Hi guys,
I am on NH7 4.4.4 stock firmware.
I have an issue with GPS locking... Sometimes maps keeps 'waiting for location' and sometimes off the location by more than a km.
Installed GPS status and i get following result. Tried factory reset but did not work. It shows location when connected via wifi but not on mobile carrier, using in India.
Is anyone facing the issue.. Any input guys.. Been trying to fix since 2 weeks used gps fix app on plays store too but no use
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N900P using Tapatalk
Any solution for fixing it? Not seem to lock and show exact position.
Sent from my SM-N900P using Tapatalk
swapyworld said:
Any solution for fixing it? Not seem to lock and show exact position. View attachment 3022480
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
go here I'm laying it out for you http://forum.xda-developers.com/not...om-flashin-basics-t2896440/page2#post56878157 don't want to have to type it twice. Lol
jimzweb1 said:
go here I'm laying it out for you http://forum.xda-developers.com/not...om-flashin-basics-t2896440/page2#post56878157 don't want to have to type it twice. Lol
Click to expand...
Click to collapse
My phone isn't new, got it from someone who had already upgraded it, I normally wait for the review before i take the OTA
And thanks mate but i heard directly flashing NC5 over NH7 will lead to brick.
that's the main concern nothing else, i had gone through your post before and hence posted the same query in your thread.
Is it possible to downgrade from NH7 to NC5 directly through odin? it wont brick right?
swapyworld said:
My phone isn't new, got it from someone who had already upgraded it, I normally wait for the review before i take the OTA
And thanks mate but i heard directly flashing NC5 over NH7 will lead to brick.
that's the main concern nothing else, i had gone through your post before and hence posted the same query in your thread.
Is it possible to downgrade from NH7 to NC5 directly through odin? it wont brick right?
Click to expand...
Click to collapse
Downgrading from NH7 to NC5 through odin is the best way to go. That will put you back to bone stock. It will not hard brick, it may bootloop. Read through these threads a few weeks back when NH7 4.4.4 OTA came out http://forum.xda-developers.com/note-3-sprint/help/4-4-4-download-mode-t2877528 and http://forum.xda-developers.com/note-3-sprint/help/upgrade-to-4-4-4-revert-to-4-4-2-t2878402 and http://forum.xda-developers.com/note-3-sprint/help/recovery-boot-issue-t2884488 let me know how it goes !!!
Seems like a lot of work ^
I went from 4.4.2 to 4.4.4 and had a issue with GPS as well.
I simply went back to a TW Rom, enabled location, went to google maps and let it lock my position. Once this is done, I booted into recovery and flashed the 4.4.4 Rom.
once booted I went to the playstore and downloaded gps fix.
Opened up app, pressed start gave it 3 minutes and bam, locked and loaded.
Went into google maps and all was well.
Nickitt said:
Seems like a lot of work ^
I went from 4.4.2 to 4.4.4 and had a issue with GPS as well.
I simply went back to a TW Rom, enabled location, went to google maps and let it lock my position. Once this is done, I booted into recovery and flashed the 4.4.4 Rom.
once booted I went to the playstore and downloaded gps fix.
Opened up app, pressed start gave it 3 minutes and bam, locked and loaded.
Went into google maps and all was well.
Click to expand...
Click to collapse
mine isn't locking at all unless i am on wifi, that's the issue.
GPS fix for me just keeps running...doesnt fix anything at all for me
@jimzweb1
mate you mentioned you are using XAS and not SPR version of firmware.
1. any differences apart from sprint logo? and which network are you on CDMA with evdo?
2. Do u you have direct options for APN and hotspot like in 4.4.4 NH7? if possible, please post a screenshot of your settings->General tab
swapyworld said:
@jimzweb1
mate you mentioned you are using XAS and not SPR version of firmware.
1. any differences apart from sprint logo? and which network are you on CDMA with evdo?
2. Do u you have direct options for APN and hotspot like in 4.4.4 NH7? if possible, please post a screenshot of your settings->General tab
Click to expand...
Click to collapse
The only thing I have noticed with XAS is no yellow Sprint logo on boot up and shut down. My " Preferred network mode" setting is LTE / CDMA. I still run 4.4.2 NC5, waiting for android 5.0 L (lollipop) to show up, then I will unroot and take the OTA. I did the same thing with NH7 when it came out, and people started having trouble so went back to NC5. As for my hotspot I purchased WiFi Tether Router a long time ago best $2.50 I ever spent. If you want to enable your hotspot for free here is the link http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159
@jimzweb1
On NH7, wifi hotspot is available by default, no app is required, did u check mate?
and thanks for all the help, will try downgrading to NC5 in a day or two, btw which cwm hltespr version you are using?
swapyworld said:
@jimzweb1
On NH7, wifi hotspot is available by default, no app is required, did u check mate?
and thanks for all the help, will try downgrading to NC5 in a day or two, btw which cwm hltespr version you are using?
Click to expand...
Click to collapse
I use Philz custom CWM, there are two versions that work. First is the latest 6.48.4. hlte this version is the one size fits all, totally customizable. The other is 6.12.9. hltespr this version is only for a Sprint device, I use this one it has been absolutely bulletproof. It's a little older, you can change the background color and font color, here is the link for Philz https://goo.im/devs/philz_touch/CWM_Advanced_Edition/
@jimzweb1
i dont customise anything, just want a recovery which can take a backup perfectly and restore without issues and of course wiping, flashing and fixing permission.
i guess cwm 6.12.9 is the way to go !!
Btw mate have you faced any issues on GPS? do u know any rom which would be good for that?
Had a note 2 and a developer had provided GPS fix for regions like asia, US, Europe and so on, didnt see that here.
so on stock, your GPS is accurate?
GPS Fix
Nickitt said:
Seems like a lot of work ^
I went from 4.4.2 to 4.4.4 and had a issue with GPS as well.
I simply went back to a TW Rom, enabled location, went to google maps and let it lock my position. Once this is done, I booted into recovery and flashed the 4.4.4 Rom.
once booted I went to the playstore and downloaded gps fix.
Opened up app, pressed start gave it 3 minutes and bam, locked and loaded.
Went into google maps and all was well.
Click to expand...
Click to collapse
This worked for me as well. I went back to stock touchwiz rom, enabled gps and got a fix using google maps. with gps enabled, i rebooted and flashed custom roms with working GPS. something about the GPS is built into the hardware or something, and it has to be turned on during the install.
1micah5 said:
This worked for me as well. I went back to stock touchwiz rom, enabled gps and got a fix using google maps. with gps enabled, i rebooted and flashed custom roms with working GPS. something about the GPS is built into the hardware or something, and it has to be turned on during the install.
Click to expand...
Click to collapse
@Nickitt and @1micah5, guys few questions for u.. As i ll be leaving town soon for two months n i need GPS bad
1. Which TW rom u went to first?
2. Which custom rom u flashed?
3. While on TW rom, could u get ur position fixed in GPS ONLY mode or only in high accuracy mode?
Sent from my SM-N900P using Tapatalk
swapyworld said:
@Nickitt and @1micah5, guys few questions for u.. As i ll be leaving town soon for two months n i need GPS bad
1. Which TW rom u went to first?
2. Which custom rom u flashed?
3. While on TW rom, could u get ur position fixed in GPS ONLY mode or only in high accuracy mode?
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
1. Sac23 Custom S5 Port V5
2. Same as 1
3. Either or, GPS only mode worked but would recommend high accuracy unless you cannot.
Nickitt said:
1. Sac23 Custom S5 Port V5
2. Same as 1
3. Either or, GPS only mode worked but would recommend high accuracy unless you cannot.
Click to expand...
Click to collapse
1. So u were not on a stock rom before too?
2. Is it the MOAR rom u r talking about?
Problem is mine gps only mode just refuses to locate me
Sent from my SM-N900P using Tapatalk
swapyworld said:
1. So u were not on a stock rom before too?
2. Is it the MOAR rom u r talking about?
Problem is mine gps only mode just refuses to locate me
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
No I was NOT on a stock rom and haven't been on one for a year, don't plan on either.
You could try @freezas stockish wizless Rom if you'd feel more comfortable.
I did however indeed come from @sac23s MOAR V5 Rom and haven't had an issue with GPS.
Granite my GPS doesn't lock immediately, it'll usually take 5 seconds or so to get a lock and the GPS to realize exactly where I'm at.
Did you try downloading from the playstore the app called GPS fix?
Nickitt said:
No I was NOT on a stock rom and haven't been on one for a year, don't plan on either.
You could try @freezas stockish wizless Rom if you'd feel more comfortable.
I did however indeed come from @sac23s MOAR V5 Rom and haven't had an issue with GPS.
Granite my GPS doesn't lock immediately, it'll usually take 5 seconds or so to get a lock and the GPS to realize exactly where I'm at.
Did you try downloading from the playstore the app called GPS fix?
Click to expand...
Click to collapse
Yeah gps fix, gps toolbox tried quite a few.. A reboot does get me locked on satellites but doesn't show coordinates on GPS status and tool app.
Maps show me the same position in high accuracy n Power saving mode, GPS only doesn't get me locked on maps
But as GPS status app does show satellites.. I feel it's not a hardware issue!!
Sent from my SM-N900P using Tapatalk
swapyworld said:
Yeah gps fix, gps toolbox tried quite a few.. A reboot does get me locked on satellites but doesn't show coordinates on GPS status and tool app.
Maps show me the same position in high accuracy n Power saving mode, GPS only doesn't get me locked on maps
But as GPS status app does show satellites.. I feel it's not a hardware issue!!
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Sounds like something isn't playing right my man, Odin stock and re-root. Be your only option it sounds like.
Nickitt said:
Sounds like something isn't playing right my man, Odin stock and re-root. Be your only option it sounds like.
Click to expand...
Click to collapse
That's what i did.. Was on 4.4.4 NH7.. Downgraded to 4.4.2 NC5.. Lil improvement that's all
I guess i ll have to try ur method once..!!
Sent from my SM-N900P using Tapatalk
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* Your warranty is now void.
Untested build. I don't have the device. Someone with some balls please make a back up and give this a try and get back to me.
Any root issues http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip
ROM: pulled
GAPPS: http://goo.im/devs/BaNkS/GApps%204.3
Thanks to the guys over at cyanogen, google, and uXylon.
Will have to give it a shot tonight
Sent from my SGH-I777 using Tapatalk 2
I flashed it, it booted into android fine but every time I selected start on the first setup screen it would reboot. Now I can't get into recovery, however I have a broken power button which might be causing complications. I'm working on getting back into recovery but this is an old phone so if I don't get it working, its no big deal.
s33d1ing said:
I flashed it, it booted into android fine but every time I selected start on the first setup screen it would reboot. Now I can't get into recovery, however I have a broken power button which might be causing complications. I'm working on getting back into recovery but this is an old phone so if I don't get it working, its no big deal.
Click to expand...
Click to collapse
Damn that is horrible. Power button doesn't work at all? Have you trye taking it apart and cleaning the contactors? What recovery do you have? Is there only one option? can you op to setup gapps later? You can always try using fastboot to get in there.
RBMacGregor said:
Damn that is horrible. Power button doesn't work at all? Have you trye taking it apart and cleaning the contactors? What recovery do you have? Is there only one option? can you op to setup gapps later? You can always try using fastboot to get in there.
Click to expand...
Click to collapse
I have taken the phone apart but I still couldn't get the power button to work. Anyhow, I just got everything restored and I'm going to try flashing it again. :laugh:
Okay, I just flashed the rom this time. It boots into android but when I try to open any app, the phone reboots.
s33d1ing said:
I have taken the phone apart but I still couldn't get the power button to work. Anyhow, I just got everything restored and I'm going to try flashing it again. :laugh:
Okay, I just flashed the rom this time. It boots into android but when I try to open any app, the phone reboots.
Click to expand...
Click to collapse
haha you have balls Ill give you that! Had me worried hate to brick someones device. Could you possibly logcat it? I think I need to change the tool chain compiling the kernel googles using 4.7 now and I'm not sure cyanogen is ready out of the box for it. Ill try with 4.6 tomorrow.
RBMacGregor said:
haha you have balls Ill give you that! Had me worried hate to brick someones device. Could you possibly logcat it? I think I need to change the tool chain compiling the kernel googles using 4.7 now and I'm not sure cyanogen is ready out of the box for it. Ill try with 4.6 tomorrow.
Click to expand...
Click to collapse
I cant get into settings to turn on usb debugging because the phone restarts every time I open settings. Is there any way to make a logcat in this situation?
s33d1ing said:
I cant get into settings to turn on usb debugging because the phone restarts every time I open settings. Is there any way to make a logcat in this situation?
Click to expand...
Click to collapse
See if you can download catlog and get the log that way for him.
Good luck.
Sent from the i777
I got a soft brick. Good thing I had a Jtag because I could not even get into download by button combination.
You may want to check and see if the i777 repo has even been updated to a useable state, as it had not been a few days ago when I last checked.
The kernel works but the ROM itself doesn't do much.
I have ported the CM 10.2 unofficial build pulled from GT-I9100 forum and I flashed it. All I can say is it worked fine but still is unstable..highly unstable. I used d default kernel and changed the modules and keypad script. It booted well and was fast. But phone heating issue and couple of FC's us what I encountered. And battery life issues.
Sent from my SGH-I777 using xda premium
AJ Newkirk said:
You may want to check and see if the i777 repo has even been updated to a useable state, as it had not been a few days ago when I last checked.
The kernel works but the ROM itself doesn't do much.
Click to expand...
Click to collapse
I had to make some changes to the i777 device tree to get it to build. Im gonna give it another go after work today.
twcobra said:
I got a soft brick. Good thing I had a Jtag because I could not even get into download by button combination.
Click to expand...
Click to collapse
**** soft brick? How the hell did that happen. Boot loader went off without a hitch.
RBMacGregor said:
**** soft brick? How the hell did that happen. Boot loader went off without a hitch.
Click to expand...
Click to collapse
Not sure what caused it. I had installed GAPPS with all the extras. Next time I try I will just install the ROM and the GAPPS core. Then the extra stuff one at a time. Believe me I started getting nervious when I could not get into download by button combo. I started breathing easy when I found my Jtag pluged it in and went rite to download on power up.
Anyone know why the rom was pulled?
Spinergy02 said:
Anyone know why the rom was pulled?
Click to expand...
Click to collapse
4.3.3 versions have TRIM Implementation ....and our devices aren't design for SSD overwrite deleted blocks
Sent from my SGH-M919 using xda premium
samprocat said:
4.3.3 versions have TRIM Implementation ....and our devices aren't design for SSD overwrite deleted blocks
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
TRIM would not be implemented on anything for our device. The SII version of CM10.2 and anything based off of CM10.2 trees would not contain TRIM.
I haven't made any calls but I sure hope I'm not having mic issues on 4.0 because voltage control is a really big deal to me and I don't want to upgrade.
Could someone explain why TRIM wouldn't be good for our devices?
RBMacGregor said:
**** soft brick? How the hell did that happen. Boot loader went off without a hitch.
Click to expand...
Click to collapse
I've had the same thing, doing pretty much nothing!
Fresh install, wiped everything, from system to memory card, plugged into USB transferring some files and BOOM, brick. Wipe again, reinstall, continue copying some files and brick again.
Needless to say I am sticking to 10.1 for a while longer.
So I'm no developer, havent kept up on code for a couple years but I do love or did (when I had MDK before my phone **** out and VZW replaced with MJ7) so I've been stuck on safestrap not that its a bad thing if theres more than 1 or 2 roms then its almost better with multiboot options...n really really hard to brick it hashcode your my hero)
Install:
Unzip into your SS backup dir and restore to a blank rom slot. I went super small as small as SS would allow for slot creation. If your getting an error on restoring be sure to try deleting the slot and readding it then restoring the system files. If your WiFi doesn't work try flashing MJ7 / MK2 SS modules. Only flash after booting up rom and knowing wifi isnt working (big thx to Mistertac and Timmy for that tidbit to get wifi working on MJ7). This rom might work for others like ME7 SS users maybe even MDK Twrp users but I need testing done for me.
Got bored ****ed with International rom Omega v18 (Also have Foxhound 3.5 working on SS bout done with that port) until it worked perfect for what I use it for no other areas have been tested but it seems fairly stable for me... wifi works great. 4g im getting better speeds on this rom than HyperDrive (could be fluke someone check if the rom works for them plz?) and wifi tethering, phone, internet, messaging). This install was pretty much a debloated Omega 18 in which I chose only basics ****ed around for a couple hours and finally came up with solutions... You more than likely will have to move or load apps you want on here as this is just a safestrap ... like I said no developer here was hoping someone might run with this (aroma, updates, fixes, repackaging, zip) and continue to port more of these over with me to our safestrap dependent asses.
This was tested on SS 3.70&3.71 from a MK2 stock and default kernel for SS. Like I said I'm not really a developer and a airly new member to xda so I had to post here. if it doesnt work for you or sucks or u think I suck well thx for the hate least I tried got no love for the ppl not doing **** to contribute and just *****ing or posting stupid questions that are answered with simple forum searches! thx goes out to any developer doing work on the VZW..or S4 in general. ::indie:: thx for the rom its pretty nice open carrier on next release?, Hashcode specifically dudes probably saved a million lives jrkruse, Surge1223, ktoonsez and open1your1eyes obviously, sbreen94, k1mu, old&slow, beanstown106, Dubbsy, invisiblek
Download (I'm hoping this works for enough ppl to test quick repackage and repost for me, msgs wont get checked too often I smoke to much to...)
https://docs.google.com/uc?id=0BwL6-n3ZMcedSnBsWE5ITVJOVWc&export=download
Happy New Year! Happy Flashing or Restoring obviously dont hold me responsible for any damage done to your phone i tested this on 3 friends phones and my own before uploading it.
Oh if it works n u arent an asshole, +1 thank me, indie, Hash and Surge
Didn't work. I tried 3 times on SS 3.71 and it failed all 3 times. ..I didn't even get to flashing the mk2 module
Sent from my SCH-I545 using XDA Premium HD app
warchyld77 said:
Didn't work. I tried 3 times on SS 3.71 and it failed all 3 times. ..I didn't even get to flashing the mk2 module
Sent from my SCH-I545 using XDA Premium HD app
Click to expand...
Click to collapse
You don't flash this. You unzip it and copy it to your twrp backup folder then restore it to a Rom slot I believe.
Please correct if I am wrong op.
Sent from my SCH-I545 using Tapatalk
warchyld77 said:
Didn't work. I tried 3 times on SS 3.71 and it failed all 3 times. ..I didn't even get to flashing the mk2 module
Sent from my SCH-I545 using XDA Premium HD app
Click to expand...
Click to collapse
Correct. Restore as a backup
It worked like a charm Thanks guys
Sent from my SCH-I545 using XDA Premium HD app
Looking forward to playing around with this later Tonight. Thanks for trying to add more options for us SS folk!
Verizon Galaxy S4
SafeStrap 3.71
Hyperdrive 12
Works for me. Will be playing with it over the next day or so.
Sent from my SCH-I545 using xda app-developers app
no flashing needed.
didnt know easiest way to pack this as i had never done one. just unzip into your backup folder on sdcard or int wherever safestrap backs up too for you already. then restore it into any rom slot, i had it on slot 2 and hyperdrive on 1 rooted stock/slightly modded mk2 on my stock. im pretty sure this will work on any MJ7 / MK2 as it just "flashes" the mk2 modem to that slot. Oh and DO NOT FLASH MK2 MODULES or ANY MODULES OVER THIS. IT WILL MORE THAN LIKELY MESS IT UP. IF IT WAS NECESSARY I WOULD HAVE INCLUDED IT IN INSTRUCTIONS. Glad to hear its working for a couple people. Maybe someone could get this thread moved into the proper forum as its apparently some what working now which might help some other safestrappers?
This is a clean wipe install so dont try to carry any of your data or settings over until after 1st boot. after that flash whatever you want for testing no other mods have been tested with this it does have the 10% volume boost preflashed.
It didn't work for me.
Downloaded - Unzipped - Placed the backup in my TWRP backups folder.
Created a fresh slot, During restore it FAILED during system restore.
Anyway to get an MD5, possibly I got a bad dl??
might have to play with this later
lazer9 said:
It didn't work for me.
Downloaded - Unzipped - Placed the backup in my TWRP backups folder.
Created a fresh slot, During restore it FAILED during system restore.
Anyway to get an MD5, possibly I got a bad dl??
Click to expand...
Click to collapse
hey sorry bud did u try deleting the slot and making a new one and restoring it to that? i have various ppl confirming so far besides those trying to flash the file theyve had success. hopefully one of them is able to help me turn it into a more stable flashable rom for SS. otherwise if you tried the previously mentioned steps im out of info for now sorry again for wastet of time. i dont know that it would matter at all but this was on safestrap 3.7 that i had been using not 71... screenshots, md5 and the works will have to wait for a proper flashable file release. thx
lazer9 said:
It didn't work for me.
Downloaded - Unzipped - Placed the backup in my TWRP backups folder.
Created a fresh slot, During restore it FAILED during system restore.
Anyway to get an MD5, possibly I got a bad dl??
Click to expand...
Click to collapse
See if your MD5 matches mine.
684bfc31f63aa414b3402bf9d310d5b0
I have SS 3.71 so it seems to restore with both. My S4 is MK2 Saferooted.
Sent from my SCH-I545 using xda app-developers app
It's running fine for me so far. . I did however end up flashing mj7 modules to get my wifi working.
I'll check back here tomorrow after I play around for a bit.
Sent from my SCH-I545 using XDA Premium 4 mobile app
gigilie said:
hey sorry bud did u try deleting the slot and making a new one and restoring it to that? i have various ppl confirming so far besides those trying to flash the file theyve had success. hopefully one of them is able to help me turn it into a more stable flashable rom for SS. otherwise if you tried the previously mentioned steps im out of info for now sorry again for wastet of time. i dont know that it would matter at all but this was on safestrap 3.7 that i had been using not 71... screenshots, md5 and the works will have to wait for a proper flashable file release. thx
Click to expand...
Click to collapse
Thanks for giving us a try at this anyhow and yes, it seems some have had success so I'm not giving up just yet. I have Hyperdrive installed in my stock side so this was the first slot I created since months ago on a prior build of SS. Yes, I am using the latest 3.71 or whatever it's version is.
klabit87 said:
See if your MD5 matches mine.
684bfc31f63aa414b3402bf9d310d5b0
Click to expand...
Click to collapse
Thanks for that. I will re-download now that I'm home (Maybe something went amiss with the work dl) and then compare the MD5 to yours.
Update: Just downloaded at home and the MD5 on the .zip reports --> B8F477E4A8C31DE5D272C2E7B141A85A
lazer9 said:
Thanks for giving us a try at this anyhow and yes, it seems some have had success so I'm not giving up just yet. I have Hyperdrive installed in my stock side so this was the first slot I created since months ago on a prior build of SS. Yes, I am using the latest 3.71 or whatever it's version is.
Thanks for that. I will re-download now that I'm home (Maybe something went amiss with the work dl) and then compare the MD5 to yours.
Update: Just downloaded at home and the MD5 on the .zip reports --> B8F477E4A8C31DE5D272C2E7B141A85A
Click to expand...
Click to collapse
try it again then if your first zip had that goofy md5 mine is the same as your updated md5. blame google drive i guess. hope it works 2nd time around.
gigilie said:
try it again then if your first zip had that goofy md5 mine is the same as your updated md5. blame google drive i guess. hope it works 2nd time around.
Click to expand...
Click to collapse
Did the same thing again. Failed about a two minutes into the restore process system. Is there a special size allocation I need to make for system in SS slot? I'm just going with the default 2,xxx something..
lazer9 said:
Thanks for giving us a try at this anyhow and yes, it seems some have had success so I'm not giving up just yet. I have Hyperdrive installed in my stock side so this was the first slot I created since months ago on a prior build of SS. Yes, I am using the latest 3.71 or whatever it's version is.
Thanks for that. I will re-download now that I'm home (Maybe something went amiss with the work dl) and then compare the MD5 to yours.
Update: Just downloaded at home and the MD5 on the .zip reports --> B8F477E4A8C31DE5D272C2E7B141A85A
Click to expand...
Click to collapse
Thanks. I will give it a shot again.
Just got home so it will only take about 5 mins if that.
Edit: Decided to do it on my phone instead and yours is correct @lazer9.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SCH-I545 using XDA Premium 4 mobile app
I'm downloading it. Ill make it so its a proper rom.zip and patch issues related to root/Safestrap/kernel if there are any. Ill re-upload and then OP or someone else if he wishes can takeover from there. Obviously ill test it first lol.
Edit: Successfully booted the rom zip of it i made to the stock slot but couldn't/didn't want to wait for the initial boot screen to get done (the medallion w/ a lion coin spinning).. Also successfully booted my own rom I made in the 1st slot. So I went from stock to having two different rooms installed lol, I'll upload after I check somethings, specifically if omega will go past the bootscreen.
Ok everything is working good for me so far. I read further back to NOT flash any modules during install...which i didnt at first but then my wifi wasnt working so I went back in and flashed them and it fixed that problem.
Other than that everything is working great. Very lightweight rom huh? I mean as far as TW goes, you know what i mean.
Hey im happy to see more options coming our way.
Ive been SafeStrapped since my Razr, although I had many more rom options on that phone, i love the S4 and what people are still trying to do for our locked down phones.
Luckily i can get my custom recovery on with my girls Sprint S4 lol
After the 4.4.4 update I can no longer find the "Update PRL" and "Update Profile" menu choices? Anyone know how to enable them or trigger them another way?
Moguledyouth said:
After the 4.4.4 update I can no longer find the "Update PRL" and "Update Profile" menu choices? Anyone know how to enable them or trigger them another way?
Click to expand...
Click to collapse
Did you flash an AOSP ROM? If so, you can't update PRL or Profile using those type os ROMs.
No I am talking about the official Sprint Sanctioned NH7 4.4.4 update. I no longer can find the options for "Update PRL" and "Update Profile".
I took the sprint update too and dont have the prl and update profile
Moguledyouth said:
After the 4.4.4 update I can no longer find the "Update PRL" and "Update Profile" menu choices? Anyone know how to enable them or trigger them another way?
Click to expand...
Click to collapse
GORDAN13 said:
I took the sprint update too and dont have the prl and update profile
Click to expand...
Click to collapse
I have it, so I'm not sure what happened.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LMMT said:
I have it, so I'm not sure what happened.
Click to expand...
Click to collapse
same here i have as well. odin tar falshed nc5. did a full wipe. then tar flashed nh7 no issues at all.
I took the update and still have these options. Then tripped knox ?
No issues here either, although I was on Pac-Man. And then I used the tar file from micmars thread to get to NH7.
Moguledyouth said:
After the 4.4.4 update I can no longer find the "Update PRL" and "Update Profile" menu choices? Anyone know how to enable them or trigger them another way?
Click to expand...
Click to collapse
Was stock, rooted and tripped.
Flashed back to stock, took OTA
Rooted
I still have both PRL and Profile and they work.
Moguledyouth said:
After the 4.4.4 update I can no longer find the "Update PRL" and "Update Profile" menu choices? Anyone know how to enable them or trigger them another way?
Click to expand...
Click to collapse
##scrtn# should trigger profile update, prl update, and system software version check. No data will be lost, totally safe to do.
You might just want to factory reset the phone to see if it brings the menu options back tough.
Having the same issue on a Note 4.
Im contemplating copying the settings.apk from my note 3 over to note 4 to try to fix but because note 4 has fingerprint scan It may be a problem
Just some food for thought.. I flashed NH7 found in micmars post... initially had PRL and Profile Update options, but once I rooted, they disappeared. Related perhaps?
---------- Post added at 05:37 AM ---------- Previous post was at 05:26 AM ----------
Update: Checked "Fake System Status" under Security Hacks in Wanam Xposed to make Device Status show Official. PRL and Profile Update options have returned....
emazzy72 said:
Just some food for thought.. I flashed NH7 found in micmars post... initially had PRL and Profile Update options, but once I rooted, they disappeared. Related perhaps?
Click to expand...
Click to collapse
Make sure after you use Odin3 to flash stock tar that you let the phone reboot to recovery to finish up.
NH7 here and all settings are present. I have downgrade to NAB and NC5 many times and back to NH7 many times and ALWAYS let it reboot to recovery after flash. My settings never go missing unless I flash custom recovery directly after stock tar. It is easy to reproduce your guys problems by not letting the phone reboot to recovery after flashing a stock tar in odin. You can make Wifi Hotspot and USB Tethering settings not get added as well doing the same.
idone said:
Make sure after you use Odin3 to flash stock tar that you let the phone reboot to recovery to finish up.
NH7 here and all settings are present. I have downgrade to NAB and NC5 many times and back to NH7 many times and ALWAYS let it reboot to recovery after flash. My settings never go missing unless I flash custom recovery directly after stock tar. It is easy to reproduce your guys problems by not letting the phone reboot to recovery after flashing a stock tar in odin. You can make Wifi Hotspot and USB Tethering settings not get added as well doing the same.
Click to expand...
Click to collapse
Hi bud, are you saying to uncheck the auto reboot on odin. Then when the flash complete/pass, disconnect from PC, hold the buttons, and boot into stock recovery ?
jimzweb1 said:
Hi bud, are you saying to uncheck the auto reboot on odin. Then when the flash complete/pass, disconnect from PC, hold the buttons, and boot into stock recovery ?
Click to expand...
Click to collapse
No, if you have auto-reboot checked you should see the phone reboot itself and see android guy with progress bar for a second or 2. This is some things finishing up in recovery. A lot of people were missing hotspot and usb tethering settings in their settings menu because of flashing custom recover directly after, or not having auto reboot checked and power off their device by holding power button 7 seconds after Odin3 flash PASS and power back up to system software.
But I see some user just had issue because of Wanam, I don't use that so I'm not sure of the complications it adds.
idone said:
No, if you have auto-reboot checked you should see the phone reboot itself and see android guy with progress bar for a second or 2. This is some things finishing up in recovery. A lot of people were missing hotspot and usb tethering settings in their settings menu because of flashing custom recover directly after, or not having auto reboot checked and power off their device by holding power button 7 seconds after Odin3 flash PASS and power back up to system software.
But I see some user just had issue because of Wanam, I don't use that so I'm not sure of the complications it adds.
Click to expand...
Click to collapse
Cool, I see what you are saying. After I flash a rom, I let sit for a few minutes and settle in. Everything seems to work better if you don't rush it.
jimzweb1 said:
Cool, I see what you are saying. After I flash a rom, I let sit for a few minutes and settle in. Everything seems to work better if you don't rush it.
Click to expand...
Click to collapse
No it really does reboot itself to stock recovery to execute some commands after flashing stock tar.
idone said:
No it really does reboot itself to stock recovery to execute some commands after flashing stock tar.
Click to expand...
Click to collapse
Thanks bud, I will make sure I always have auto reboot checked.
Not only that, xbmc app is no longer working on NH7.
Hi,
Im currently running liquidsmooth on my g3 and im unable to get a GPS lock. Tried using gps fix in the playstore and still nothing. I've made sure location is on and in high accuracy mode.
Also restored a backup i had of jasmineROM and still have the same problem...
Any solution? Thx
cali4nia831 said:
Hi,
Im currently running liquidsmooth on my g3 and im unable to get a GPS lock. Tried using gps fix in the playstore and still nothing. I've made sure location is on and in high accuracy mode.
Also restored a backup i had of jasmineROM and still have the same problem...
Any solution? Thx
Click to expand...
Click to collapse
Try restoring your stock ROM not Jasmine. Get a lock in Device Only Mode. Leave location on then hop into TWRP and clean flash your ROM of choice.
That in most instances will fix your issue.
Mistertac said:
Try restoring your stock ROM not Jasmine. Get a lock in Device Only Mode. Leave location on then hop into TWRP and clean flash your ROM of choice.
That in most instances will fix your issue.
Click to expand...
Click to collapse
Thanks for the reply. Much appreciated. Will try this out tonight!
Mistertac said:
Try restoring your stock ROM not Jasmine. Get a lock in Device Only Mode. Leave location on then hop into TWRP and clean flash your ROM of choice.
That in most instances will fix your issue.
Click to expand...
Click to collapse
Ended up doing as you said but still am not able to get a lock in liquid after flashing and getting a lock on the stock/rooted/deodexed rom posted in the android development subforum here.
Thinking it might just be a custom rom issue but i'll keep flashing other roms and see what happens. If you or anyone else has any ideas, I'm all ears!
Thanks!
cali4nia831 said:
Ended up doing as you said but still am not able to get a lock in liquid after flashing and getting a lock on the stock/rooted/deodexed rom posted in the android development subforum here.
Thinking it might just be a custom rom issue but i'll keep flashing other roms and see what happens. If you or anyone else has any ideas, I'm all ears!
Thanks!
Click to expand...
Click to collapse
If you are not getting a lock on any ROM your flashing, if you don't have your true stock backup TOT / KDZ back to stock may be your only option.
I usually get a lock and leave GPS on before I flash another ROM and usually I have no issues.
Hopefully you get it going
Mistertac said:
If you are not getting a lock on any ROM your flashing, if you don't have your true stock backup TOT / KDZ back to stock may be your only option.
I usually get a lock and leave GPS on before I flash another ROM and usually I have no issues.
Hopefully you get it going
Click to expand...
Click to collapse
Yeah that's probably what im gonna end up doing. I usually have gps off all the time until i absolutely need it. Ended up biting me in the ass this time.
Hey all! Having some issues i'm hoping someone will be able to help me with. I just rooted my note 3 yesterday (not the first time) and I seemed tho have lost data (no 4g, 3g, 2g) nothing. I have searched far and wide trying to find a fix with no avail. I have tried flashing with odin the mj4 firmware .I have tried different roms, I have attempted to manually add an APN and still no luck. I'm clueless now and have no idea what to do. Here is how I rooted my phone yesterday:
youtube.com/watch?v=eDHSXn5KwAw (used the odin installer available as well as the .tar)
Installed twrp.
I then installed the Phronesis rom (so bad a$$) but had no data.
I tried then to use the cynagen 13 and still no data.
If anyone could help me out I'd greatly appreciate it!
xjvirkedziex said:
Hey all! Having some issues i'm hoping someone will be able to help me with. I just rooted my note 3 yesterday (not the first time) and I seemed tho have lost data (no 4g, 3g, 2g) nothing. I have searched far and wide trying to find a fix with no avail. I have tried flashing with odin the mj4 firmware .I have tried different roms, I have attempted to manually add an APN and still no luck. I'm clueless now and have no idea what to do. Here is how I rooted my phone yesterday:
youtube.com/watch?v=eDHSXn5KwAw (used the odin installer available as well as the .tar)
Installed twrp.
I then installed the Phronesis rom (so bad a$$) but had no data.
I tried then to use the cynagen 13 and still no data.
If anyone could help me out I'd greatly appreciate it!
Click to expand...
Click to collapse
When you said you had no data, we're you able to set your apn manually?
Sent from my SM-N920C using XDA-Developers mobile app
jhunt75 said:
When you said you had no data, we're you able to set your apn manually?
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
I tried to set it up manually too and it still did not work.
#Update:
I was able to get data now with a different ROM (pac man rom). However, I can only get 3g and not 4g. So, 3g wifi and anything under 3g I can get but...it sucks. I went from I cant even remember what Modem to now I have OC5. Not sure what else to try or do. I did notice that the roms I was having issues with no data seemed to be the ones ported for 6.0. Now I'm on 5.1.1 and have 3g...maybe a different rom?
xjvirkedziex said:
I tried to set it up manually too and it still did not work.
#Update:
I was able to get data now with a different ROM (pac man rom). However, I can only get 3g and not 4g. So, 3g wifi and anything under 3g I can get but...it sucks. I went from I cant even remember what Modem to now I have OC5. Not sure what else to try or do. I did notice that the roms I was having issues with no data seemed to be the ones ported for 6.0. Now I'm on 5.1.1 and have 3g...maybe a different rom?
Click to expand...
Click to collapse
Ok are you in the USA running the sprint n900p?
Sent from my SM-N920C using XDA-Developers mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N920C using XDA-Developers mobile app
Also, make sure you're on the correct preferred network. Roms sometimes like to use OTHER networks that aren't compatible. Use an app like 4G Switcher or similar to change it. If you're in the USA, "LTE/GSM/CDMA" works for me. In past roms, "LTE/CDMA" has sometimes connected me to the verizon network, which i'm not a part of. I am on OK2 modem, if it matters. https://idlekernel.com/flash-tools/firmware/hltespr_SM-N900P/
jhunt75 said:
View attachment 3877499
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
Are you on the Phronesis rom? I'm having the same trouble. No data and no sim card notification.
---------- Post added at 01:04 AM ---------- Previous post was at 01:03 AM ----------
darksavior said:
Also, make sure you're on the correct preferred network. Roms sometimes like to use OTHER networks that aren't compatible. Use an app like 4G Switcher or similar to change it. If you're in the USA, "LTE/GSM/CDMA" works for me. In past roms, "LTE/CDMA" has sometimes connected me to the verizon network, which i'm not a part of. I am on OK2 modem, if it matters. https://idlekernel.com/flash-tools/firmware/hltespr_SM-N900P/
Click to expand...
Click to collapse
Are you running the Phronesis rom? I've tried everything and still no data.
---------- Post added at 01:44 AM ---------- Previous post was at 01:04 AM ----------
xjvirkedziex said:
Hey all! Having some issues i'm hoping someone will be able to help me with. I just rooted my note 3 yesterday (not the first time) and I seemed tho have lost data (no 4g, 3g, 2g) nothing. I have searched far and wide trying to find a fix with no avail. I have tried flashing with odin the mj4 firmware .I have tried different roms, I have attempted to manually add an APN and still no luck. I'm clueless now and have no idea what to do. Here is how I rooted my phone yesterday:
youtube.com/watch?v=eDHSXn5KwAw (used the odin installer available as well as the .tar)
Installed twrp.
I then installed the Phronesis rom (so bad a$$) but had no data.
I tried then to use the cynagen 13 and still no data.
If anyone could help me out I'd greatly appreciate it!
Click to expand...
Click to collapse
I just got data on the Phronesis rom. Just use the apn in this thread and you"ll be up and running.
brooksop68 said:
Are you on the Phronesis rom? I'm having the same trouble. No data and no sim card notification.
---------- Post added at 01:04 AM ---------- Previous post was at 01:03 AM ----------
Are you running the Phronesis rom? I've tried everything and still no data.
---------- Post added at 01:44 AM ---------- Previous post was at 01:04 AM ----------
I just got data on the Phronesis rom. Just use the apn in this thread and you"ll be up and running.
Click to expand...
Click to collapse
I've tried the N7 Phronesis rom and didn't like it due to the wifi icon not working properly. Probably other minor bugs if i used it a bit more. I'm using "N2o.Aurora.N7.Lite.1.1" instead. I get cell service/data from both roms. The no data/simcard notification will go away once you get on the network you're meant to be on. Try what I said on my previous post. You'll have to play with the network settings a bit. I enable airplane mode first so the popups go away.
darksavior said:
I've tried the N7 Phronesis rom and didn't like it due to the wifi icon not working properly. Probably other minor bugs if i used it a bit more. I'm using "N2o.Aurora.N7.Lite.1.1" instead. I get cell service/data from both roms. The no data/simcard notification will go away once you get on the network you're meant to be on. Try what I said on my previous post. You'll have to play with the network settings a bit. I enable airplane mode first so the popups go away.
Click to expand...
Click to collapse
I've tried just about everything. Igot lte service, setup my phone, rebooted and now back to the same thing. no data.
brooksop68 said:
I've tried just about everything. Igot lte service, setup my phone, rebooted and now back to the same thing. no data.
Click to expand...
Click to collapse
You'll have to redo the process if you reboot your phone. All note7 ports have the same problem. It's a manageable problem at least. s7 ports would have the dialer fc and lose cell service if other person hung up first. Note 7 ports don't have this problem.
darksavior said:
You'll have to redo the process if you reboot your phone. All note7 ports have the same problem. It's a manageable problem at least. s7 ports would have the dialer fc and lose cell service if other person hung up first. Note 7 ports don't have this problem.
Click to expand...
Click to collapse
I'll have to give it a try. i really like sac23's note 5 rom but the link is not working. i'm not having any luck.
brooksop68 said:
I'll have to give it a try. i really like sac23's note 5 rom but the link is not working. i'm not having any luck.
Click to expand...
Click to collapse
His rom was an altered darklord n5 rom anyways. You can always goto samsungvn for the final version of that. I don't remember if anything else needed to be done to get it working other than apn.