Hello.
Will flashing Stock Kernel for Z2 fix my issue with charging when phone is off? (it now reboots all the time i plug in the cable)
Or will this cause a soft/hard-brick??
I was advised to use a different kernel, but I dont know.
Best, bjorn96
PS: my phone has CM11 ROM
You can't use stock kernel with cm and cm based roms
Sent from my Xperia Z2 using Tapatalk
Mr.R™ said:
You can't use stock kernel with cm and cm based roms
Click to expand...
Click to collapse
DooMLorDS works, but just bootloop.
http://forum.xda-developers.com/showthread.php?t=2735137
bjorn96 said:
DooMLorDS works, but just bootloop.
http://forum.xda-developers.com/showthread.php?t=2735137
Click to expand...
Click to collapse
Doormlords kernel is ment for stock based roms only, not cm based.
Thats why you get bootloop
But I think the charging issue is a bug.
Sent from my D6503
It's amazing how little people listen
Sent from my Xperia Z2 using Tapatalk
Related
Hi!
I have SE Neo, I unlocked BL an flashed CM 7.1, everything worked good.
Later I noticed it didn't support HDMI, so I restored my old backup, didn't work freeze at SE logo, later I tried to flash SE Tweaked 8.5 Tom same thing, and of course I wiped all before flashing.
Now I have went back too CM works nice. But I want HDMI to work.
What can I have done wrong? Is the simpliest way to solve this using flashtool and stock rom?
Try flashing with the flashtool.
Kernel has to be dooms or inteks not cm kernel
No need for new thread
Sent from my MT15i using xda premium
kormatoes said:
Kernel has to be dooms or inteks not cm kernel
No need for new thread
Sent from my MT15i using xda premium
Click to expand...
Click to collapse
Does any of those kernels have se logo as boot logo ? I think he is using stock kernel since he have se logo as boot image.Or am I missing something here ?
Thilina said:
Does any of those kernels have se logo as boot logo ? I think he is using stock kernel since he have se logo as boot image.Or am I missing something here ?
Click to expand...
Click to collapse
Just another post claiming stock wouldn't work after flashing cm
And our Rom is not for stock is for custom and if he was on stock it would of booted but been crap
As it don't have ini.d and I bet he never cleaned data cashe dalvik
Sent from my MT15i using xda premium
kormatoes said:
Kernel has to be dooms or inteks not cm kernel
No need for new thread
Sent from my MT15i using xda premium
Click to expand...
Click to collapse
So thread closed. Please search before open a new thread, and read this. Best regards,
Hi,
My apologies. I cannot post this in the development thread, so I am opening this thread.
I have flashed DoomLorD's kernel (v0.3). Can I use it with the CM9 ROM or do I have to flash the kernel specified there (which by the way, I cannot find in the .zip)?
Thank you.
Yes you can use it...but the fxp is still not stable enough...a lot of features have been disabled
Sent from my LT26i using xda premium
Both the kernels are the same
Sent from my LT26i using xda premium
Thanks
You may not be able to post in the dev thread bit you can read it.
http://forum.xda-developers.com/showpost.php?p=25340508&postcount=330
Oh....doom Lord has himself spoken....can't use the kernel with Cm9...but Cm9 worked smoothly on my xs with doom kernel....
Sent from my LT26i using xda premium
Well, I tried flashing it with the DooM kernel, but it didn't work.
Got stuck in boot loop.
Where can I get the CM9 kernel from?
deathscream said:
Oh....doom Lord has himself spoken....can't use the kernel with Cm9...but Cm9 worked smoothly on my xs with doom kernel....
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Can you explain how you flashed CM9 on your Xperia S?
I don´t know how you got It to work but I thought CM9 is a ICS Rom so you can´t use it with a kernel which is made for 2.3 GB ?!?
Or am I wrong?
Apology11 said:
I don´t know how you got It to work but I thought CM9 is a ICS Rom so you can´t use it with a kernel which is made for 2.3 GB ?!?
Or am I wrong?
Click to expand...
Click to collapse
That's what I was thinking as well...
Since it's ICS based, it shouldn't have worked with Doom's kernel
No idea how he got it to work...not even sure why he even wants to put on CM9, since there is no data yet
avi.levi said:
Well, I tried flashing it with the DooM kernel, but it didn't work.
Got stuck in boot loop.
Where can I get the CM9 kernel from?
Click to expand...
Click to collapse
Seriously, go and read the fxp thread on how to flash the kernel, it's in the first post. if you want doomlord kernel read his thread but use stock.
If you can't read, get off xda - you'll end up breaking your phone.
Apology11 said:
I don´t know how you got It to work but I thought CM9 is a ICS Rom so you can´t use it with a kernel which is made for 2.3 GB ?!?
Or am I wrong?
Click to expand...
Click to collapse
I think the installation package for CM9 will flash also the CM kernel included.
Maybe not sure.
Sent from my LT26i using Tapatalk 2
I don´t know, but in that case he should have recognized that there is no "DoomLord" Bootlogo...
avi.levi said:
Can you explain how you flashed CM9 on your Xperia S?
Click to expand...
Click to collapse
I guess i got lucky but I used the doom kernel 0.3 a ....the CM9 FXP115 booted fine on my Xs...anyway you can get the CM9 kernel from the FXP zip file.....search for a file with the name : kernel.elf ....
---------- Post added at 10:40 AM ---------- Previous post was at 10:38 AM ----------
Apology11 said:
I don´t know, but in that case he should have recognized that there is no "DoomLord" Bootlogo...
Click to expand...
Click to collapse
The doomlord boot log was intact....
here's a link that explains in detail how to flash the CM9 kernel and the fxp update.zip....
http://androidmanualguide.com/andro...-sandwich-gets-your-cyanogenmod-9-on-xperia-s
FXP119...
Any idea what works on the fxp119 nozomi?? Still waiting fo the upload.....
Flashed champswimmer's CM9 kernel and the Xperia S ICS rom and the wifi modules that came with the kernel, but wifi still refuses to turn on. Anyone know how to fix this?
Did you flash KCernel?
Sent from my X10S using xda app-developers app
Well at the moment there's some problem with wifi which will be fixed soon
If you look into into his aokp thread you can find out a fix there
Sent from my X10
THeLogiC said:
Well at the moment there's some problem with wifi which will be fixed soon
If you look into into his aokp thread you can find out a fix there
Sent from my X10
Click to expand...
Click to collapse
Oh so it's not just a glitch on my unit? Does Wifi on the FXP kernel work?
Did you flash KCernel?
Sent from my X10S using xda app-developers app
Click to expand...
Click to collapse
Yup, running the Xperia S ICS rom as well, which requires that
Panzerfaust101 said:
Oh so it's not just a glitch on my unit? Does Wifi on the FXP kernel work?
Yup, running the Xperia S ICS rom as well, which requires that
Click to expand...
Click to collapse
see this posts:
http://forum.xda-developers.com/showpost.php?p=29261702&postcount=518
http://forum.xda-developers.com/showpost.php?p=29264012&postcount=521
Hi to all friends,I have a big problem.
I have neo with open boot loader, I had miui v4 Rom and yesterday tried to install optimax2.0 .I didn't like the Rom and I wanted to return to miui again with new install,after finishing aroma installation phone rebooted but it hanged on miui boot screen,I reinstalled again with complete wipe the phone boot normally but after first reboot it hanged again on miui bootscreen, I installed Xperia T v5.5 but it hanged again on first restart,
I don't understand why it hangs on first restart?please help me
Sent from my MT15i using Tapatalk 2
try a diff kernel first..if that doesnt work..then
start from scratch..check if this happens with official ICS..if it does, then its prolly kernel related i guess..reflash kernel..
Alisoofi said:
Hi to all friends,I have a big problem.
I have neo with open boot loader, I had miui v4 Rom and yesterday tried to install optimax2.0 .I didn't like the Rom and I wanted to return to miui again with new install,after finishing aroma installation phone rebooted but it hanged on miui boot screen,I reinstalled again with complete wipe the phone boot normally but after first reboot it hanged again on miui bootscreen, I installed Xperia T v5.5 but it hanged again on first restart,
I don't understand why it hangs on first restart?please help me
Sent from my MT15i using Tapatalk 2
Click to expand...
Click to collapse
I am not sure because I never used a miui Rom but if I remember correct most or all miui roms are based on cm.
And cm needs special kernels. So flash a proper kernel than the rom and all should be fine.
Send from my Neo V via Jelly Sandwich 7.4 and night elf 1.5 using Tapatalk 2
hi dear friend, the miui Rom was stock based ICS Rom build 587 from Sony, it is not cm based
Sent from my MT15i using Tapatalk 2
LoneWanderer said:
try a diff kernel first..if that doesnt work..then
start from scratch..check if this happens with official ICS..if it does, then its prolly kernel related i guess..reflash kernel..
Click to expand...
Click to collapse
I usually use night elf v1.5 or 1.4 kernel, they worked with miui fine before this problem,
You mean I flash a stock Rom and then check the problem?
My bootloader is unlocked ,isn't it dangerous?
Sent from my MT15i using Tapatalk 2
Alisoofi said:
hi dear friend, the miui Rom was stock based ICS Rom build 587 from Sony, it is not cm based
Sent from my MT15i using Tapatalk 2
Click to expand...
Click to collapse
Ok learned something new.
Till now I only knew from miui roms that come cm based. Thats the reason I never tried one.
For me there is only one good cm Rom and thats the old good cm 7.2
Send from my Neo V via Jelly Sandwich 7.4 and night elf 1.5 using Tapatalk 2
---------- Post added at 11:08 AM ---------- Previous post was at 11:05 AM ----------
Alisoofi said:
I usually use night elf v1.5 or 1.4 kernel, they worked with miui fine before this problem,
You mean I flash a stock Rom and then check the problem?
My bootloader is unlocked ,isn't it dangerous?
Sent from my MT15i using Tapatalk 2
Click to expand...
Click to collapse
What should happen?
Your bootloader stays unlocked. You will get stock kernel back but you can flash back night elf kernel.
If you flash stock Rom with an ftf file you can exclude the kernel and your currently flashed kernel will stay.
Send from my Neo V via Jelly Sandwich 7.4 and night elf 1.5 using Tapatalk 2
I usually use night elf v1.5 or 1.4 kernel, they worked with miui fine before this problem,
You mean I flash a stock Rom and then check the problem?
My bootloader is unlocked ,isn't it dangerous?
Click to expand...
Click to collapse
Lemme clear things up..first of all try a diff kernel..if that doesnt solve it..then flash official .587 using flashtool..
no its not dangerous
Hi
Friend of mine own neo v and he want to try new roms.
We tried custom ics, jb and everything was fine.
But we cant make kitkat works, any rom we try, any kernel we use, the touchscreen is not working.
It is possible to open everything what can be open using only hardware buttons, but thats all.
In recovery everything is fine, just roms.
Any ideas?
Thanks in advance
Sent using C6833 - Carbon KitKat/Pimped Z1 Kernel
ch3mn3y said:
Hi
Friend of mine own neo v and he want to try new roms.
We tried custom ics, jb and everything was fine.
But we cant make kitkat works, any rom we try, any kernel we use, the touchscreen is not working.
It is possible to open everything what can be open using only hardware buttons, but thats all.
In recovery everything is fine, just roms.
Any ideas?
Thanks in advance
Sent using C6833 - Carbon KitKat/Pimped Z1 Kernel
Click to expand...
Click to collapse
That happens bcoz u flashed wrong rom
Flash stock.ftf then go ahead
Google it
Sent from my MT11i using XDA Premium 4 mobile app
Thanks. We tried it but still nothing. His model is neo v so we use zip for haida, bu touchscreen still doesnt work
We used stock .587 as base
Edit: Now something change... to worse. We cant make to work touchscreen on any nonstockbased roms...
Any ideas?
Sent using TF300T - CyanogenMod 11.0/GEASS (F2FS)