Hi,
an hour ago I was able to install Android 4.4 on my Nexus 4 via the automatic update.
The Phone turned off, the installation process started. There was a warning, telling me that something is wrong with the certification but I ignored it. After Android 4.4 was installed there was a warning, that I will loose root access. I choose "Fix it". Since then there is an animation on the screen with 4 points flying arround. I tried to restart the Phone, but the animation came up again.
Does somebody know whats wrong with my phone?
thx
Maxi
Hi Friends,
Please please read & solve my problem.
I have Qmobile A35 with android 4.2.2 jelly bean installed. Yesterday, I downloaded a CWM recovery from somewhere and used Farmaroot to root my mobile and used MTK mobile uncle to install CWM. MTKMU showed that it is installed successfully but when I tried to reboot into recovery both my stock recovery and CWM recovery gone. When I try to go into recovery, logo of qmobile is shown but, instead to go in recovery like in past, logo remains there for sometime then screen goes to black then logo appears again but this time mobile normally reboot.
2nd problem is big than 1st one.
After that mistake, I did another one. I was not unable to restore factor settings through builtin option as mobile restarted and no changes. So, I used 3rd party app named SRSRoot for Android to wipe all data through my PC.
Now when mobile restarts, it shows error message that "Unfortunately the setup wizard has stopped." and I am not able to pass it.
Any suggestion? Any one can help? I have heard that on this forum every one gets the solution? Can I get it too?
Hey guys venky here.I have got a lenovo s850.It has android version kit-kat.I have rooted it and for some days it was running well then i downloaded "ROM toolbox" from play store.I installed it and there was option to change resolution.I put it to "1080" and it rebooted my phone after rebooting it all the icons in it are Very huge and it also shows that "Lenovo launcher is not respoding","Lenovo Widgets are not responding" etc.,and if i try to factory reset it It shows "Have been in Meta mode,Long press power button and normal boot...Please help i want to reset or have any solutions pleae help me :crying::crying:
So,This is the problem.And now i want to Custom recovery my phone.But i cant open my phone because all the icons are huge and cannont be used.So anyother way to Custom recovery? PLEASE HELP AND THANKS!
Hey Guys
I'm new so I don't know where to put this but I bought a new Tablet from Gigaset recently.
I googled around looking for a root and found one. I rooted it, then installed the Xposed
Installer. This all worked fine, so I downloaded Fonter. I changed the Font a few times and
it worked fine. Then I enabled expert mode in the settings, so that it would not only
replace the normal font, but also italic and bold fonts. Then I restarted it, and now it won't
boot. The startup sound plays, and my custom bootlogo appears, and then it never moves
on. I tried using Funtdo and Oneclick unbrick, but neither worked. I have unlocked the
bootloader, but I haven't installed any custom roms. It runs on Android 4.2.2.
Any Help would be gladly appreciated.:fingers-crossed:
Thanks a lot
-deadrats
Hi all,
I tried for a few days and seek no solution, therefore I would like to ask if anyone have such situation and got a solution.
Model: Lenovo S939
It was with android 4.2.2 which is the stock rom until I successfully flash it to android 4.4.2 which is the official VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36 about two months ago.
I think I accidently deleted some apps in the phone(I was trying to clear personal contents) and now the phone cannot turn on at all. I am able to connect the phone to my PC using USB and have the driver for it. So I can use SP_Flash_Tool_v5.1524.00.000. I have stock roms S939_S129_140217 and S939_S126_140109 in scatter form.
I flash one of them using the SP tool, but when I finish downloading and reboot, it go back to android vibe UI v2.0, and all sort of system processes stopped continuously, I cannot access the phone at all.
Then I reboot and boot into recovery ( CWM 5 for S939, get from Needroom). I have quite some customs roms saved in my Sd cards which I got from needroom.com:
VIBEUI_V2.0_1501_7.5.1_DEV_S939_WC19.ZIP
VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36.zip
Material_ROM_V3.zip
Loli_Dark_S939_FASTCHIP.zip
I try to flash every one of them, all of them say successful, but when reboot, I boot back to vibe UI 2.0 and all systems processes stopped continuously. I tried to patiently click “OK” and try to access the system setting to enable to USB debugging, but no success.
Have any one got such experience and a solution of it? Spent too much time trying to figure out and appreciate any input.
Regards,
Lacer
when i try to flash roms in recovery...
additional infos, when i try to flash roms in recovery mode, there are warning about no context
and if i go into meta mode and click the option to clear emmc, it restart itself and go back to the vibe ui with non stop pop out of processes stop error.
Lacerlacer said:
Hi all,
I tried for a few days and seek no solution, therefore I would like to ask if anyone have such situation and got a solution.
Model: Lenovo S939
It was with android 4.2.2 which is the stock rom until I successfully flash it to android 4.4.2 which is the official VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36 about two months ago.
I think I accidently deleted some apps in the phone(I was trying to clear personal contents) and now the phone cannot turn on at all. I am able to connect the phone to my PC using USB and have the driver for it. So I can use SP_Flash_Tool_v5.1524.00.000. I have stock roms S939_S129_140217 and S939_S126_140109 in scatter form.
I flash one of them using the SP tool, but when I finish downloading and reboot, it go back to android vibe UI v2.0, and all sort of system processes stopped continuously, I cannot access the phone at all.
Then I reboot and boot into recovery ( CWM 5 for S939, get from Needroom). I have quite some customs roms saved in my Sd cards which I got from needroom.com:
VIBEUI_V2.0_1501_7.5.1_DEV_S939_WC19.ZIP
VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36.zip
Material_ROM_V3.zip
Loli_Dark_S939_FASTCHIP.zip
I try to flash every one of them, all of them say successful, but when reboot, I boot back to vibe UI 2.0 and all systems processes stopped continuously. I tried to patiently click “OK” and try to access the system setting to enable to USB debugging, but no success.
Have any one got such experience and a solution of it? Spent too much time trying to figure out and appreciate any input.
Regards,
Lacer
Click to expand...
Click to collapse
it seems like something to do with the error 1041. I failed to test the nand flash
It seems like something to do with the error 1041. I failed to run a dedicated memory test in SP tool. Anyone have any though?
Lacerlacer said:
additional infos, when i try to flash roms in recovery mode, there are warning about no context
and if i go into meta mode and click the option to clear emmc, it restart itself and go back to the vibe ui with non stop pop out of processes stop error.
Click to expand...
Click to collapse