Related
After playing around with cooking my own rom from .290 stock I thought I had hard bricked my ZU
No recovery
Flashmode and Fastboot would only connect for the briefest moments
Flashtool could not flas an FTF as it would say "device disconnected" immediately
Flashtool could not flash a boot.img as the device would again disconnect before you could do any thing
The saving grace was @jackie099 's 4.3 root tool - used as it wasn't intended to be used
The thing with this tool is it waits for the device then flashes the boot.img where flashtool is the other way around for flashing a boot.img. ie the device has to be there before selecting the .img.
It may have taken 10 or more attempts to get a working recovery on the ZU
I suspect that I could have managed the same using adb/fastboot at the command line?
Links:
@jackie099 root tool http://forum.xda-developers.com/showthread.php?t=2576006
ps make sure that you keep a working rom and nandroid backup on the sd card - ie don't del the wrong nandroid and del the old rom's to make room
EDIT:
After 3 hours of fretting and thinking I had well and truly bricked the ZU and wasted $800 (yes I know that our money down here is near worthless ) I rebooted windows this morning - looks like most of the troubles was windows 8, and I had just a normalish soft-bricked ZU that any noob could have fixed. I feel so http://www.youtube.com/watch?v=JmvCpR45LKA
blueether said:
After playing around with cooking my own rom from .290 stock I thought I had hard bricked my ZU
No recovery
Flashmode and Fastboot would only connect for the briefest moments
Flashtool could not flas an FTF as it would say "device disconnected" immediately
Flashtool could not flash a boot.img as the device would again disconnect before you could do any thing
The saving grace was @jackie099 's 4.3 root tool - used as it wasn't intended to be used
The thing with this tool is it waits for the device then flashes the boot.img where flashtool is the other way around for flashing a boot.img. ie the device has to be there before selecting the .img.
It may have taken 10 or more attempts to get a working recovery on the ZU
I suspect that I could have managed the same using adb/fastboot at the command line?
Links:
@jackie099 root tool http://forum.xda-developers.com/showthread.php?t=2576006
ps make sure that you keep a working rom and nandroid backup on the sd card - ie don't del the wrong nandroid and del the old rom's to make room
EDIT:
After 3 hours of fretting and thinking I had well and truly bricked the ZU and wasted $800 (yes I know that our money down here is near worthless ) I rebooted windows this morning - looks like most of the troubles was windows 8, and I had just a normalish soft-bricked ZU that any noob could have fixed. I feel so http://www.youtube.com/watch?v=JmvCpR45LKA
Click to expand...
Click to collapse
With locked bootloader... Nah!!!! It's next to impossible to brick this beast....
Sent from my XT925 using Tapatalk
I managed to screw up while trying to root .290, my fix was to relock the bootloader via flash tool, then use PCC to reflash stock.
I bricked mine a couple times trying to root and install recoveries. I just used FlashTool. Worked for everthing.
The problem was not the soft brick, if I was worried about that I would not be playing with cooking my own version of 290
The problem was windows, with in a tenth of a second of connecting the phone windows would do something (reset the connection?) and then flashtool etc would say device disconnected. .1 of a second is not long to try an flash a boot image
Ps I have an unlocked bootloader
^^ you did "restart" in that special mode that allows unsigned drivers in win8 prior to setting up flashtool etc? (sry, don't a link, check flashtool thread maybe) 9 times out of 10 this is the issue with win8.
Sent from my C6833 using Tapatalk
iBuzman said:
^^ you did "restart" in that special mode that allows unsigned drivers in win8 prior to setting up flashtool etc? (sry, don't a link, check flashtool thread maybe) 9 times out of 10 this is the issue with win8.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
yep drivers all install correctly, was working fine one flash, then 15-20 min later after another (failed) flash it wasn't
in 14 years of linux I'm sure I never had the amount of random issues that I'v had in 6 months of windows 8
Yesterday I run into a similar problem when I try to flash the C6833 to my C6802. The flashtool stuck for like 10 minutes, and I had to leave urgently so that I.... manually remove the cable.
When I got home, I started everything again, and this time, it works for me.
To OP: I also had problem with windows8 because it does not recognize the drivers no matter how I tried. Desperatedly, I switch to Windows 7 (I have 2 system running), everything was pretty smooth and straight forward.
justsomebody said:
Yesterday I run into a similar problem when I try to flash the C6833 to my C6802. The flashtool stuck for like 10 minutes, and I had to leave urgently so that I.... manually remove the cable.
When I got home, I started everything again, and this time, it works for me.
To OP: I also had problem with windows8 because it does not recognize the drivers no matter how I tried. Desperatedly, I switch to Windows 7 (I have 2 system running), everything was pretty smooth and straight forward.
Click to expand...
Click to collapse
Win 8 you have to boot it into it's special boot mode and click through about 4 pages to find the correct place to tell it to load unsigned drivers,then it will work. But this wasn't an issue with unsigned drivers.
@blueether I had a ZU with locked bootloader, but after flash kernel with flashtool my phone is dead... No led, no power, PC can't recognized any driver...
With @jackie099 root tool you had put your ZU working?
esponjamix said:
@blueether I had a ZU with locked bootloader, but after flash kernel with flashtool my phone is dead... No led, no power, PC can't recognized any driver...
With @jackie099 root tool you had put your ZU working?
Click to expand...
Click to collapse
Yes I used jackie's tool, but the real issue I had was windows not the phone.
How much battery did you have before you flashed?
What exactly did you flash?
blueether said:
Yes I used jackie's tool, but the real issue I had was windows not the phone.
How much battery did you have before you flashed?
What exactly did you flash?
Click to expand...
Click to collapse
70% battery when i flashed.
I had Philz XZdualrecovery for locked bootloaders and flashed in TWRP this rom "C68XX ★ monxDIFIED ★ ZUltra™ (4.3) FULL-ROOT". When power on, my phone freeze on Sony logo. So, i flashed again, but this time, i only flash the kernel .290 on flashtool. When i removed the cable and reboot my phone, i can't see anything... no power on, no led when i connect my phone with vol + and cable... anything... Any help ?
esponjamix said:
70% battery when i flashed.
I had Philz XZdualrecovery for locked bootloaders and flashed in TWRP this rom "C68XX ★ monxDIFIED ★ ZUltra™ (4.3) FULL-ROOT". When power on, my phone freeze on Sony logo. So, i flashed again, but this time, i only flash the kernel .290 on flashtool. When i removed the cable and reboot my phone, i can't see anything... no power on, no led when i connect my phone with vol + and cable... anything... Any help ?
Click to expand...
Click to collapse
Does flashtool say anything when you connect the phone?
Have you tried a reset (hold power and vol +) or have you tried a hard reset (the red button in side of the sim cover)?
blueether said:
Does flashtool say anything when you connect the phone?
Have you tried a reset (hold power and vol +) or have you tried a hard reset (the red button in side of the sim cover)?
Click to expand...
Click to collapse
Flashtool log with Windows 8:
13/020/2014 06:20:13 - INFO - <- This level is successfully initialized
13/020/2014 06:20:13 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
13/020/2014 06:20:18 - INFO - Device disconnected
"Device disconnected" without connect phone to PC
Yes, i tried a reset and hard reset... not success...
EDIT:
After 3 hours with charger, the red led appears.
When i connect with PC (Flashtool open) - VOL+ and cable, flashtool log:
13/040/2014 09:40:12 - INFO - Device connected with USB debugging off
13/040/2014 09:40:12 - INFO - For 2011 devices line, be sure you are not in MTP mode
Can i pass this error?
Vol- and connect cable, is the same "Device connected with USB debugging off"
esponjamix said:
Flashtool log with Windows 8:
13/020/2014 06:20:13 - INFO - <- This level is successfully initialized
13/020/2014 06:20:13 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
13/020/2014 06:20:18 - INFO - Device disconnected
"Device disconnected" without connect phone to PC
Yes, i tried a reset and hard reset... not success...
EDIT:
After 3 hours with charger, the red led appears.
When i connect with PC (Flashtool open) - VOL+ and cable, flashtool log:
13/040/2014 09:40:12 - INFO - Device connected with USB debugging off
13/040/2014 09:40:12 - INFO - For 2011 devices line, be sure you are not in MTP mode
Can i pass this error?
Vol- and connect cable, is the same "Device connected with USB debugging off"
Click to expand...
Click to collapse
The issue you're facing might be directly related to trying to use flash tools in Windows 8 rather than Windows 7.
There is an issue installing the drivers you need to flash the phone in Windows 8.
You need to enter something called 'special mode' and tinker with a few settings.
hassanmahmood said:
The issue you're facing might be directly related to trying to use flash tools in Windows 8 rather than Windows 7.
There is an issue installing the drivers you need to flash the phone in Windows 8.
You need to enter something called 'special mode' and tinker with a few settings.
Click to expand...
Click to collapse
Same error in Windows 7 and Windows 8...
it seems like ive done the impossible with bricking my phone, locked bootloader and not rooted. power went out when 4.3 almost finished flashing and the phone wouldnt go into flashmode or fastboot. charging it would have flashing red> solid red> then nothing > and repeat.. trying to hard reset react sometimes and the red reset button does nothing.connecting it to the computer would make the "connected" sound then constantly play the "disconnect" sound.. nothing shows up in hardware management.
the good thing is i called sony on dec26 and recently got an RMA number, didnt have proof of purchase since it was a gift and the rep told me my warranty is still there so i sent it in and they just received it today, hopefully ill get a working zxu back soon.
I flashed the wrong rom on my Xperia Z2, I tried fixing it by flashing tft file, but I couldn't even get the device into flashmode (Power + Vol up), It just never vibrates, when I put it in the charger it just keeps blinking red.
What's the proper fix for this? and is this a soft-brick or hard-brick? Please help.
RevolverForce said:
I flashed the wrong rom on my Xperia Z2, I tried fixing it by flashing tft file, but I couldn't even get the device into flashmode (Power + Vol up), It just never vibrates, when I put it in the charger it just keeps blinking red.
What's the proper fix for this? and is this a soft-brick or hard-brick? Please help.
Click to expand...
Click to collapse
Flashmode is not Power button + Volume up. But...
Connect USB to ur computer
Then Hold the Volume Down key on your phone while u connect the USB Cable to the phone.
If you successfully get to flashmode, then u can flash an FTF file for ur phone. (This will also wipe internal sd files if you don't untick 'data' under wipes) Then again, phone might not boot properly if you don't wipe as u said something about custom ROM.
OR Follow these steps I found on Sony website
1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Install and open PC Companion then select Support Zone.
3. Phone Software Update.
4. Start.
5. Repair Phone
6. Continue
7. Accept data removal
8. Next
9. Wait for prepare
10. Select Phone
11. Follow the connection steps
Tried using flashtool with Vol down buut
18/058/2014 23:58:26 - ERROR - Drivers need to be installed for connected device.
18/058/2014 23:58:26 - ERROR - You can find them in the drivers folder of Flashtool.
I'm sure that I have the drivers installed as I tried earlier today to unlock the bootloader through flashtool (which didn't really work out) and it recognized the device just fine.
right now it doesn't even show the Sony logo..I'll try PC Companion method in seconds..
EditC Companion is asking me to make sure that the battery level is above %80, when I was flashing the new rom, the battery level was around %50, should I care about this, or is it just an extra precaution? because I don't really see a way for me to know the battery level.
RevolverForce said:
Tried using flashtool with Vol down buut
18/058/2014 23:58:26 - ERROR - Drivers need to be installed for connected device.
18/058/2014 23:58:26 - ERROR - You can find them in the drivers folder of Flashtool.
I'm sure that I have the drivers installed as I tried earlier today to unlock the bootloader through flashtool (which didn't really work out) and it recognized the device just fine.
right now it doesn't even show the Sony logo..I'll try PC Companion method in seconds..
EditC Companion is asking me to make sure that the battery level is above %80, when I was flashing the new rom, the battery level was around %50, should I care about this, or is it just an extra precaution? because I don't really see a way for me to know the battery level.
Click to expand...
Click to collapse
I'm sure 50% is enough to install through PC Companion unless ur battery is bad.
And do you by anymeans use windows 8? If you do, Did you disable driver signature while installing Flashmode, Fastboot and Z2 drivers from the C:\Flashtool\drivers folder, or where ever u installed flashtool to.
I believe I didn't disable driver signature, I connected the device to a different usb port too just to be sure, my OS is windows 8.1.
PC Companion is updating the phone right now, I'll see how it turns out and report back to you, thanks.
Edit:It worked, my phone is alive, thank you, stanley <3
RevolverForce said:
I believe I didn't disable driver signature, I connected the device to a different usb port too just to be sure, my OS is windows 8.1.
PC Companion is updating the phone right now, I'll see how it turns out and report back to you, thanks.
Edit:It worked, my phone is alive, thank you, stanley <3
Click to expand...
Click to collapse
There's no keeping that Bad Boy down! Cheers mate!
Hello!
I have problem when try to get back to stock after installed GPe ROM...
Flashtool vagy Pc Companion doesnt work anybody could help me how to solve?
Have you tried rebooting your computer?
This usually fixes it for me when I have had that issue.
pTeronaut said:
Have you tried rebooting your computer?
This usually fixes it for me when I have had that issue.
Click to expand...
Click to collapse
Lot of time
yupiter00 said:
Hello!
I have problem when try to get back to stock after installed GPe ROM...
Flashtool vagy Pc Companion doesnt work anybody could help me how to solve?
Click to expand...
Click to collapse
First of all, this should be posted in the FAQ section, not here. To help you fix this can you please answer these questions?
1- What do you mean by Flashtool and PC companion "does not work"? What error messages do you get from each?
2- How do you use Flashtool? In Falsh mode or fastboot mode?
3- What is the version of your flashtool?
najoor said:
First of all, this should be posted in the FAQ section, not here. To help you fix this can you please answer these questions?
1- What do you mean by Flashtool and PC companion "does not work"? What error messages do you get from each?
2- How do you use Flashtool? In Falsh mode or fastboot mode?
3- What is the version of your flashtool?
Click to expand...
Click to collapse
Of course
1.Flashtool Said will be need usb debugging and uknown sources ,Sony Sompanion doesnt start repairing because modified ROM...
2.In Flashmode try in fastboot mode probadly doesnt answering...
3.0.9.18 the newest...
But the biggest problem when try the charge still rebooting because that bootlop
yupiter00 said:
Of course
1.Flashtool Said will be need usb debugging and uknown sources ,Sony Sompanion doesnt start repairing because modified ROM...
2.In Flashmode try in fastboot mode probadly doesnt answering...
3.0.9.18 the newest...
But the biggest problem when try the charge still rebooting because that bootlop
Click to expand...
Click to collapse
Please copy and paste your Flashtool log here, or attach it as a file.
OR:
Follow this instruction VERY CAREFULLY.
1- Disconnect your phone from the computer and turn it off completely.
2- Find and download an FTF that is specifically for your device. For example if your device is a C6833 find an FTF specifically for that model. You can find a ton of these FTFs in the general forum.
3- Make sure your Flashtool version is exactly 0.9.18.6. If not, uninstall it and install 0.9.18.6.
4- Run Flashtool and click on the icon that looks like a spark (flash device). Choose flash mode.
5- Navigate to the directory where the FTF is and select the directory.
6- You should see the contents of the FTF appear in the dialog window. Under "Wipe" select all of them (APPSLOG, DATA, and CACHE).
7- Click on flash and let the program do its work. Wait until it prompts you to connect the phone.
8- When prompted, hold the volume down key and then connect the phone to the USB port of the computer. Keep holding the key down until you see the flash starting. Wait until it completes.
If you get an error in any step, CLEARLY describe what fails AND include the error message by posting the log or a snapshot of your screen. If you just say "it didn't work" I won't be able to help.
Tried this very carefully but get this error!
najoor said:
Please copy and paste your Flashtool log here, or attach it as a file.
OR:
Follow this instruction VERY CAREFULLY.
1- Disconnect your phone from the computer and turn it off completely.
2- Find and download an FTF that is specifically for your device. For example if your device is a C6833 find an FTF specifically for that model. You can find a ton of these FTFs in the general forum.
3- Make sure your Flashtool version is exactly 0.9.18.6. If not, uninstall it and install 0.9.18.6.
4- Run Flashtool and click on the icon that looks like a spark (flash device). Choose flash mode.
5- Navigate to the directory where the FTF is and select the directory.
6- You should see the contents of the FTF appear in the dialog window. Under "Wipe" select all of them (APPSLOG, DATA, and CACHE).
7- Click on flash and let the program do its work. Wait until it prompts you to connect the phone.
8- When prompted, hold the volume down key and then connect the phone to the USB port of the computer. Keep holding the key down until you see the flash starting. Wait until it completes.
If you get an error in any step, CLEARLY describe what fails AND include the error message by posting the log or a snapshot of your screen. If you just say "it didn't work" I won't be able to help.
Click to expand...
Click to collapse
http://i62.tinypic.com/oqeu0m.png
Thanks for trying help
You are not using the version of flashtool that najoor told you to use.
DOWNLOAD VERSION 9.18.6, the latest version is causing that error.
pTeronaut said:
You are not using the version of flashtool that najoor told you to use.
DOWNLOAD VERSION 9.18.6, the latest version is causing that error.
Click to expand...
Click to collapse
That i use which version?
yupiter00 said:
That i use which version?
Click to expand...
Click to collapse
Ok:
1- Read post #6 carefully
2- Apply it.
3- If it doesn't work, read post #6 carefully again.
4- Repeat until it works.
najoor said:
Ok:
1- Read post #6 carefully
2- Apply it.
3- If it doesn't work, read post #6 carefully again.
4- Repeat until it works.
Click to expand...
Click to collapse
Ok and how fix always rebooting which kill the battery? I cant flash with this problem...Cannot charge
yupiter00 said:
Ok and how fix always rebooting which kill the battery? I cant flash with this problem...Cannot charge
Click to expand...
Click to collapse
And cannot get switch off with red button ad with vol + power off ...
When battery had enough power switch it immediatly and still rebooting that canoot charge....
najoor said:
Please copy and paste your Flashtool log here, or attach it as a file.
OR:
Follow this instruction VERY CAREFULLY.
1- Disconnect your phone from the computer and turn it off completely.
2- Find and download an FTF that is specifically for your device. For example if your device is a C6833 find an FTF specifically for that model. You can find a ton of these FTFs in the general forum.
3- Make sure your Flashtool version is exactly 0.9.18.6. If not, uninstall it and install 0.9.18.6.
4- Run Flashtool and click on the icon that looks like a spark (flash device). Choose flash mode.
5- Navigate to the directory where the FTF is and select the directory.
6- You should see the contents of the FTF appear in the dialog window. Under "Wipe" select all of them (APPSLOG, DATA, and CACHE).
7- Click on flash and let the program do its work. Wait until it prompts you to connect the phone.
8- When prompted, hold the volume down key and then connect the phone to the USB port of the computer. Keep holding the key down until you see the flash starting. Wait until it completes.
If you get an error in any step, CLEARLY describe what fails AND include the error message by posting the log or a snapshot of your screen. If you just say "it didn't work" I won't be able to help.
Click to expand...
Click to collapse
Hi again!
Problem now are in 7 step with flash because battery when enough power still get off ...That how to flash?
yupiter00 said:
Hi again!
Problem now are in 7 step with flash because battery when enough power still get off ...That how to flash?
Click to expand...
Click to collapse
If the phone not have enough battery do the following:
1- Makes sure it is turned off. To do so you can hold the power and volume up buttons simultaneously for a few seconds and then you will feel a vibration and then the phone will turn off.
2- leave the phone connected to a charger for about 10 hours.
If that doesn't charge the phone you will have to take it to a Sony repir center.
najoor said:
If the phone not have enough battery do the following:
1- Makes sure it is turned off. To do so you can hold the power and volume up buttons simultaneously for a few seconds and then you will feel a vibration and then the phone will turn off.
2- leave the phone connected to a charger for about 10 hours.
If that doesn't charge the phone you will have to take it to a Sony repir center.
Click to expand...
Click to collapse
04/027/2015 18:27:34 - INFO - Flashtool Version 0.9.18.6 built on 30-05-2015 22:30:00
04/027/2015 18:27:34 - INFO - Executing search strategies to find proxy selector
04/027/2015 18:27:34 - INFO - No proxy found for IE. Trying next one
04/027/2015 18:27:34 - INFO - No proxy found for firefox. Trying next one
04/027/2015 18:27:34 - INFO - No proxy found for java. Trying next one
04/027/2015 18:27:35 - INFO - Syncing devices from github
04/027/2015 18:27:39 - INFO - Scanning devices folder for changes.
04/027/2015 18:27:57 - INFO - Pulling changes from github.
04/027/2015 18:27:58 - INFO - Devices sync finished.
04/028/2015 18:28:02 - INFO - Selected Bundle for Sony Xperia Z Ultra (C6833). FW release : 14.5.A.0.270. Customization : Customized CE4
04/028/2015 18:28:02 - INFO - Preparing files for flashing
04/028/2015 18:28:03 - INFO - Device disconnected
04/030/2015 18:30:59 - INFO - Please connect your device into flashmode.
04/036/2015 18:36:35 - INFO - Device connected with USB debugging off
04/036/2015 18:36:35 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/036/2015 18:36:39 - INFO - Device disconnected
04/041/2015 18:41:28 - INFO - Device connected with USB debugging off
04/041/2015 18:41:28 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/041/2015 18:41:34 - INFO - Device disconnected
04/009/2015 19:09:27 - INFO - Device connected with USB debugging off
04/009/2015 19:09:27 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/009/2015 19:09:54 - INFO - Device disconnected
04/010/2015 19:10:32 - INFO - Flash canceled
04/011/2015 19:11:00 - INFO - Selected Bundle for Sony Xperia Z Ultra (C6833). FW release : 14.4.A.0.108. Customization : 1275-9426
04/011/2015 19:11:00 - INFO - Preparing files for flashing
04/011/2015 19:11:56 - INFO - Please connect your device into flashmode.
04/018/2015 19:18:25 - INFO - Flash canceled
Flashtool logs...
najoor said:
If the phone not have enough battery do the following:
1- Makes sure it is turned off. To do so you can hold the power and volume up buttons simultaneously for a few seconds and then you will feel a vibration and then the phone will turn off.
2- leave the phone connected to a charger for about 10 hours.
If that doesn't charge the phone you will have to take it to a Sony repir center.
Click to expand...
Click to collapse
Thanks but little worrying about heating it will be doesn t porblem for 10 hours ?
najoor said:
If the phone not have enough battery do the following:
1- Makes sure it is turned off. To do so you can hold the power and volume up buttons simultaneously for a few seconds and then you will feel a vibration and then the phone will turn off.
2- leave the phone connected to a charger for about 10 hours.
If that doesn't charge the phone you will have to take it to a Sony repir center.
Click to expand...
Click to collapse
1 is working but only for few seconds after vibration will switch on
Probadly go to servis ,flashtool doesnt receiving flash mode only windows sound when touch it...
yupiter00 said:
Probadly go to servis ,flashtool doesnt receiving flash mode only windows sound when touch it...
Click to expand...
Click to collapse
I am sorry I'm trying to help you, but unfortunately I don't understand your sentence.
I looked at the log that you posted. it seems that when you connect your phone to the computer in step 8, the phone is not turned off.
Try turning the phone off again the way I told you. When you are turning it off if should not be connected to the computer or charger. Otherwise it turns right back on.
And don't worry about heating. After the phone is turned off you can connect it to the charger for many hours.
Don't try anything new. Just follow the instructions I gave you.
najoor said:
I am sorry I'm trying to help you, but unfortunately I don't understand your sentence.
I looked at the log that you posted. it seems that when you connect your phone to the computer in step 8, the phone is not turned off.
Try turning the phone off again the way I told you. When you are turning it off if should not be connected to the computer or charger. Otherwise it turns right back on.
And don't worry about heating. After the phone is turned off you can connect it to the charger for many hours.
Don't try anything new. Just follow the instructions I gave you.
Click to expand...
Click to collapse
Thanks man you are amazing It s done worked can i add to friend list?
Hello guys, I have another problem with this m4...
I cannot get into flashmode. Using Windows 7 with all drivers and using the original cable in a usb 2.0 When I connect the phone holding the button i see the green led lightning for a moment, then it turn off and again light up for a moment. After this, in pc I see "SOMC Flash Device" but the flashing not start with any version of FlashTool.
And then, with the stock rom (tried many versions) the phone sometimes freeze and reboot after 5-10 minutes.
How can I fix? I want to relock the bootloader and flash the original rom in tft format. But still no flashmode....
P.S. fastboot working fine.
I've been there also...
Flash this via fastboot-mode and then you should be able to connect via flashmode.
http://forum.xda-developers.com/m4-aqua/development/5-1-1-aosp-beta-team-t3193546
I don't know, is there another rom which can be install via fastbootmode...
Thanks, but not worked, still the same problem...
Reboot your PC. Sometimes it helps.
Still the problem.... Can be caused by unlocked bootloader?
No, I don't think so.
So you connect your phone on flashboot after when flashtool ask to do it?
Yes, but anytime I try to put device into flashmode, not work...
Ok, now the device freeze and reboot also in normal mode, without connect to pc. I tried to reconnect the battery and enter flashmode, but nothing work... Only fastboot, twrp and system with random reboots.....
What about flashmode driver do u install them
Bricked z3v with magisk, if I plug the phone in to either a wall socket or PC it vibrates, endlessly at three second intervals, each time with red LED. If I try to enter flash mode, then its the same but with a brief green led after the red. I can enter fastboot. Need help!
Your device is error bootloader, it need make hardware is repair bootloader. All off soft fix is not ok.
geogeorge45 said:
Bricked z3v with magisk, if I plug the phone in to either a wall socket or PC it vibrates, endlessly at three second intervals, each time with red LED. If I try to enter flash mode, then its the same but with a brief green led after the red. I can enter fastboot. Need help!
Click to expand...
Click to collapse
Hope you could fix the phone, that happened to me and the solution was to flash with flashtool an stock ftf.
eldoggor said:
Hope you could fix the phone, that happened to me and the solution was to flash with flashtool an stock ftf.
Click to expand...
Click to collapse
tryed to flash but there's no flashmode :/
geogeorge45 said:
tryed to flash but there's no flashmode :/
Click to expand...
Click to collapse
You press flash in flashtool, then choose flashmode in flashtool, later look for the stock rom you already downloaded using xperifirm, when it asks, you connect the phone pressing volume down. It worked for me.
You can just try to flash Kernel.sin from your ftf using Flashtool. Make sure your flashmode drivers fastboot drivers are installed properly.
Cause I had the same experience and I managed to recover my phone just by flashing Kernel.sin. So that way you can save your internal storage data.
If it fails then you're out of luck and you'll have to flash the entire FTF.
Hope this helped
chesterr said:
You can just try to flash Kernel.sin from your ftf using Flashtool. Make sure your flashmode drivers fastboot drivers are installed properly.
Cause I had the same experience and I managed to recover my phone just by flashing Kernel.sin. So that way you can save your internal storage data.
If it fails then you're out of luck and you'll have to flash the entire FTF.
Hope this helped
Click to expand...
Click to collapse
i tryed that too, but failed.
eldoggor said:
You press flash in flashtool, then choose flashmode in flashtool, later look for the stock rom you already downloaded using xperifirm, when it asks, you connect the phone pressing volume down. It worked for me.
Click to expand...
Click to collapse
yeah it asked me for flashmode but, nothing happens when i try to connect it