Q&A for [ROM][OFFICIAL] CyanogenMod nightly build for the hltespr
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL] CyanogenMod nightly build for the hltespr. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
spr note 3 bootloader upgrade
I have Philz recovery but I'm told I need to upgrade my bootloader to flash CM 12 can someone point me in the right direction to a link or tell me how to do it!!!!
Thanks,
Ned McPherson
nedleray said:
I have Philz recovery but I'm told I need to upgrade my bootloader to flash CM 12 can someone point me in the right direction to a link or tell me how to do it!!!!
Thanks,
Ned McPherson
Click to expand...
Click to collapse
You do not need to, sources have been updated!
Sent from my SM-N900P using Tapatalk
Is WiFi tether working on @ram9200 's build? CNT seem to get it to actually provide data. It connects but not data is shared. Hmm...perhaps I should wait a few more minutes and give temaseks V1 SPR a go.
CM12
Is the latest Nightly cm12 it Starts cm11 ?????
nedleray said:
Is the latest Nightly cm12 it Starts cm11 ?????
Click to expand...
Click to collapse
The newest build is currently temaseks V1. Under his cm12 folder...basket build.
armbarassasin90 said:
Is WiFi tether working on @ram9200 's build? CNT seem to get it to actually provide data. It connects but not data is shared. Hmm...perhaps I should wait a few more minutes and give temaseks V1 SPR a go.
Click to expand...
Click to collapse
Make sure you let us know if it works!
Sent from my SM-N900P using Tapatalk
ram9200 said:
Make sure you let us know if it works!
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Just tested WiFi tether router and it works like a charm.
---------- Post added at 11:20 PM ---------- Previous post was at 10:34 PM ----------
Crap, i lost cellular data lol. I checked and the lte/CDMA auto prl is already set.
Edit: got it back from following the steps provided in the cm thread in the original dev section. Thanks ram.
threestripebrand said:
Just tested WiFi tether router and it works like a charm.
---------- Post added at 11:20 PM ---------- Previous post was at 10:34 PM ----------
Crap, i lost cellular data lol. I checked and the lte/CDMA auto prl is already set.
Edit: got it back from following the steps provided in the cm thread in the original dev section. Thanks ram.
Click to expand...
Click to collapse
How do I flash the cm12. I get an error when flashing
diablo311 said:
How do I flash the cm12. I get an error when flashing
Click to expand...
Click to collapse
Not sure what would have gave you an error, I flashed it like any other ROM and gapps with the latest twrp.
This is what I get
Looks like you're flashing the international version maybe.
---------- Post added at 09:03 PM ---------- Previous post was at 09:02 PM ----------
http://forum.xda-developers.com/showthread.php?p=57134909 download the one ram posted, the media fire link.
Same thing
diablo311 said:
Same thing
Click to expand...
Click to collapse
Lol wipe your data
ram9200 said:
Lol wipe your data
Click to expand...
Click to collapse
Did that.
Everything works just fine
I'm going to use it as a daily
No battery drains
Just the home to wake no work
Is there a way around ?
diablo311 said:
Did that.
Everything works just fine
I'm going to use it as a daily
No battery drains
Just the home to wake no work
Is there a way around ?
Click to expand...
Click to collapse
If I can ever get away from work I'll build as home wake was fixed
http://review.cyanogenmod.org/#/c/79914
Wake home button
CM 12
Hello,
I am trying to flash this build of cm 12 but i get an error in twrp saying that the rom is for hltspr and my device is hlte. Any ideas on how to correct this?
i was recently on the s5 moar port if that might help.
Thanks
Can I get a link to temasek's kernels please or where are they located?
Cannot go into CW recovery mode to load Cyanogenmod
Hi all and thank you for your help in advance.
I have a Note 3 from sprint (SM-N900P) with Android 4.4.4
I have rooted this device via Odin and is tested to be rooted and from Super SU I have disabled Knox
Installed Rom Manager and installed the correct Clockwork-recovery
When I attempt to reboot in recovery I get this message EVERY time
Recovery Booting......
Recovery is not SEANDROID enforcing
Set Warranty bit : recovery
Which does not allow me to do anything other than wait for the reboot or remove the battery.
I recover from this by re-flashing the root ROM form Odin.
Looks to me there is some safe mechanism kicking in here stopping the phone from booting into CW recovery
I tried as well to load CW in download mod from Odin with same results.
Any help will be appreciated
and the phone will do a reboot loop showing this message.
I have read most pages in this post and do not see anyone with this post with no joy.
The purpose of this is to load Cyanogenmod 11 and use this phone with my Canadian carrier.
Thank you
Related
Q&A for [ROM][5.0][Lollipop][Official] NamelessROM 2.0 [ALPHA]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0][Lollipop][Official] NamelessROM 2.0 [ALPHA]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Anyone managed to dual boot it ?
Syden said:
Anyone managed to dual boot it ?
Click to expand...
Click to collapse
@Lukijs did
Syden said:
Anyone managed to dual boot it ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=56742439&postcount=41
I think this ROM is for I9300 and not for the I9305
Lukijs said:
http://forum.xda-developers.com/showpost.php?p=56742439&postcount=41
Click to expand...
Click to collapse
OK, can you please point me to a guide to dual booting. Did you put this ROM as 1st rom or 2nd?
error during instalation
Cannot mount /data device or data are busy ...
Help..
prabhjots said:
OK, can you please point me to a guide to dual booting. Did you put this ROM as 1st rom or 2nd?
Click to expand...
Click to collapse
As you can see in screens, kitkat is 1st and Lollipop is 2nd rom ..go to arter97 kernels thread and check last 2 pages I think, there was guide
rom issue
hi
if i flash rom from recovery, phone always restart and not booting
but if i flash arter kernel phone boots
but statusbar now showing
wifi not connecting
sd card not working
thanks
few problems
There is problem while connecting to a wifi, its not getting connected....
using mobile data which shows connected but unable to load either in web briwser or play store....
but the rom is awesome great work...
fix the issues soon...
---------- Post added at 11:37 AM ---------- Previous post was at 11:32 AM ----------
pouya06 said:
hi
if i flash rom from recover phone always restart and not booting
but if i flash arter kernel phone boots
but statusbar now showing
wifi not connecting
sd card not working
thanks
Click to expand...
Click to collapse
try with stock kernel it will take 5-10 minutes to boot but everything working except networks
Well after reading all the posts I decided to test it. First of all, I'm no developer. Here's what I did;
1. Did "Wipe to install a new ROM" from philz
2. Installed ROM
3. Installed Gapps.
That's pretty much it for everyone who keeps asking how to install it -_- and the first boot took about 10 minutes for some reason.
As for bugs, I still haven't experienced a single issue except for the keyboard problem which I fixed by enabling hardware keyboard from settings. Everything works smooth as silk :')
Just sharing my results because of all the negative posts..
Great work devs!
I tried to install that rom (which looks amazing by the way) but when I reboot my device after install it just shows the bubbles and restarts.
I replaced a recovery (from ClockWorkMod to Philz) but it still exists.
what can I do?
Thanks.
mohitc6 said:
There is problem while connecting to a wifi, its not getting connected....
using mobile data which shows connected but unable to load either in web briwser or play store....
but the rom is awesome great work...
fix the issues soon...
---------- Post added at 11:37 AM ---------- Previous post was at 11:32 AM ----------
try with stock kernel it will take 5-10 minutes to boot but everything working except networks
Click to expand...
Click to collapse
i do this , but not work at all!
phone just shows the bubbles and restarts
found a slove, download arter97 kernel (5.0 version) and flash it after installing the rom and gapps.
TheAia said:
found a slove, download arter97 kernel (5.0 version) and flash it after installing the rom and gapps.
Click to expand...
Click to collapse
That works too but I don't know I didn't have to flash his kernel. I just installed the ROM and the default kernel it came with :/ Glad it's working for you :3
Still can't have the Wi-Fi working.
Sent from my GT-I9300 using XDA Free mobile app
I gave up trying after my battery became near empty from 90%. I am getting home screen without status bar and lockscreen if i flash with arter's kernel otherwise just bubbles and bootloop. Few managed to getting the rom work, Does previous rom and recovery(i am using latest twrp) have anything to do with this?
problem
hi what can i do i have boot loop in boot animation?
Lukijs said:
http://forum.xda-developers.com/showpost.php?p=56742439&postcount=41
Click to expand...
Click to collapse
Hi,
Can I dual boot this with s5 mini v6.1 (TouchWiz android 4.4 4) using arter kernel ?
When flashing I get error sth like : cannot mount ext4 .... device or file busy .
Q&A for [ROM][11/20][CM12][UNOFFICIAL][geeb]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][11/20][CM12][UNOFFICIAL][geeb]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
wifi mac address changed after using cm 12 unofficial
CAN SOMEBODY HELP please
when i use this rom i can not use my hostel wifi because of mac filtering in my college as after installing this rom my mac address changes....this problem is also there on new builts of pa rom by their legacy team. wifi works on router's without mac filtering..pls help me solve the issue.This issue is not there on cm 11 kitkat official builds.
Rotation on E970 CM12
anyone having trouble with the rotation?
jo_ching said:
anyone having trouble with the rotation?
Click to expand...
Click to collapse
It works for me. I'm on e970 with the at&t jellybean radio.
Thanks
brothaedhung said:
It works for me. I'm on e970 with the at&t jellybean radio.
Click to expand...
Click to collapse
Ok, then flash it again, maybe this fix it.
Rotation still not work
Rotation still not work, what can i do? thanks for your help
jo_ching said:
Rotation still not work, what can i do? thanks for your help
Click to expand...
Click to collapse
What phone and radio are you on?
Rotation still not work
brothaedhung said:
What phone and radio are you on?
Click to expand...
Click to collapse
My Phone is E970 At&t and my radio and dont know what is that... sorry and thanks for your help
jo_ching said:
My Phone is E970 At&t and my radio and dont know what is that... sorry and thanks for your help
Click to expand...
Click to collapse
There's two potential reasons IMO. There's historically been issues with rotation when you're not using the AT&T jellybean radio. The other is the sensors randomly failing for unknown reasons. Try flashing the radio from my PAC thread first.
Mine also had the issue. Main development section one was complaining
When he flashed again all sensors stopped working. Try formatting system and flash again. . BTW I was with stock jb radio. Edited..
Alfas Muhammed said:
Mine also had the issue. Main development section one was complaining
When he flashed again all sensors stopped working. Try formatting system and flash again. . BTW I was with stock jb radio. Edited..
Click to expand...
Click to collapse
Did formatting and flashing fix sensors? I'm seeing the same issue in threads for other mako based lollipop OG builds.
please add 2g, 3g', 2g/3g toggle
Hi this is a request to main developer of this cm12 ROM . in future please add 2g/ 3g, 2g, 3g toggles and other useful toggles in status bar, they are of most importance since my area 3g is too weak, 2g sucks to the core. And the ROM looks bare minimum. May be I am asking
Too much an it has to more with cm12 source
---------- Post added at 06:40 AM ---------- Previous post was at 06:34 AM ----------
brothaedhung said:
Did formatting and flashing fix sensors? I'm seeing the same issue in threads for other mako based lollipop OG builds.
Click to expand...
Click to collapse
No I didn't try it, as I came back to cm11. But I will try it right now
Will give you feedback
Alfas Muhammed said:
Hi this is a request to main developer of this cm12 ROM . in future please add 2g/ 3g, 2g, 3g toggles and other useful toggles in status bar, they are of most importance since my area 3g is too weak, 2g sucks to the core. And the ROM looks bare minimum. May be I am asking
Too much an it has to more with cm12 source
---------- Post added at 06:40 AM ---------- Previous post was at 06:34 AM ----------
No I didn't try it, as I came back to cm11. But I will try it right now
Will give you feedback
Click to expand...
Click to collapse
We have to wait for CM for toggles. Not a device issue. Use the cellular network settings for now.
Tried flashing with wiping system and everything. But no luck , may be it has to do with the radio, and thanks for the quick reply
Rotation
brothaedhung said:
There's two potential reasons IMO. There's historically been issues with rotation when you're not using the AT&T jellybean radio. The other is the sensors randomly failing for unknown reasons. Try flashing the radio from my PAC thread first.
Click to expand...
Click to collapse
Ok, Now i understand, thanks for your help and for the time to answer me.
sensors are working
I flushed stock jb radio zip and surprisingly my sensors are working , don't know the exact reason I was playing with hybr radios and none of them was giving signals. So in order to return I flashed the stock jb cwm zip and sensors are now working . will check for other sensors
RADIO
brothaedhung said:
There's two potential reasons IMO. There's historically been issues with rotation when you're not using the AT&T jellybean radio. The other is the sensors randomly failing for unknown reasons. Try flashing the radio from my PAC thread first.
Click to expand...
Click to collapse
Excuse me for asking so much, but I can not find the first thread where is that file, you help me?
---------- Post added at 10:24 PM ---------- Previous post was at 10:18 PM ----------
Alfas Muhammed said:
I flushed stock jb radio zip and surprisingly my sensors are working , don't know the exact reason I was playing with hybr radios and none of them was giving signals. So in order to return I flashed the stock jb cwm zip and sensors are now working . will check for other sensors
Click to expand...
Click to collapse
I can not find that file, you help me?
It is in the optimus g general section as RADIO ATT JB e97020j
Just a quick questions. Is there external SD card support? Thanks
optimisandroid said:
Just a quick questions. Is there external SD card support? Thanks
Click to expand...
Click to collapse
Yeah..
Q&A for CyanogenMod 12.0 near final nightly build for hltespr! 12/31/2014
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for CyanogenMod 12.0 near final nightly build for hltespr! 12/31/2014. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Ting SMS and Data Issue CM12 Nightly 12-31-2014
I just flashed noobnl's latest update (downloaded 01-01-2014), but have an issue connecting to Ting cell SMS and data network.
I believe the issue may have something to do with missing LTE/APN information.
I tried a CM11 LTE/APN fix from the Ting help forums, but still no luck.
SM-N900P | NH7
@mattboroi Where did you find the download links for the latest nightly?
Thanks
TrofeoSC said:
@mattboroi Where did you find the download links for the latest nightly?
Thanks
Click to expand...
Click to collapse
I pulled it down from Mega via noobnl's main post under discussion.
mega.co.nz/#!u48UUbTD!Nf5ItMu_nZS6pRY-q6md7aib_rgv6L3IwIvIzU0jFTU
Thanks @TrofeoSC
I updated my baseband to NK4 as an additional test, but am still having an issue. [attachment]
CyanogenMod 12.0 near final nightly build for hltespr! 12/31/2014
(I've less than 10 posts, it seems)
Aboit the only thing I've seen not working with this rom is that nextfm won't run. Cheers
Any one else having an echo during call problem? I tried using fb messenger for call and it did the same thing
DutchBro said:
Any one else having an echo during call problem? I tried using fb messenger for call and it did the same thing
Click to expand...
Click to collapse
There is a post in the cm12 dev section talking about this and a fix.
Go to this post http://forum.xda-developers.com/showpost.php?p=57938833&postcount=48
I hope that works for you.
jdelano said:
There is a post in the cm12 dev section talking about this and a fix.
Go to this post http://forum.xda-developers.com/showpost.php?p=57938833&postcount=48
I hope that works for you.
Click to expand...
Click to collapse
After doing this i lost all use of speakers and mic
DutchBro said:
After doing this i lost all use of speakers and mic
Click to expand...
Click to collapse
Sorry to hear that, just dirty flash the rom again, did you try wiping cache and rebooting?
You should also post in the dev thread as well, I just recalled reading that over there.
I don't think so
That appears to be an update package for a system package. It won't work as a fresh
rogerandgina said:
View attachment 3100401
Click to expand...
Click to collapse
install
Still having the same echo problem, I tried flashing a mixer path from the 9005 but no luck there either
It won't run I've tried everything to get that running
---------- Post added at 04:22 AM ---------- Previous post was at 04:20 AM ----------
I never get signal on cm only older version
Q&A for [ROM][5.0.2][12-04-2015] SlimSaber [UNOFFICIAL SlimLP]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][12-04-2015] SlimSaber [UNOFFICIAL SlimLP]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
nice :good:
Some time ago i was using SlimSaberKat by @fusionjack and later CM11 by @Markox89 as a daily driver. But then the demand for lollopop pushed me forward to leave those great roms.
Currently I am on Omni 5.1 and it is much smoother than 5.0 . SlimLP 5.1 is imo only a matter of time and patience. See this post on slim's google+-page: https://plus.google.com/+SlimromsNet/posts/ffGnX4gXrbN
I will try it when it's ready
when will you go for 5.1
Error while restoring /system
Hello. I stuck on logo and followed the steps to fix it. But now i cant restore my files. Any fix ?
ivelin123 said:
Hello. I stuck on logo and followed the steps to fix it. But now i cant restore my files. Any fix ?
Click to expand...
Click to collapse
Screenshot needed please. What is the actual error displayed when restoring /system? Perhaps you could flash back to android 4.4.4
---------- Post added at 07:27 PM ---------- Previous post was at 07:24 PM ----------
batestota said:
when will you go for 5.1
Click to expand...
Click to collapse
Just give slimroms some time. They haven't updated the base code for a while now (and are still working on 5.1 lollipop), and they are still trying to fix many current issues with slimLP alpha.
The rom not start. I whait 15 minute on the logo, but nothing.
I have use all clean and downloading the rom 2 times..
Memory leak is fixed in latest version?
oczkers said:
Memory leak is fixed in latest version?
Click to expand...
Click to collapse
No, not yet.
TeamViewer
warrior1208,
This rom is awesome, i have one problem, i can´t have acess to TeamViewer Addon, can someone explain to me how i can this addon working to have acess to my cellphone screen?
Thanks.
Regard's,
JASSS
Bug
Enabled device heats up during charging. How to solve this problem?
Best ROM so far
I've been using all of the LP roms from xda section and all of them are still unstable(SlimLP also) but I didn't have any issues with Slimsaber.
Come from JB
Hello my current rom is JB . What do I need to instal before your rom ?
keyboard crashed
Hi!
I migrated from SlimSaber 4.4.4 3.0.80SlimKernel+ (the perfect ROM!) and resized partions (4,5+9). Wiped... wiped..wiped. Clean installation.
Keyboard AOSP doesn't work. TRWP was loosed.
What's wrong?
Thank you.
vitfain said:
Hello my current rom is JB . What do I need to instal before your rom ?
Click to expand...
Click to collapse
You need to have a kitkat compatible recovery, and just follow the steps in the OP. And of course root access
uno mas said:
Hi!
I migrated from SlimSaber 4.4.4 3.0.80SlimKernel+ (the perfect ROM!) and resized partions (4,5+9). Wiped... wiped..wiped. Clean installation.
Keyboard AOSP doesn't work. TRWP was loosed.
What's wrong?
Thank you.
Click to expand...
Click to collapse
I have had this issue once or twice. You can download another keyboard .apk(from market) and put it into /system/app manually using something like root explorer. You will need to set the permissions doing it this way. Or you could try doing a full wipe and reflashing the rom.
The recovery is in the kernel that comes with the rom. If you want TWRP back you would have to flash a custom kernel such as apolo.
PUK
Newest build, but PUK bug is still here. At least for me.
Every time i restart my phone it says sim card is locked. I enter PIN, then the phone asks to enter PUK, after entering PUK it lets me to enter new pin code, which is kind of annoying. Any ideas why this bug still occurs?
Nice ROM!
smason said:
Nice ROM!
Click to expand...
Click to collapse
Thanks! I'll update to 5.1.1 on 6th of June!
Regards!
Xposed will work on 6th build?
@warrior1208 will xposed work on the 6th june build? Because I'm using SlimLP for now because xposed works on it but I want to change to SlimSaberLP but my only concern is if xposed working or not?
akiwiz said:
@warrior1208 will xposed work on the 6th june build? Because I'm using SlimLP for now because xposed works on it but I want to change to SlimSaberLP but my only concern is if xposed working or not?
Click to expand...
Click to collapse
I'll build the ROM tomorrow, will also try XPosed on it. I'll state it in the development thread. See you there tomorrow!
still waiting a new build
This is an old post, please, refer to this one for new updates, this is here only for historical purposes
http://forum.xda-developers.com/note-4/snapdragon-dev/unofficial-cm13-0-910f-g-t3280529
Quite a few people asked for test driving CM13.0/marshmellow. However since a lot of stuff was broken, we felt it didnt make much sense to put a flashable ROM out there. But a lot of progress has been made and the basic functionality (more or less) seems to work now, so I thought let's open a thread where people can dump their unofficial Cm13.0 versions for others to try.
If you want a stable version, use the official Cm12.1: http://forum.xda-developers.com/note-4/orig-development/official-cm12-910f-910g-t3046965
This thread will be active untill we feel it's stable enough to make it official.
XDA:DevDB Information
Unofficial CM13.0 910F/G, ROM for the Samsung Galaxy Note 4
Contributors
gekkehenkie11, fattire
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Beta
Created 2015-11-07
Last Updated 2015-11-07
Notes:
1) Make sure you are on COI3 bootloader and modem
Installation instructions:
1) You'll probably want to backup your exisiting installation with TWRP
2) Do a full factory reset
3) Flash this ROM:https://mega.nz/#!LcYkjDgA!e_wG4Cn0hoLeZOy6hHsSUeuOfKuPcxsY-QXnngP7F7o
4) Flash these blobs https://mega.nz/#!CFxUBDxb!QET17v0B-1ana-VQ_EnGzH7RnUZ-vyCHGaGVdV6Ih6M
5) Flash these gapps: https://www.androidfilehost.com/?fid=24052804347844834
If other people upload a ROM, you most likely do NOT have to flash blobs. I just have it seperately but in my next ROM it will probably be included too. So if somebody posts a ROM, all you need is that ROM and gapps.
If you want to build it yourself, @fattire wrote this wonderful tutorial: http://forum.xda-developers.com/not...-910f-910g-t3046965/post63488099#post63488099
Other notes:
* You guys might want to try the Marshmellow multi window mode ! Enable it in the developer options. Once enabled, go to the recent apps and press the symbol next to the X for windows you want.
* You'll probably want to enable MTP over USB by default, also in developer options
* Enable root also, again, via developer options.
Known bugs/problems
* Finger print scanner is not up yet (we'll give it a shot soon)
* I've seen some battery drains, not sure if they still persist, I expect they do.
* NFC not working
* Probably a lot more
KEEP IN MIND THAT THIS IS STILL HIGHLY EXPERIMENTAL AND NOT MEANT TO BE A DAILY DRIVER FOR THE AVERAGE USER AT THIS POINT
*reserved*
I can't wait to test it, thank you both
Thanks gekke. Just not blobs to DL but Gapps .
BTW, while installing myself, I got a FC error regarding the play services. After a reboot it worked fine though. Keep in mind that this still is far from stable But I'm using it as a daily driver myself already
Great to have this!!!
itskapil said:
Great to have this!!!
Click to expand...
Click to collapse
Enjoy ! And dont forget to try the Marshmellow multi window mode, see 1st post
Just found that screen won't turn off during call, otherwise is great
Downloading now, thanks @gekkehenkie11
Did I just mentioned how awesome this is, great job
can't flash cm13. It just restarts TWRP. N910f.
Motawa88 said:
can't flash cm13. It just restarts TWRP. N910f.
Click to expand...
Click to collapse
You did do a factory reset as described in the first post?
Wow cm13 is so so awesome, super-fast , couldnt get mobile data and apn settings crashed on 910G (COH4) ,Patiently waiting for it.
. Anyhow thanks for the awesome work guys ??
gekkehenkie11 said:
You did do a factory reset as described in the first post?
Click to expand...
Click to collapse
of course. It says no md5, skipping and then crash/reboot TWRP.
or do i have to do a complete restore via odin(with stock rom)?
Motawa88 said:
of course. It says no md5, skipping and then crash/reboot TWRP.
or do i have to do a complete restore via odin(with stock rom)?
Click to expand...
Click to collapse
I think when it complains about md5 that either it wasn't downloaded correctly or wasn't copied correctly to your phone
Motawa88 said:
of course. It says no md5, skipping and then crash/reboot TWRP.
or do i have to do a complete restore via odin(with stock rom)?
Click to expand...
Click to collapse
Maybe a corrupted download , because it flashes just fine here on TWRP
Senthil360 said:
Maybe a corrupted download , because it flashes just fine here on TWRP
Click to expand...
Click to collapse
It worked after recopying it.
---------- Post added at 09:41 PM ---------- Previous post was at 09:29 PM ----------
what about Google Now on Tap? long pressing home just opens recents.
I think there is some battery drain caused by the cellular network always trying to find LTE, since you're not in LTE area and can't select wcdma/gsm only
---------- Post added at 08:56 PM ---------- Previous post was at 08:41 PM ----------
Motawa88 said:
It worked after recopying it.
---------- Post added at 09:41 PM ---------- Previous post was at 09:29 PM ----------
what about Google Now on Tap? long pressing home just opens recents.
Click to expand...
Click to collapse
I think now on tap is not working yet
Won't work on the N910W8 model. Error executing updater binary. FYI for those that wanted to try this with that model.
mikimadm3 said:
I think there is some battery drain caused by the cellular network always trying to find LTE, since you're not in LTE area and can't select wcdma/gsm
Click to expand...
Click to collapse
Cellular standby drains battery, something not good there indeed.