Hi guys,
I recently bought this phone called Navtech Freeme Stylo S55. I've been trying various ways to get root access but I've been failing. Here are the basics specifications of the device.
HTML:
Device
Manufacturer Navtech
Model ID Ruby
Android Version 8.1.0
Kernel Version 3.18.79
Battery Capacity 1000 mAh
SoC (Processor)
Architecture ARM (armv7l)
SoC Model MediaTek MT6580
SoC Family 4x ARM Cortex-A7 @1,30 GHz
Frequency 1300 MHz / Min: 604 MHz - Max: 1300 MHz
Main CPU Cores 4 Cores / 4 Threads
Process 28 nm
CPUID 41.0.7.C07.3
Revision R0P3
Features HALF THUMB FASTMULT VFP EDSP NEON VFPV3 TLS VFPV4 IDIVA IDIVT VFPD32 LPAE EVTSTRM
Bogomips 33.17 MIPS
Display (GPU / LCD)
SoC Manufacturer ARM
SoC Model Mali-400 MP
OpenGL Ver. 2.0
LCD Size 4.5 inches / 11.4 cm
LCD Resolution 480 x 960 pixels
LCD Definition 204 DPI
Memory
RAM 951 MB (1 GB)
Flash 5253 MB
Embedded Sensor
Sensor #1 ACCELEROMETER
Sensor #2 PROXIMITY
Can you please assist me in the process of Rooting the device.
Thanks in advance.
Related
Hi,
I have a "Positivo YPY AB10E" tablet. It's from brazil, but i think it's made in china. The manufacturer do not released any update.
I'd like to install a clean ROM, with android 4.4.4, so i need your help to choose the better ROM to this case.
The specifications:
- CPU Architeture: ARM Cortex A9
- Cores: 2
- Revision: r3p0
- Process: 40nm
- Clock Speed: 252 MHz - 1,51 GHz
- GPU Vendor: ARM
- GPU Renderer: Mali-400 MP
- Scaling Governor: Interactive
- Screen size: 10"
- Screen Resolution: 1280x752
- Screen Density: 160 dpi
- RAM: 1GB
- Board: rk30sdk
I assume any risk, i Only need your help.
Thank you all
Juliano
Hello folks. I have an intriguing brazilian tablet POSITIVO YPY_ABD10 and was wondering if it is possible to put some custom rom or custom recorevery or any other rom compatible on it and then try to change the rom because it comes in it is terrible.
I try to followed these tutorials here on forum:
//slatedroid.com/topic/40623-aml-flash-tool-aka-imageburntool/
//slatedroid.com/topic/41478-how-to-unbrick-your-amlogic-aml8726-mx-series-tablet-v20/
//slatedroid.com/topic/95977-howto-create-a-rescue-sd-card-for-pretty-much-every-amlogic-8726-mx-device/
and I try too some roms but so far no effective success... I think only worsened the situation somewhat for before he was "soft bricked" and now is "hard bricked" before I could get into recovery mode that came with him by pressing the "power + vol+" and now the sign of life he gives is when I press "power + vol-" and computer recognizes as "M3 CHIP", then I try burn some rom with the flash tool but still no success yet ...
Presentation of it ... ¬ ¬ '
//youtube.com/watch?v=tmqS-76l5r0
Specs:
Positivo YPY_ABD10
Operating System Android 4.0.4
Model Positivo YPY_AB10D
Processor ARM AMLOGIC @ 1.00 GHz
1 processor
Processor ID ARM implementer 65 architecture 7 variant 2 part 3081 revision 4
L1 Instruction Cache 0 KB
L1 Data Cache 0 KB
L2 Cache 0 KB
L3 Cache 0 KB
Motherboard f03ref_NX
BIOS
Memory 652 MB
-------------------------
CPU
Load Average: 3.00 3.01 3.17 1/664 3934
Processor: ARMv7 Processor rev4(v7L)
BogoMIPS: 655.36
Features: swp half thumb fastmult vfp edsp neon vfpv3
CPU Implementer: 0x41
CPU architecture: 7
CPU variant: 0x2
CPU part: 0xc09
CPU revision: 4
Hardware: AMLOGIC MESON3 8726M SKT SH
Revision: 0020
Serial: 000000000000000c
What are my options? Help me please. :help:
Thank you all. (Sorry my english)
Afternoon all,
I have a Cubot X17 (MT6735) Device, now I'm seeing a lack of ROMs for this phone or information on regarding porting.
One thing I have noted with some of the guides I have found, is they require the MT device to have the same chip and GPU, I have managed to acquire the following information of my phone as speaking to the manufacture when they are releasing Marsh Mallow is like talking to a brick wall.
My CPU
Code:
SoC Model: MediaTek MT6735
Core Architecture: 4x ARM Cortex-A53 @ 1300 MHz
Manufacturing Process: 28 nm
Instruction Set: 64-bit ARMv8-A
CPU Revision: r0p3
CPU Cores: 4
CPU Clock Range: 299 - 1300 MHz
Core 1 Clock: 1300 MHz
Core 2 Clock: 1300 MHz
Core 3 Clock: 1300 MHz
Core 4 Clock: (sleeping)
CPU Utilization: 17 %
Scaling Governor: interactive
Supported ABIs: arm64-v8a, armeabi-v7a, armeabi
Supported 32-bit ABIs: armeabi-v7a, armeabi
Supported 64-bit ABIs: arm64-v8a
AES: Supported
NEON: Supported
SHA1: Supported
SHA2: Supported
My GPU
Code:
<< OpenCL Device - Mali-T720 >>
Device Name: Mali-T720
Device Type: GPU
Device Vendor: ARM
Device Vendor ID: 0x07201000
Device Version: OpenCL 1.1
Device Profile: Full
Driver Version: 1.1
OpenCL C Version: OpenCL C 1.1
Clock Rate: 5 MHz
Compute Units: 2
Anyone shed some light as to if I can port or not. and if not alternative methods?
Try to read around XDA (search)... Found a thread explaining porting of MTK roms..
Found anything yet?
hey mate. I have a Smart Grand sp which is exactly like yours, only the brand name and the model name are different. have you found anything yet? does the ROM need to get ported? can we just flash a ROM from some phone which has exactly the same hardware? (i.e: your phones ROM on my phone?)
Sorry for the amateurish and stupid question if it is, cuz I don't have enough info in this regard.
hope to hear your answer and thank you in advance
I'm going to tell the entire story.
It all started with me thinking about rooting my phone, so I searched some guides...
I did all the process, my Moto G5 Plus was rooted and I tried to update my phone with an OTA.
It got to bootloop and I got stuck and mad.
I searched for more and found about custom ROMs. I installed an unofficial version of LineageOS 15 for my phone and it worked good, but it wasn't the same as with the stock ROM (The camera app didn't work properly).
So, I saw more guides for getting to the stock ROM.
I did all the process (Download the ROM, go to bootloader, connect to the PC, do the commands in ADB and Fastboot) and I got the ROM and 2 OTA updates but I lost apps from the play store and I believe that updates for system apps (Because a friend of mine has the same phone and he has more updates... He got an update for the camera and for the Moto app).
I thought that if I locked bootloader again, I could get these updates...
I found some videos on internet about people locking it with some commands (I think one was "fastboot oem lock") and some people makes it and locks the phone while others (like me) get a problem about a "signed ROM".
I think I am about to cry at this point, I just want the bootloader locked and everything like before but probably I am not going to make it. It is never going to be like before.
I loved my phone and I regret everything I did in the past weeks.
Even if I can't get those apps from the play store back, I just want to lock the bootloader (I hate that warning always reminding me about the bootloader).
And, can someone tell me if I am going to get Oreo with the phone like this? Because I don't think I can get what I want (I don't want the warranty, I want the apps and updates from Motorola and I want Oreo... Because I think my friend is going to get it and I will not).
Thanks in advance and have a nice day :')
Here are the specs of my phone (I used CPU Z):
It doesn't mention it (I believe) but my current build number is:
NPNS25.137-78-4
Info:
CPUs : 8
SoCs : 1
CPU 0 :* ARMv7 Processor rev 4 (v7l)
Name : Qualcomm Snapdragon 625
CPUs : 8
Core set 0 : ARM Cortex-A53
Core set 0 Nb Cores : 8
Core set 0 Max Clock : 2016 MHz
Core set 0 Impl.id : 0x41
Core set 0 Arch.id : 0x7
Core set 0 Var.id : 0
Core set 0 Part.id : 0xd03
Core set 0 Rev.id : 4
Core set 0 Revision : r0p4
Arch : 8x ARM Cortex-A53 @2.02 GHz
Codename :*
Process : 14 nm
GPU Vendor : Qualcomm
GPU Renderer : Adreno (TM) 506
Model : Moto G (5) Plus (potter_n)
Manufacturer : motorola
Board : msm8953
Hardware : qcom
Android Ver. : 7.0
Kernel Arch. : armv7l
Battery capacity : 3000
--- CPUInfos ---
abi : armeabi-v7a
abi2 : armeabi
supported abis : [armeabi-v7a, armeabi]
supported 32-bit abis : [armeabi-v7a, armeabi]
supported 64-bit abis : []
processor : 0
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm aes pmull sha1 sha2 crc32*
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 1
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm aes pmull sha1 sha2 crc32*
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 2
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm aes pmull sha1 sha2 crc32*
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 3
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm aes pmull sha1 sha2 crc32*
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 4
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm aes pmull sha1 sha2 crc32*
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 5
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm aes pmull sha1 sha2 crc32*
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 6
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm aes pmull sha1 sha2 crc32*
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 7
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm aes pmull sha1 sha2 crc32*
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : Qualcomm Technologies, Inc MSM8953
Revision : 83b0
Serial : 1a9dd0e600000000
Processor : ARMv7 Processor rev 4 (v7l)
Device : potter
Radio : LATAM
MSM Hardware : MSM8953
--- Debug Infos ---
20=bms=34500
21=chg_therm=37
22=xo_therm=35
23=xo_therm_buf=35
24=msm_therm=34
25=chg_temp=41892
26=tsens_tz_sensor0=521
27=tsens_tz_sensor1=459
28=tsens_tz_sensor2=436
29=tsens_tz_sensor3=443
30=tsens_tz_sensor4=521
31=tsens_tz_sensor5=518
32=tsens_tz_sensor6=521
33=tsens_tz_sensor7=524
34=tsens_tz_sensor8=534
35=tsens_tz_sensor9=492
36=tsens_tz_sensor10=508
37=tsens_tz_sensor11=505
clock 0=2016000
clock2 0=201600
clock 1=2016000
clock2 1=201600
clock 2=2016000
clock2 2=201600
clock 3=2016000
clock2 3=201600
clock 4=2016000
clock2 4=201600
clock 5=2016000
clock2 5=201600
clock 6=2016000
clock2 6=201600
clock 7=2016000
clock2 7=201600
One last question:
When I had my stock phone, I installed MX Player in the play store. When I opened it, it said that it required the ARM v7 Neon Codec.
But now, after all of this, I installed the app once again and it didn't ask for it. Is this normal?
i have a tablet ALPS SH-7208, but is installed a custom rom.
I would like to install another rom, stock or not, but i want to change the actual.
can someone help me to found a compatible rom and guide to install ?
Thank you
Below the system info
DROID INFO REPORT
DEVICE
Model: SH-7208 (tongjun72_et_jb3)
Manufacturer: alps
Baseband Version: MOLY.WR8.W1315.MD.WG.MP.V11.P1, 2014/01/02 19:58
RIL Version: mtk gemini ril 1.0
Build Number: ALPS.JB3.MP.V1.17
Build Fingerprint: alps/tongjun72_et_jb3/tongjun72_et_jb3:4.2.2/JDQ39/1404288553:user/test-keys
Bootloader: unknown
Java VM: Dalvik 1.6.0
OS Version: Jelly Bean MR1 (4.2.2)
SDK: 17
DISPLAY
Resolution: 600x1024 pixels
Software Density: 240 dpi (hdpi)
Refresh Rate: 0.49 Hz
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: tongjun72_et_jb3
Chipset: MT6572
Cores: 2
Clock Speed: 806 MHz - 1209 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU Governor: hotplug
Kernel Version: 3.4.5
Kernel Architecture: armv7l
GRAPHICS
Renderer: Mali-400 MP
Vendor: ARM
OpenGL Version: OpenGL ES 2.0
RAM
Total: 972 MB
Java Heap: 96 MB
STORAGE
Internal: 1.3 GB
EXTERNAL: Not Detected
Click to expand...
Click to collapse
Stock ROM is here:
MT6572__alps__A736__tongjun72_et_jb3__4.2.2__ALPS.JB3.MP.V1.17. FLASHFILE ! FIRMWARE DOWNLOAD | CFirmware - Mobile Phone Flashing, Unlocking and, Latest Firmwares Available.
www.cfirmware.com
jwoegerbauer said:
Stock ROM is here:
MT6572__alps__A736__tongjun72_et_jb3__4.2.2__ALPS.JB3.MP.V1.17. FLASHFILE ! FIRMWARE DOWNLOAD | CFirmware - Mobile Phone Flashing, Unlocking and, Latest Firmwares Available.
www.cfirmware.com
Click to expand...
Click to collapse
i cannot download from this site, do you have alternatives ?