Q&A for [ROM][11/20][CM12][UNOFFICIAL][geeb]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][11/20][CM12][UNOFFICIAL][geeb]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
wifi mac address changed after using cm 12 unofficial
CAN SOMEBODY HELP please
when i use this rom i can not use my hostel wifi because of mac filtering in my college as after installing this rom my mac address changes....this problem is also there on new builts of pa rom by their legacy team. wifi works on router's without mac filtering..pls help me solve the issue.This issue is not there on cm 11 kitkat official builds.
Rotation on E970 CM12
anyone having trouble with the rotation?
jo_ching said:
anyone having trouble with the rotation?
Click to expand...
Click to collapse
It works for me. I'm on e970 with the at&t jellybean radio.
Thanks
brothaedhung said:
It works for me. I'm on e970 with the at&t jellybean radio.
Click to expand...
Click to collapse
Ok, then flash it again, maybe this fix it.
Rotation still not work
Rotation still not work, what can i do? thanks for your help
jo_ching said:
Rotation still not work, what can i do? thanks for your help
Click to expand...
Click to collapse
What phone and radio are you on?
Rotation still not work
brothaedhung said:
What phone and radio are you on?
Click to expand...
Click to collapse
My Phone is E970 At&t and my radio and dont know what is that... sorry and thanks for your help
jo_ching said:
My Phone is E970 At&t and my radio and dont know what is that... sorry and thanks for your help
Click to expand...
Click to collapse
There's two potential reasons IMO. There's historically been issues with rotation when you're not using the AT&T jellybean radio. The other is the sensors randomly failing for unknown reasons. Try flashing the radio from my PAC thread first.
Mine also had the issue. Main development section one was complaining
When he flashed again all sensors stopped working. Try formatting system and flash again. . BTW I was with stock jb radio. Edited..
Alfas Muhammed said:
Mine also had the issue. Main development section one was complaining
When he flashed again all sensors stopped working. Try formatting system and flash again. . BTW I was with stock jb radio. Edited..
Click to expand...
Click to collapse
Did formatting and flashing fix sensors? I'm seeing the same issue in threads for other mako based lollipop OG builds.
please add 2g, 3g', 2g/3g toggle
Hi this is a request to main developer of this cm12 ROM . in future please add 2g/ 3g, 2g, 3g toggles and other useful toggles in status bar, they are of most importance since my area 3g is too weak, 2g sucks to the core. And the ROM looks bare minimum. May be I am asking
Too much an it has to more with cm12 source
---------- Post added at 06:40 AM ---------- Previous post was at 06:34 AM ----------
brothaedhung said:
Did formatting and flashing fix sensors? I'm seeing the same issue in threads for other mako based lollipop OG builds.
Click to expand...
Click to collapse
No I didn't try it, as I came back to cm11. But I will try it right now
Will give you feedback
Alfas Muhammed said:
Hi this is a request to main developer of this cm12 ROM . in future please add 2g/ 3g, 2g, 3g toggles and other useful toggles in status bar, they are of most importance since my area 3g is too weak, 2g sucks to the core. And the ROM looks bare minimum. May be I am asking
Too much an it has to more with cm12 source
---------- Post added at 06:40 AM ---------- Previous post was at 06:34 AM ----------
No I didn't try it, as I came back to cm11. But I will try it right now
Will give you feedback
Click to expand...
Click to collapse
We have to wait for CM for toggles. Not a device issue. Use the cellular network settings for now.
Tried flashing with wiping system and everything. But no luck , may be it has to do with the radio, and thanks for the quick reply
Rotation
brothaedhung said:
There's two potential reasons IMO. There's historically been issues with rotation when you're not using the AT&T jellybean radio. The other is the sensors randomly failing for unknown reasons. Try flashing the radio from my PAC thread first.
Click to expand...
Click to collapse
Ok, Now i understand, thanks for your help and for the time to answer me.
sensors are working
I flushed stock jb radio zip and surprisingly my sensors are working , don't know the exact reason I was playing with hybr radios and none of them was giving signals. So in order to return I flashed the stock jb cwm zip and sensors are now working . will check for other sensors
RADIO
brothaedhung said:
There's two potential reasons IMO. There's historically been issues with rotation when you're not using the AT&T jellybean radio. The other is the sensors randomly failing for unknown reasons. Try flashing the radio from my PAC thread first.
Click to expand...
Click to collapse
Excuse me for asking so much, but I can not find the first thread where is that file, you help me?
---------- Post added at 10:24 PM ---------- Previous post was at 10:18 PM ----------
Alfas Muhammed said:
I flushed stock jb radio zip and surprisingly my sensors are working , don't know the exact reason I was playing with hybr radios and none of them was giving signals. So in order to return I flashed the stock jb cwm zip and sensors are now working . will check for other sensors
Click to expand...
Click to collapse
I can not find that file, you help me?
It is in the optimus g general section as RADIO ATT JB e97020j
Just a quick questions. Is there external SD card support? Thanks
optimisandroid said:
Just a quick questions. Is there external SD card support? Thanks
Click to expand...
Click to collapse
Yeah..
Related
Q&A for [DEV][Galaxy Light][SGH-T399] CyanogenMod Porting
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DEV][Galaxy Light][SGH-T399] CyanogenMod Porting. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Galaxy Light T399
Hello there does any one else have a flashable ROM that works with my model? I prefer Cyanogen Mod or some kind of KitKat based rom. This would be greatly appreciated thank you
Tyler Tigner said:
Hello there does any one else have a flashable ROM that works with my model? I prefer Cyanogen Mod or some kind of KitKat based rom. This would be greatly appreciated thank you
Click to expand...
Click to collapse
Would help to know what ur model is tmobile or metro lol
Galaxy Light T399
josh2020glacier said:
Would help to know what ur model is tmobile or metro lol
Click to expand...
Click to collapse
Its a T-Mobile Galaxy Light SGH-T399
what about adding those lines?
Is it dead?
wow glad to see some work on this phone
Might be a dumb question but will this cm 11 rom when completed work on the T-Mobile version of this phone which I own. Thanks for your hard work.
killnfield said:
Might be a dumb question but will this cm 11 rom when completed work on the T-Mobile version of this phone which I own. Thanks for your hard work.
Click to expand...
Click to collapse
Yes
Thanks for the quick response
Tested the CM 12 Beta
Looks good and so smooth. Could not test all that much but was fast and effective. Audio and video playback locally were great. I could not get it to root... but I am a newbie with android cmw and rooting.
Big Thanks for all your hard work.
battery increase?
Have you used it long enough to notice a battery life difference?
Looking Good Guys
Just realized I don't have enough posts to post in the dev section. Tested out the December 8th Build. Data works well. WiFi is strong and good range. Install gapps for fun. All worked well. Bench marked it for 21704. Tested local video and audio. Tested steaming multimedia. Worked great., Smooth as pie. As soon as calling is added I will be running this daily. Thanks for all your hard work guys. I was about to give up on this phone and move on to something else. There was allot more hidden potential then I though there was performance wise.
---------- Post added at 04:46 PM ---------- Previous post was at 04:41 PM ----------
Edwith1d said:
Have you used it long enough to notice a battery life difference?
Click to expand...
Click to collapse
It can't make calls on it right now so I flashed and played around with it for a few hours then have to restore back to my lightwave OS. It's my daily driver right now.
Battery seems ok I did not notice and significant drain while using. I will know more ounce I can run it a few days in a row once calling gets fixed.
As far as I know this is the only current Development on this phone. There is nothing stable yet as far as I know or maybe polished is a better word for it. This just started getting worked on recently I believe @root@ and Unjustified Dev are the current dev's on this project. The Cyanogenmod that is currently being worked on is unified and can be ran on either Metro-PCs or T-mobile. Now I am very new at this but from reading the posts that was my conclusion. I could be wrong. This is all Beta right now, but the rom did seem stable and very very smooth and fast compared to the light-wave and stock roms. Hope this helps. I was actually going to give up on the phone. Thanks to the Dev's for breathing new life into an underachieving phone.
ClockworkMod or TWRP?
First, I want to say thank you to the devs for donating their time and efforts for the good of us poor SGH-T399 users. We still see enormous potential for this wonderful LTE phone to finally enjoy pure Android.
I am using a Odin-installed Shabby Penguin ROM on T-Mobile.
Baseband: T399UVUAMJ4
Kernal: 3.4.39
Build: jdq39.t399uvuamj4
CWM Recovery: 6.0.3.7
Long story short: Do I have to use TWRP to start testing this port, or can I possibly flash with CWM? I am a QA Engineer by trade, so I would love to lend as much effort as possible to the cause!
chapsushi said:
First, I want to say thank you to the devs for donating their time and efforts for the good of us poor SGH-T399 users. We still see enormous potential for this wonderful LTE phone to finally enjoy pure Android.
I am using a Odin-installed Shabby Penguin ROM on T-Mobile.
Baseband: T399UVUAMJ4
Kernal: 3.4.39
Build: jdq39.t399uvuamj4
CWM Recovery: 6.0.3.7
Long story short: Do I have to use TWRP to start testing this port, or can I possibly flash with CWM? I am a QA Engineer by trade, so I would love to lend as much effort as possible to the cause!
Click to expand...
Click to collapse
U need twrp for this cyanogenmod rom if you scroll back a few post you will see link for the version twrp that you need
josh2020glacier said:
U need twrp for this cyanogenmod rom if you scroll back a few post you will see link for the version twrp that you need
Click to expand...
Click to collapse
Thank you sir. I assume you are referring to the TWRP posted by @root@ here?
chapsushi said:
Thank you sir. I assume you are referring to the TWRP posted by @root@ here?
Click to expand...
Click to collapse
No from here
New build now compatible with new TWRP
http://d-h.st/k8u5
josh2020glacier said:
No from here
New build now compatible with new TWRP
(URL redacted since I'm not allowed to post them yet)
Click to expand...
Click to collapse
Sorry to pester, but the link above is a download for cm-12-20141209-UNOFFICIAL-gardalte.zip. That's the actual CyanogenMod 12 ROM, no? I was hoping to get a link to download the new version of Team Win Recovery Project.
chapsushi said:
Sorry to pester, but the link above is a download for cm-12-20141209-UNOFFICIAL-gardalte.zip. That's the actual CyanogenMod 12 ROM, no? I was hoping to get a link to download the new version of Team Win Recovery Project.
Click to expand...
Click to collapse
Sorry here you go lol
http://forum.xda-developers.com/showthread.php?t=2924604
josh2020glacier said:
No from here
New build now compatible with new TWRP
http://d-h.st/k8u5
Click to expand...
Click to collapse
josh2020glacier said:
Sorry here you go lol
http://forum.xda-developers.com/showthread.php?t=2924604
Click to expand...
Click to collapse
Thank you sir! I have installed the latest TWRP (via Flashify) and I was able to successfully flash to CM12 Lollipop (12-20141209-UNOFFICIAL-gardalte).
Wifi is working, but no data. Camera works, but images are not saved. So snappy, though!
Do we have a more stable CM11 KitKat build with gapps? I looked at the beginning of the Discussion thread and saw links to github, but I was confused as to where to start. Any help would be appreciated.
Q&A for [ROM][OFFICIAL] CyanogenMod nightly build for the hltespr
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL] CyanogenMod nightly build for the hltespr. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
spr note 3 bootloader upgrade
I have Philz recovery but I'm told I need to upgrade my bootloader to flash CM 12 can someone point me in the right direction to a link or tell me how to do it!!!!
Thanks,
Ned McPherson
nedleray said:
I have Philz recovery but I'm told I need to upgrade my bootloader to flash CM 12 can someone point me in the right direction to a link or tell me how to do it!!!!
Thanks,
Ned McPherson
Click to expand...
Click to collapse
You do not need to, sources have been updated!
Sent from my SM-N900P using Tapatalk
Is WiFi tether working on @ram9200 's build? CNT seem to get it to actually provide data. It connects but not data is shared. Hmm...perhaps I should wait a few more minutes and give temaseks V1 SPR a go.
CM12
Is the latest Nightly cm12 it Starts cm11 ?????
nedleray said:
Is the latest Nightly cm12 it Starts cm11 ?????
Click to expand...
Click to collapse
The newest build is currently temaseks V1. Under his cm12 folder...basket build.
armbarassasin90 said:
Is WiFi tether working on @ram9200 's build? CNT seem to get it to actually provide data. It connects but not data is shared. Hmm...perhaps I should wait a few more minutes and give temaseks V1 SPR a go.
Click to expand...
Click to collapse
Make sure you let us know if it works!
Sent from my SM-N900P using Tapatalk
ram9200 said:
Make sure you let us know if it works!
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Just tested WiFi tether router and it works like a charm.
---------- Post added at 11:20 PM ---------- Previous post was at 10:34 PM ----------
Crap, i lost cellular data lol. I checked and the lte/CDMA auto prl is already set.
Edit: got it back from following the steps provided in the cm thread in the original dev section. Thanks ram.
threestripebrand said:
Just tested WiFi tether router and it works like a charm.
---------- Post added at 11:20 PM ---------- Previous post was at 10:34 PM ----------
Crap, i lost cellular data lol. I checked and the lte/CDMA auto prl is already set.
Edit: got it back from following the steps provided in the cm thread in the original dev section. Thanks ram.
Click to expand...
Click to collapse
How do I flash the cm12. I get an error when flashing
diablo311 said:
How do I flash the cm12. I get an error when flashing
Click to expand...
Click to collapse
Not sure what would have gave you an error, I flashed it like any other ROM and gapps with the latest twrp.
This is what I get
Looks like you're flashing the international version maybe.
---------- Post added at 09:03 PM ---------- Previous post was at 09:02 PM ----------
http://forum.xda-developers.com/showthread.php?p=57134909 download the one ram posted, the media fire link.
Same thing
diablo311 said:
Same thing
Click to expand...
Click to collapse
Lol wipe your data
ram9200 said:
Lol wipe your data
Click to expand...
Click to collapse
Did that.
Everything works just fine
I'm going to use it as a daily
No battery drains
Just the home to wake no work
Is there a way around ?
diablo311 said:
Did that.
Everything works just fine
I'm going to use it as a daily
No battery drains
Just the home to wake no work
Is there a way around ?
Click to expand...
Click to collapse
If I can ever get away from work I'll build as home wake was fixed
http://review.cyanogenmod.org/#/c/79914
Wake home button
CM 12
Hello,
I am trying to flash this build of cm 12 but i get an error in twrp saying that the rom is for hltspr and my device is hlte. Any ideas on how to correct this?
i was recently on the s5 moar port if that might help.
Thanks
Can I get a link to temasek's kernels please or where are they located?
Cannot go into CW recovery mode to load Cyanogenmod
Hi all and thank you for your help in advance.
I have a Note 3 from sprint (SM-N900P) with Android 4.4.4
I have rooted this device via Odin and is tested to be rooted and from Super SU I have disabled Knox
Installed Rom Manager and installed the correct Clockwork-recovery
When I attempt to reboot in recovery I get this message EVERY time
Recovery Booting......
Recovery is not SEANDROID enforcing
Set Warranty bit : recovery
Which does not allow me to do anything other than wait for the reboot or remove the battery.
I recover from this by re-flashing the root ROM form Odin.
Looks to me there is some safe mechanism kicking in here stopping the phone from booting into CW recovery
I tried as well to load CW in download mod from Odin with same results.
Any help will be appreciated
and the phone will do a reboot loop showing this message.
I have read most pages in this post and do not see anyone with this post with no joy.
The purpose of this is to load Cyanogenmod 11 and use this phone with my Canadian carrier.
Thank you
Q&A for Just5 Blaster Development thread
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Just5 Blaster Development thread. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
gleam2003 said:
I need blaster firmware, anyone van help me?
Click to expand...
Click to collapse
me too
Kernel
Hey Niks!
Can you upload your boot.img from Just5 Blaster?
I want to try in my Zoppo port.
Maybe run wake gestures changing the kernel.
Wait.. Why i just find about this thread? Alright then you can find my backup in development thread. If you need something else ask here I suppose.
*Note to Admin* it would be great that you notify Devs or Contributors first before making these threads. Thank you for understanding.
has anyone tried this firmware?
bbs.elephone. hk/thread-4730-1-1.html
can't post links, since I have <10 posts
Some Devil said:
has anyone tried this firmware?
bbs.elephone. hk/thread-4730-1-1.html
can't post links, since I have <10 posts
Click to expand...
Click to collapse
Vibe ui? it's good, although i prefered stock 5.0, this one is the best from all three ported Vibe ui roms.
http://bbs.elephone.hk/thread-4436-1-1.html#.VWHDS0_tmko
Installed the one I posted link to, works like a charm.
P.S. I had stock 5.0 and it had some glitches/screen flickered, vibe 2.5 tho doesn't have these bugs (atleast after few hours of testing)
Some Devil said:
Installed the one I posted link to, works like a charm.
P.S. I had stock 5.0 and it had some glitches/screen flickered, vibe 2.5 tho doesn't have these bugs (atleast after few hours of testing)
Click to expand...
Click to collapse
Hmm? Your Blaster came with official 5.0? or you flashed it?
NiksSkersts said:
Hmm? Your Blaster came with official 5.0? or you flashed it?
Click to expand...
Click to collapse
I flashed it (P6000 5.0 official ROM) from link in your main post and then flashed vibe ui 2.5 rom through cwm
Some Devil said:
I flashed it (P6000 5.0 official ROM) from link in your main post and then flashed vibe ui 2.5 rom through cwm
Click to expand...
Click to collapse
Hah and i thought that i missed some Just5 update. anyway did you flash this too?
https://onedrive.live.com/redir?res...5722&authkey=!AH0Lby_Znhqq2PQ&ithint=file,zip ( i removed sdcard swap, as i thought it isn't needed)
These mods were made by @HypoTurtle
More info...
http://bbs.elephone.hk/thread-3981-1-2.html#.VWR7vk_tmko
---------- Post added at 05:23 PM ---------- Previous post was at 04:59 PM ----------
Updated Main discussion Post!
Nope, I didn't. Most of these fixes are useless for me, since I don't use the features they fix And I already have this recovery installed. But thank you for the link, I'll maybe install xposed later
Problem with sp flash tools
How did you flash cm 12.1? I read that you have to use sp flash tools, but you haven't mentioned that. I tried to flash with it, but when i pressed download and connected my blaster without battery, nothing happened. Hope you can help .
Sasha_Baron said:
How did you flash cm 12.1? I read that you have to use sp flash tools, but you haven't mentioned that. I tried to flash with it, but when i pressed download and connected my blaster without battery, nothing happened. Hope you can help .
Click to expand...
Click to collapse
Hi there is loads of tutorials in bbs.elephone.hk about flashing
Sent from my BLASTER using Tapatalk
Greetings!
Can you confirm how well do BlueTooth and USB keyboards work with Blaster? ...And with how many |what hidden caveats?
That should be relevant to developing with the device.
Thank you!
All the Best!
has anybody tried "150622 Update！Elephone P6000 VIBE_2.5 Multilang【Android 5.0 Lollipop】" (can't post links, but you can find it on bbs.elephone site)? It says i need to upgrade using sp flashtols, but i'm kinda afraid of bricking my device.
Some Devil said:
has anybody tried "150622 Update！Elephone P6000 VIBE_2.5 Multilang【Android 5.0 Lollipop】" (can't post links, but you can find it on bbs.elephone site)? It says i need to upgrade using sp flashtols, but i'm kinda afraid of bricking my device.
Click to expand...
Click to collapse
Yeah i tried, not worth it, wait for official 5.0, I would be on stock also, but my backup seems faulty.
NiksSkersts said:
Yeah i tried, not worth it, wait for official 5.0, I would be on stock also, but my backup seems faulty.
Click to expand...
Click to collapse
Official you mean by just5 devs or elephone?
Some Devil said:
Official you mean by just5 devs or elephone?
Click to expand...
Click to collapse
By just5, Kristaps Skutelis confirmed that there will be update to 5.0, somewhere is the link to his twitter account, in which it shows Blaster running 5.0.
Official 5.0 update
Hey there!
I've been bugging just5 for about two months now - and here's what I got out of them (answered on their FB page):
"Būs iespējams atjaunināt Blaster 4.4 uz Lollipop sākot no 01.08. Just5 veikalā Brīvības 40, Rīgā"
From this I conclude that there will be no OTA. I will have a look myself Saturtday and see for myself how they manage the update, I can update you on the matter if you wish.
Ruldis said:
Hey there!
I've been bugging just5 for about two months now - and here's what I got out of them (answered on their FB page):
"Būs iespējams atjaunināt Blaster 4.4 uz Lollipop sākot no 01.08. Just5 veikalā Brīvības 40, Rīgā"
From this I conclude that there will be no OTA. I will have a look myself Saturtday and see for myself how they manage the update, I can update you on the matter if you wish.
Click to expand...
Click to collapse
Can you upload official blaster Lollipop backup?
Q&A for [ROM][5.0.2][12-04-2015] SlimSaber [UNOFFICIAL SlimLP]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][12-04-2015] SlimSaber [UNOFFICIAL SlimLP]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
nice :good:
Some time ago i was using SlimSaberKat by @fusionjack and later CM11 by @Markox89 as a daily driver. But then the demand for lollopop pushed me forward to leave those great roms.
Currently I am on Omni 5.1 and it is much smoother than 5.0 . SlimLP 5.1 is imo only a matter of time and patience. See this post on slim's google+-page: https://plus.google.com/+SlimromsNet/posts/ffGnX4gXrbN
I will try it when it's ready
when will you go for 5.1
Error while restoring /system
Hello. I stuck on logo and followed the steps to fix it. But now i cant restore my files. Any fix ?
ivelin123 said:
Hello. I stuck on logo and followed the steps to fix it. But now i cant restore my files. Any fix ?
Click to expand...
Click to collapse
Screenshot needed please. What is the actual error displayed when restoring /system? Perhaps you could flash back to android 4.4.4
---------- Post added at 07:27 PM ---------- Previous post was at 07:24 PM ----------
batestota said:
when will you go for 5.1
Click to expand...
Click to collapse
Just give slimroms some time. They haven't updated the base code for a while now (and are still working on 5.1 lollipop), and they are still trying to fix many current issues with slimLP alpha.
The rom not start. I whait 15 minute on the logo, but nothing.
I have use all clean and downloading the rom 2 times..
Memory leak is fixed in latest version?
oczkers said:
Memory leak is fixed in latest version?
Click to expand...
Click to collapse
No, not yet.
TeamViewer
warrior1208,
This rom is awesome, i have one problem, i can´t have acess to TeamViewer Addon, can someone explain to me how i can this addon working to have acess to my cellphone screen?
Thanks.
Regard's,
JASSS
Bug
Enabled device heats up during charging. How to solve this problem?
Best ROM so far
I've been using all of the LP roms from xda section and all of them are still unstable(SlimLP also) but I didn't have any issues with Slimsaber.
Come from JB
Hello my current rom is JB . What do I need to instal before your rom ?
keyboard crashed
Hi!
I migrated from SlimSaber 4.4.4 3.0.80SlimKernel+ (the perfect ROM!) and resized partions (4,5+9). Wiped... wiped..wiped. Clean installation.
Keyboard AOSP doesn't work. TRWP was loosed.
What's wrong?
Thank you.
vitfain said:
Hello my current rom is JB . What do I need to instal before your rom ?
Click to expand...
Click to collapse
You need to have a kitkat compatible recovery, and just follow the steps in the OP. And of course root access
uno mas said:
Hi!
I migrated from SlimSaber 4.4.4 3.0.80SlimKernel+ (the perfect ROM!) and resized partions (4,5+9). Wiped... wiped..wiped. Clean installation.
Keyboard AOSP doesn't work. TRWP was loosed.
What's wrong?
Thank you.
Click to expand...
Click to collapse
I have had this issue once or twice. You can download another keyboard .apk(from market) and put it into /system/app manually using something like root explorer. You will need to set the permissions doing it this way. Or you could try doing a full wipe and reflashing the rom.
The recovery is in the kernel that comes with the rom. If you want TWRP back you would have to flash a custom kernel such as apolo.
PUK
Newest build, but PUK bug is still here. At least for me.
Every time i restart my phone it says sim card is locked. I enter PIN, then the phone asks to enter PUK, after entering PUK it lets me to enter new pin code, which is kind of annoying. Any ideas why this bug still occurs?
Nice ROM!
smason said:
Nice ROM!
Click to expand...
Click to collapse
Thanks! I'll update to 5.1.1 on 6th of June!
Regards!
Xposed will work on 6th build?
@warrior1208 will xposed work on the 6th june build? Because I'm using SlimLP for now because xposed works on it but I want to change to SlimSaberLP but my only concern is if xposed working or not?
akiwiz said:
@warrior1208 will xposed work on the 6th june build? Because I'm using SlimLP for now because xposed works on it but I want to change to SlimSaberLP but my only concern is if xposed working or not?
Click to expand...
Click to collapse
I'll build the ROM tomorrow, will also try XPosed on it. I'll state it in the development thread. See you there tomorrow!
still waiting a new build
Q&A for [ROM][5.1.1] [DIRTY-UNICORNS v9.3] [Unofficial-Builds] [OTA] [19/05/2015]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.1.1] [DIRTY-UNICORNS v9.3] [Unofficial-Builds] [OTA] [19/05/2015]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Does this ROM (for I9100) is totally stable for daily use? Does Maps works? Cause in Cyanogen many things broken and I had to revert to 4.4.4. And all works fine. So I'd love to use 5.1.1, mainly because of SysUI is great! But I need your expertise please.
Cheers.
DaveKing said:
Does this ROM (for I9100) is totally stable for daily use? Does Maps works? Cause in Cyanogen many things broken and I had to revert to 4.4.4. And all works fine. So I'd love to use 5.1.1, mainly because of SysUI is great! But I need your expertise please.
Cheers.
Click to expand...
Click to collapse
Last time I checked Google Maps work perfectly as it should.
arnab said:
Last time I checked Google Maps work perfectly as it should.
Click to expand...
Click to collapse
Ok... I already backup my KK and will try your ROM. Thank you for reply here in Q&A. I will give a feedback about your rom in my everyday use.
Cheers mate!
---------- Post added at 07:44 PM ---------- Previous post was at 07:20 PM ----------
Another question arnab. It appear that like other LP Roms yours doesn't support init.d. Correct me if I'm wrong. If I'm not are you thinking in supporting it in DU? I'm talking about it, cause I use swap partition (internal<->externalsd) in LP and it requires kernel with init.d support. Appolo Kernel has it for Lollipop, but I think it lacks the stability of a stock ROM, if you know what I mean. Thanks.
Hey uuh i understand that the recent menu cant be accessed using the home button anymore,,, but what is the alternative exactly? how can i see my recent apps ? :\
DaveKing said:
Ok... I already backup my KK and will try your ROM. Thank you for reply here in Q&A. I will give a feedback about your rom in my everyday use.
Cheers mate!
---------- Post added at 07:44 PM ---------- Previous post was at 07:20 PM ----------
Another question arnab. It appear that like other LP Roms yours doesn't support init.d. Correct me if I'm wrong. If I'm not are you thinking in supporting it in DU? I'm talking about it, cause I use swap partition (internal<->externalsd) in LP and it requires kernel with init.d support. Appolo Kernel has it for Lollipop, but I think it lacks the stability of a stock ROM, if you know what I mean. Thanks.
Click to expand...
Click to collapse
Solved with Init.d Toggler. Thanks. By the way, this ROM is solid. Way better than any other I have tested before. Keep up the good work and this definitely will be the best LP built for I9100!!!
Cheers Mate!
can i flash this rom on my stock partition?
Everything is working flawlessly except one thing that bothered me: external SDcard isn't recognized or mounted at all.
Raz0r_ said:
Everything is working flawlessly except one thing that bothered me: external SDcard isn't recognized or mounted at all.
Click to expand...
Click to collapse
Here too. Having problems with GLTools and LINK2SD not finding SDcard, but card is mounted and working for some applications. I'm installing the ROM again in my I9100, just in case. Praying. :fingers-crossed: But one thing is for certain, this ROM is blasting fast and stable in overall. Congrats to DU team for that! And thanks for arnab by bringing it to us.
Raz0r_ said:
Everything is working flawlessly except one thing that bothered me: external SDcard isn't recognized or mounted at all.
Click to expand...
Click to collapse
I fixed my problem with Paragon NTFS&HFS+. There's a problem in LP with SELinux permissions. It has to be enforced the permission to apps get access to sdcard. And there's users permissions and developers permissions. I tried to fix the problem just by restorecon -Fv /data/media but with no results. So the problem is more with the enforcing mode of SELinux being necessary for some apps to work correctly, like lucky patcher or gltools that perhaps use a more "kernel level code".
I think LP is good in many things, but Google turn out to be the bad guy and struggle a lot the way the permissions are made with applications and sdcard in write and read access.
So, to say how things are going right now. I have full access to my 128gb sdcard as an internal storage by an init.d script. All the apps until now working with full support. And now will begin to install all the games and apps to see how this fantastic rom run after all. I'll give more news about the other features when I start to use them.
Cheers.
Sdcard is working perfectly in link2sd storage info sdcard1 shows perfectly....btw ybdnt u use the default apps2sd.
Thanks you!
Got bootloop... I think need to clean flash it again
I have an issue with TWRP 2.8.6.0 in DU rom. When I'm in recovery I can't swipe to confirm flash or restore backup. Swipe button is outside of my screen. Any solutions?
Misiantowski said:
I have an issue with TWRP 2.8.6.0 in DU rom. When I'm in recovery I can't swipe to confirm flash or restore backup. Swipe button is outside of my screen. Any solutions?
Click to expand...
Click to collapse
Post a pic.
Hey can anyone please Tell me how to turn off the backlight of buttons in this rom....it really annoy me a lot.
arnab said:
Post a pic.
Click to expand...
Click to collapse
Sorry. My bad. I had 2.8.5.0 TWRP theme on my internal SD. I delete theme and now everything is fine. It's is possible to set more than 5 app shortcuts on lockscreen?
Can I get TWRP 2.8.7.0 in separate download? Thanks by the way for Great DU Lollipop ROM
Hebrew lang
Hi
is hebrew lang working in this version?
thearczoro said:
Can I get TWRP 2.8.7.0 in separate download? Thanks by the way for Great DU Lollipop ROM
Click to expand...
Click to collapse
Il upload the kernel with twrp 2.8.7.0 soon in odin tar format.