[ROM][CM11][UNOFFICIAL] CyanogenMod 11 **for VS985 ONLY** - Verizon LG G3

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Kernel Source: https://github.com/CyanogenMod/android_kernel_lge_g3
Click to expand...
Click to collapse
Yup. It's finally here. CM11 with basically everything* working.
*Working:
Pretty much everything:
2G/3G/LTE (no Roaming bug)
Camera (back and front-facing and LED flash, no 4K recording as it's not in CM yet)
Sound
Bluetooth Media, Wearable connections (tested with a Moto 360 and JayBird Bluebuds X BT Headset, even at the same time, and it works fine)
Screen (duh)
Proximity, Accelerometer, Gyroscope
SDCard read/write
Not working:
Wireless Charging (it works but it's very, very slow ( @invisiblek pls fix))
Bluetooth Calls (Media works perfectly fine, and even when connected with a wearable, but BT calls don't work (sound comes through, but people cannot hear you))
"GPS is a little derpy" - @invisiblek 2014 (you'll get a lock, but it'll probably take you a little bit)
Installation Instructions:
*NOTE*: You must be Bump'd for this to work. This requires flashing via custom recovery.
1. Download this and GApps (recommended PA GApps here)
2. Put both on Internal Storage
3. Reboot into recovery
4. BACKUP CURRENT ROM
5. Factory Reset/Wipe
6. Flash CM11 (no need to wipe System)
7. Flash GApps
8. Reboot
9. ???
10. Profit
Download: here (new builds will also show up in there)
Please note that I'm not the official maintainer ( @invisiblek is). I take absolutely no credit other than getting him off his ass to fix stuff. Everything is his and the CM team's work (and whoever helped him).

First!!!!! Woohooo Ty

Using a stock kernel with cm? Didn't think that was an option. BTW...second.
Sent from my VS985 4G

Thank you
I know what I'm doing tonight.

workdowg said:
Using a stock kernel with cm? Didn't think that was an option. BTW...second.
Sent from my VS985 4G
Click to expand...
Click to collapse
It's CM kernel. Source link updated in OP.

Making a fresh backup then time to flash! Thanks for this! My G3 has been craving some cm11.

I didn't think they released bump for kernels, so I'll take it!! Thanks for this.

Is there screen sharpening?

kdouvia said:
Is there screen sharpening?
Click to expand...
Click to collapse
None that I notice, looks like the stock Android color profile.

And. Here. We. Go

Exactly how derpy is the GPS? Is the delay in getting a signal super long?

After using the LG ui since I got the phone at release, it's ridiculous how smooth this is. Very noticeable difference in performance. Thank you

I've been using cm since my galaxy S! Love the ui simple yet effective. Cm never had let me down.

All I can say is..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you :highfive:

Titanium backup was getting stuck at 0% when restoring. Had to install supersu from play store and reboot to get it going. Hope it helps someone

First Test Report..... SUCCESSFUL
After Testing around with the unofficial build I can whole-heartedly say... good work devs!
We have a working build of CM 11 Running on a VS985
Everything seems to be working, although the dpi / resolution bug that makes the device run/look more like a tablet than a phone (See photos)
Need Proof??
https://drive.google.com/file/d/0B7fYS45zfjNEUFFhbG9nWkxoSXNzaHdhUjY1T0kwWmR1UkJv/view?usp=sharing
https://drive.google.com/file/d/0B7fYS45zfjNEcmVrSVQ0d3NMdS1yNTQ4TXh5SENaNEJTVnBJ/view?usp=sharing
https://drive.google.com/file/d/0B7fYS45zfjNER1c2ZXA5dXowWWN2ZnFUOWhFTk5GcWNYOXhN/view?usp=sharing
https://drive.google.com/file/d/0B7fYS45zfjNERW5jLVlBU09lVjlnbWRhVVdpdWJvZVcyNk0w/view?usp=sharing

http://youtu.be/Y3-aAx4SOn0
personally, i've got to wait, bluetooth calling is like the number 1 most important thing for my use.

Eighteenth!
Okay, I'm a little slow.
Great job @invisiblek and team!

Using it now! Had to get SuperSU like someone suggested and changed the DPI to stock. Looks great. Immediately notice a speed difference

Awesome thanks devs! Until the Bluetooth bug gets fixed I cant use it since I use BT all day. But does this use the laser autofocus on the camera?

Related

[ROM] CyanogenMOD 7 for the Sunfire

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
This version is an unofficial release candidate, but you will find it stable for everyday use.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7.2 your device, or coming from another ROM?
Unlock the Photon's Bootloader (Pudding is here)
Root the device and install ClockworkMod Recovery. Instructions might be available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Known Issues
WiMax is not working for the Sprint variant yet. USCC variant does not have WiMax functionnality.
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
CyanogenMod:
Latest nightly version: available on http://get.cm/?device=sunfire​Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link​
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
(zoinks 2nd post)
(zoinks 3rd)
Holy nightlies, batman!
I can honestly say I am excited
Yeah um...
So this happened:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm just sayin'.
zomg, wuts that screenshot mean?
cybik said:
Yeah um...
So this happened:
I'm just sayin'.
Click to expand...
Click to collapse
Like a boss.
Anyone know where I can get themed or inverted gapps for CM7?
congrats man! you deserved. If need any help, feel free to ask
Congrats.
I installed the rom, and for some reason my contacts won't show up. I've added them from my google account, and that didn't work, so I added them from an export I had on the sd card and still nothing. Any suggestions.
The contacts updated. I was wondering if there is a way to get the blur email app on here. I like the style of the blur app. It's convenient when you want to send an email that the compose button is right on the initial opening of the email. You don't have to hit the setting button to pick compose.
Since this is a brand new thread, I'll be nice.
No feature requests, and especially not Blur integration requests, are to be on this thread. This is pure CM7, no more, no less. This is not a custom BLUR rom distribution, and this is especially not a support thread.
Tl;dr: no.
Thanks understood
So, any major differences between this version of CM7 and the one cougar is working on?
Just curious.
Will you be doing a cm9 now? You and cougarcougar have done such a great job on your solo builds of cm7 I can't wait to see a cm9 from you
Sent from my I9300 using XDA
devilsshadow said:
So, any major differences between this version of CM7 and the one cougar is working on?
Click to expand...
Click to collapse
This is pure CM7 without "KANG" features and tweaks.
Sent not from your device!
ryan8r said:
devilsshadow said:
So, any major differences between this version of CM7 and the one cougar is working on?
Click to expand...
Click to collapse
This is pure CM7 without "KANG" features and tweaks.
Click to expand...
Click to collapse
What Ryan said.
tsdeaton said:
Just curious.
Will you be doing a cm9 now? You and cougarcougar have done such a great job on your solo builds of cm7 I can't wait to see a cm9 from you.
Click to expand...
Click to collapse
I don't feel my time would be well-spent on writing patches for a system that runs at BEST with heavy hacks, at worst with heavy UGLY hacks, and you can add to that the fact that there's features I want to bake in CM7 that i need to concentrate on, such as a unified settings-integrated protocol switcher (CDMA/CDMA+GSM/GSM Only/Whatever the f else).
Right now, spreading myself on two different tasks would be at best not useful, since I have some difficulties focusing on tasks as it is.
But don't worry. I promise to try my hand at the cold dessert as soon as nVidia and Sprint/UScc release/leak ICS-fully-compatible binary blobs for the sunfire. I mean, I _did_ make it run some months ago. It just was as useful as a baby that just learned to walk: all over everywhere and soo f'in cool, yet not exactly useful because there's so many parts missing it's not even funny (for example, speech in a baby's case, and audio in the Sunfire's case)
pure CM7 is the way to go! i hate tweaked out and themed roms.
Everytime I reboot the phone I forget to ok the com.android.phone fc. Once I realized it my phone blew up with texts and missed calls from the wife, basically berating me for hacking my phone...lol. I told her she's missing out, and she told me I'm missing out on her trying to call me, which is the point of having a phone. She's not sold yet, but I'm sure I will soon. Thanks for the hard work.

[ROM] [UB] [Kitkat] [4.4.2] Unofficial CyanogenMod 11.0 [Updated 06.04.2014]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.2 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Instructions how to flash:
First time flashing CyanogenMod 11 your device, or coming from another ROM?
1 Download the zip(s).
2 Extract boot.img and flash via Fastboot
3 Boot into recovery
4 Perform a NANDroid backup of your current ROM.
5 Full wipe[data, cache, format system].
6 Flash CyanogenMod Rom Zip.
7 Optional: Install the Google Apps addon package.
8 Reboot.
Working:
Code:
RIL
Camera
Torch
Mobile Data
Mic
Android Beam
Audio
GPS
Vibration
Auto Brightness
SD Card
Airplane Mode
LEDs
Daydream
WiFi
Auto Rotation
System Monitor
USB Tethering
CWM touch recovery [All credits to @munjeni for this and being Open source]
OMX
Camera Video Recording
Bluetooth (FTP support, A2DP, HSP, HFP, etc)
NFC
Wi-Fi Tethering.
Not working:
Code:
FM radio
Credits: Munjeni, 95A31, Freack(the author of build) Gava97, Andrewasth, areshinakya, Percy_g2, FXP Team, CyanogenMod, Sony and othe Users
Note: This build from sources not a port
Note 2: THIS BUILD NOT BY ME. THIS BUILD BY MY FRIEND FREACK. All credits goes to him)
Sources:
https://github.com/munjeni?tab=repositories
https://github.com/95A31?tab=repositories
https://github.com/Legacy-Xperia
DOWNLOAD ROM AND CHANGELOG:
MOD EDIT: Link removed
Kernel with swapped internal to external SD
LINK
GAPPS:
[GAPPS][4.4.x/4.3.x] OFFICIAL 0-Day PA-GOOGLE APPS (All ROM's)
[MOD] Complete KitKat look: "Goodbye Holo-blue"
LINK
It seems OMX & BT are fixed
but how about the low volume on call it was problem prior to this , is it solved??
and thnxxx mate ........downlaoding :highfive:
patokaz said:
but how about the low volume on call it was problem prior to this , is it solved??
Click to expand...
Click to collapse
Nope:crying:
What about helium does it work on this ROM or any other such app backup application. Thank. Downloading. Can you please upload it to mega.co.nz if possible
Back button works? Does this one have the same bugs as Munjeni's rom?
Akshay24 said:
What about helium does it work on this ROM or any other such app backup application. Thank. Downloading. Can you please upload it to mega.co.nz if possible
Click to expand...
Click to collapse
I dont work it or not because I use TitaniumBackup.
Cant upload on mega because I've limited internet till the end of week
gnome_mo said:
Back button works? Does this one have the same bugs as Munjeni's rom?
Click to expand...
Click to collapse
Yes no more problem with back button, and I hope this rom dont have munjeni's bugs (but Munjeni's rom almost buggless)
Did youport from @percy_g2 or used the sources provided by @xx214718247
Akshay24 said:
Did youport from @percy_g2 or used the sources provided by @xx214718247
Click to expand...
Click to collapse
Read the OP carefully
Rodger_Rulez said:
Read the OP carefully
Click to expand...
Click to collapse
Got it :good:
Thanks!!!
The first Kit Kat Rom with working OMX and Bluetooth.
Can't wait to try, downloading soon.
Thank you soo much :fingers-crossed:
Edit: Downloaded and Working!!
Video is working. Haven't been able to test bluetooth yet.
Soo excited!
Edit:Bluetooth is working, able to recieve and send files. Haven't got any forecloses like reported by some.
The battery life was great. Although it said after about 10 hrs of use that the android system used up most of the battery, almost about 55%
Is that normal? Had this problem also on CM10
Everything is great, only issue is gaming.
Games like RoboCop, Eternity Warriors 2, close down. Unable to play.
Thanks again for a terrific ROM!!
@Akshay24
Change your signature like this:
Unofficial CyanogenMod 11.0 by freack
This buld not mine. This build made by my friend freack
Hot Impression 4.4.2 First Build
Great Rom, installed and using Now flawlessly (Dalvik)! I plan to switch to ART soon to test there also...
I'll continue testing till tomorrow (seems that some localized string inside the system are in some foreign russian-like language, but it's only few of them (ex. User Account info in the Default Tiles)), then i'll report back.
The NFC is now displayed in the Settings but it's always on and cannot turn it off from there (maybe deleting the apk from system in the meantime can help preventing battery drain?).
Thanks for your hard work guys, i will continue testing as far as i can do (i'm not so smart, just trying to help doing something i hope that is "useful") ...
I write this here because i don't know if is something related to the GApps i flashed or is ROM related... (GApps flashed : 1-16_GApps_Standard_4.4.2_signed.zip from ART GApps Compatible thread)
In camcorder, the phone will not take videos. You must change the video resolution (inside the camera app settings) to 720p (setted at 1080p) to make the video recording work. Related to camcorder, seems that the hardware button is not linked to the camera app, so the phone will vibrate but will not open any camera app.
@Rodger_Rulez
What source did you use
:thumbup: Awesome work mate!
Cant wait to download it! Yay!
Sent from my MT27i using XDA Premium 4 mobile app
Which Gapps should I use??
Thanks for this amazing Rom
Can you plese upload it on a different server? Downloading from this server is extremely slow for me - just about 10kb/s :crying:
Thanks a lot :good:
Direct link:
http://fs2.filegir.com/a.r.r/cm_pepper-ota-27012014.zip
this link work in my country but for you...Hope
---------- Post added at 03:15 PM ---------- Previous post was at 03:12 PM ----------
setting give FC !!!
Please provide a link from where I can download GAPPS compatible with this 4.4.2 ROM?
Deleted...
So far so good. Please provide link for GAPPS.

[ROM][7.1.2] Lineage OS 14.1 [RETIRED] & [UNOFFICIAL]

[ROM][7.1.2] Lineage OS 14.1 [RETIRED] & [UNOFFICIAL]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lineage OS is a free, community built, aftermarket firmware distribution of Android 7.1.2 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Lineage OS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). Lineage OS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for Lineage OS is available in the Lineage OS Github repo. And if you would like to contribute to Lineage OS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing Lineage OS 14.1 your device?
Coming from a SENSE ROM?
Enable all location services: Settings > Location > (all location services) = On
Coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash Lineage OS.
Optional: Install the Google Apps addon package.
Changelog
GSM - https://www.cmxlog.com/14.1/t6
Verizon - https://www.cmxlog.com/14.1/t6vzw
Downloads
https://www.androidfilehost.com/?w=files&flid=124499&sort_by=date&sort_dir=DESC
I no longer own this device. If you have fixes, submit them to gerrit and I will build. I will no longer be fixing items.
SuperUser - https://download.lineageos.org/extras
Google Apps:
http://opengapps.org/?api=7.1&variant=nano&arch=arm
How to Build Lineage OS
International - http://wiki.lineageos.org/t6_build.html
Verizon - http://wiki.lineageos.org/t6vzw_build.html
Device Wiki
International - http://wiki.lineageos.org/t6_info.html
Verizon - http://wiki.lineageos.org/t6vzw_info.html
XDA:DevDB Information
Lineage OS 14.1, ROM for the HTC One Max
Contributors
Flyhalf205
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Testing
Created 2016-10-24
Last Updated 2017-08-24
Reserved
Things will be broken such as:
Users being able to post logs when they report problems
Things that might be working:
RIL
Camcorder
Camera takes pictures
Rotation works
WiFi
Bluetooth
Lots more!
Reserved
Great to see CM14 for one Max already here, thanks Flyhalf205
This will be my first flash on a One Max. I'm coming over from a Note 4 (& a S4 before that) on Sprint. I've only been rooting for a few years, but it still gives me that little bit of a rush cause ya never know it, it could brick, bootloop, etc, lol. I've been beta testing for Emotion AOSP for (I dunno), I'd say what feels like a year (it's been Sooo much fun. I'll miss it). Also helped out on XneonHD while it was in operation. Anyways, y'all bare with me & my inexperience on this phone. I've always enjoyed CyanogenMod builds, they're fast, clutter free (I could go on & on). Anyways, wanted to make my presence known, say hey & thank you for the hard work. I look forward to playing around on a phone other then Samsung (it's always fun tryin out somethin new) & getting to run CM is always a plessure.
Overall working properly, bugs found so far :
- Live Display Not Working
- Bluetooth not working
- Camcorder not working
I will report if I found any other bugs.
Thanks
yngieaxl said:
Overall working properly, bugs found so far :
- Live Display Not Working
- Bluetooth not working
- Camcorder not working
I will report if I found any other bugs.
Thanks
Click to expand...
Click to collapse
Thanks for reporting back! Service? I am uploading new builds today.
Verizon build has been uploaded. Please check it out for me. Check the 2nd post for current bugs.
When setting up wlan connection, no connection Wlan probleme
Can someone tell me if they have service? 4G LTE? 3G? Anything?
i can confirm verizon one boots.
Flyhalf205 said:
Can someone tell me if they have service? 4G LTE? 3G? Anything?
Click to expand...
Click to collapse
International Version, LTE working great
@Flyhalf205 sorry for not giving my feedback right away, it just so happen that i have an Intermittent Connection right now. Looking forward to test and try your latest build
hi
my phone is sprint. When my phone want to connect to the network it constantly doing restart, I think my phone frequency corrupt or something else... I dont want to my phone restarting can you help me?
safety1st said:
@Flyhalf205 sorry for not giving my feedback right away, it just so happen that i have an Intermittent Connection right now. Looking forward to test and try your latest build
Click to expand...
Click to collapse
What build were you on? There are two international builds posted. It sounds like you were on my first build I sent you. The second build should work fine.
Verizon version gets LTE but service bar fills up then its empty and speeds are alot slower than expected.
jjayce said:
Verizon version gets LTE but service bar fills up then its empty and speeds are alot slower than expected.
Click to expand...
Click to collapse
Calls and SMS work?
calls and sms seem to work location services as well camera will not record sadly.
jjayce said:
calls and sms seem to work location services as well camera will not record sadly.
Click to expand...
Click to collapse
Next build hopefully will have camera recording fixed. Can you get a lock on google maps without WiFi on?
yes i am actually on google maps locks perfectly no wifi.

[ROM][7.1.2[OFFICIAL] LineageOS 14.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1.2 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for Lineage OS is available in the LineageOS Github repo. And if you would like to contribute to Lineage OS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing Lineage OS 14.1 your device?
Coming from a SENSE ROM?
Enable all location services: Settings > Location > (all location services) = On
Coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash LineageOS.
Optional: Install the Google Apps addon package.
Downloads
AFH - https://download.lineageos.org/himaul
Root - https://download.lineageos.org/extras
Changelog - https://www.lineageoslog.com/14.1/himaul
Google Apps - http://opengapps.org/?arch=arm64&api=7.1&variant=nano
Some stuff may not work.If you want to help fix broken things, please get sufficient logs.
Please Are you put the rom in lineage website or not. Also thank you for great effort
ahmedslorks said:
Please Are you put the rom in lineage website or not. Also thank you for great effort
Click to expand...
Click to collapse
Think not,cause,it's unofficial build...
https://www.lineageoslog.com/14.1/himaul#. In there the last changes of rom
Changes are being made on the lineageos review. https://review.lineageos.org/#/q/project:LineageOS/android_device_htc_hima-common Maybe soon we will be official and have nightlies again.
Well why not be official guys ===>>>. https://review.lineageos.org/#/c/167878/
Remember to post your logcats here if any problems. Need good logcats to attempt to fix anything.
Flyhalf205 said:
Well why not be official guys ===>>>. https://review.lineageos.org/#/c/167878/
Remember to post your logcats here if any problems. Need good logcats to attempt to fix anything.
Click to expand...
Click to collapse
So we got officially lineageOS ?
Great work Flyhalf205, good to see progress being made on the LineageOS hima-common device tree!
Great work!
great work finally the devlopment of htc m9 started to flow again after a breif pause once again back on track
@Flinny opened the window, many thanks to all developers that bring a whole new experience to our M9 devices.
Thank you for your great job.Have a nice time.
Thank you man, good job!
blueberry60 said:
@Flinny opened the window, many thanks to all developers that brings a whole new experience to our M9 devices.
Click to expand...
Click to collapse
Definitely a big shout out to @Flinny for making cam happen.
Flyhalf205 said:
Definitely a big shout out to @Flinny for making cam happen.
Click to expand...
Click to collapse
Quick question: i have installed both HTC camera and gallery from the Google Play Store, but for an odd reason the camera doesn't want to detect the SD Card. The original camera (the old one that was on stock sense) doesn't give the prompt to choose the save location, while the new one (the one from HTC 10) detects the SD but gives an error if i choose to save photos there. Is this a common problem? All the other apps that need access to the sd work flawlessly (like file managers, Spotify, even HTC Gallery)
If you need anything just ask
h4ck3r00 said:
Quick question: i have installed both HTC camera and gallery from the Google Play Store, but for an odd reason the camera doesn't want to detect the SD Card. The original camera (the old one that was on stock sense) doesn't give the prompt to choose the save location, while the new one (the one from HTC 10) detects the SD but gives an error if i choose to save photos there. Is this a common problem? All the other apps that need access to the sd work flawlessly (like file managers, Spotify, even HTC Gallery)
If you need anything just ask
Click to expand...
Click to collapse
You are running a app that is designed to be ran on HTC Sense.
Flyhalf205 said:
You are running a app that is designed to be ran on HTC Sense.
Click to expand...
Click to collapse
So you're telling me that there isn't any chance to save photos and videos to sd if i use htc camera?
Guess i have to live with that.. no problem though.
Thanks
I can confirm mhl working from lineage-14.1-20170404-UNOFFICIAL-himaul !
Quick question. Does it take a LOOOONG time for this ROM to initial boot? I flashed it and stays at the boot animation.
I was on the 3.35.617.12 FW so I tried with the 4.27.617.2 FW for Dev/unlocked (from https://docs.google.com/spreadsheets/d/1ZaiJ3F_f76sVa4daU5H62OYi5Bj23LEBBv4xDTQ8y-M/pubhtml).
Doesn't seem to boot.
Also if I go into TWRP I get a red message saying "Failed to mount '/carrier' (Invalid Argument)
What FW should I be on? How long is initial boot usually?
THanks!!

[ROM][11.0] LineageOS 18.1 for Redmi Note 9/Redmi 10X 4G[UNOFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community-built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's working :
Audio
Bluetooth
Camera
EGL
GPS
RIL (Calls, SMS, Data)
Sensors
Video Playback
Wi-Fi
MTP
VoLTE
Everything is Working Except following Bugs
Known issues/Bugs :
VoWiFi
You tell me the rest
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed any root implementation
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless). Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Instructions
Flash MIUI 12.0.1 ID or 12.0.2/12.0.3 Global in fast boot.
Install custom recovery.
Download the latest LineageOS build.
Wipe Data, Dalvik, Internal, Cache
Flash the ROM
Format data
Reboot
Note
For people who wish to use GApps, use MagiskGApps by @Wacko1805 ,
OR
MindTheGApps
Downloads
Download ROM
Download MagiskGApps
Credits
LineageOS Team
@SparXFusion
@whyredFire
@Pulkit Agarwal
@henloboii
@TechyMinati
& All People Who helped me in a way or Other !
Source Code
ROM: https://github.com/LineageOS
Device Tree: https://github.com/Redmi-MT6768/android_device_xiaomi_merlin
Kernel Source: https://github.com/Redmi-MT6768/android_kernel_xiaomi_mt6768
Build Author: Communos
If you liked my work, press thanks on this thread !
pro god communos
pro af
pruh sar
damn sir, great work. Kudos.
Good work
thanks
So pro
Can i update lineage os 17.1 to 18.1 without losing anything? And what about OTAs? Once you release new updates will we be able to install them without starting over again?
Good question
riccardosimo said:
Can i update lineage os 17.1 to 18.1 without losing anything? And what about OTAs? Once you release new updates will we be able to install them without starting over again?
Click to expand...
Click to collapse
You'll have to format data and then flash 18.1 buld, also no OTA updates yet, it's still unoffcial :/
pro god communos
Good work communos
thinking of going official?
DavitidzeSh said:
thinking of going official?
Click to expand...
Click to collapse
Nah not yet, gotta try enforcing build.
Is encryption working?
Great ROM, nice performance!
What I've notice:
- Volume buttons from headsets not working
Another issue it has, it's something that happens in all LOS ROMs published in this same forum for merlin and its that when you are listening any Whatsapp Voice Note through earphones, bluetooth or loudspeaker and screen turns off or you change main app and move Whatsapp to background, audio starts cracking.
awesome...
covecove1 said:
Is encryption working?
Click to expand...
Click to collapse
I haven't tried so dk ;/ give it a try?
ma259 said:
Great ROM, nice performance!
What I've notice:
- Volume buttons from headsets not working
Another issue it has, it's something that happens in all LOS ROMs published in this same forum for merlin and its that when you are listening any Whatsapp Voice Note through earphones, bluetooth or loudspeaker and screen turns off or you change main app and move Whatsapp to background, audio starts cracking.
Click to expand...
Click to collapse
Hey, I just tested the whatsapp audio issue, it's working fine for me, just ensure the sensors are not covered, and I tried changing volume from my bluetooth headphones, worked fine too.
I've attached the picture of showing sensor location for you. Is it wired headsets that you talk of?

Categories

Resources