Q&A for [ROM][5.0][Lollipop][Official] NamelessROM 2.0 [ALPHA]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0][Lollipop][Official] NamelessROM 2.0 [ALPHA]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Anyone managed to dual boot it ?
Syden said:
Anyone managed to dual boot it ?
Click to expand...
Click to collapse
@Lukijs did
Syden said:
Anyone managed to dual boot it ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=56742439&postcount=41
I think this ROM is for I9300 and not for the I9305
Lukijs said:
http://forum.xda-developers.com/showpost.php?p=56742439&postcount=41
Click to expand...
Click to collapse
OK, can you please point me to a guide to dual booting. Did you put this ROM as 1st rom or 2nd?
error during instalation
Cannot mount /data device or data are busy ...
Help..
prabhjots said:
OK, can you please point me to a guide to dual booting. Did you put this ROM as 1st rom or 2nd?
Click to expand...
Click to collapse
As you can see in screens, kitkat is 1st and Lollipop is 2nd rom ..go to arter97 kernels thread and check last 2 pages I think, there was guide
rom issue
hi
if i flash rom from recovery, phone always restart and not booting
but if i flash arter kernel phone boots
but statusbar now showing
wifi not connecting
sd card not working
thanks
few problems
There is problem while connecting to a wifi, its not getting connected....
using mobile data which shows connected but unable to load either in web briwser or play store....
but the rom is awesome great work...
fix the issues soon...
---------- Post added at 11:37 AM ---------- Previous post was at 11:32 AM ----------
pouya06 said:
hi
if i flash rom from recover phone always restart and not booting
but if i flash arter kernel phone boots
but statusbar now showing
wifi not connecting
sd card not working
thanks
Click to expand...
Click to collapse
try with stock kernel it will take 5-10 minutes to boot but everything working except networks
Well after reading all the posts I decided to test it. First of all, I'm no developer. Here's what I did;
1. Did "Wipe to install a new ROM" from philz
2. Installed ROM
3. Installed Gapps.
That's pretty much it for everyone who keeps asking how to install it -_- and the first boot took about 10 minutes for some reason.
As for bugs, I still haven't experienced a single issue except for the keyboard problem which I fixed by enabling hardware keyboard from settings. Everything works smooth as silk :')
Just sharing my results because of all the negative posts..
Great work devs!
I tried to install that rom (which looks amazing by the way) but when I reboot my device after install it just shows the bubbles and restarts.
I replaced a recovery (from ClockWorkMod to Philz) but it still exists.
what can I do?
Thanks.
mohitc6 said:
There is problem while connecting to a wifi, its not getting connected....
using mobile data which shows connected but unable to load either in web briwser or play store....
but the rom is awesome great work...
fix the issues soon...
---------- Post added at 11:37 AM ---------- Previous post was at 11:32 AM ----------
try with stock kernel it will take 5-10 minutes to boot but everything working except networks
Click to expand...
Click to collapse
i do this , but not work at all!
phone just shows the bubbles and restarts
found a slove, download arter97 kernel (5.0 version) and flash it after installing the rom and gapps.
TheAia said:
found a slove, download arter97 kernel (5.0 version) and flash it after installing the rom and gapps.
Click to expand...
Click to collapse
That works too but I don't know I didn't have to flash his kernel. I just installed the ROM and the default kernel it came with :/ Glad it's working for you :3
Still can't have the Wi-Fi working.
Sent from my GT-I9300 using XDA Free mobile app
I gave up trying after my battery became near empty from 90%. I am getting home screen without status bar and lockscreen if i flash with arter's kernel otherwise just bubbles and bootloop. Few managed to getting the rom work, Does previous rom and recovery(i am using latest twrp) have anything to do with this?
problem
hi what can i do i have boot loop in boot animation?
Lukijs said:
http://forum.xda-developers.com/showpost.php?p=56742439&postcount=41
Click to expand...
Click to collapse
Hi,
Can I dual boot this with s5 mini v6.1 (TouchWiz android 4.4 4) using arter kernel ?
When flashing I get error sth like : cannot mount ext4 .... device or file busy .
Related
[Q&A] [ROM] [AOSP] Lollipopalooza | flounder/volantis/Nexus 9 | LRX21M | 2014/11/08
Q&A for [ROM] [AOSP] Lollipopalooza | flounder/volantis/Nexus 9 | LRX21M | 2014/11/08
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [AOSP] Lollipopalooza | flounder/volantis/Nexus 9 | LRX21M | 2014/11/08. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
USBhost said:
ok awesome doing a factory reset now
Edit: can you add long back to kill app
---------- Post added at 07:34 PM ---------- Previous post was at 07:13 PM ----------
it booted
and it worked cheers tytyty
---------- Post added at 07:45 PM ---------- Previous post was at 07:34 PM ----------
it feels so much faster now
Click to expand...
Click to collapse
Could you please provide us the modified kernel without encryption?
Edit: Thanks USBHost for the updated kernel without encryption :good:
F2FS
Hi, can we hope for a All-f2fs release of your rom? Wondering what will be the performance like....
daniii88 said:
Hi, can we hope for a All-f2fs release of your rom? Wondering what will be the performance like....
Click to expand...
Click to collapse
In due time... First step in ironing out the basic kinks.
when you have just enough information to be dangerous
As I wait for your new rom to finish loading - I thought I would share all the fun I've had getting here.
As per the reply title. I stumbled getting into device recovery after flashing the first step in your install process ....several panic attacks and some google search to figure out the power then up volume to get to the recovery options... still not as bad as my adventure of ensuring I could return to factory settings yesterday . downloaded the fugu image instead of the volblahblah .... as to be expected , my device refused to morph into googles new player no matter how many flashes I tried.
But that was yesterday , today I had to conquer the driver issue on my window machine for the side load to work, there is some hair I wont ever see again. That was almost as much fun as slamming my head against the wall. I have to tip my hat to your efforts and to the forum in general for the fun adventure in flashing.
After flashing Lollipopalooza N9 can't boot
Can't boot to the accrual system after flashed Lollipopalooza .
Previously of that , I try to flash the Q update and it turns out I not only can't flash the image but also wipe my original system........ So I try to flash Lollipopalooza to save it, but still has the problem.
Thanks
Thanks for sharing.
There are so many informations you brought to us.
----------------------------------------------------------------------------
yeah, i'm stuck in that boat too. The lollipopalooza recovery just gives me a read triangle. I can get TWRP running, but it won't flash Lolipopalooza. It returns with "Error executing updater binary
---------- Post added at 09:47 PM ---------- Previous post was at 09:45 PM ----------
Jarvia_STGL said:
Can't boot to the accrual system after flashed Lollipopalooza .
Previously of that , I try to flash the Q update and it turns out I not only can't flash the image but also wipe my original system........ So I try to flash Lollipopalooza to save it, but still has the problem.
Click to expand...
Click to collapse
Yeah, i'm stuck in that boat too. The lollipopalooza recovery just gives me a read triangle. I can get TWRP running, but it won't flash Lolipopalooza. It returns with "Error executing updater binary"
cagra said:
yeah, i'm stuck in that boat too. The lollipopalooza recovery just gives me a read triangle. I can get TWRP running, but it won't flash Lolipopalooza. It returns with "Error executing updater binary
---------- Post added at 09:47 PM ---------- Previous post was at 09:45 PM ----------
Yeah, i'm stuck in that boat too. The lollipopalooza recovery just gives me a read triangle. I can get TWRP running, but it won't flash Lolipopalooza. It returns with "Error executing updater binary"
Click to expand...
Click to collapse
When you are on the red triangle page you need to press Power and Volume up to get into the recovery menu.
To flash Lollipopalooza with TWRP, you need to edit the updater-script present in the archive. Replacing flounder by volantis around the 2nd or 3rd line...
By the way, you can find the precise answer by doing a little search on the Lollipopalooza rom thread...
No offense but RTFM !!!!
Will update the build up to 5.0 (LRX21R)?
Elias_Foreman said:
Will update the build up to 5.0 (LRX21R)?
Click to expand...
Click to collapse
Updated to LRX21V. Check the ROM thread.
Good build.I seeking for kernel use with your rom?
If I turn encryption back on in the latest 11/28 ROM, will I be able to update to newer versions without formating userdata? I like using custom Roms, but would also like to stay encrypted. It would be nice to be able to use saved TWRP backups on an USB otg device, but I'm not sure they can be used if an encrypted ROM is replaced, or updated by a newer ROM that required userdata formatting.
Sent from my Nexus 9 using Tapatalk
How to flash?
I flashed all of the partitions with the volantis-lrx21r-factory... Then installed TWRP in my recovery partition.
Then I flashed the Boot image Via fastboot. Result is a boot loop at the orb screen.
Can someone please make an actual guide in which order to flash this?
Also, What do I do with all the extra folders along with the .img?
Should I flash it via fastboot or TWRP?
I'm usually pretty capable of doing these kinda things, but I'm stuck with the Stock AOSP, W/ Elementalx 0.08 Kernel.
tyea said:
If I turn encryption back on in the latest 11/28 ROM, will I be able to update to newer versions without formating userdata? I like using custom Roms, but would also like to stay encrypted. It would be nice to be able to use saved TWRP backups on an USB otg device, but I'm not sure they can be used if an encrypted ROM is replaced, or updated by a newer ROM that required userdata formatting.
Sent from my Nexus 9 using Tapatalk
Click to expand...
Click to collapse
If you turn on encryption, it will remain until you format the data partition.
Sent from my Nexus 5
craigacgomez said:
If you turn on encryption, it will remain until you format the data partition.
Sent from my Nexus 5
Click to expand...
Click to collapse
Then all Roms that have the built in 'no encrypt' require formatting user data if coming from an encrypted ROM. If I save a TWRP backup of all partitions of my encrypted stock ROM can I restore back and forth from an encrypted ROM and backup images of unencrypted Roms, or is this process irreversible?
Sent from my Nexus 6 using Tapatalk
armv6 & armv7(question)
is it possible for amrv6 phones to fake and run armv7 apps?
Switch Access
The rom is working great for me, just a quick question about why Switch Access isn't there under accessibility!
Q&A for [ROM][OFFICIAL] CyanogenMod nightly build for the hltespr
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL] CyanogenMod nightly build for the hltespr. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
spr note 3 bootloader upgrade
I have Philz recovery but I'm told I need to upgrade my bootloader to flash CM 12 can someone point me in the right direction to a link or tell me how to do it!!!!
Thanks,
Ned McPherson
nedleray said:
I have Philz recovery but I'm told I need to upgrade my bootloader to flash CM 12 can someone point me in the right direction to a link or tell me how to do it!!!!
Thanks,
Ned McPherson
Click to expand...
Click to collapse
You do not need to, sources have been updated!
Sent from my SM-N900P using Tapatalk
Is WiFi tether working on @ram9200 's build? CNT seem to get it to actually provide data. It connects but not data is shared. Hmm...perhaps I should wait a few more minutes and give temaseks V1 SPR a go.
CM12
Is the latest Nightly cm12 it Starts cm11 ?????
nedleray said:
Is the latest Nightly cm12 it Starts cm11 ?????
Click to expand...
Click to collapse
The newest build is currently temaseks V1. Under his cm12 folder...basket build.
armbarassasin90 said:
Is WiFi tether working on @ram9200 's build? CNT seem to get it to actually provide data. It connects but not data is shared. Hmm...perhaps I should wait a few more minutes and give temaseks V1 SPR a go.
Click to expand...
Click to collapse
Make sure you let us know if it works!
Sent from my SM-N900P using Tapatalk
ram9200 said:
Make sure you let us know if it works!
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Just tested WiFi tether router and it works like a charm.
---------- Post added at 11:20 PM ---------- Previous post was at 10:34 PM ----------
Crap, i lost cellular data lol. I checked and the lte/CDMA auto prl is already set.
Edit: got it back from following the steps provided in the cm thread in the original dev section. Thanks ram.
threestripebrand said:
Just tested WiFi tether router and it works like a charm.
---------- Post added at 11:20 PM ---------- Previous post was at 10:34 PM ----------
Crap, i lost cellular data lol. I checked and the lte/CDMA auto prl is already set.
Edit: got it back from following the steps provided in the cm thread in the original dev section. Thanks ram.
Click to expand...
Click to collapse
How do I flash the cm12. I get an error when flashing
diablo311 said:
How do I flash the cm12. I get an error when flashing
Click to expand...
Click to collapse
Not sure what would have gave you an error, I flashed it like any other ROM and gapps with the latest twrp.
This is what I get
Looks like you're flashing the international version maybe.
---------- Post added at 09:03 PM ---------- Previous post was at 09:02 PM ----------
http://forum.xda-developers.com/showthread.php?p=57134909 download the one ram posted, the media fire link.
Same thing
diablo311 said:
Same thing
Click to expand...
Click to collapse
Lol wipe your data
ram9200 said:
Lol wipe your data
Click to expand...
Click to collapse
Did that.
Everything works just fine
I'm going to use it as a daily
No battery drains
Just the home to wake no work
Is there a way around ?
diablo311 said:
Did that.
Everything works just fine
I'm going to use it as a daily
No battery drains
Just the home to wake no work
Is there a way around ?
Click to expand...
Click to collapse
If I can ever get away from work I'll build as home wake was fixed
http://review.cyanogenmod.org/#/c/79914
Wake home button
CM 12
Hello,
I am trying to flash this build of cm 12 but i get an error in twrp saying that the rom is for hltspr and my device is hlte. Any ideas on how to correct this?
i was recently on the s5 moar port if that might help.
Thanks
Can I get a link to temasek's kernels please or where are they located?
Cannot go into CW recovery mode to load Cyanogenmod
Hi all and thank you for your help in advance.
I have a Note 3 from sprint (SM-N900P) with Android 4.4.4
I have rooted this device via Odin and is tested to be rooted and from Super SU I have disabled Knox
Installed Rom Manager and installed the correct Clockwork-recovery
When I attempt to reboot in recovery I get this message EVERY time
Recovery Booting......
Recovery is not SEANDROID enforcing
Set Warranty bit : recovery
Which does not allow me to do anything other than wait for the reboot or remove the battery.
I recover from this by re-flashing the root ROM form Odin.
Looks to me there is some safe mechanism kicking in here stopping the phone from booting into CW recovery
I tried as well to load CW in download mod from Odin with same results.
Any help will be appreciated
and the phone will do a reboot loop showing this message.
I have read most pages in this post and do not see anyone with this post with no joy.
The purpose of this is to load Cyanogenmod 11 and use this phone with my Canadian carrier.
Thank you
Q&A for [ROM] [Unofficial] [Bliss Pop] [5.0.1 Lollipop] 12-3-14 - [vs985]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [Unofficial] [Bliss Pop] [5.0.1 Lollipop] 12-3-14 - [vs985]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
TWRP vs Phil
I've flashed 3 different releases of 5.0 using TWRP without issue. I initially flashed CM11 and dirty flashed CM12 and everything but video works.
I am having a problem with the Dialer. When I try to type a number in I get a FC when I hit the CALL button. Do you know what might be causing this?
EvilishBob said:
I am having a problem with the Dialer. When I try to type a number in I get a FC when I hit the CALL button. Do you know what might be causing this?
Click to expand...
Click to collapse
New build is up which fixes the issue
oadam11 said:
New build is up which fixes the issue
Click to expand...
Click to collapse
Thank man, you rock! Other than that issue (which unfortunately defeated the whole "phone" thing ), the ROM was amazing. As a side note, I was also getting random system FC's intermittently, which basically soft rebooted the launcher. Though this was manageable, as it was pretty infrequent.
einstein812 said:
I've flashed 3 different releases of 5.0 using TWRP without issue. I initially flashed CM11 and dirty flashed CM12 and everything but video works.
Click to expand...
Click to collapse
Did you use TWRP 2.8.0?
Anyone completely almost brick flashing Bliss Pop 5.0 Lollipop Rom?
Last night I flashed the 12-3 version of the ROM and my G3 kept throwing the error message "Unfortunately setup wizard has stopped working" over and over and over again. Then occasionally it would say "AOSP Keyboard has stopped working". There was no launcher present either-just a blank screen with the Bliss logo.
I could swipe down and get to the menus -but the Wifi and mobile networks weren't connecting.
Trying to reboot manually into TWRP recovery didn't work either-kept rebooting into the rom. I had to ADB sideload to get it to reboot into recovery, then restore my nandroid backup.
I used the Bliss Gapps file provided, although they weren't for 5.0 according to the download, still 4.4.
Could have been a bad flash I guess, but wanted to see if anyone else had that issue.
help
tried flashing the rom dunno what happend phone powered off and now its saying unfrotunatley setup wizard has stopped then unfortunatley android keyboard has stop im trying to boot into recovery mode and it will not for the life of me go into revocery mode plase help..
DCSGS3Guy said:
Last night I flashed the 12-3 version of the ROM and my G3 kept...
I used the Bliss Gapps file provided, although they weren't for 5.0 according to the download, still 4.4.
Could have been a bad flash I guess, but wanted to see if anyone else had that issue.
Click to expand...
Click to collapse
Using 4.4 gapps with a 5.0 ROM will do that. Wipe and reflash with 5m0 gapps and see if that works
Sent from my VS985 4G using XDA Free mobile app
goldsmitht said:
Using 4.4 gapps with a 5.0 ROM will do that. Wipe and reflash with 5m0 gapps and see if that works
Sent from my VS985 4G using XDA Free mobile app
Click to expand...
Click to collapse
Yep. This is most likely the issue. I'll update the op for the lollipop builds to specify that lollipop gapps must be used for it. The gapps that are posted are only for bliss Stalk (kitkat)
help
shadiguy1 said:
tried flashing the rom dunno what happend phone powered off and now its saying unfrotunatley setup wizard has stopped then unfortunatley android keyboard has stop im trying to boot into recovery mode and it will not for the life of me go into revocery mode plase help..
Click to expand...
Click to collapse
Solution for me: Power on by holding power button + volume down, when you see lg logo, release both and then press and hold both again. When boot animation starts, just continue holding and it will boot into recovery.
Question
I successfully flashed this rom with the 5.0 gapps. After playing around with it a bit, I cannot seem to find any of the system apps mentioned in the OP. Should I install again? Also, does the quick circle case work with this rom or other non-stock (LG) roms?
Thank you and the rom is awesome,
Daniel
dkmar_lg said:
I successfully flashed this rom with the 5.0 gapps. After playing around with it a bit, I cannot seem to find any of the system apps mentioned in the OP. Should I install again? Also, does the quick circle case work with this rom or other non-stock (LG) roms?
Thank you and the rom is awesome,
Daniel
Click to expand...
Click to collapse
The system apps mentioned are for blissStalk (the kitkat version). The lollipop build doesn't have all of those apps.
The quick circle case doesn't work on any non stock based ROMs unfortunately. I have the case as well
Advanced Calling
Does this ROM support verizon's new Advanced Calling feature?
Video Codec
When I am using this ROM viewing videos from snapchat don't work. Even of it's my own. Is there a codec I need to download or is this a bug in the ROM?
Seems to happen with most of these. I think its a cm12 issue. I can view but not take vids :/
Dev
In the main thread there was a post for a dev. What would entail doing that? I might be able to help out this ROM, I've been interested in getting into this for a while and I've flashed so much I figure I should give back. Please let me know if you're looking/willing
I'm not sure how I'm missing it but I don't see nav bar color options in bliss interface anywhere... Any help?
Changelog?
If it's not too much to ask, could we get a changelog with new releases?
This is for anyone who can help,is there any way to get the heads up display working on a stock ROM would love to have it so my games wouldn't be interrupted
Q&A for [ROM+KERNEL] Uber CM-12.1---MOTO E [AK Kernel] [GCC 4.8 & 4.8]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM+KERNEL] Uber CM-12.1---MOTO E [AK Kernel] [GCC 4.8 & 4.8]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Play Store FC loop with Slim Mini Gapps.
darshan_dex said:
Play Store FC loop with Slim Mini Gapps.
Click to expand...
Click to collapse
Don't use slim gapps its meant to use with slimroms only i think
Adarsh1998 said:
Don't use slim gapps its meant to use with slimroms only i think
Click to expand...
Click to collapse
Yupp! using with normal gapps now...working perfect!
Adarsh1998 said:
Don't use slim gapps its meant to use with slimroms only i think
Click to expand...
Click to collapse
Why not? That's what I use w/ this ROM on Bacon, and that's what I suggest that people use! What's the issue?
Sent from my Oneplus One using Tapatalk
link Fallen
iyajid said:
link Fallen
Click to expand...
Click to collapse
Fixed.
setup wizard fc
After first boot getting fc on setup wizard.. Can't even skip the step
camper7 said:
After first boot getting fc on setup wizard.. Can't even skip the step
Click to expand...
Click to collapse
You are the first person reporting this. I'm about to push an update right now. Try again with it. Make sure that you do CLEAN flash.
Noob question
Will it be a problem if i clean install it on Kitkat bootloader?
I'm on stock kitkat 4.4.4 unlocked Bootloader
will it cause stucking at bootanimation?
deep1993 said:
Will it be a problem if i clean install it on Kitkat bootloader?
I'm on stock kitkat 4.4.4 unlocked Bootloader
will it cause stucking at bootanimation?
Click to expand...
Click to collapse
I'm not absolutely sure. I don't own this device. Make a backup and give it a try. You can always flash back to your backup/flash the new bootloader. Is there a reason that you don't wanna upgrade the bootloader?
deep1993 said:
Will it be a problem if i clean install it on Kitkat bootloader?
I'm on stock kitkat 4.4.4 unlocked Bootloader
will it cause stucking at bootanimation?
Click to expand...
Click to collapse
many people were having bootloop problem installing any lollipop rom on kitkat bootloader. You can try but if you get bootloop or stuck at bootanimation, try installing cm11 stable build then flash this rom over it(by wiping dalvik cache, cache and data).
Thanks guyez
installing over cm11 will surely solve the issue ?
or is there any way to update bootloader ?
deep1993 said:
Thanks guyez
installing over cm11 will surely solve the issue ?
or is there any way to update bootloader ?
Click to expand...
Click to collapse
only way to update bootloader is to install 5.0.2 soak test zip.You can search in forum
You can't just flash the bootloader with fastboot?
Sent from my Oneplus One using Tapatalk
RobbieL811 r u looking to hide signal icons in wifi
here solution: http://forum.xda-developers.com/showthread.php?t=3086501
this rom suit for moto e xt1022??
Adarsh1998 said:
RobbieL811 r u looking to hide signal icons in wifi
here solution: http://forum.xda-developers.com/showthread.php?t=3086501
Click to expand...
Click to collapse
Yes. I was looking for this! I made a post in his thread. I hope that he has a commit for it.
Stuck in Bootloop
Stuck in boot logo with cm icon and circle flashing in the behind. Please help
I wiped all partitions then installed the last build.
It seems that the new option to hide the network activity arrows doesn't do anything, enven after a reboot.
Everything else works perfectly, thank you for this excellent rom.
Q&A for [ROM][5.0.2][12-04-2015] SlimSaber [UNOFFICIAL SlimLP]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][12-04-2015] SlimSaber [UNOFFICIAL SlimLP]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
nice :good:
Some time ago i was using SlimSaberKat by @fusionjack and later CM11 by @Markox89 as a daily driver. But then the demand for lollopop pushed me forward to leave those great roms.
Currently I am on Omni 5.1 and it is much smoother than 5.0 . SlimLP 5.1 is imo only a matter of time and patience. See this post on slim's google+-page: https://plus.google.com/+SlimromsNet/posts/ffGnX4gXrbN
I will try it when it's ready
when will you go for 5.1
Error while restoring /system
Hello. I stuck on logo and followed the steps to fix it. But now i cant restore my files. Any fix ?
ivelin123 said:
Hello. I stuck on logo and followed the steps to fix it. But now i cant restore my files. Any fix ?
Click to expand...
Click to collapse
Screenshot needed please. What is the actual error displayed when restoring /system? Perhaps you could flash back to android 4.4.4
---------- Post added at 07:27 PM ---------- Previous post was at 07:24 PM ----------
batestota said:
when will you go for 5.1
Click to expand...
Click to collapse
Just give slimroms some time. They haven't updated the base code for a while now (and are still working on 5.1 lollipop), and they are still trying to fix many current issues with slimLP alpha.
The rom not start. I whait 15 minute on the logo, but nothing.
I have use all clean and downloading the rom 2 times..
Memory leak is fixed in latest version?
oczkers said:
Memory leak is fixed in latest version?
Click to expand...
Click to collapse
No, not yet.
TeamViewer
warrior1208,
This rom is awesome, i have one problem, i can´t have acess to TeamViewer Addon, can someone explain to me how i can this addon working to have acess to my cellphone screen?
Thanks.
Regard's,
JASSS
Bug
Enabled device heats up during charging. How to solve this problem?
Best ROM so far
I've been using all of the LP roms from xda section and all of them are still unstable(SlimLP also) but I didn't have any issues with Slimsaber.
Come from JB
Hello my current rom is JB . What do I need to instal before your rom ?
keyboard crashed
Hi!
I migrated from SlimSaber 4.4.4 3.0.80SlimKernel+ (the perfect ROM!) and resized partions (4,5+9). Wiped... wiped..wiped. Clean installation.
Keyboard AOSP doesn't work. TRWP was loosed.
What's wrong?
Thank you.
vitfain said:
Hello my current rom is JB . What do I need to instal before your rom ?
Click to expand...
Click to collapse
You need to have a kitkat compatible recovery, and just follow the steps in the OP. And of course root access
uno mas said:
Hi!
I migrated from SlimSaber 4.4.4 3.0.80SlimKernel+ (the perfect ROM!) and resized partions (4,5+9). Wiped... wiped..wiped. Clean installation.
Keyboard AOSP doesn't work. TRWP was loosed.
What's wrong?
Thank you.
Click to expand...
Click to collapse
I have had this issue once or twice. You can download another keyboard .apk(from market) and put it into /system/app manually using something like root explorer. You will need to set the permissions doing it this way. Or you could try doing a full wipe and reflashing the rom.
The recovery is in the kernel that comes with the rom. If you want TWRP back you would have to flash a custom kernel such as apolo.
PUK
Newest build, but PUK bug is still here. At least for me.
Every time i restart my phone it says sim card is locked. I enter PIN, then the phone asks to enter PUK, after entering PUK it lets me to enter new pin code, which is kind of annoying. Any ideas why this bug still occurs?
Nice ROM!
smason said:
Nice ROM!
Click to expand...
Click to collapse
Thanks! I'll update to 5.1.1 on 6th of June!
Regards!
Xposed will work on 6th build?
@warrior1208 will xposed work on the 6th june build? Because I'm using SlimLP for now because xposed works on it but I want to change to SlimSaberLP but my only concern is if xposed working or not?
akiwiz said:
@warrior1208 will xposed work on the 6th june build? Because I'm using SlimLP for now because xposed works on it but I want to change to SlimSaberLP but my only concern is if xposed working or not?
Click to expand...
Click to collapse
I'll build the ROM tomorrow, will also try XPosed on it. I'll state it in the development thread. See you there tomorrow!
still waiting a new build