Hi.
I have device with Android 4.1.2 and it's remote administrated by someone (don't matter). How to find this scum. At least disable it ? Most probably seted up with some installed pkg from pc which is extremly RAdmined (even try low-label formatting, no chance)
Is it possible to somehow disable that bastard control ? May be ps will show process ?
No any other ideas - newbee
Thanx
Related
Hello everybody...
This Message I left on an other thread for someone who asked for experience in using this app on a wm 6+ system:
"Just tested pocket Radiologist v2 on a stock 6.5 system of the htc HD2 and ready to revive this thread by now!
1. ADOCE had to be installed - otherwise the executable of the the app ****s up the executing.
2. installation of adoce is a bit tricky ... switch the OS-language (wm5 or 6 or 6.5) to englisch (british) if you use a foreign system. finally restart & install ADOCE. no matter if you switch back to your native language after installation.
3. start pocket radiologist - works but...
4. on the thc hd2 the font/character size is wrong. the toolbar/list which should be docked on the bottom of the screen floats about the half of it. trying to switch the screen to landscape with bsb tools doesnt work. I'm very sorry for this now!
5. Tried WVGA Fix 4 already - the characters' still far too big..."
Anyone's got an idea how to fix this character a/o resolution-problem?
Hope someone can help in the end.
I'm using the palm version on the palm emulator, works ok. the images are not great
this is interesting as i was just trying to install an older version (for wm5) but was having no luck. states it installs, but cannot find any evidence on the phone that it is there. did you a) install ADOCE and b) then transfer the pocketradiologist .exe and run it from the phone?
jsmccabe78 said:
this is interesting as i was just trying to install an older version (for wm5) but was having no luck. states it installs, but cannot find any evidence on the phone that it is there. did you a) install ADOCE and b) then transfer the pocketradiologist .exe and run it from the phone?
Click to expand...
Click to collapse
I did only the install procedure as described. first adoce, second the needed module. i installed it on main memory. execution after installation in that order made me no pain. i didn't transfer anything at all.
hope someone can solve the problem with this software...
Install completed succesfully, but I have the same problem as ppcppcppc (TS), so I hope someone can give input about a possible solution??
HI everyone,
I bought a HTC HD2 some days ago, and there was win mobile 6.5 and android 2.2 installed. THere were many problem on the Android OS, it was very slow, the auto-rotate function didnt work, the "water scale" didnt also work correctly etc. Win Mobile seemed to work properly...
Today, I installed android 2.2 on my storage card and everything is working fine so far. Of course, WIN MOBILE is on my phones memory. Before installing it, the phone had problems with the flashlight (dual flash), simply, it did not work. Now, it is also not working, neither under WIN Mobile nor ANDROID.
How can I check that it is a hardware failure ? Or maybe its ROM or something ?
Thank you
Please, some idea ?
What level is the battery at? As I think thart below 20% the flash stops working.
What happens in WinMo when you run the camera and select flash always on and then take a picture?
THanx for the response, I really need some help.
Under WinMo occurs the same problem, the flash is not working even if I set it to AUTO/ON/OFF.
I also considered that the image quality after taking a picture and comparing it to my friends phone, is more bad than his one
PLEASE, someone help ?
Anyone has an idea ?
vedolino said:
Anyone has an idea ?
Click to expand...
Click to collapse
Hi There
I'm not aware of any "diagnostics" modes to test hardware on the device but the first thing I would do from within Winmo is install a Torch App and try and use the torch, if the Torch app initialises the flash on the back of the phone then you know it's a OS fault whereas, if it doesn't you know it's a hardware fault with the flash module itself on the phone
Here's a link to TorchButton
http://forum.xda-developers.com/showthread.php?t=581382
Let us know how you get on
Thank You very much for the reply.
But I act as a noob.
I copied the whole unrar-ed folder to my SD and to phone, in both ways, when I try to start any of those files it says:
There is no application associated with ... Run the application first, then open this file from within the application.
How to run the application ?
Can someone just download the TORCH and explain to me how to install it
Would be very very thankful.
Can someone just explain me how to install or whatever the torch on my HD2 WIN Mobile 6.5.
THanx
anyone ?
thx
Do not unpack (unzip, unRAR) the file. Just copy it to your phone (or SD card). Use the phone's file explorer and find the file. click on it, and it will install.
.cab files are cabinet files, they pack other files inside them, just like zip files - but they are used in both Windows (the computer o/s) and the WinMo o/s as a unpack and install file (obviously the file should only be run in the desired o/s).
Thank You fred_up,
I barely did it, but the flash is still now working.
I hope its only the flex cable which is not too expensive, about 10 USD !?
hello!
I have a question:
I have sucessfully changed settings.apk (decompiled...changed...recompiled). And now i want to test if it is working. Is there a way to test in an Emulator (virtual machine) running android on my pc? It is to much work to replace the existing settings.apk on my phone every single time...
Could someone help me?
Hi all !
I'm brand new to your forum, because I didn't find out a solution to my problem ^^'
So there it is : yesterday my phone fell off my hand, so the touchscreen is unusable... so the phone. The trouble is that I'm... well... not very clever at all, so all my contacts are on the phone itself, not the SIM card or my Google account. That's why I need to get into the root files with my computer, to find out the databases files.
The USB debugging mode wasn't activated I think. But I'm pretty sure there's a way to force mounting system files, even with a command line...
My phone is a "Le Mobile Sosh", a branded Alcatel OneTouch Idol Mini with Android 4.2.
I need an expert !
Thank you
[EDIT] Sorry for my poor English, I'm French...
Nobody ? :'(
Hi.. I have been trying to fix a tv stick for a few months now (basically is more about the knowledge i am getting - I am not desperate in fixing it). It is a strange piece, probably clone that i have been tricked in buying. It has an Allwinner A20 dual core cpu with an AP6210 wifi module...
Tried to flash another firmware ti improve it, ended up with the wifi problem. Wifi (and bleutooth) will not start. When i press the button, it just slides back to off... I have read and tried anything i could find on the internet. I have also tried tens of firmwares, but the wifi problem persisted (the original firmware is nowhere to be found).. To cut the story short, the device will not connect to a computer through ADB (it just doesn't seem to support this function - is not a matter of drivers). So everything i have been trying did not include this option...Also the recovery can not be changed to support backup and restore from custom recoveries (i.e CWM, or TWRP)..
What i did manage was to extract a backup from the rom, of another identical device, with the Nandroid App (online version, not through the recovery). Then i used the Dragonface program to edit another similar firmware (MK808C). While loaded, i open the FSOP folder which is the folder that dragonface collapses the loaded firmware for editing and then, i replaced the existing system folder with the one i had backed up trough the Nandroid procedure... Then hit the save button of the Dragonface...
I flashed the new *.img to my tv stick with the phoenix tool, and the tv stick booted normally, looking EXACTLY the same as when i first bought it. I even managed to get the bleutooth going this time, BUT, the bloody wifi still refuses to come on :-/
I must tell you, I know my way through some computer technical stuff but I am not an expert into the coding level and i haven't had the experience of Linux systems (thus i don't really understand coding). I really thought all settings and drivers are included in the system file and copying the original system file into another firmware, would do the trick.. but i guess is not that simple... The thing is that, the way i see it, the problem is probably hidden at the booting level... hitting the system configuration in the advance settings of the Dragon face, will open some coding thing which i don't understand.. but i do see the AP6210 module in that coding, which means that the new firmware includes those drivers..If anybody have any idea or can point me to the right direction I would really appreciate it.. Thanks
I have the same problem with AP6210 on H3 Allwinner STB box. After firmware ugrade from Android 4.4.2 to Android 10 Wifi just don't work, button slides back to off. Drivers are present. Have both firware files unpacked.
Please help! What i have to do? Sys_config? Init.rc?