I need help to choose a ROM - Android Q&A, Help & Troubleshooting

Hi,
I have a "Positivo YPY AB10E" tablet. It's from brazil, but i think it's made in china. The manufacturer do not released any update.
I'd like to install a clean ROM, with android 4.4.4, so i need your help to choose the better ROM to this case.
The specifications:
- CPU Architeture: ARM Cortex A9
- Cores: 2
- Revision: r3p0
- Process: 40nm
- Clock Speed: 252 MHz - 1,51 GHz
- GPU Vendor: ARM
- GPU Renderer: Mali-400 MP
- Scaling Governor: Interactive
- Screen size: 10"
- Screen Resolution: 1280x752
- Screen Density: 160 dpi
- RAM: 1GB
- Board: rk30sdk
I assume any risk, i Only need your help.
Thank you all
Juliano

Related

Please help with recognize my tablet

Hello i need help with recognization Tablet witch name is Orange Funtab 7.0 and specification from An Tu Tu is:
Device: nuclear-f721
Manufacturer
Model: KF012
Producer: Softwinners
CPU: sun5i
Model CPU: ARMv7 Processor (VFPv3, NEON)
Frequency CPU: 30.0 - 1200.0 Mhz
Screen resolution: 800x432
Producer GPU: ARM
Model GPU: Mali-400 MP
OpenGL: OpenGL ES 2.0
Size of memory: 698 / 1007,9 MB
Size RAM: 202,5 / 353,5 MB
Size SD: 1912,2 / 2031,5 MB
Android: 4.0.4
Compilation number: 20120824-KF012
And from Box is:
• 7-inch touch screen with multitouch
• Resolution screen 800×480
• Processor 1.0GHz
• GPU Mali 400
• System Android 4.0
• RAM: 512MB DDR2
• Flash memory 4GB
• Wi-Fi 802.11b/g/n
• Camera
• Accelerometer
• Card slot: microSD
• Headphones – jack 3,5mm
• Battery 2950 mAh
link to photo: http://allegro.pl/nowy-tablet-funtab-7-0-od-loombard-pl-i2891829206.html
Thanks a lot and please for answer what is this tablet production. Adrek, sorry for may english.
I have this device too, and I think it's Kiano Young II or Young IIs, but I'm not sure.
kynoo said:
I have this device too, and I think it's Kiano Young II or Young IIs, but I'm not sure.
Click to expand...
Click to collapse
Is there any way to upgrade it to 4.1.2 ANY custom rom by Vol+ + power button recovery?
Stock rom is lazy , slowly, laggy ..

Porting to a Mtk6735 Device (Cubot X17)

Afternoon all,
I have a Cubot X17 (MT6735) Device, now I'm seeing a lack of ROMs for this phone or information on regarding porting.
One thing I have noted with some of the guides I have found, is they require the MT device to have the same chip and GPU, I have managed to acquire the following information of my phone as speaking to the manufacture when they are releasing Marsh Mallow is like talking to a brick wall.
My CPU
Code:
SoC Model: MediaTek MT6735
Core Architecture: 4x ARM Cortex-A53 @ 1300 MHz
Manufacturing Process: 28 nm
Instruction Set: 64-bit ARMv8-A
CPU Revision: r0p3
CPU Cores: 4
CPU Clock Range: 299 - 1300 MHz
Core 1 Clock: 1300 MHz
Core 2 Clock: 1300 MHz
Core 3 Clock: 1300 MHz
Core 4 Clock: (sleeping)
CPU Utilization: 17 %
Scaling Governor: interactive
Supported ABIs: arm64-v8a, armeabi-v7a, armeabi
Supported 32-bit ABIs: armeabi-v7a, armeabi
Supported 64-bit ABIs: arm64-v8a
AES: Supported
NEON: Supported
SHA1: Supported
SHA2: Supported
My GPU
Code:
<< OpenCL Device - Mali-T720 >>
Device Name: Mali-T720
Device Type: GPU
Device Vendor: ARM
Device Vendor ID: 0x07201000
Device Version: OpenCL 1.1
Device Profile: Full
Driver Version: 1.1
OpenCL C Version: OpenCL C 1.1
Clock Rate: 5 MHz
Compute Units: 2
Anyone shed some light as to if I can port or not. and if not alternative methods?
Try to read around XDA (search)... Found a thread explaining porting of MTK roms..
Found anything yet?
hey mate. I have a Smart Grand sp which is exactly like yours, only the brand name and the model name are different. have you found anything yet? does the ROM need to get ported? can we just flash a ROM from some phone which has exactly the same hardware? (i.e: your phones ROM on my phone?)
Sorry for the amateurish and stupid question if it is, cuz I don't have enough info in this regard.
hope to hear your answer and thank you in advance

Suitable Custom Rom for my special device ... GLX T3 tablet

Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) ROM for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above.
Good to notice that my device is not in the list of supported devices by ClockworkMod:
Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.​
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Thanks in advance.
Mir-Ismaili said:
Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) ROM for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above.
Good to notice that my device is not in the list of supported devices by ClockworkMod:​Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.​
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Thanks in advance.
Click to expand...
Click to collapse
I want this

My Phone Closing Every Change

Hi. My phone closing (freezing) every ROOT change. I'm rooted with super su. Device İnfo:
DevCheck Report
Vestel
Venus Z10
May 28, 2019 1:43
Uptime: 7m 46s
Deep sleep: 0s (0%)
HARDWARE
Qualcomm® Snapdragon™ 435
Hardware: MSM8940
Cores: 8
CPU:
Cortex-A53
Process: 28 nm
Frequencies:
960 MHz - 1401 MHz
768 MHz - 1094 MHz
Governor: interactive
GRAPHICS
Vendor: Qualcomm
GPU: Adreno (TM) 505
OpenGL: OpenGL ES 3.2 [email protected] ([email protected], I1ef8061d77) (Date:03/28/18)
Max frequency: 475 MHz
Resolution: 1920 x 1080
Screen density: 423.63602 ppi
Screen size: 5.2 in / 132 mm
Panel: boe td4300 1080p video mode dsi panel
RAM
RAM size: 4.0 GB
Type: LPDDR3 933 MHz
OTHER HARDWARE
Bluetooth support: yes
Bluetooth LE support: yes
USB host support: yes
Infrared transmitter: no
NFC support: no
DEVICE
Model: Venus Z10
Codename: Reys
Manufacturer: Vestel
Serial Number: 2787379617001405
SYSTEM
Android Version: 8.1.0 (Oreo)
Build: VR2230 release-keys
Security patch: September 1, 2018
Root access: Device is rooted
Architecture: aarch64 (64-bit)
Instruction sets: arm64-v8a armeabi-v7a armeabi
Kernel: 3.18.71-perf

[HELP] Navtech Freeme Stylo S55 Root and CFW

Hi guys,
I recently bought this phone called Navtech Freeme Stylo S55. I've been trying various ways to get root access but I've been failing. Here are the basics specifications of the device.
HTML:
Device
Manufacturer Navtech
Model ID Ruby
Android Version 8.1.0
Kernel Version 3.18.79
Battery Capacity 1000 mAh
SoC (Processor)
Architecture ARM (armv7l)
SoC Model MediaTek MT6580
SoC Family 4x ARM Cortex-A7 @1,30 GHz
Frequency 1300 MHz / Min: 604 MHz - Max: 1300 MHz
Main CPU Cores 4 Cores / 4 Threads
Process 28 nm
CPUID 41.0.7.C07.3
Revision R0P3
Features HALF THUMB FASTMULT VFP EDSP NEON VFPV3 TLS VFPV4 IDIVA IDIVT VFPD32 LPAE EVTSTRM
Bogomips 33.17 MIPS
Display (GPU / LCD)
SoC Manufacturer ARM
SoC Model Mali-400 MP
OpenGL Ver. 2.0
LCD Size 4.5 inches / 11.4 cm
LCD Resolution 480 x 960 pixels
LCD Definition 204 DPI
Memory
RAM 951 MB (1 GB)
Flash 5253 MB
Embedded Sensor
Sensor #1 ACCELEROMETER
Sensor #2 PROXIMITY
Can you please assist me in the process of Rooting the device.
Thanks in advance.

Categories

Resources