Related
STEPS:
1- Install PhilZ Touch Recovery OR any CWM Recovery which is 6.0.5.0+ (needs HW TLS support).
->You can find compatible PhilZ Touch Recovery here (Use PhilZ Touch v6.57.2 for cm11 as I said on the thread linked below).
madteam.co/forum/index.php?topic=6338.0
->You can find latest compatible CWM recovery on the official thread linked at the end of this post.
2- Download the CM11 ROM file (.zip file) from here:
http://jenkins.androidarmv6.org/job/cm-ota/ (carefully read instructions on that page)
3- Now reboot to recovery and install the CM11 zip file which you just downloaded.
4- After installing that zip (or before installing - your wish...the order doesn't matter), make a data wipe (Wipe Data / Factory Reset).
5- Optionally, install gapps. You can find compatible gapps for cm11 here:
madteam.co/forum/index.php?topic=6285.0
First boot may take up to 5-10 minutes. You'll regularly (weekly for NIGHTLIES and monthly for RCs) get updates and you can update by following instructions given on that JENKINS page (which I linked to download CM11 ROM file).
-----> For more detailed info and to know about latest updates happening in androidarmv6's cm11 project, Go through the official thread:
http://madteam.co/forum/index.php?topic=5883.0
NOTE: I WOULD RECOMMEND EVERYONE TO FOLLOW THE OFFICIAL THREAD (linked above) TO KEEP IN PACE WITH LATEST UPDATES GOING ON IN ANDROIDARMV6 PROJECT. INSTALL INSTRUCTIONS ARE ALSO MENTIONED THERE, I WOULD RECOMMEND TO FOLLOW THE INSTRUCTIONS ON THAT THREAD IF MY POST SEEMS OUTDATED AND MY METHOD FAILS (in case I haven't updated my thread for latest updates happening in the project).
I've kept this post short and simple (I only mentioned necessary steps in short) . So if you have any doubts installing cm11 (KitKat 4.4.x), feel free to ask here.
Bhargav97 said:
STEPS:
1- Install PhilZ Touch Recovery OR any CWM Recovery which is 6.0.4.5+. You can find PhilZ Touch Recovery here:
http://forum.xda-developers.com/showthread.php?t=2653824
2- Download the CM11 ROM file (.zip file) from here:
http://jenkins.androidarmv6.org/job/cm-ota/ (carefully read instructions on that page)
3- Now reboot to recovery and install the CM11 zip file which you just downloaded.
4- Optionally, install gapps. You can find compatible gapps for cm11 here:
http://forum.xda-developers.com/showthread.php?t=2623802
First boot may take upto 5-10 minutes. You'll regularly (mostly weekly) get updates and you can update by following instructions given on that JENKINS page (which I linked to download CM11 ROM file).
For more detailed info and official threads, here are they:
1) http://madteam.co/forum/index.php?topic=5883.0
2) http://madteam.co/forum/index.php?topic=6192.0
I've kept this post short and simple (I only mentioned basic things) . So if you have any doubts installing cm11 (kitkat 4.4), feel free to ask here.
Click to expand...
Click to collapse
Have tried friends
I install this but don't have google play?
nemanjsb said:
I install this but don't have google play?
Click to expand...
Click to collapse
Did you install gapps?
I managed but rom have lag...
nemanjsb said:
I managed but rom have lag...
Click to expand...
Click to collapse
I haven't the rom, so i can't help you
Gapps are heavy.
Sent from my D620R [Stock 4.4.2]
Vagelis1608 said:
Gapps are heavy.
Sent from my D620R [Stock 4.4.2]
Click to expand...
Click to collapse
Coooool!
A 7 MB gapps package is heavy?
Bhargav97 said:
Coooool!
A 7 MB gapps package is heavy?
Click to expand...
Click to collapse
I didn't mean /system memory but RAM
I get error 0.
TransformixS4 said:
I get error 0.
Click to expand...
Click to collapse
Sorry, my mistake. I forgot to update this thread for latest changes in cm11 project (androidarmv6-cm11). I've updated my first post with new install instructions. They'll work now but I can't guaranty that they'll work in future if I don't update my thread for any major changes in cm11 project like: kernel 3 integration. I'll recommend you & all others to follow the official thread if my instructions fail.
NOTE: Please read my NOTE on first post to be safe in future.
Bhargav97 said:
Sorry, my mistake. I forgot to update this thread for latest changes in cm11 project (androidarmv6-cm11). I've updated my first post with new install instructions. They'll work now but I can't guaranty that they'll work in future if I don't update my thread for any major changes in cm11 project like: kernel 3 integration. I'll recommend you & all others to follow the official thread if my instructions fail.
NOTE: Please read my NOTE on first post to be safe in future.
Click to expand...
Click to collapse
Thanks
link not work...
Stuck on odin mode
Hi! A few years ago i bricked my i5500... i don't remember how...but, now, everytime i try to flash anything (in one package mode), odin stuck in this step (see the pic)...how can i solve?
I need the CM11 ROM file, does anyone have a copy to share?
Felipefpbm said:
I need the CM11 ROM file, does anyone have a copy to share?
Click to expand...
Click to collapse
I made a post in the Android Development Thread. Check there.
Hi guys!
I have just compiled Android AOSP Lollipop 5.0.0_r2 from Google latest sources and want to share with you.
No changes from me, super clean build. Keep in mind it's built with older preview binaries like all other ROMs.
Download flashable ZIP:
http://bit.ly/LRX21M
Instruction:
1.Boot into recovery
2.Flash attached zip
3.Flash GAPPS
4.Reboot and ejnoy!
Download IMG files:
http://bit.ly/LRX21M-IMG
Instruction:
1.Unpack files in android developer tools/platform-tools (where is your fastboot.exe placed)
2.Boot into bootloader
3.Run flash-all.bat file
4.Done! Enjoy!
For GAPPS flash TWRP recovery and correct zip file
Suggested GAPPS: https://drive.google.com/file/d/0B0LnTbgUOuxYTk5VS0tmbENqQzA/view
If you want to support student and his work:
First!! I flash this now
Thanks for rom, but what is correct gapps?
Racpu_ said:
Thanks for rom, but what is correct gapps?
Click to expand...
Click to collapse
Added in OP
Cannot get the the gapps seems its been downloaded to many times. Thanks for this though any links to other gapps ?
Sent from my Nexus 5 using XDA Premium HD app
sorry, this is the ultimate rude question but, how's this different from the other roms built from source with Lollipop 5.0.0_r2
katsumeiyo said:
sorry, this is the ultimate rude question but, how's this different from the other roms built from source with Lollipop 5.0.0_r2
Click to expand...
Click to collapse
It's built a bit later, didn't check it really, maybe it cointains more changes. But even now there are few new commits in AOSP, not included yet in any ROM.
mastero9017 said:
It's built a bit later, didn't check it really, maybe it cointains more changes. But even now there are few new commits in AOSP, not included yet in any ROM.
Click to expand...
Click to collapse
any changes to the illusionL gapps? https://www.androidfilehost.com/?fid=95784891001606650
katsumeiyo said:
any changes to the illusionL gapps? https://www.androidfilehost.com/?fid=95784891001606650
Click to expand...
Click to collapse
It's their own mirror of gapps.
IMG files added in OP!
Niiiiice
Woops! wrong thread
What is the difference between the lollipop binaries and offical binaries? Like functionaily wise
Does this contain SuperSU, or do I need to flash after install?
Whenever I try to flash, it tells me that there is no OS installed when I try to reboot.
NO OS install like another L thread.
Deleted
Sorry op for posting link
Worked for me. I flashed a factory image of kitkat, then factory reset, then flashed twrp recovery, and then flashed this zip with the gapps for lollipop hosted by cyanogen.
Got root by flashing supersu's modded kernel and then supersu update zip.
All apps were automatically backed up after boot, but there is one strange thing:
Google play keeps telling me Google plus is incompatible. Is this something wrong with the Rom? Or lollipop? Or something else??
ps000000 said:
NO OS install like another L thread.
Click to expand...
Click to collapse
Just reboot.
Merckle said:
What is the difference between the lollipop binaries and offical binaries? Like functionaily wise
Click to expand...
Click to collapse
Just updated drivers really. There currently aren't any lollipop binaries that are available. Unless you can pull them from the current preview. However, you can use the preview binaries or the 4.4.4 ones until the new ones drop. I used the preview ones, but haven't been able to flash it yet.
Jnn1 said:
Worked for me. I flashed a factory image of kitkat, then factory reset, then flashed twrp recovery, and then flashed this zip with the gapps for lollipop hosted by cyanogen.
Got root by flashing supersu's modded kernel and then supersu update zip.
All apps were automatically backed up after boot, but there is one strange thing:
Google play keeps telling me Google plus is incompatible. Is this something wrong with the Rom? Or lollipop? Or something else??
Click to expand...
Click to collapse
Where are there cm gapps you speak of??
Edited : found them here https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141106-signed.zip
Thanks for the rom!
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
We are waiting for AD release. At least a beta?
mido25 said:
We are waiting for AD release. At least a beta?
Click to expand...
Click to collapse
Don't you know how to use the JustArchi's github?
Wow, really helps. I wish I have my OnePlus2 now.
Guihardrock said:
Don't you know how to use the JustArchi's github?
Click to expand...
Click to collapse
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
mido25 said:
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
Click to expand...
Click to collapse
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Guihardrock said:
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Click to expand...
Click to collapse
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
mido25 said:
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Lost recovery
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
JustArchi said:
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
Click to expand...
Click to collapse
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
eswa1068 said:
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
Click to expand...
Click to collapse
Use fastboot to flash the recovery
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
Thank you Sir
Tierri said:
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
Click to expand...
Click to collapse
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
amit_sen said:
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Yes. See the images to help you.
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
It's around 900 mb zip..?
And did anyone try that build..?
Mohit31 said:
It's around 900 mb zip..?
And did anyone try that build..?
Click to expand...
Click to collapse
Its because of the aroma you can choose the gapps of your choice...
Guihardrock said:
Its because of the aroma you can choose the gapps of your choice...
Click to expand...
Click to collapse
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
This thing should be STICKY
Finally was able to install CM13 properly using this recovery without Google Services crashing.
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
Now i am in oos3 but when justarchi release archidroid i wont use any other rom, i had so great experience with this on my s3
Edit: i am gonna try it :3 yo made me do it
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
rom is smooth as h*ll and battery is better than in normal cm13 but as i said the backed dont work yet :3 and aroma is not fully functional with the bootanimation and root (but the rom has the cm superuser)
Hi! I Want to Share with you official Stock Clean Deodex Zipalign ROMs kernel pathed, DRM-fix included
It's a base for development and is ready for modifications like eXposed etc. or for patch ROMs (like an eXistenZ O ROM etc.)
Download:
Now I have deodexed .50 FW (for eXistenZ O v6.0.0):
F5121 download (MEGA)
F5122 download (MEGA)
Deodex .85 FW
F5121 download (MEGA)
F5122 download (MEGA)
Latest Stock Deodex .118 FW (for eXistenZ O v7.0.0):
F5121 download (MEGA)
F5122 download (MEGA)
folder with ROMs
ROMs tested on both devices F5121 and F5122 so enjoy.
before installing:
make shure you have unlocked bootloader and backup DRM-keys with Dirty Caw exploit
Have allready installed latest SONY FW with Flashtool or Emma for latest bootloader
Backup all your Data before wipe
Installation:
1) Copy Deodexed ROM zip into a memory card or internal phone storage
2) Install TWRP 3.x.x
3) Go to TWRP and make wipe (data, system, cache, dalvik cache)
4) Go to Install section of TWRP and navigate to zip location
5) install zip with Full Deodex ROM
6) restart the phone with TWRP
7) wait while bootable
8) enjoy
if you need root or other addons make shure you have boot ROM first. Don't flash all zips mods after ROM installation it cause a bootloop and you will wipe and install the ROM again
Have good battery? What hours on display? Is interesing
Raulxperrx said:
Have good battery? What hours on display? Is interesing
Click to expand...
Click to collapse
Like on Stock FW, the ROMs have not any modification, so battery life is the same as on stock. You can mod it by yourself.
can u make one for f5122 from. 266 7.0
why is it not installing on my F5122? I am trying to install .85 FW but while flashing its showing Error 7, this zip is for SUZU DSDS device but this is a SUZU device.
I am using TWRP 3.2.2
kloroform said:
why is it not installing on my F5122? I am trying to install .85 FW but while flashing its showing Error 7, this zip is for SUZU DSDS device but this is a SUZU device.
I am using TWRP 3.2.2
Click to expand...
Click to collapse
Fixed, try download again and install.
lubik1 said:
Fixed, try download again and install.
Click to expand...
Click to collapse
Now flashing is fixed but ROM is not working, there is just a black screen after the Bootloader unlocked warning screen.
Can you make a deodex of the latest .97 stock?
Could you do a download mirrors in GDrive?
updated. add latest .118 FW
lubik1 said:
updated. add latest .118 FW
Click to expand...
Click to collapse
Will it work with F5122?
twain55 said:
Will it work with F5122?
Click to expand...
Click to collapse
Added ROM for F5122
Question - why whole rom? Are there other things modified besides /system/ (app, priv-app, framework, vendor)? I'm asking because of my problems with deodexing XC, as I mentioned to you. What files or folders are changed besides /system? Thanks
levone1 said:
Question - why whole rom? Are there other things modified besides /system/ (app, priv-app, framework, vendor)? I'm asking because of my problems with deodexing XC, as I mentioned to you. What files or folders are changed besides /system? Thanks
Click to expand...
Click to collapse
That's a Full ROM Deodex, for who, who want flash once ROM with Full Wipe from recovery and don't want search a reasons - why his phone does not boot properly... If you wanna Patch a Stock Odex System from recovery - This thread for you.
there are many kitchens on XDA (free and not) what Deodex fully and partially (make patch) for Odexed ROM, so just search it.
lubik1 said:
That's a Full ROM Deodex, for who, who want flash once ROM with Full Wipe from recovery and don't want search a reasons - why his phone does not boot properly... If you wanna Patch a Stock Odex System from recovery - This thread for you.
there are many kitchens on XDA (free and not) what Deodex fully and partially (make patch) for Odexed ROM, so just search it.
Click to expand...
Click to collapse
Thanks
I have not had any problems deodexing or making patches or zips. I've been doing it since LP, and haven't had any problems. TOAD worked fine to deodex the whole 118 system (/app, /priv-app, /framework, and /vendor/framework), and flash it, but there's some problem. I flash clean stock rom, flash deodex with wipe, and no other mods, and it boots fine and all apps work, but it's slow and laggy (sticky, stuttering). That's why I wondered if maybe something else in / might need to be modified. The error in locating is 'can't create image space from image file system/framework/boot.art... Only Zygote can create global boot image'.
levone1 said:
Thanks
That's why I wondered if maybe something else in / might need to be modified. The error in locating is 'can't create image space from image file system/framework/boot.art... Only Zygote can create global boot image'.
Click to expand...
Click to collapse
Try Deodex with Superr's Kitchen (i think your problem was in Deodexer)
lubik1 said:
Try Deodex with Superr's Kitchen (i think your problem was in Deodexer)
Click to expand...
Click to collapse
You were right - SuperR did it. I posted your xposed fix in xc thread. Let me know if OK.
levone1 said:
You were right - SuperR did it. I posted your xposed fix in xc thread. Let me know if OK.
Click to expand...
Click to collapse
no problem! good job!
This is my daily ROM. Its perfect for daily use.
Stock Oreo + Debloated + Magisk + Xposed <3
F5122,
Am getting boot loop .I was using AOSP P.Please help.I am not able to enter recovery too,
Hello all,
Can any one please suggest for me best TWRP mod as the offical 3.3.0.0 has many bugs and freezes ?
Thanks in advance
magaedy said:
Hello all,
Can any one please suggest for me best TWRP mod as the offical 3.3.0.0 has many bugs and freezes ?
Thanks in advance
Click to expand...
Click to collapse
I am using twrp 3.4.0 by reignz. It is unofficial but has no issues as far as I've used it. Other option would be pitchblack recovery. It is official and is based on twrp 3.4.0 source. Orangefox is also there but the latest one is unofficial as the official one has no maintainer now. And SHRP is also fine.
callmebutcher101 said:
I am using twrp 3.4.0 by reignz. It is unofficial but has no issues as far as I've used it. Other option would be pitchblack recovery. It is official and is based on twrp 3.4.0 source. Orangefox is also there but the latest one is unofficial as the official one has no maintainer now. And SHRP is also fine.
Click to expand...
Click to collapse
I searched for links for these twrp versions but I couldn't find anything, Could you provide me pls with links ?
magaedy said:
I searched for links for these twrp versions but I couldn't find anything, Could you provide me pls with links ?
Click to expand...
Click to collapse
https://sourceforge.net/projects/pitchblack-twrp/files/beryllium/
MOD EDIT: Link Removed
callmebutcher101 said:
https://sourceforge.net/projects/pitchblack-twrp/files/beryllium/
MOD EDIT: Link Removed
Click to expand...
Click to collapse
Thank you so much I tried pitchblack twrp and it's perfect without any bug
magaedy said:
Thank you so much I tried pitchblack twrp and it's perfect without any bug
Click to expand...
Click to collapse
The pitchblack twrp is a zip file. Can you tell me how did you install it on your Poco F1. Thanks.
Thanks to 'callmebutcher101' for sharing the file.
GrippingSphere said:
The pitchblack twrp is a zip file. Can you tell me how did you install it on your Poco F1. Thanks.
Thanks to 'callmebutcher101' for sharing the file.
Click to expand...
Click to collapse
Just flash it in your current recovery like any other flashable zip. Then reboot to recovery. Or you can find the .img file inside the zip. You can flash it via fastboot.
callmebutcher101 said:
Just flash it in your current recovery like any other flashable zip. Then reboot to recovery. Or you can find the .img file inside the zip. You can flash it via fastboot.
Click to expand...
Click to collapse
Thank you. I found there is an option 'Install Image' within TWRP, then select partition 'Recovery' where to install the file. This is the one I used to install the .img file.