Related
Hey all, i thought i would start a thread about an issue that many canadians seem to have with the GS2, it seems to have been beat to death but there is no actual solution.
Im currently using the GS2 with Telus, its a wcdma/3G/H/H+ carrier using the frequency 1900 mostly and 850 at times on the cdma network, i used so far KG3-KG6 i placed them in that order because KG6 is the latest i tried and has proven to give me better coverage but its still really bad..
I can connect to data but only outdoors or only when the reception is full bars, if i start to lose any bars there goes my data connection and i can no longuer use any services data/sms/mms/calls i literaly cant do anything..
This is a big issue as i know for a fact that you dont need a data connection to send sms. but it seems the galaxy s2 under the current modem firmware im using KG6 wont allow me to unless im on full data coverage...
My question is this, what is the best modem firmware to use according to the frequencies that i meantioned earlier 1900/850 WCDMA i dont mind using another country's modem as long as they are oriented towards the same frequencies that i need
My phone came from Korea and i know they use 2100/900 could that be the issue? Is my hardware oriented towards that? At this point anything could help and please feel free to post thanks
SL.
What is the model # of your phone?
Sent from my GT-I9100M using XDA App
GT-I9100 thats my model
im using
PDA: I9100XXKG6
PHONE: I9100XXKG6
CSC: I91000XAKG6
Hmm, I'm a SGS2 owner on TELUS as well and haven't had any problems so far, besides the GPS Lock Time which most people seem to complain about. It takes about 1 minute for the GPS to lock for me, but my data is fine. No dropped calls or sms problems here. My download speed as I checked last was at 8.31 Mbps down and about 2 Mbps up.
But again, having horrible GPS issues. Wish I could figure that one out
Sobai can u post your results to *#1234#
so i can compare my settings to yours.
I'm using KG6 on Rogers network and don't have fantastic reception either. For most situations it holds calls -- but buildings with lots of concrete I lose the signal completely. It's as if I'm not truly on the 850 band ... my G1 had the same problem until I flashed a Bell-specific modem, that solved the problem. I guess we'll have to wait until Bell launches the G2 here, we'll be able to swipe the modem again.
i have an imported gs2 that i am using on rogers and it doesnt drop calls, but i have had times in the past when it would show 3g but not download any data. once i turned airplane mode on and off data would work fine again. the best radio for me has been the kf2 modem in terms of not having the data stalling issue. i find that even if i show no bars of strength i can still download data with no issue.
if you are on telus i would make sure so set the wireless settings to 3g only so the phone doesnt try to look for a 2g signal.
KG2 on a Bell SGS2 on Rogers/Fido network in Vancouver.
GPS locks in seconds. no dropped calls. H+ all the time, never once saw a 3G symbol. no data dropouts.
over 7Mbps down on this network with the SGS2, when i had 1/3rd the speeds an HTC Desire. great reception in my office downtown, my apartment, everywhere i've been so far.
KG2 (not the stock canadian though), in Montreal on the Virgin/Bell network. So far no complaints on the data. Since I started messing w/ the firmware however, the connection is on 3G when idle and only switches to H+ when actually in use. From what i've been reading many people have been noticing this when flashing over the stock Canadian firmware.
On the other hand however, the GPS has been having a hard time establishing a lock (whereas it used to be quite speedy and precise before I flashed). Won`t be able to test whether this is a firmware problem untill the stock Canadian is released by Samsung.
PDA: I9100XXKG6
PHONE: I9100XXKG2
CSC: I9100OXAKG6
Sent from my GT-I9100 using XDA App
Wow guys I appreciate the feedback I thought I was the only one with this issue! I will definitely give kf2 a try right now and I'll also download the 3G only data app and give it a try and I'll get back to u guys with some feedback. Thanks again
Btw I'm using, touch x 3.2 rom that has kg5 on and I did notice a little improvement in the reception but the data connectivity is still very spotty so I'll give kf2 a try but so far kg5 modem is definitely the best one I seen so far to use on telus. Btw anyone trying to use the galaxy s2 on fido, I was never able to get 3G at all to work I was stuck on edge.
hondaguy said:
i have an imported gs2 that i am using on rogers and it doesnt drop calls, but i have had times in the past when it would show 3g but not download any data. once i turned airplane mode on and off data would work fine again. the best radio for me has been the kf2 modem in terms of not having the data stalling issue. i find that even if i show no bars of strength i can still download data with no issue.
if you are on telus i would make sure so set the wireless settings to 3g only so the phone doesnt try to look for a 2g signal.
Click to expand...
Click to collapse
Do you know how I would be able to set it up so that it stays locked on 3G? I tried the *#301279# trick and disabling hsdpa and hsupa with revision 99 but to no avail. Even if it shows full bars and 3G I still get no data connection and also I can't send or receive texts unless there is a data connection for some reason, have you guys had this issue??
sashpimp said:
Do you know how I would be able to set it up so that it stays locked on 3G? I tried the *#301279# trick and disabling hsdpa and hsupa with revision 99 but to no avail. Even if it shows full bars and 3G I still get no data connection and also I can't send or receive texts unless there is a data connection for some reason, have you guys had this issue??
Click to expand...
Click to collapse
i have never needed to mess around with that menu. you should be able to go to
settings
wireless network
mobile networks
network mode
select wcdma only
that will lock it to 3 only. if you keep having issues you might get a new sim card from telus as that might be causing you some issues
Do you have your apn configured properly for your provider? If it isnt your data definitely work. Other then that I havent had these issues in edmonton on kg6 or maybe I just dont know what to expect reception wise. I do notice it hops from 3G to hspa to hspa+ a lot so i switched to only 3g. If anyone finds anything that improves that or reception though I would be interested
Sobai said:
Hmm, I'm a SGS2 owner on TELUS as well and haven't had any problems so far, besides the GPS Lock Time which most people seem to complain about. It takes about 1 minute for the GPS to lock for me, but my data is fine. No dropped calls or sms problems here. My download speed as I checked last was at 8.31 Mbps down and about 2 Mbps up.
But again, having horrible GPS issues. Wish I could figure that one out
Click to expand...
Click to collapse
Can u post what Rom u are currently using and modem ?
sashpimp said:
Can u post what Rom u are currently using and modem ?
Click to expand...
Click to collapse
This information would be great because I am also experiencing spotty data connectivity (browser loads data, stalls, resumes centuries later) which results in severe crappy data speeds of 0.8mbps down and 0.07mbps up (done on in-browser speakeasy test and speedtest.net app.
Running VillianRom 2.4.2 on Bell's I9100M over Telus Network
PDA: I9100XXKG6
PHONE: I9100XXKG3
CSC: I9100OXAKG6
nk_blu said:
This information would be great because I am also experiencing spotty data connectivity (browser loads data, stalls, resumes centuries later) which results in severe crappy data speeds of 0.8mbps down and 0.07mbps up (done on in-browser speakeasy test and speedtest.net app.
Running VillianRom 2.4.2 on Bell's I9100M over Telus Network
PDA: I9100XXKG6
PHONE: I9100XXKG3
CSC: I9100OXAKG6
Click to expand...
Click to collapse
I wish there was a way to extract the modem.bin file from the bell sgs2 this way we could simply distibute it around. Someone should root their phone, install cwm4 and make a backup and we could simply pass the backup around so we could all have the modem
Bell modem has already been posted to the forum.
sashpimp said:
I wish there was a way to extract the modem.bin file from the bell sgs2 this way we could simply distibute it around. Someone should root their phone, install cwm4 and make a backup and we could simply pass the backup around so we could all have the modem
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA Premium App
Or flash KG6, KH1, whichever modem you please.
Sent from my GT-I9100 using XDA Premium App
Could anyone tell me what is the speed of Photon on GSM data network, is it 7.2, 14.4, 21 MBps??
I have been looking for several hours now. Planning to get this phone as a GSM device for about $300
Also, does the Mobile Hotspot work on GSM 3G?
Thanks a lot.
is it 7.2 .
ok, thank you.
Thant is not too speedy, but good enough.
I am able to tether using GSM. FYI I am running Alien Rom, and although the rom works pretty well I don't get any signal bar indication on GSM. I do get a signal and data, just no bars showing in the notification.
Strating a new topic to figure out which radio works better on T-Mobile for AT&T JB update.
Before JB update, like several other people on this forum, I have been using i717 on T-Mobile network . 4G has been working fine with GT-N7005-IMM76D-DXLJ2 Rom and UVLG3modemfori717_gt-n7005amss radio.
1. UVLG3 modem with GT7005 amss gives no signal.
2. UVLG3 modem with JB amss gives no signal.
3. Stock radio and amss in JB update only connects to Edge. (unless you are in area where T-Mobile has 3g on 1900?)
4. Blaze ICS modem connects to 4g but signal bars are not shown in status bar.
For the best modem so far, check the below post...
http://forum.xda-developers.com/showthread.php?p=41052527
If anybody else tried any other combinations, please post your experience in this thread.
Thanks.
same here plus i try it with Telus modems too not signal (signal comes and gone)
I made my own combo for WIND in Canada (confirmed to work on T-Mobile with much higher speeds). It's really slow (about 1 Mbps down and 50 kbps up) but at least it works (good voice/signal strength and somewhat usable data)
It's the SGH-T989D (Telus Galaxy S II X) latest modem (TLMC4) and AMSS from the old Blaze modem posted around this forum. Just flash it with CWM.
http://speedy.sh/uyHBp/SGH-T989D-TLMC4-amss-from-blaze.zip
Steps:
1. Flash in CWM
2. On reboot, do a network scan
3. Open dialer, dial *#2263# and select WCDMA Prefs -> WCDMA 1700
4. Do network scan again, WIND (or whatever your AWS provider is) should appear. Select it and it should register.
5. You can multi task back to the service mode and go back and select "[1] Automatic" to use all bands again.
No responsibility if it bricks your phone, it works on my SGH-i717R without issues
OT: I also tried SGH-T989D_TLMC4_radio.zip and it works on Bell/Telus/Rogers without any mods. However, trying any T989 combos never really worked (some did, but data kept dropping).
windroidHD said:
Strating a new topic to figure out which radio works better on T-Mobile for AT&T JB update.
Before JB update, like several other people on this forum, I have been using i717 on T-Mobile network . 4G has been working fine with GT-N7005-IMM76D-DXLJ2 Rom and UVLG3modemfori717_gt-n7005amss radio.
1. UVLG3 modem with GT7005 amss gives no signal.
2. UVLG3 modem with JB amss gives no signal.
3. Stock radio and amss in JB update only connects to Edge. (unless you are in area where T-Mobile has 4g on 1900?)
4. Blaze ICS mpdem connects to 4g but signal bars are not shown in status bar.
If anybody else tried any other combinations, please post your experience in this thread.
Thanks.
Sent from here.
Click to expand...
Click to collapse
This is an important thread for this forum. I'm in the same situation, utilizing the AT&T rom on an AT&T device, and trying to use it on T-Mobile.
My experience has been strange. I am using the stock firmware radio with the AT&T JB update, and I seem to connect to 4G randomly on T-Mobile, switching between UMTS:3 and HSPAP15. I am usually on Edge more often than "4G". I don't have LTE in my area, and "3G" on 1900 doesn't work on my Wife's Iphone.
I tried the UVLG3 Modem for i717, and got no signal at all.
I haven't tried the Blaze modem. What I want to know, is what is the experience with Blaze when you look at system status? UMTS:3? HSPAP?
I am on stock modem in JB rom right now, shows UMTS3 in status.
Nothing strange about that, it is in UMTS when data is idle, anything else is when data is active.
You only get 3G on T-Mobile if its a "re-farmed" 1900 MHz region, where they moved 3G from AWS to 1900 MHz. If you go outside your zone you will only have 2G.
zivan56 said:
Nothing strange about that, it is in UMTS when data is idle, anything else is when data is active.
You only get 3G on T-Mobile if its a "re-farmed" 1900 MHz region, where they moved 3G from AWS to 1900 MHz. If you go outside your zone you will only have 2G.
Click to expand...
Click to collapse
What is HSPAP:15 considered? HSPA 15Mbps? Is that at 1700MHz or 1900Mhz?
crazeco said:
What is HSPAP:15 considered? HSPA 15Mbps? Is that at 1700MHz or 1900Mhz?
Click to expand...
Click to collapse
You would have to go to field test mode to find out, Android does not have such details. Dial *#0011# and find at the very top "RRC: .. BandX," where X is a number. Is it 4 (AWS) or 2 (1900Mhz)?
There may be an item (radio dependant) called DC_HSPA to indicate whether its dual cell HSPA(+). Post a screenshot and I can check it for you.
zivan56 said:
I made my own combo for WIND in Canada. It's really slow (about 1 Mbps down and 50 kbps up) but at least it works (good voice/signal strength and somewhat usable data)
It's the Blaze 4G latest modem (T769-UVMB1) and AMSS from the old Blaze modem posted around this forum. Just flash it with CWM.
http://www.speedyshare.com/YTNEb/T769-UVMB1-amss-from-blaze.zip
Steps:
1. Flash in CWM
2. On reboot, do a network scan
3. Open dialer, dial *#2263# and select WCDMA Prefs -> WCDMA 1700
4. Do network scan again, WIND (or whatever your AWS provider is) should appear. Select it and it should register.
5. You can multi task back to the service mode and go back and select
No responsibility if it bricks your phone, it works on my SGH-i717R without issues
OT: I also tried SGH-T989D_TLMC4_radio.zip and it works on Bell/Telus/Rogers without any mods. However, trying any T989 combos never really worked (some did, but data kept dropping).
Click to expand...
Click to collapse
With the T989D_TLMC4_radio i got the most sickiest DL ever on CM 10.1 but cant make calls only data and text did you think can modify to work on TMO.
BTW right now o using Telus TELL4 modem and work amazing
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Mervingio said:
With the T989D_TLMC4_radio i got the most sickiest DL ever on CM 10.1 but cant make calls only data and text did you think can modify to work on TMO.
BTW right now o using Telus TELL4 modem and work amazing
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Hmm, can you try this. I've tested it a bit on WIND and data/voice works...the data is slighly more stable/faster (still around 1.5 Mbps/50 Kbps for me)
http://speedy.sh/uyHBp/SGH-T989D-TLMC4-amss-from-blaze.zip
IT works for me on WIND, so it should work on T-Mobile. Same steps as in my previous post above to get it to see AWS carriers. If your T-Mobile service is 1900 MHz, it may just work without any of those steps.
Btw, for some reason it only sees WIND (the modem is non WIND specific) and no other AWS carriers (i.e Mobilicity) when set to WCDMA 1700. No idea why.
I
zivan56 said:
Hmm, can you try this. I've tested it a bit on WIND and data/voice works...the data is slighly more stable/faster (still around 1.5 Mbps/50 Kbps for me)
http://speedy.sh/uyHBp/SGH-T989D-TLMC4-amss-from-blaze.zip
IT works for me on WIND, so it should work on T-Mobile. Same steps as in my previous post above to get it to see AWS carriers. If your T-Mobile service is 1900 MHz, it may just work without any of those steps.
Btw, for some reason it only sees WIND (the modem is non WIND specific) and no other AWS carriers (i.e Mobilicity) when set to WCDMA 1700. No idea why.
Click to expand...
Click to collapse
Tried it, signal strength went from 2 bars with stock modem to 4 bars, status shows UMTS3 when idle and switches to HSPAP:15 briefly.
Speed test
outside the house 7000kbps/1000kbps
Inside the house 1650kbps/66kbps
*#0011# shows rrc band 4, previously it was band 2.
*#2263# doesn't shows any item with * infront, previously automatic had * infront of it.
Tried setting wcdma to 1700 and saw the same performance, rrc band4 and switching between umts3 and hspap:15.
Havn't tested call quality but this has been the best modem so far.
Thanks for sharing.
zivan56 said:
Hmm, can you try this. I've tested it a bit on WIND and data/voice works...the data is slighly more stable/faster (still around 1.5 Mbps/50 Kbps for me)
http://speedy.sh/uyHBp/SGH-T989D-TLMC4-amss-from-blaze.zip
IT works for me on WIND, so it should work on T-Mobile. Same steps as in my previous post above to get it to see AWS carriers. If your T-Mobile service is 1900 MHz, it may just work without any of those steps.
Btw, for some reason it only sees WIND (the modem is non WIND specific) and no other AWS carriers (i.e Mobilicity) when set to WCDMA 1700. No idea why.
Click to expand...
Click to collapse
not sure why but with this ROM (jelly bean) i can lock DC-HSPA8+ and damn it go fast!!!!
this pics are with your modem i will test later today when i go to the mall now works perfect!
Thanks for the help
zivan56 said:
You would have to go to field test mode to find out, Android does not have such details. Dial *#0011# and find at the very top "RRC: .. BandX," where X is a number. Is it 4 (AWS) or 2 (1900Mhz)?
There may be an item (radio dependant) called DC_HSPA to indicate whether its dual cell HSPA(+). Post a screenshot and I can check it for you.
Click to expand...
Click to collapse
I'm now using the Blaze radios posted by Zivan in the link above. I'm getting Band 4 CPCH and FCPH and DCH. Averaging around 3-6Mbps down and 300Kbps up.
crazeco said:
I'm now using the Blaze radios posted by Zivan in the link above. I'm getting Band 4 CPCH and FCPH and DCH. Averaging around 3-6Mbps down and 300Kbps up.
Click to expand...
Click to collapse
Great!!
Mervingio said:
Great!!
Click to expand...
Click to collapse
To be honest, I'm getting better T-Mobile 4g reception with that modified Blaze radio on JB than I did on ICS with UVLG3. Not going to complain!
Anybody managed to get LTE with a JB rom yet?
Question ?.........I picked wcdma 1700 and I'm getting crazy good speeds ....9down 2up..sometimes better What is safe cpu temps? Cause I think it may be heating up
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Wow, good to hear folks...I'm getting rather terrible speeds on WIND. But the phone works, I did a bunch of calling/texting/data usage and its been stable for over a day.
Well I had to reflash for some reason it was picking up excellent speeds then poof gone .. tried changing back to 1900... nothing .. so I reflashed and just picked automatic
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Hi everyone,
I'm new to the Note, but definitely not new to Android or XDA.
I've got the phone "unlocked" via the radio trick here: http://str8pt.blogspot.com/2013/06/unlock-simfree-method-for-galaxy-note.html
I've rooted it, and have tried a few different ROMs with different radios.
The Blaze radio (and others) I mention are from here: http://forum.xda-developers.com/showthread.php?t=1679722
I am in Melbourne, FL in case location makes any difference.
Here's what I am seeing:
CyanogenMOD 10.1.3 - using Blaze ICS radio I am getting only EDGE speeds. Using "Official TMO ICS Radio" (I'm guessing it's the one from the TMO Note?) , I get NO connectivity.
Stock 4.1.2 - using Blaze ICS radio I am getting 4G, however the signal meter is totally empty as if there's just enough signal to register connectivity but not enough to register a single bar. Download speeds are abysmal in comparison to other TMO phones I've used here - I am seeing downloads at around 1.5MB - other phones are 6, 7, even 8 MB.
My question are as follows:
Using CyanogenMod, should I be using the i717 version? Or the TMO Note version? Is there anything I can do with ANY particular radio to get better than EDGE?
Using the Stock ROM (or a variant), is there are a way to get the signal cluster to function properly? Any way to get better download speeds?
I read that the TMO 4.0.4 stock ROM image can be installed via ODIN and apparently it works correctly (if I am reading correctly) - would the TMO 4.1.2 stock ROM image be installed via ODIN and work as well? (If I can even find a full download of it?)
Should I expect to have to re-flash the radio each time with each ROM? From what I've seen, if I don't, I lose any ability to get 4G until I flash it again. I'd be stuck on EDGE.
Thanks so much guys! I've searched and read till my eyes are crossing and not finding the answers I need. I hope that with the experience that can be found in this forum maybe I can get where I need to be!
Thanks again!
JWhipple said:
Hi everyone,
I'm new to the Note, but definitely not new to Android or XDA.
I've got the phone "unlocked" via the radio trick here: http://str8pt.blogspot.com/2013/06/unlock-simfree-method-for-galaxy-note.html
I've rooted it, and have tried a few different ROMs with different radios.
The Blaze radio (and others) I mention are from here: http://forum.xda-developers.com/showthread.php?t=1679722
I am in Melbourne, FL in case location makes any difference.
Here's what I am seeing:
CyanogenMOD 10.1.3 - using Blaze ICS radio I am getting only EDGE speeds. Using "Official TMO ICS Radio" (I'm guessing it's the one from the TMO Note?) , I get NO connectivity.
Stock 4.1.2 - using Blaze ICS radio I am getting 4G, however the signal meter is totally empty as if there's just enough signal to register connectivity but not enough to register a single bar. Download speeds are abysmal in comparison to other TMO phones I've used here - I am seeing downloads at around 1.5MB - other phones are 6, 7, even 8 MB.
My question are as follows:
Using CyanogenMod, should I be using the i717 version? Or the TMO Note version? Is there anything I can do with ANY particular radio to get better than EDGE?
Using the Stock ROM (or a variant), is there are a way to get the signal cluster to function properly? Any way to get better download speeds?
I read that the TMO 4.0.4 stock ROM image can be installed via ODIN and apparently it works correctly (if I am reading correctly) - would the TMO 4.1.2 stock ROM image be installed via ODIN and work as well? (If I can even find a full download of it?)
Should I expect to have to re-flash the radio each time with each ROM? From what I've seen, if I don't, I lose any ability to get 4G until I flash it again. I'd be stuck on EDGE.
Thanks so much guys! I've searched and read till my eyes are crossing and not finding the answers I need. I hope that with the experience that can be found in this forum maybe I can get where I need to be!
Thanks again!
Click to expand...
Click to collapse
I recently obtained an I717 too, unlocked it, and got it functioning with my tmobile prepaid plan. I'm still on gingerbread rom and using KID radio with decent success. just 4G , using WCDMA band 1700 (*#2263#). I get consistent decent speeds but not LTE.
The hands down best modem to use is UCMB4 - Google it. But it can cause problems with some jelly bean ROMs.
If you want jb more than anything, play with modems. If you want speed AND stability, go jellybean sandwich or black star X with the aforementioned modem.
If you want WiFi calling download skeleton key.
Ucmb4 with any of those three and the proper APN will get you LTE as fast as it's offered in your area
Anthony820 said:
The hands down best modem to use is UCMB4 - Google it. But it can cause problems with some jelly bean ROMs.
If you want jb more than anything, play with modems. If you want speed AND stability, go jellybean sandwich or black star X with the aforementioned modem.
If you want WiFi calling download skeleton key.
Ucmb4 with any of those three and the proper APN will get you LTE as fast as it's offered in your area
Click to expand...
Click to collapse
Hi Anthony820,
I'm currently running your Skeleton Key ROM - not bad at all! But definitely want to try to get CyanogenMod or PACman JB running.
I'll give the UCMB4 radio a shot this evening !
When I had service with TMO (via Straight Talk) I had the best luck with UVLG3.
jman315 said:
When I had service with TMO (via Straight Talk) I had the best luck with UVLG3.
Click to expand...
Click to collapse
Using which ROM?
I've got CM 10.1.3 for i717 installed right now, going through and testing each and will post results.
JWhipple said:
Using which ROM?
Click to expand...
Click to collapse
At the time I was running CM 10.1 nightlies.
Uvlg3, if I recall, will get you good down speed, but mediocre up. Otherwise, it's a solid choice and may be more cooperative with jb builds.
Sent from my SM-N900T using xda app-developers app
Anthony820 said:
Uvlg3, if I recall, will get you good down speed, but mediocre up. Otherwise, it's a solid choice and may be more cooperative with jb builds.
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Looks like you're right - here's just 4 radios that I just tested:
UCMB4 - EDGE only
UVLG3 - 3G/DC(WTF??)/H+ 6.01Mbps up/1.07 Mbps down
UVLE1 - Phone freezes, locks on black screen, had to pull battery
ICSBLAZE - 3G/DC/H+ Network communication issues message when running speedtest.
By the way, what the heck is "DC" on the network indicator where 3G or H/H+ normally is? I've never seen that before!
JWhipple said:
Looks like you're right - here's just 4 radios that I just tested:
UCMB4 - EDGE only
UVLG3 - 3G/DC(WTF??)/H+ 6.01Mbps up/1.07 Mbps down
UVLE1 - Phone freezes, locks on black screen, had to pull battery
ICSBLAZE - 3G/DC/H+ Network communication issues message when running speedtest.
By the way, what the heck is "DC" on the network indicator where 3G or H/H+ normally is? I've never seen that before!
Click to expand...
Click to collapse
I believe It stands for dual channel.
By the way, just checked and CM's WiFi tethering is working as well - nice!
Not sure what I did differently this time but this evening the signal indicator is showing real signal strength, equivalent to what I was seeing on another phone on CM.
JWhipple said:
By the way, just checked and CM's WiFi tethering is working as well - nice!
Not sure what I did differently this time but this evening the signal indicator is showing real signal strength, equivalent to what I was seeing on another phone on CM.
Click to expand...
Click to collapse
Good to hear. I believe not seeing any signal strength is a known issue specifically with the Blaze modem.
Make sure you're changing your APN from epc.* to fast.t-mobile.com
Sent from my SM-N900T using xda app-developers app
Anthony820 said:
Make sure you're changing your APN from epc.* to fast.t-mobile.com
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
I'm guessing that would get me LTE if it's available in my area?
I just switched over to it and only got EDGE...
JWhipple said:
I'm guessing that would get me LTE if it's available in my area?
I just switched over to it and only got EDGE...
Click to expand...
Click to collapse
If you're on a modem that'll work with LTE, yep. Otherwise HSPA or Edge.
Make sure, I forget and my Note no longer has service, that the top option is set under Network Type or whatever it is. Network Mode? I don't know, you'll figure it out. The thing that lets you pick between GSM, WCDMA etc..etc..
Anthony820 said:
If you're on a modem that'll work with LTE, yep. Otherwise HSPA or Edge.
Make sure, I forget and my Note no longer has service, that the top option is set under Network Type or whatever it is. Network Mode? I don't know, you'll figure it out. The thing that lets you pick between GSM, WCDMA etc..etc..
Click to expand...
Click to collapse
Ok, I got it figured out. I am on the FAST APN and set to WCDMA/LTE . I'm on 3G/H+ here in the house now - will see how it goes when I head out tomorrow.
Either way, I think it's time to make a backup - it's running marvelously and doing everything I would expect it to!
NOTE: Newest PAC ROM (4.3) running smoothly with UVLG3 modem on T-Mobile without issue
[EDIT]
Scratch that - it worked great until I did the first reboot - then it wouldn't boot up again, even with a battery pull.
JWhipple said:
Ok, I got it figured out. I am on the FAST APN and set to WCDMA/LTE . I'm on 3G/H+ here in the house now - will see how it goes when I head out tomorrow.
Either way, I think it's time to make a backup - it's running marvelously and doing everything I would expect it to!
Click to expand...
Click to collapse
I went ahead and flashed UCMB4 and was showing 4g lte after reboot. my phone info setting says WCDMA preferred (it shows no LTE option at all ) and the *#2263# menu setting says "automatic". on the fast.t-mobile.com apn
I use UCMD3 and get LTE almost everywhere. Hellybean is a pretty good ROM, try it out!
On my*T-Mobile*$30 5gig prepaid SIM I was getting 4gLTE data speeds of around 30gb down. Problem is im only getting those speeds on any Aosp/Cm rom. Whenever I try Verizon's stock rom I get nothing, I've tried every combination of apn/preferred network type including global. I know my vs985 has the correct bands for T-Mobile 4gLTE in my area because I have very fast speeds on Aosp/Cm.
I really want LG's stock camera app that's why I want to go back to a stock rom. Maybe I'm missing something but I just can't figure this out.
Also I'm OK with using any rom as long as is has a working LG stock camera app.
Thanx
Blakroc said:
On my*T-Mobile*$30 5gig prepaid SIM I was getting 4gLTE data speeds of around 30gb down. Problem is im only getting those speeds on any Aosp/Cm rom. Whenever I try Verizon's stock rom I get nothing, I've tried every combination of apn/preferred network type including global. I know my vs985 has the correct bands for T-Mobile 4gLTE in my area because I have very fast speeds on Aosp/Cm.
I really want LG's stock camera app that's why I want to go back to a stock rom. Maybe I'm missing something but I just can't figure this out.
Also I'm OK with using any rom as long as is has a working LG stock camera app.
Thanx
Click to expand...
Click to collapse
Was a manager at T-mobile and never had a Verizon phone on stock firmware capable of regular T-Mobile data speeds. Most only got hspa+
Blakroc said:
On my*T-Mobile*$30 5gig prepaid SIM I was getting 4gLTE data speeds of around 30gb down. Problem is im only getting those speeds on any Aosp/Cm rom. Whenever I try Verizon's stock rom I get nothing, I've tried every combination of apn/preferred network type including global. I know my vs985 has the correct bands for T-Mobile 4gLTE in my area because I have very fast speeds on Aosp/Cm.
I really want LG's stock camera app that's why I want to go back to a stock rom. Maybe I'm missing something but I just can't figure this out.
Also I'm OK with using any rom as long as is has a working LG stock camera app.
Thanx
Click to expand...
Click to collapse
Some error in your setup.
On my stock vs985 I get T-Mobile band4 LTE no problem. Not band2 LTE, not supported, but no problem with band4 at all, or slower T-Mobile speeds where necessary.
T-Mobile just enabled band4 LTE down on the NC coast, too, which was a nice surprise. It used to be only Edge here.
I have the same T-Mobile pre-paid 5gig sim as you are using. Configuration error must be causing your problem ?
Sent from my VS985 4G using Tapatalk