Related
Hi everyone, i am new at this forum and android devices, i searched for 2 days but cannot find exact answers for my problem
I bought an iphone 4s clone which the seller said that name is Gooapple V5 3G, android 2.3.5 is installed on it, but when i installed antutu benchmark and look at the system info, it is written:
Phone Model:
Parrot
Brand:
Mediatek
CPU Hardware:
MT6573
CPU Model:
ARMv6 Processor
CPU Frequency:
634.06 MHz
Screen Resolution:
320x480
......
Android Version:
2.3.5
Build Number:
ALPS.GB.FDD2.MP.V3.9
Kernel:
Linux version 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) #1 PREEMPT Thu Jun 28 14:01:43 CST 2012
and when i push '-' and power button together first Mediatek appears and after choosing version:
BB Chip: MT6573
MS Board. : lightning73_gg
Modem Ver. : MAUI.11AMD.W11.37.SP.V2, 2011/10/14 02.55
UBoot Ver. : 2010.06
......
is written.
First of all i am looking a rom which is android 4 for this phone. I searched for that and i saw that there are some phones with android 4.0 which has the MT6573 cpu. Do you know are there any rom like this which i can install on it? Are gooapple v5 3g roms compatible to this phone?
Also i installed the usb drivers for this phone and rooted the device, but i cant reach the sd card from pc, in my computer there occurs a removable device but not accesible. What is the solution of this?
Thanks
first of all, there are no mt6573 based smartphones out there, running android 4.0 . maybe someone is porting ICS to the mt6573, but right now i can not find 4.0 for it. there are phones put there with faked Android version, such as 4.0.9 or something.
yes, you can install different Roms on your device, but you have to port them first.
I have no answer for your question, maybe the SD card has a switch for read only?
i used wrong rom and lost the system of the device, now i need correct rom, is there anyone who has correct rom of this?
http://forum.xda-developers.com/showthread.php?p=28811045
you should take a look in this thread..
Chrizzly92 said:
http://forum.xda-developers.com/showthread.php?p=28811045
you should take a look in this thread..
Click to expand...
Click to collapse
i know this but this device is not gooapple
ahh sorry, my fault. i just flight over your post, it was late. mybe some aditional informaton ( pictures of the phone, the back, the back without battery...
those version numbers or names can be faked easily, it is hard to say what phone you have with the given information. greets, chris
you have to reflash your stock firmware.
i found the rom that works correct but i dont like ios interface on it. now i m looking for a rom which has android interface
use this tool to backup your current working firmware:
http://forum.xda-developers.com/showthread.php?t=1683883
and upload your Rom somewhere ( i only need boot.img and system.img ). I'm interested in the IOS interface and i can port almost all available mt6573 ROM's to your device.
I am currently working on a custom Rom with Cyanogenmod Settings,DSP manager, ICS themed , ext2 support and much more.
if you are interested, i can make you a flashable zipfile.
w w w.4shared-china.com/rar/GyMPoJuc/mt6375-236gps_backup.html
this is the rom i m using on my phone, all .img files in it
i dont like ios interface because it has lots of differences from real ios interface, text characters, icons, menus have lots of mistakes
and also roms for this device work too slow, is it possible to make lite and android gui custom rom for this device?
look at the pictures in my last post, this is a custom ROM made by me. the Mt6573 isn't that fast, but i tried to make a fast ROM for it.
it is working pretty fast right now, no chinese apps and a lot of customization you can do . there are a lot of ROM's out there, some are good, some are pretty bad. like i said, i can make a flashable zip for your device, so you can try out my ROM.
i can try if you can make a zip for me, this would really help me
also i have another problem with the rom which i gave the link of it, the network problem
if the gsm signal become too low, restricted access changed - voice service blocked error occurs, in my home and office signal is too low so i cant use the phone, do you know any solution for this?
i will make one asap, maybe your networking problems are gone with my ROM. im from Germany, have no problems here with the signal at all.
maybe your smartphone is just ****ed up, we will see later.
you got these problem too, before you got the new ROM? maybe the Baseband drivers are wrong or something...
Press VOL + and power toegether, what Recovery shows up? a standart mediatek one or do you already have a custom recovery?
i didnt use the phone with sim card before this rom so i dont know
recovery screen is standard mediatek
there you go! this is a clockworkmod recovery for your phone. just flash it with Flashtool and try it out! flashing a new rom becomes pretty easy with it. hope it will work, give me a quick response if it isn't working.
edit:
some minor tips: dont flash the preloader in any case, this could damage your phone, if it is the wrong one!!!
and always make a backup of the existing images!
i flashed with flashtool and didnt flashed preloader, dsp_bl, changed the recovery.img with the one you gave, nothing changed same ios gui, did i do something wrong?
do you have whole new rom for this device which includes all the image files in it? the one i shared here is too slow and some problems
the file i given you is ONLY the recovery, after flashing try it out with phone off and hold VOL+ and POWER, the recovery screen shows up with clockworkmod recovery.
the fully rom ( including boot.img and system.img) needs more work, i haven't the time to do it yet. just give me a day for it. porting a Rom to a diffrent screenresolution needs more work, cause my device is 480x800 pixels, yours only 320x480. i have to say, there can be some failures because of the different resolution, but this can be fixed easily.
the custom recovery i gave you is necessary for flashing new roms easily.
I am planning to buy one of these tablets to tinker with. After some searching, I found the following rom alternatives:
http://www.arctablet.com/blog/forum...-firmware-version-1-04-test-version-20130723/
http://www.slatedroid.com/topic/91121-tempestu39gt-roms-v0001/
http://www.slatedroid.com/topic/89434-custom-firmware-from-4pda-based-on-stock-104/
Do you know of any other worthwhile rom to try out, or are these three all that's available?
Anyone?
Kollagen said:
Anyone?
Click to expand...
Click to collapse
thanks for sharing, gonna try the TempestU39GT
There's also 1.05 multiwindow rom that some say is better than stock 1.04, download is here :
rom
Do not buy the Cube U39GT-3G version of this tablet, I ordered one from http://www.cube-tablet.com and it came with a wrong IMEI number. I cannot use any SIM data card because of this with this tablet.
I bought the Wifi version, so I am not in danger. Thanks for the warning though, it certainly speaks of extremely crappy QA.
racht: anytime, and thank you for the link to 1.5.
It seems like another rom might be on the works:
http://www.freaktab.com/showthread.php?8204-Are-there-any-worthwhile-roms-for-the-Cube-U39GT
Apparently it will be based on stock 1.04 instead of 1.05, but if it comes to completion it might be worth it to try it out.
Kollagen said:
It seems like another rom might be on the works:
http://www.freaktab.com/showthread.php?8204-Are-there-any-worthwhile-roms-for-the-Cube-U39GT
Apparently it will be based on stock 1.04 instead of 1.05, but if it comes to completion it might be worth it to try it out.
Click to expand...
Click to collapse
ROM has been uploaded yesterday but the dev doesn't own a U39GT. So anyone willing to test can do it now
I can't believe that slipped by me. Thanks for the heads-up. :good:
http://www.arctablet.com/blog/forum...2-custom-root-firmware-version-1-06-20131123/
This looks promising as well with 1.06 Cube firmware update and AOSP launcher.
New original Cube firmware 1.06 is downloadabl from official cube site.
http://www.51cube.com/ch/DownShow.asp?ID=205
I can recommend Google for translating the chinese, you can download the ROM from baidu which could take a few hours.
Awesome, thanks for the heads-up.
They require registration to access the downloads? Dammit, I refuse to create an account just to go and download something. Do you have an account there, locutus2000? If so, would you be willing to mirror it somewhere?
I was able to fix the IMEI issue, so it is safe to buy, again. The support from the vendor was not helpful, the wrong IMEI number is not only wrong for me but for all of the sold models. They all have 111111111111111 as IMEI number, no big deal with the MTK Droid Tools I was able to load a new IMEI, that was generated from an internet site. It works with the SIM cards now.
Important to know: the Cube 9 Talk with the 3G SIM card uses MediaTek MTK8389T CPU whereas the Cube 9 without the SIM card 3G feature uses a RockChip RK3188 CPU. The ROMs are not interchangeable.
So whatever issues you may have, it may be a completely different story for the person that owns the other chipset. Strange enough that Cube built two similar products with completely different hardware.
The Cube U39GT 3G ROM Version 1.03 for the 3G version can be found here:
http://www.51cube.com/ch/DownShow.asp?ID=206
If you have donwloaded and unpacked the firmware, you may end up with chinese folder names. Flash tool did not accept the scatter file when I tried to select it using these folder names.
To resolve this: Simply create a new folder name and copy/paste the ROM of the Cube to the new folder, the update should then work with the Flashtool. I have used Version 3.1328.0.183. The update takes a while so be patient. Worked with mine.
rooting cube u39gt
Hi Guys
sorry bit of a tablet noob.
Im struggling to find a method to root the u39gt so I can get to experiment with these roms
Any advice welcomed!
Cheers
Root Genius
anonymi23 said:
Hi Guys
sorry bit of a tablet noob.
Im struggling to find a method to root the u39gt so I can get to experiment with these roms
Any advice welcomed!
Cheers
Click to expand...
Click to collapse
Thank you for important info, I have 3G version too. And how did you succeed root, can you give me any advice?
Starting this thread to answer a very simple question.
I find some answers scattered through responses in a lot of other threads, but all the information is too spread out to be useful, so I'm trying to get all that info in a single thread.
Most of us will get their P780 through a Chinese website. Most of them will have an English interface probably, but are still the Chinese models.
The main difference is explained elsewhere, so not going into that. Just wondering, I'm living in Europe, but temporarily in Australia.
I have an Australian SIM1, and my European SIM2. Works just fine. Full reception on SIM2 all the time, SIM1 is kind of unstable, going from full reception to almost nothing and back when on 3G. But apart from that, fast data transfer.
In most countries, 3G on 900Mhz is not that popular anyways.
So, is there any reason to flash an ROW rom to a Chinese phone ?
- 3G 900Mhz band not available on Chinese models : does the ROW change that ? Or can you change it by flashing a different modem image or can't you enable 3G 900Mhz at all on them?
- custom ROM support : but so far I haven't seen a ROM interesting enough to do this. Most of us will want the latest android version, which is only VIBE 1.5 on Chinese ones anyways at this moment. SLX and Life look ok, but I don't see much difference with the VIBE roms (UI wise).
- English interface : you can switch the Chinese models to English without too many issues (some text still in Chinese, but not too annoying)
Do Chinese and ROW models have the same hardware, or are there differences ?
On Russian forums, people try to flash ROW to open up the 3G 900Mhz band, but so far, I couldn't find conclusive information that this actually works.
Taking it even further, is there any reason to go for a ROW(usually more expensive) model instead of a Chinese model ?
And perhaps the most important question of all : can you actually flash a ROW ROM on a Chinese model ?
Most answers I find elsewhere say it should work. But my phone gets stuck and won't even start when I do so. Perhaps I'm doing something wrong, perhaps because it's just not possible.
Update : In recent other posts, users successfully flashed a ROW on a Chinese model, so I'm assuming that is possible.
I invite you all to provide some answers or feedback, because when I was looking into buying this phone, that was my most important question
casaben said:
Starting this thread to answer a very simple question.
I find some answers scattered through responses in a lot of other threads, but all the information is too spread out to be useful, so I'm trying to get all that info in a single thread.
Most of us will get their P780 through a Chinese website. Most of them will have an English interface probably, but are still the Chinese models.
The main difference is explained elsewhere, so not going into that. Just wondering, I'm living in Europe, but temporarily in Australia.
I have an Australian SIM1, and my European SIM2. Works just fine. Full reception on SIM2 all the time, SIM1 is kind of unstable, going from full reception to almost nothing and back when on 3G. But apart from that, fast data transfer.
In most countries, 3G on 900Mhz is not that popular anyways.
So, is there any reason to flash an ROW rom to a Chinese phone ?
- 3G 900Mhz band not available on Chinese models : does the ROW change that ? Or can you change it by flashing a different modem image or can't you enable 3G 900Mhz at all on them?
- custom ROM support : but so far I haven't seen a ROM interesting enough to do this. Most of us will want the latest android version, which is only VIBE 1.5 on Chinese ones anyways at this moment. SLX and Life look ok, but I don't see much difference with the VIBE roms (UI wise).
- English interface : you can switch the Chinese models to English without too many issues (some text still in Chinese, but not too annoying)
Do Chinese and ROW models have the same hardware, or are there differences ?
On Russian forums, people try to flash ROW to open up the 3G 900Mhz band, but so far, I couldn't find conclusive information that this actually works.
Taking it even further, is there any reason to go for a ROW(usually more expensive) model instead of a Chinese model ?
And perhaps the most important question of all : can you actually flash a ROW ROM on a Chinese model ?
Most answers I find elsewhere say it should work. But my phone gets stuck and won't even start when I do so. Perhaps I'm doing something wrong, perhaps because it's just not possible.
I invite you all to provide some answers or feedback, because when I was looking into buying this phone, that was my most important question
Click to expand...
Click to collapse
I have ROW Phone bough and i commandet P780 Chinese version witch is more cheap then my row bought in my country. Half a price. I will not pay shipment because someone i know will bring it from there. I barrely wait to compare and i will tell you all about it.
So some follow up on my testing:
Remember : I'm working on a P780 4Gb Chinese with production date 15/03/14
This means I have to use a different preloader file than the ones included in all roms (at this moment). I that is not done, the phone will not boot (see my other thread http://forum.xda-developers.com/lenovo-p780/help/p780-bricked-flashing-wrong-rom-doesnt-t2749683).
I succesfully installed following ROMS :
- P780_S135_130917_rooted_twrp_gapps : standard Chinese rom, works well, some chinese, but does the job
- VIBEUI_V1.5_1419_5_DEV_P780_rooted_twrp_gapps : KitKat rom, worked very nice but had a huge problem with battery drain. Location services would hang an eat up to 15%/hour. Tried many things, and in the end, I got it more or less stable, but no location services (Google Now, Maps, weather,...). Too many problems with battery performance, so uninstalled
- P780_ROW_S124_140403_rooted_twrp_gapps + SLXROM_v24a-Lenovo_P780 : this combo gave me the purest Android system so far. Good old Android menus and behavior, good battery life, good everything. However, I had a major problem : every reboot, I would get a problem with SIM1 or SIM2 that did not come up. No problem, I could flash a modem like V52 Modem_S920 and the problem would be gone when the phone started up again...only to return on a next reboot. I liked the rom a lot, but that was just not workable.
- P780_ROW_S124_140403_rooted_twrp_gapps : The ROW stock rom, and I must say, I'm liking it. Works well, good battery, and in all honesty I kind of like the Lenovo shell. Nice launcher, nice behavior. I installed XPosed and GravityBox to update some things I didn't like without problems. Oh and the biggest surprise of all : in my SIM1, I see that WCDMA-GSM-900, aka 3G 900Mhz, is enabled, but I'm in a 2100Mhz only area, so I don't know if this is just there but not actually working... Furthermore, I liked the Power and security app from the VIBE 1.5 ROM, so I opened the img file, and extracted the apks, and installed them on this ROM, and it actually works nice without issues.
So for now, the last rom (ROW), gives me a non-Chinese, nice rom that has the 900MHz band enabled (will try to test soon).
casaben said:
So some follow up on my testing:
Remember : I'm working on a P780 4Gb Chinese with production date 15/03/14
This means I have to use a different preloader file than the ones included in all roms (at this moment). I that is not done, the phone will not boot (see my other thread http://forum.xda-developers.com/lenovo-p780/help/p780-bricked-flashing-wrong-rom-doesnt-t2749683).
I succesfully installed following ROMS :
- P780_S135_130917_rooted_twrp_gapps : standard Chinese rom, works well, some chinese, but does the job
- VIBEUI_V1.5_1419_5_DEV_P780_rooted_twrp_gapps : KitKat rom, worked very nice but had a huge problem with battery drain. Location services would hang an eat up to 15%/hour. Tried many things, and in the end, I got it more or less stable, but no location services (Google Now, Maps, weather,...). Too many problems with battery performance, so uninstalled
- P780_ROW_S124_140403_rooted_twrp_gapps + SLXROM_v24a-Lenovo_P780 : this combo gave me the purest Android system so far. Good old Android menus and behavior, good battery life, good everything. However, I had a major problem : every reboot, I would get a problem with SIM1 or SIM2 that did not come up. No problem, I could flash a modem like V52 Modem_S920 and the problem would be gone when the phone started up again...only to return on a next reboot. I liked the rom a lot, but that was just not workable.
- P780_ROW_S124_140403_rooted_twrp_gapps : The ROW stock rom, and I must say, I'm liking it. Works well, good battery, and in all honesty I kind of like the Lenovo shell. Nice launcher, nice behavior. I installed XPosed and GravityBox to update some things I didn't like without problems. Oh and the biggest surprise of all : in my SIM1, I see that WCDMA-GSM-900, aka 3G 900Mhz, is enabled, but I'm in a 2100Mhz only area, so I don't know if this is just there but not actually working... Furthermore, I liked the Power and security app from the VIBE 1.5 ROM, so I opened the img file, and extracted the apks, and installed them on this ROM, and it actually works nice without issues.
So for now, the last rom (ROW), gives me a non-Chinese, nice rom that has the 900MHz band enabled (will try to test soon).
Click to expand...
Click to collapse
Thanks alot for sharing this information with us. Now: can you tell us what are the 2 app original names in system.img?
Found them in the priv-app folder,not app folder (somewhere in system.img,forgot where exactly ?): LenovoPower.apk and LenovoSafeCenter.apk
Lots of other interesting stuff in that folder I must say ?
The power app in vibe 1.5 shows me more accurate timings and has a useful interface to see processes that consume power,especially the keep awake,aka wakelocks, and I like the privacy settings on the security app.but this one seems to crash sometimes because of conflict with the security app of current rom,but still...
Sent from my Lenovo P780_ROW using XDA Free mobile app
casaben said:
Starting this thread to answer a very simple question.
I find some answers scattered through responses in a lot of other threads, but all the information is too spread out to be useful, so I'm trying to get all that info in a single thread.
Most of us will get their P780 through a Chinese website. Most of them will have an English interface probably, but are still the Chinese models.
The main difference is explained elsewhere, so not going into that. Just wondering, I'm living in Europe, but temporarily in Australia.
I have an Australian SIM1, and my European SIM2. Works just fine. Full reception on SIM2 all the time, SIM1 is kind of unstable, going from full reception to almost nothing and back when on 3G. But apart from that, fast data transfer.
In most countries, 3G on 900Mhz is not that popular anyways.
So, is there any reason to flash an ROW rom to a Chinese phone ?
- 3G 900Mhz band not available on Chinese models : does the ROW change that ? Or can you change it by flashing a different modem image or can't you enable 3G 900Mhz at all on them?
- custom ROM support : but so far I haven't seen a ROM interesting enough to do this. Most of us will want the latest android version, which is only VIBE 1.5 on Chinese ones anyways at this moment. SLX and Life look ok, but I don't see much difference with the VIBE roms (UI wise).
- English interface : you can switch the Chinese models to English without too many issues (some text still in Chinese, but not too annoying)
Do Chinese and ROW models have the same hardware, or are there differences ?
On Russian forums, people try to flash ROW to open up the 3G 900Mhz band, but so far, I couldn't find conclusive information that this actually works.
Taking it even further, is there any reason to go for a ROW(usually more expensive) model instead of a Chinese model ?
And perhaps the most important question of all : can you actually flash a ROW ROM on a Chinese model ?
Most answers I find elsewhere say it should work. But my phone gets stuck and won't even start when I do so. Perhaps I'm doing something wrong, perhaps because it's just not possible.
Update : In recent other posts, users successfully flashed a ROW on a Chinese model, so I'm assuming that is possible.
I invite you all to provide some answers or feedback, because when I was looking into buying this phone, that was my most important question
Click to expand...
Click to collapse
Hummm...
Please do backup via spflash tool, i found somewhere on xda, spflash tool can pull a backup file from your rom what you using now. So if something happens you wouldn't worry. You have exactly right rom that always running on your phone.
Do research, 1st of all try flash all file and if ended with bootloop, you can try flash again and avoid to flash BL, preloader, sometimes nvram file.
If you have the right backup file, mediatek is nearly unbrickable, even imei can be write permanently without open your mainboard.
Sent from my Lenovo P780
cupliz said:
Hummm...
Please do backup via spflash tool, i found somewhere on xda, spflash tool can pull a backup file from your rom what you using now. So if something happens you wouldn't worry. You have exactly right rom that always running on your phone.
Do research, 1st of all try flash all file and if ended with bootloop, you can try flash again and avoid to flash BL, preloader, sometimes nvram file.
If you have the right backup file, mediatek is nearly unbrickable, even imei can be write permanently without open your mainboard.
Sent from my Lenovo P780
Click to expand...
Click to collapse
Please post for us a link for SP Flash Tool with backup. Thank you.
Sent from my Lenovo P780
stympy said:
Please post for us a link for SP Flash Tool with backup. Thank you.
Sent from my Lenovo P780
Click to expand...
Click to collapse
Try this bro...
Ive successful on acer liquid e2, this tutorial is very usefully for mtk devices that doesn't have official supports for roms. Should works fine on p780, if fail i think this tuts will never Broke our devices bro..
http://maxed4901note2.blogspot.com/2013/09/installing-clockworkmod-cwm-recovery-on.html?m=1
Sent from my Lenovo P780
cupliz said:
Try this bro...
Ive successful on acer liquid e2, this tutorial is very usefully for mtk devices that doesn't have official supports for roms. Should works fine on p780, if fail i think this tuts will never Broke our devices bro..
http://maxed4901note2.blogspot.com/2013/09/installing-clockworkmod-cwm-recovery-on.html?m=1
Sent from my Lenovo P780
Click to expand...
Click to collapse
Great tutorial on the, well mainly SPFT, thanks!
Problem I had with CWM (and apparently you have to have the right version for Chinese or ROW), is that although it did boot into recovery, I'd get random errors about /system or /data or whatever else could not mount. It would give errors when trying to take a backup, and it just didn't feel reliable.
TWRP on the other hand, works great, no issues (although it says that it needs to fix root permission whenever I exit it, but no problems).
After my experience with a wrong flash, I do believe the MT devices are almost unbrickable, as long as you have the right combination of files to flash onto it.
After trying like 7 ROMS, I decided to stick with the ROW stock on my Chinese model. Great battery, stable, the storage division is a bit small, I'm running out of internal storage although I have plenty left in built-in storage, but my apps don't want to install there, neither can I move them.
Most important indeed is : BACKUP first
Update on my current P780_ROW_S124_140403_rooted_twrp_gapps ROM :
Although it shows 900Mhz band active, the 3G connection was pretty unstable. It works well for 1 second, then goes to nothing, then back to working well.
So I decided to flash the V52 Modem_S920.
Downside : no 900Mhz (but is it still used in a lot of countries ?)
Upside : 3G connection a lot better and stable. Browsing the internet is fast.
Where I would see a download speed of 25Kb/s to 500b/s to 200b/s it now stays well above 10Kb/s, with speeds well above that most of the time(up to 250Kb/s)
Current test done in Jakarta (with local SIM). Will test again in other countries.
Hello forum, please excused my poor english.
A few month ago i was writing a text message when my phone screen doesn't work some parts of the left side (in that moment i was using cm11 android 4.4.4, recovery bigpart). So in that moment i do not care, i was using it with the keyboard horizontal. But with the passage of time the bluetooth, font camera and wifi doesn't work correctly.
I think it was a rom trouble, so i reset my phone, but it doesn't work. I reinstall the rom, doesn't work too. Even i installed the mokee rom (android 5.0.2).
Before cm11 i used cm7, cm9 4.0.4, cm10 cm10.1 (android 4.1.1, 4.1.2, 4.2.2, 4.3) and the phone work correctly (except some bugs ). So i reinstalled every of that's roms... the same problem.
I followed the instructions in this article https :// phenobarbital.wordpress.com/2014/08/22/motorola-android-rescatando-al-soldado-atrix-4g . Doen't work too
Searching in youtube i saw a lot of people with the same problem and one of the user comment that it should be the kernel, so i flash every kernel for atrix mb860 that i found in the internet... guess what, nothing.
I'm actually using a miui rom android 4.2.2., it work AMAZING and do not reheat instead from cm7 to cm11 and mokee rom, but i have the same trouble jaja.
with this rom and cm10.1, cm11 and mokee the kernel is the same 3.1.10, i think perhaps this is the cause, but when i try to flash another rom i loss android, then i have to reinstall it (now i know why).
I'm searching for a different kernel that work in android 4.2.2 up.
I'm sorry if i bored you and excused my poor english again if anyone can helpme i being really really grateful, i love that cell phone.
Forza Motorola Atrix 4g mb860 <3
I share a srennshot that show what is the part of sreen that do not work, it is just the space between the vertical lines, ignore the horizontal lines mega : /// #!5IgjmIRI!OFwb0qz2XHv3GvkkZCQiB5NRyL6PceMbfGmxXKLa6qc .
Is it touch screen or screen inside that don't work? U can try official android 2.3 and test all function it's the best, some time ago I have problem with touch screen and it stop working on left side so I had to replace it, about BT and WiFi it the chipset that stops working mosty because of heat that cpu/gpu produced and it's near it. Currently i'm using cm 12.1 (build from 14.06.2016 with kernel 3.1.10 and security patches 01.05.2016) which have few bug like not working fingerprint sensor and wrongly showing that I don't have gsm connection but I have, rest is great wifi, bt, gsm data, camera, sound all work and phone don't restarts like it was sometime on kitkat.
I don't understand. In the left side of the touch doesn't work. I try with a rom named darksideblur etc i think it is 2.3, but it's the same. When i using a recovery touch the left side work, that's the reason beacause i think that may be it is a kernel trouble.
I should try with a 2.3 stock rom.
And you should try with a miui rom jaja
lokr said:
Is it touch screen or screen inside that don't work? U can try official android 2.3 and test all function it's the best, some time ago I have problem with touch screen and it stop working on left side so I had to replace it, about BT and WiFi it the chipset that stops working mosty because of heat that cpu/gpu produced and it's near it. Currently i'm using cm 12.1 (build from 14.06.2016 with kernel 3.1.10 and security patches 01.05.2016) which have few bug like not working fingerprint sensor and wrongly showing that I don't have gsm connection but I have, rest is great wifi, bt, gsm data, camera, sound all work and phone don't restarts like it was sometime on kitkat.
Click to expand...
Click to collapse
Do you have the link of your rom and parches? Or may be i can fix mine?
pendejete said:
Do you have the link of your rom and parches? Or may be i can fix mine?
Click to expand...
Click to collapse
Yup, here --> firmware or firmware choose some of these, there are for european and us model, best for eu is 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31.20-release-keys-signed-NonEFIGSRetail-EU.sbf.gz for us idk I don't have us model. Flash it through rsd lite under windows 7 because under win 8 or 10 rsd lite don't recognize phone.
lokr said:
Yup, here --> firmware or firmware choose some of these, there are for european and us model, best for eu is 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31.20-release-keys-signed-NonEFIGSRetail-EU.sbf.gz for us idk I don't have us model. Flash it through rsd lite under windows 7 because under win 8 or 10 rsd lite don't recognize phone.
Click to expand...
Click to collapse
Thank you very much, i will comment later the results... I have rsd lite but i never used it instead i used sbf flash.
pendejete said:
Thank you very much, i will comment later the results... I have rsd lite but i never used it instead i used sbf flash.
Click to expand...
Click to collapse
well flashing that firmware i get this error message h ttps://mega.nz/#!0Qp10AwR!IcPEfoZYsMIJdrHVpq3lrUz-AYKXZ6eadDLBz4l7EJs . And i could see that the problem actualy is the screen (hardware) because in the recovery touch the left side doesn't work, i was wrong... at the end is a hardware trouble. Thank you very much again, i really really appreciate your help.
pendejete said:
well flashing that firmware i get this error message h ttps://mega.nz/#!0Qp10AwR!IcPEfoZYsMIJdrHVpq3lrUz-AYKXZ6eadDLBz4l7EJs . And i could see that the problem actualy is the screen (hardware) because in the recovery touch the left side doesn't work, i was wrong... at the end is a hardware trouble. Thank you very much again, i really really appreciate your help.
Click to expand...
Click to collapse
Interesting, the same problem occurred at my screen too, and precisely in this section (like it is on your screen) screen not work,
when I move a finger across that part of the screen, cursor skips that part.
Have you solved the problem, and how?
Motorola Atrix 4g, 4.4.4 KitKat
I need firmware for Chinese tablet call touch
board no : tw_j0750bsa_v22_20160531
CPU : ATM7051
why there are no replay ?
please help me
ashraf61279 said:
why there are no replay ?
please help me
Click to expand...
Click to collapse
Might be difficult to find. ??
So, what works and what doesn't?
Can you enter the recovery mode? Then you could possible dump the partitions and see the problem...
CXZa said:
Might be difficult to find. ??
So, what works and what doesn't?
Can you enter the recovery mode? Then you could possible dump the partitions and see the problem...
Click to expand...
Click to collapse
thank you for your reply
this TW J0750BSA V30 firmware work for me but with no touch screen work
i think ATM7051 K88 v1.6 may work fine but i can not find it for free ..
please if you can help me to find ATM7051 K88 v1.6 so i will try it
thank you again
Hmm... I seem to have met this atm7051 before..
Actions Tablet Tools
Actions' PAD Product Tools (Developer Editions) Download 1.01.02 http://yadi.sk/d/wn0y5BdtFmQy9 2012-12-25? (Use newer versions for Ainol firmwares) 1.02.02 http://yadi.sk/d/Xf5NVryz998nC 2013-01-08? (Hero 4 nuclear upgrade tool) 1.02.03 http://yadi.sk/d/GFpAmhs39QZ67 2013-01-28? 1.02.04...
www.slatedroid.com
Flashing firmware blindly is a bad idea. Some damage can happen. There have been some cases of touch module has flashed a new firmware or changed touch settings so that the touch doesn't work anymore.
You could try this old thing... it's from year 2014 do it might not work though. (Should update it to use newer detecting modules from some newer Actions' firmware, but it probably isn't worth it anymore)
Tool: Touch and G-sensor Module Detector
Flashed a wrong firmware and the touch and/or g-sensor doesn't work? Here is a simple tool that tries to reveal the names of the modules needed. Flash in recovery mode. Download: http://yadi.sk/d/2M9WVoEIboAmZ Too bad that there are lots of different modules with the same name. But still, it...
www.slatedroid.com
CXZa said:
Hmm... I seem to have met this atm7051 before..
Actions Tablet Tools
Actions' PAD Product Tools (Developer Editions) Download 1.01.02 http://yadi.sk/d/wn0y5BdtFmQy9 2012-12-25? (Use newer versions for Ainol firmwares) 1.02.02 http://yadi.sk/d/Xf5NVryz998nC 2013-01-08? (Hero 4 nuclear upgrade tool) 1.02.03 http://yadi.sk/d/GFpAmhs39QZ67 2013-01-28? 1.02.04...
www.slatedroid.com
Flashing firmware blindly is a bad idea. Some damage can happen. There have been some cases of touch module has flashed a new firmware or changed touch settings so that the touch doesn't work anymore.
You could try this old thing... it's from year 2014 do it might not work though. (Should update it to use newer detecting modules from some newer Actions' firmware, but it probably isn't worth it anymore)
Tool: Touch and G-sensor Module Detector
Flashed a wrong firmware and the touch and/or g-sensor doesn't work? Here is a simple tool that tries to reveal the names of the modules needed. Flash in recovery mode. Download: http://yadi.sk/d/2M9WVoEIboAmZ Too bad that there are lots of different modules with the same name. But still, it...
www.slatedroid.com
Click to expand...
Click to collapse
thank you for helping me ,, but it still no good news ,,,
please can you find ATM7051 K88 v1.6 for me
Cannot find that, sorry. I found one v1.2 forgotten to my disk. But using it hoping for the best would be wild goose chase.
v1.6: Why do you think it would work then?
Made another detector zip that use one touch detecting module more.
Taken from that 7051 kk firmware. Added also some touch modules to the package from two different kitkats.
See also your device's misc/modules folder what ctp_*.ko files is there. Sometimes manufactures just use the right module without using the ctp_detect.ko.
ACTIONS Modules Detector2. Flash in recovery mode.
Yandex
Finds everything
disk.yandex.com