doesn't working (after pressing vol up i thing is freezing)....in hboot menu both working
Click to expand...
Click to collapse
Press up and leave it go just in case it eventually starts.
Wow. Same deal on my m7... Just froze in hboot. And it won't boot. I'm pissed. :'(
CurbThePain said:
Wow. Same deal on my m7... Just froze in hboot. And it won't boot. I'm pissed. :'(
Click to expand...
Click to collapse
Freezes? Are you able to enter the fastboot usb side of hboot?
Nope it freezes if I select recovery fastboot or any of the options. It's a bad eMMC chip or chip solder.
Related
please help my legend is super stuck ...........
The phone will not power into a O/S
Pressing power boots into Fastboot - No volume keys working
Pressing power + Vol Down boots into HBoot - No volume keys working
Pressing power + Vol Up boots into fastboot - No volume keys working
----
All LEGEIMG.zip's Fail - Main Version is older / or / Parsing SD ZIP , nothing happens
Fastboot commands
Devices - ok
other commands - erasing 'userdata' .... FAILED (remote: not allowed)
flash update.zip - unknown partition - cannot determine image filename
flash cwm-recovery-3024.img - unknown partition - cannot determine image filename
ADB Commands
Devices - no devices found - nothing
I would appriate any help - sorry if i started a thread i just need to get this fixed, also if anyone in th uk can fix this problem im back there in june so can send the device to you for fixing
thanks
wow thanks for helping a brother out !
I guess ill throw this unit in the garbage
Patience
What were you doing with the phone when this happened?
^^ +1 here, it looks like there are no system partition in it... how did you get there?
Dr.Romca said:
^^ +1 here, it looks like there are no system partition in it... how did you get there?
Click to expand...
Click to collapse
Thanks for the replys guys....
i brought it from a ebay seller he said he couldnt get past the 3 android screen but sometimes he could get to the recovery screen...
I have no idea what he did and cant contact him, so im trying to fix it
Im guessing yeah no system files or something, but im stumped as to why the volume keys dont function in the hboot and fastboot menus, but do function when starting/booting to the hboot menu
Is it S-OFF? If so, you could flash recovery and try getting there... there are other things but all of those would actually work only for S-OFF...
other thing to try is flashing an RUU...or flashing the zip comming from it by renaming it to LEGEIMG.zip....but you've said all legeimg's fail....
Dr.Romca said:
Is it S-OFF? If so, you could flash recovery and try getting there... there are other things but all of those would actually work only for S-OFF...
other thing to try is flashing an RUU...or flashing the zip comming from it by renaming it to LEGEIMG.zip....but you've said all legeimg's fail....
Click to expand...
Click to collapse
yeah ive tried renaming various RUU's that people said have worked but no joy
Its not s-off unfortunity
Hmmm, you cant go into fastboot?
Sent from my HTC Legend using XDA App
Yeah I can get into fastboot fine and hboot fine
If you cant go into recovery mode your only option will be flashing a RUU 1.3 in fastboot, and.root again.
Or can you go in to recovery?
Sent from my HTC Legend using XDA App
You say you can't get into recovery, but do you mean that when you go into recovery you get the red "!" screen? If so, have you tried using clockworkmod?
1) Download clockworkmod from http://forum.xda-developers.com/showthread.php?t=969076] and put it on your SD card, not it any folders
2) Put a ROM in your SD card (try a rooted ROM first, B 0.8 for example)
3) Go into recovery mode (Vol down+power, select recovery) and you should see the red "!" screen
4) Vol up + power, wait 5-10 secs, then a blue menu will appear. Select "apply update.zip"
5) Another menu will appear there. Clear everything (I think it says factory reset or something), then install ROM from SD card
6) Select the ROM you put on the SD card and let it install
Good luck!
EDIT: Oops, I notice you say that you can't do this in your first post!
,no I can't get into recovery ...
Could you tell me how to flash a RUU in fastboot, that would make my day if I can get it working
Sent from my Nexus One using XDA App
Yes only start the .exe file on your pc, while you connected your Legend with a USB cable and started fastboot.
I would recommend a 1.31 if you want to root your legend again, or a 3.30. RUU if you want the latest official Froyo.
Sent from my HTC Legend using XDA App
Thanks guys just giving it 30mins on charge cas the RUU said not enough power, opppps hehe ill report back !! Thanks again for the help very appreciated
Please, i hope it works^^ do you have a goldcard in your phone?
Edit: which RUU are you.going to flash now?
Sent from my HTC Legend using XDA App
I can put a goldcard in I have one for the legend ... I'm going for the 1.31.405.5 radio 47.26.35.04_7.05.35.26L release 126592 signed
Ok, put the goldcard in, or the ruu will output a cid error. Ok, and after you are going to root your phone again?
Sent from my HTC Legend using XDA App
Oh bugger it was working ... sending ... then got this error
131 Customer ID Error
zerodi said:
I can put a goldcard in I have one for the legend ... I'm going for the 1.31.405.5 radio 47.26.35.04_7.05.35.26L release 126592 signed
Click to expand...
Click to collapse
How could a RUU be signed? Its a .exe file, and don not need do be signed.
Pls report back if the RUU flash works^^
Sent from my HTC Legend using XDA App
zerodi said:
Oh bugger it was working ... sending ... then got this error
131 Customer ID Error
Click to expand...
Click to collapse
Make sure you have a goldcard in. And if it still not works flash the RUU 3.15 or 3.30.
Sent from my HTC Legend using XDA App
ok so ive been trying to update mean rom and then when i got to got recovery all i get is CWM mod how can i get twrp back so i can update mean rom is a thread on how to or no?
slagle96 said:
ok so ive been trying to update mean rom and then when i got to got recovery all i get is CWM mod how can i get twrp back so i can update mean rom is a thread on how to or no?
Click to expand...
Click to collapse
Download goo manager from the play store. Open the app and choose install/flash open script recovery. This will get you twrp back. The bigger issue is how did you get cwm on your phone in the first place?
njfoses said:
Download goo manager from the play store. Open the app and choose install/flash open script recovery. This will get you twrp back. The bigger issue is how did you get cwm on your phone in the first place?
Click to expand...
Click to collapse
i really dont know i jsut tryied to upadte thne it iwaas on there and i was flipping out .....
hey can you help i have goo manager open then what do i do ?
slagle96 said:
hey can you help i have goo manager open then what do i do ?
Click to expand...
Click to collapse
I believe you press settings or menu and then look for install open recovery script and click that. That should get twrp back installed.
njfoses said:
I believe you press settings or menu and then look for install open recovery script and click that. That should get twrp back installed.
Click to expand...
Click to collapse
ok i just got it updated and now my phone waont load the boot screen ahh problems after problems what should i do ?>
slagle96 said:
ok i just got it updated and now my phone waont load the boot screen ahh problems after problems what should i do ?>
Click to expand...
Click to collapse
What happens when you press and hold power and vol down with the device turned off?
njfoses said:
What happens when you press and hold power and vol down with the device turned off?
Click to expand...
Click to collapse
comes with HTC then black screen all the way threw boot up whas there a recent jewel update or something ?
njfoses said:
What happens when you press and hold power and vol down with the device turned off?
Click to expand...
Click to collapse
yeah it does what should i do ?
Im sorry put your posts need to be a little bit clearer and more detailed for me to help. With the phone powered off, press and hold power and vol down. Does the phone boot into recovery when you do that?
njfoses said:
Im sorry put your posts need to be a little bit clearer and more detailed for me to help. With the phone powered off, press and hold power and vol down. Does the phone boot into recovery when you do that?
Click to expand...
Click to collapse
yeah it will turn off in ciople seconds then i have to re hold down power and down to got into recovery but it wont show the screen when i update mean rom at all is thier something else i have to flash likea kernerl or jewel ota update what ?
slagle96 said:
yeah it will turn off in ciople seconds then i have to re hold down power and down to got into recovery but it wont show the screen when i update mean rom at all is thier something else i have to flash likea kernerl or jewel ota update what ?
Click to expand...
Click to collapse
What hboot version are you on?
njfoses said:
What hboot version are you on?
Click to expand...
Click to collapse
1.15 i saw people saying there on hboot 1.19 is this right or no ?
slagle96 said:
1.15 i saw people saying there on hboot 1.19 is this right or no ?
Click to expand...
Click to collapse
Ok, any hboot from 1.15 and up cannot flash kernel's. That is why you cannot flash the latest meanrom because it contains a new kernel for the new base. Follow this post. http://forum.xda-developers.com/showpost.php?p=31014758&postcount=4
njfoses said:
Ok, any hboot from 1.15 and up cannot flash kernel's. That is why you cannot flash the latest meanrom because it contains a new kernel for the new base. Follow this post. http://forum.xda-developers.com/showpost.php?p=31014758&postcount=4
Click to expand...
Click to collapse
sp once i get this will i be able to run CM10 s-on or will hav e to be s-off ?
slagle96 said:
sp once i get this will i be able to run CM10 s-on or will hav e to be s-off ?
Click to expand...
Click to collapse
You can flash any rom following that process.
njfoses said:
You can flash any rom following that process.
Click to expand...
Click to collapse
so once i do this i can run roms that require s-off or no ?
slagle96 said:
so once i do this i can run roms that require s-off or no ?
Click to expand...
Click to collapse
No rom requires s-off.
Sent from my released from customs Evo Lte!
njfoses said:
No rom requires s-off.
Sent from my released from customs Evo Lte!
Click to expand...
Click to collapse
ohh didnt know that man but still thanks for the help really big help
slagle96 said:
ohh didnt know that man but still thanks for the help really big help
Click to expand...
Click to collapse
No problem.
Sent from my released from customs Evo Lte!
I was rooting my uncle's Evo 4g lte because I had rooted my S3 recently and was feeling like everything, I manged to root the evo but I forgot to Wipe everything before flashing Cyanogenmod 10 and now when it load it shows the Cyanongenmod start up in a loop. I've looked through the forum for many different solution and nothing has seem to work can someone one please help me? If anything can someone help me get back to stock Android frimware/
If the phone is s-on you have to fastboot flash the kernel/boot.img first
bigdaddy619 said:
If the phone is s-on you have to fastboot flash the kernel/boot.img first
Click to expand...
Click to collapse
how do i know if it is s-on?
boot into bootloader power phone off completly
let it sit a bit to make sure its off
then press power+vol down
release power after 1-2 secs while still holding vol down
towards the top it will say s-on or s-off
bigdaddy619 said:
boot into bootloader power phone off completly
let it sit a bit to make sure its off
then press power+vol down
release power after 1-2 secs while still holding vol down
towards the top it will say s-on or s-off
Click to expand...
Click to collapse
Ok I see it so what exactly do I flash? because I rooted using the cmd but I put on Cyanogenmod from the recovery
YoungRose said:
Ok I see it so what exactly do I flash? because I rooted using the cmd but I put on Cyanogenmod from the recovery
Click to expand...
Click to collapse
Read this guide and it will tell you how to fasboot flash the boot.img
http://forum.xda-developers.com/showthread.php?t=2256478
On another note if his phone is on the latest OTA 3.16.651.3 you can't run any CM,AOSP,AOKP roms because HTC updated the touch panel drivers and the screen won't work on those roms the way to tell is if his baseband ends with 1210 you can find it by going to settings/about/software info/more
bigdaddy619 said:
Read this guide and it will tell you how to fasboot flash the boot.img
http://forum.xda-developers.com/showthread.php?t=2256478
On another note if his phone is on the latest OTA 3.16.651.3 you can't run any CM,AOSP,AOKP roms because HTC updated the touch panel drivers and the screen won't work on those roms the way to tell is if his baseband ends with 1210 you can find it by going to settings/about/software info/more
Click to expand...
Click to collapse
I can't get into the actual phone only the bootloader if that is the case is there anyway to go back to stock, that isn't a hassle to do?
YoungRose said:
I can't get into the actual phone only the bootloader if that is the case is there anyway to go back to stock, that isn't a hassle to do?
Click to expand...
Click to collapse
It will tell you the baseband in the bootloader look for radio it will end with 1210
bigdaddy619 said:
It will tell you the baseband in the bootloader look for radio it will end with 1210
Click to expand...
Click to collapse
Yep it does
YoungRose said:
Yep it does
Click to expand...
Click to collapse
Ok download MeanBean it's s-on friendly and it will get his phone running again
http://forum.xda-developers.com/showthread.php?t=2048229
1. download
2. mount the phone to your PC via usb cable
3. go into twrp and press mount then press mount usb storage
4. move MeanBean to your sdcard
5. press unmount
6. go back to the main twrp page select advance wipe if on 2.5.0.0 and select all except OTG or if on an earlier version press wipe and wipe (cache/dalvik cache/system/factory reset)
7. go back to main twrp page an click install and find MeanBean and swipe to flash
8. don't freak out it will take a bit to boot fully
It worked
Sent from my SPH-L710 using xda app-developers app
YoungRose said:
It worked
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Cool glad you got it going
My next suggestion is to get S-OFF using Moonshine and you could downgrade the touch panel drivers and run CM if you wanted
Hello,
I was recently given a bootlooping Evo 4G Lte. I have been trying to figure out how to get this thing out of a bootloop and havent been able to do it. I, unfortunately, have no history on what happened to this device. Currently, it bootloops on the "Mean Bean" loading screen but will go no further. I can get into the bootloader, which says it is Unlocked, S-On, but I am unable to boot it into a recovery, it just returns back to bootloader. I have tried fastbooting twrp, but it fails (remote: image update error), and I have tried fastbooting the Mean Bean kernel thinking maybe thats all it needs, but that failed as well. Anybody have an insight? Much appreciated! Thanks.
Mike
I would run the 3.17 RUU. Hit the top link in my sig and look at the last post in the thread. You can run it from the bootloader. You'll need to re-root afterwards but it should get your phone back in working condition.
Sent from my HTC EVO 4G LTE
FinZ28 said:
I would run the 3.17 RUU. Hit the top link in my sig and look at the last post in the thread. You can run it from the bootloader. You'll need to re-root afterwards but it should get your phone back in working condition.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
Thanks for the quick reply. I downloaded the RUU and ran it. However it sits and says "Waiting for bootloader" then errors out with "USB connection issue". The usb is working. The reason I never ran the RUU in teh first place was because i thought i read that you cant RUU with and unlocked bootloader. Is that not true? or is that my problem?
Mike
Not 100% sure but I will check with someone who used this tool recently and see if they were still unlocked at the time. Were you connected via Fastboot USB? Sounds more like a driver issue.
Sent from my HTC EVO 4G LTE
FinZ28 said:
Shouldn't matter. I know of a couple of users who were having phone issues and had unlocked bootloaders when they ran this tool. Were you connected via Fastboot USB? Sounds more like a driver issue.
Click to expand...
Click to collapse
Yeah I was connected and it said fastboot USB. It said rebooting to bootloader and rebooted, still said fastboot USB. Then it sat at a screen that said "waiting for bootloader" and after a while error ed out.
You can try relocking. You just need to run the command "fastboot oem relock" from a command line while connected via fastboot USB mode.
Sent from my HTC EVO 4G LTE
FinZ28 said:
You can try relocking. You just need to run the command "fastboot oem relock" from a command line while connected via fastboot USB mode.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
I have since tried relocking to see if that was it, and it did the same thing.
Mike
Hopefully @YoFayce can shed some light on the matter since he recently used this on his phone.
Sent from my HTC EVO 4G LTE
FinZ28 said:
Hopefully @YoFayce can shed some light on the matter since he recently used this on his phone.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
crazymike1234 said:
I have since tried relocking to see if that was it, and it did the same thing.
Mike
Click to expand...
Click to collapse
you can use the stock RUU and you can leave the bootloader unlocked as it will not affect anything.. it will fix your looping problem (Amongst others) as in gps not working ect.. once your done you will need to fastboot over your TWRP and from there mod as normal Good Luck! and ill be watching if you need any help!
YoFayce said:
you can use the stock RUU and you can leave the bootloader unlocked as it will not affect anything.. it will fix your looping problem (Amongst others) as in gps not working ect.. once your done you will need to fastboot over your TWRP and from there mod as normal Good Luck! and ill be watching if you need any help!
Click to expand...
Click to collapse
Problem is the ruu keeps error in out. I am beginning to think it may still be a driver problem. Someday I will get this done!
Mike
crazymike1234 said:
Problem is the ruu keeps error in out. I am beginning to think it may still be a driver problem. Someday I will get this done!
Mike
Click to expand...
Click to collapse
When in doubt update your android SDK remove the htc drivers reboot install drivers reboot and you should be good to go! Check the integrity of your USB cable and if possible use a rear USB port (More Power) Painful process yes but well worth it.. HTC drivers act strange till you reboot OOOh and make sure your using the proper HTC drivers for windows 32 bit or 64 bit!
YoFayce said:
When in doubt update your android SDK remove the htc drivers reboot install drivers reboot and you should be good to go! Check the integrity of your USB cable and if possible use a rear USB port (More Power) Painful process yes but well worth it.. HTC drivers act strange till you reboot OOOh and make sure your using the proper HTC drivers for windows 32 bit or 64 bit!
Click to expand...
Click to collapse
The drivers seem to be ok, but I am still not able to get any further. The RUU finds my phone, then reboots again to bootloader, but it just sits there saying "Waiting for bootloader" until it errors out due to "USB Connection error". I have tried a few different cables, and different USB ports. Not sure what the problem is but it just wont go any further. I re-unlocked my bootloader with htcdev. I have tried fastbooting a recovery to the phone but it errors out. I just cant get anything to work so I can boot anything. I really just want to get something working...anything! Any other ideas? Thanks.
Mike
use an sd card put a recovery image on the root of the sd boot into bootloader apply the recovery you should then have a recovery if you did it right, go into twrp mount device add a rom flash in recovery viola.
Sinistertensai said:
use an sd card put a recovery image on the root of the sd boot into bootloader apply the recovery you should then have a recovery if you did it right, go into twrp mount device add a rom flash in recovery viola.
Click to expand...
Click to collapse
Sinister,
Thanks for the reply. I put TWRP on the sdcard (named PJ75IMG, right?) and tried to apply that when I rebooted to recovery last night and it failed. It tries to load it but gives a few errors quick (No Image) Did I do it wrong?
Mike
crazymike1234 said:
Sinister,
Thanks for the reply. I put TWRP on the sdcard (named PJ75IMG, right?) and tried to apply that when I rebooted to recovery last night and it failed. It tries to load it but gives a few errors quick (No Image) Did I do it wrong?
Mike
Click to expand...
Click to collapse
make sure the file is just the PJ75IMG no additional text and it should be .zip If I recall correctly. make sure its on the root of the sdcard not internal but sd or external and it should be at the top level e.g. sdcard/ make sure its not in any other folders after you do that hold power and vol down get to hboot screen itll scan and then just follow the instructions.
Sinistertensai said:
make sure the file is just the PJ75IMG no additional text and it should be .zip If I recall correctly. make sure its on the root of the sdcard not internal but sd or external and it should be at the top level e.g. sdcard/ make sure its not in any other folders after you do that hold power and vol down get to hboot screen itll scan and then just follow the instructions.
Click to expand...
Click to collapse
Thats exactly what I did. It is the only thing on the sdcard. It says no gift file, Loading, no image for 4 different things. Then returns to the bootloader.
Mike
crazymike1234 said:
Thats exactly what I did. It is the only thing on the sdcard. It says no gift file, Loading, no image for 4 different things. Then returns to the bootloader.
Mike
Click to expand...
Click to collapse
zip files probably corrupt then. download another do the same process make sure you've got a good file use md5 checks
Sinistertensai said:
zip files probably corrupt then. download another do the same process make sure you've got a good file use md5 checks
Click to expand...
Click to collapse
Hmmm, Ill try download again. I got it from the main TWRP site.
crazymike1234 said:
Hmmm, Ill try download again. I got it from the main TWRP site.
Click to expand...
Click to collapse
careful on the vol down press you might be holding it too long and its canceling the update.
Sinistertensai said:
careful on the vol down press you might be holding it too long and its canceling the update.
Click to expand...
Click to collapse
Well, which recovery file should I be using? When I use the main TWRP ones (ie openrecovery-twrp-2.6.0.0-jewel.img) it gives me the errors like I said above. I now see they have a few labeled like this PJ75IMG-twrp-2.3.1.0-jewel.zip. When I use these, it tries to continue but says "Main Version Is Older. FAILED"
I relocked my bootloader anticipating to flash my RUU, but the bootloader doesn't recognize SD. Do I run the exe? Is it possible for me to adb w/o os? I never fked things up so bad lol. Forgot I had a custom rom...
EvoGuy2010 said:
I relocked my bootloader anticipating to flash my RUU, but the bootloader doesn't recognize SD. Do I run the exe? Is it possible for me to adb w/o os? I never fked things up so bad lol. Forgot I had a custom rom...
Click to expand...
Click to collapse
Just RUU.exe. Works fine without even relocking bootloader. Cheers!
rdasante said:
Just RUU.exe. Works fine without even relocking bootloader. Cheers!
Click to expand...
Click to collapse
I tried that, but I couldn't recognize device? It says error couldn't find blah blah...
I have no os, can't get to recovery...
EvoGuy2010 said:
I tried that, but I couldn't recognize device? It says error couldn't find blah blah...
Click to expand...
Click to collapse
Did you enable usb debugging?
---------- Post added at 05:29 PM ---------- Previous post was at 05:25 PM ----------
EvoGuy2010 said:
I have no os, can't get to recovery...
Click to expand...
Click to collapse
Which screen is your phone currently booted to? Can you get into download mode? Try pressing both volume keys and power button at the same time. We'll take it from there
I can go to download mode.
Okay, good.
Connect phone and open command on PC and issue this command: fastboot devices
Check to see if your device shows up. If it does issue this command: fastboot rebootRUU
And then flash RUU.exe from computer.
Alternatively, select 'bootloader' in download mode. Once there select recovery and let me know what happens
rdasante said:
Okay, good.
Connect phone and open command on PC and issue this command: fastboot devices
Check to see if your device shows up. If it does issue this command: fastboot rebootRUU
And then flash RUU.exe from computer.
Alternatively, select 'bootloader' in download mode. Once there select recovery and let me know what happens
Click to expand...
Click to collapse
The thing is I had a custom rom before relocking so my recovery doesn't boot. It boot loops and then after a few minutes goes back to boot loader. Right now, I can boot to boot loader and download mode. I will try a different laptop just in case the drivers aren't working. I'm taking a lecture right now so I'll do that as soon as I get home.
EvoGuy2010 said:
The thing is I had a custom rom before relocking so my recovery doesn't boot. It boot loops and then after a few minutes goes back to boot loader. Right now, I can boot to boot loader and download mode. I will try a different laptop just in case the drivers aren't working. I'm taking a lecture right now so I'll do that as soon as I get home.
Click to expand...
Click to collapse
try reflashing recovery, if you can
Reach me on Hangouts: rdasante
Faster to communicate that way.
rdasante said:
Just RUU.exe. Works fine without even relocking bootloader. Cheers!
Click to expand...
Click to collapse
rdasante said:
Reach me on Hangouts: rdasante
Faster to communicate that way.
Click to expand...
Click to collapse
Thanks for your support! I was able to flash my RUU through fat32 SD... I realized I had to use download mode, volume up, the system started installing the ruu, I'm good to go... Thank you man!
EvoGuy2010 said:
Thanks for your support! I was able to flash my RUU through fat32 SD... I realized I had to use download mode, volume up, the system started installing the ruu, I'm good to go... Thank you man!
Click to expand...
Click to collapse
Enjoy man!!