[Q] How to come out from Boot-loop in unibody designed phone. - Android Q&A, Help & Troubleshooting

Hello Members,
I am having Micromax Knight A350 this phone not having removable battery option because of unibodey design you can remove only two sim cards Like iPhone.
I know in Boot Loop problems best way is to remove battery and then go to recovery wipe the phone and then all is well (this i know from experience of my Old phone Samsung galaxy SL - GT-i9003 )
But know i am having Knight A350 where i can't remove battery
and also I am text you that these following things i all ready tried so don't suggest in Thread
During boot loop
1) press power key only
==> this make phone restart but cant make you out from boot loop. (NOT USEFUL)
2) press power key + volume up key go to recovery and then wipe the phone.
==> i tried this 20 to 30 times but this do nothing worked same as like i pressed only power key.
3) press power key + vol down key then connect with PC and load working ROM.
==> I tried this also but result is same as above
NOTE :- 2nd and 3rd works only when phone is switched off we can say processor in deep sleep and just waiting for interrupt to start(correct me if I text wrong here). but in case of boot loop or restarting we can't put our phone in deep sleep so we cant enable option 2 and 3.
These only steps i tried so please suggest me some Good steps for this fix this issue.
Thanks

bebhav said:
Hello Members,
I am having Micromax Knight A350 this phone not having removable battery option because of unibodey design you can remove only two sim cards Like iPhone.
I know in Boot Loop problems best way is to remove battery and then go to recovery wipe the phone and then all is well (this i know from experience of my Old phone Samsung galaxy SL - GT-i9003 )
But know i am having Knight A350 where i can't remove battery
and also I am text you that these following things i all ready tried so don't suggest in Thread
During boot loop
1) press power key only
==> this make phone restart but cant make you out from boot loop. (NOT USEFUL)
2) press power key + volume up key go to recovery and then wipe the phone.
==> i tried this 20 to 30 times but this do nothing worked same as like i pressed only power key.
3) press power key + vol down key then connect with PC and load working ROM.
==> I tried this also but result is same as above
NOTE :- 2nd and 3rd works only when phone is switched off we can say processor in deep sleep and just waiting for interrupt to start(correct me if I text wrong here). but in case of boot loop or restarting we can't put our phone in deep sleep so we cant enable option 2 and 3.
These only steps i tried so please suggest me some Good steps for this fix this issue.
Thanks
Click to expand...
Click to collapse
Have you tried holding vol+, Vol- and power button all three at a time or wait for the battery to soak up and connect to pc load a working rom using flashtools. i also faced same problems with knight but these worked for me.

I was tried with battery draining
mkarthik241 said:
Have you tried holding vol+, Vol- and power button all three at a time or wait for the battery to soak up and connect to pc load a working rom using flashtools. i also faced same problems with knight but these worked for me.
Click to expand...
Click to collapse
Hi dear,
i tried by battery draining and in my case my battery was at more than 90% , my phone taken 3 heavy days to discharged. after that i found my phone battery in deep discharge state (i am guessing this ) because after attaching my charger , i had wait for 5-10 min for viewind charging display. but nothing come, so i left my phone with charger connected and when i viewed it after 2 hours again then i found it at battery level of 30% around and then work done
thanks

Related

[Q] Phone not switching on after charge!!

Hi
I just flashed UI-One MIUI 4.0 PORT [BETA 1] by TEAM MAC (http://forum.xda-developers.com/showthread.php?t=1517939) and the new baseband yesterday night and the phone was working fine. But when i went to sleep the phone had about 25% charge so in the morning it was switched off. Here's what i've done
-I have charged my phone for an hour now via usb/ac adapter and tried removing the battery , sdcard and putting it back in ( some post said to try it) but still the phone doesnt switch on.
- All it shows is the battery indicator when switched off (the really big one being charged) and about 50% is done.
-That screen comes on even if i press and hold power button
-Not able to go into recovery
Anyone any ideas????
rishi_storm said:
Hi
I just flashed UI-One MIUI 4.0 PORT [BETA 1] by TEAM MAC (http://forum.xda-developers.com/showthread.php?t=1517939) and the new baseband yesterday night and the phone was working fine. But when i went to sleep the phone had about 25% charge so in the morning it was switched off. Here's what i've done
-I have charged my phone for an hour now via usb/ac adapter and tried removing the battery , sdcard and putting it back in ( some post said to try it) but still the phone doesnt switch on.
- All it shows is the battery indicator when switched off (the really big one being charged) and about 50% is done.
-That screen comes on even if i press and hold power button
-Not able to go into recovery
Anyone any ideas????
Click to expand...
Click to collapse
well battery drain has been the biggest issue in miui rom as it doesnt get into sleep mode so the soultion just put ur phone in charging for some time on plug socket not via pc .
now use adb to boot into recovery using command or just press the 3 button combo home+vol down+ power and check if it loads into recovery if not than adb is best method to boot into recovery ,
your bootloader is corrupted.. if you can somehow made it to emergyency mode then the situation is undercontrol.. if u can't then take your fone to cc
Sent from my LG-P500 using xda premium
SOLVED
Thanks for the replies guys. You were right. I manual forced emergency mode . Now repairing.

[Q] Bricked Rogers XT910 Help :(

Hi first sorry for my bad english but i will do my best.
So heres the story, i tried to root my GF phone in order to install CM 10.2, i was able to install safestrap but i deleted something and now the phone dont even power one. I mean when i do any combinaison of Power + Volume up or down or even Power + volume up and down at the same time nothing hapen, No motorola logo, nothing append.
But i saw something, when the phone is plugged in usb and i try to boot it with volume down + power i saw an: OMAP thing in device manager... but ... it appear, disapear like 20 time in row and stop to appear after 2 minute i mean my comp detect, delete, detect, delete if you know whats i mean
The phone is a Rogers XT910 GSM phone it was working number one prior flashing but now it dont power on. Any idea ? i searched a lot on xda, tried almost anything, but nothing work.
I flash phone on a daily basis but never flashed a motorola phone before
So, let's go, let me help you mate...
1 - turn off your phone;
2 - press and hold every single physical button together (power, Vol+, Vol-)
3 - You will see a recovery screen (like an DOS on computer)
4 - Pressing Vol- you change the options, Vol+ you select any option there
5 - Enter the option: AP Fastboot
6 - Download the program called RSDLite
7 - Download a full official retail JB rom
8 - Install this rom using RSDLite
9 - After you pass whole process succesfully, your phone is ready to be used again.
Remember: CHARGE your phone to 100%, because the process is slow and your battery will drain fast, so have sure you did a long charge before installing the rom again.
I was direct on the answer...if you have any doubt...so ask...
ayeros said:
Hi first sorry for my bad english but i will do my best.
So heres the story, i tried to root my GF phone in order to install CM 10.2, i was able to install safestrap but i deleted something and now the phone dont even power one. I mean when i do any combinaison of Power + Volume up or down or even Power + volume up and down at the same time nothing hapen, No motorola logo, nothing append.
But i saw something, when the phone is plugged in usb and i try to boot it with volume down + power i saw an: OMAP thing in device manager... but ... it appear, disapear like 20 time in row and stop to appear after 2 minute i mean my comp detect, delete, detect, delete if you know whats i mean
The phone is a Rogers XT910 GSM phone it was working number one prior flashing but now it dont power on. Any idea ? i searched a lot on xda, tried almost anything, but nothing work.
I flash phone on a daily basis but never flashed a motorola phone before
Click to expand...
Click to collapse
I tryed all of those before but dont have any display at all ;\ i mean really nothing not even text on screen
Anyone ?

[Q] Samsung Galaxy Player 5.0 Bricked!!! (Help please)

Hello to all,I am in a serious trouble with my samsung galaxy player 5.0 International China version . I rooted this with super one click.And it was successful and there was no problem.But as soon as I overwrote a file in lib folder of system,it got stuck.I tapped the power key and the screens light was gone.I again tapped but there was no response.So I held the power key for a while and the device restarted.But it got stuck on samsung logo and began to restart again and again.So I took it to download mode and tried to nand erase with odin,I thought it could format the device and my device would be fixed.But it took some time and I closed odin.Then I held the power key and it restarted with a black screen containing a picture of malfunctioning connection between a phone and computer at its middle.Then I again tried to t-flash it and again closed it without completion because my notebook had no charge.After that I flashed my device with the YP-G70-Kernel-r14 and it restarted with download mode.But if I hold the power key for a while it restart and again go to the brick showing screen(I heard that this brick is called soft brick).I downloaded two stock rom STOCK_G70XXKPH_G70XXKPH_XEF and G70XXKPL_G70XXKPL_XEF.I tried to flash them in my device with odin and they succeeded.But none of them could fix my problem.They remain in download mode and if I hold the power key the device again go to the soft bricked screen.My device isn't force shutting down.If I hold the power key the screen goes and again lights up with the bricked screen.Now,my device has become very hot and after 8-9 hours it has automatically turned off.But if I connect it to the charger it again lighten up with bricked screen.
Now,I am wanting to setup a clean and clear version of android 2.2/2.3.6 in my device.Is it possible?Will this fix my problem?If it does then please explain me the steps.Or if there is any other way to fix then please help me.
N.B. I am junior about andorid root,rom etc.It is the first device I rooted successfully.
Sorry for my bad and wrong English.
Please,help.I am in a bad danger.
BFahim said:
Hello to all,I am in a serious trouble with my samsung galaxy player 5.0 International China version . I rooted this with super one click.And it was successful and there was no problem.But as soon as I overwrote a file in lib folder of system,it got stuck.I tapped the power key and the screens light was gone.I again tapped but there was no response.So I held the power key for a while and the device restarted.But it got stuck on samsung logo and began to restart again and again.So I took it to download mode and tried to nand erase with odin,I thought it could format the device and my device would be fixed.But it took some time and I closed odin.Then I held the power key and it restarted with a black screen containing a picture of malfunctioning connection between a phone and computer at its middle.Then I again tried to t-flash it and again closed it without completion because my notebook had no charge.After that I flashed my device with the YP-G70-Kernel-r14 and it restarted with download mode.But if I hold the power key for a while it restart and again go to the brick showing screen(I heard that this brick is called soft brick).I downloaded two stock rom STOCK_G70XXKPH_G70XXKPH_XEF and G70XXKPL_G70XXKPL_XEF.I tried to flash them in my device with odin and they succeeded.But none of them could fix my problem.They remain in download mode and if I hold the power key the device again go to the soft bricked screen.My device isn't force shutting down.If I hold the power key the screen goes and again lights up with the bricked screen.Now,my device has become very hot and after 8-9 hours it has automatically turned off.But if I connect it to the charger it again lighten up with bricked screen.
Now,I am wanting to setup a clean and clear version of android 2.2/2.3.6 in my device.Is it possible?Will this fix my problem?If it does then please explain me the steps.Or if there is any other way to fix then please help me.
N.B. I am junior about andorid root,rom etc.It is the first device I rooted successfully.
Sorry for my bad and wrong English.
Please,help.I am in a bad danger.
Click to expand...
Click to collapse
remove your battery and wait 20 seconds plug in your charger without battery wait for 30 seconds then plug out charger then put your battery battery back then charge it try to turn it on
hope it helps
BFahim said:
Hello to all,I am in a serious trouble with my samsung galaxy player 5.0 International China version . I rooted this with super one click.And it was successful and there was no problem.But as soon as I overwrote a file in lib folder of system,it got stuck.I tapped the power key and the screens light was gone.I again tapped but there was no response.So I held the power key for a while and the device restarted.But it got stuck on samsung logo and began to restart again and again.So I took it to download mode and tried to nand erase with odin,I thought it could format the device and my device would be fixed.But it took some time and I closed odin.Then I held the power key and it restarted with a black screen containing a picture of malfunctioning connection between a phone and computer at its middle.Then I again tried to t-flash it and again closed it without completion because my notebook had no charge.After that I flashed my device with the YP-G70-Kernel-r14 and it restarted with download mode.But if I hold the power key for a while it restart and again go to the brick showing screen(I heard that this brick is called soft brick).I downloaded two stock rom STOCK_G70XXKPH_G70XXKPH_XEF and G70XXKPL_G70XXKPL_XEF.I tried to flash them in my device with odin and they succeeded.But none of them could fix my problem.They remain in download mode and if I hold the power key the device again go to the soft bricked screen.My device isn't force shutting down.If I hold the power key the screen goes and again lights up with the bricked screen.Now,my device has become very hot and after 8-9 hours it has automatically turned off.But if I connect it to the charger it again lighten up with bricked screen.
Now,I am wanting to setup a clean and clear version of android 2.2/2.3.6 in my device.Is it possible?Will this fix my problem?If it does then please explain me the steps.Or if there is any other way to fix then please help me.
N.B. I am junior about andorid root,rom etc.It is the first device I rooted successfully.
Sorry for my bad and wrong English.
Please,help.I am in a bad danger.
Click to expand...
Click to collapse
I don't have a samsung device myself but if you can get in download mode and you can from what you described. What happened is that you deleted a driver (from the lib folder) that was necessary for boot (something important). To get to stock go here http://forum.xda-developers.com/showthread.php?t=2192488 download the right Firmware for your device. And the right pit file (pit file is the partition layout of the device). Flash using the pit file you got. You will fix that. Good luck.
Stock rom and pit file downloaded
cedie said:
remove your battery and wait 20 seconds plug in your charger without battery wait for 30 seconds then plug out charger then put your battery battery back then charge it try to turn it on
hope it helps
Click to expand...
Click to collapse
So,I am in the download mode.I downloaded the firmware (XXXKPL) and the intl pit file.Now what options would be checked in odin and where will I put the firmware file(PDA or Bootloader)?The device has no charge.If I connect to the charger,it wakes up and becomes very hot than normal.And I can't turn it off.Its battery is non-removable.Thank you for your valuable help.

[GUIDE] UNBRICK TAB 3 10.1 P52xx (soft-bricken)

Greetings Guys, so after I brick my device a lot of times and i notice there is a limited guide for beginners on p52xx series.So I wrote this guide to share my experience with you guys the different types of brick i have encountered. Please correct me if i am wrong on something.
scenarios:
1) you flash something wrong, got into boot loop and you are able to get into recovery or download more. Please proceed to Odin or Recovery tutorial below, Section A Option A
2) Your device went dark after you flash something wrong, cannot boot up or you drain your battery during or right after you mod your device and it wont charge up. Please proceed to Section A Option B
3) You did nothing but drain your battery and it won't charge up after 0% and shutdown. Please proceed to section A option A *THIS IS NOT BRICKED SITUATION*
Section A: How to boot it up....
There is few options you can do,
Option A: If you didn't mess your boot partition up. you can leave it drain for like hours to days *I have tried to leave it for 7 to 9 days... and charge it again, keep charging about 30 minute to an hour when you see charging sign, then proceed to Section B if you brick your device. If you don't, just start it up normally and let it charge up to 100% before you discharge.
>Drain the battery by leaving it uncharged for days
>Charge it on, you will see charging sign
>Leave it charge for hours
>you can boot up into normal or follow the tutorial below for flashing firmwares.
Option B: If you mess with your boot partition and cause it, better follow @r2d23cpo 's suggestion.
So here is some tip.
When the device failed boot.img and goes into black screen it can make you think it is broken. But In fact it is in boot "Limbo". So because there is no feedback on the screen (image) You never know where the TAB 3 is with reference of Power OFF, Charging, Download mode Boot mode or Recovery mode.
You will be save if you can get away of the corrupt boot. Then get into download mode and use Odin or get into recovery and use a good update.zip or backup.
So our BEST tool is the Three button Start Sequence to get away from the Boot bad image. The truth is that our TAB does not requires the Home Button to be Press. SO we only use Power.,Vol- and/or Vol+.
Here is the Basic.
Get a Clock that shows seconds.
Disconnect USB Cable from TAB. Tab should have at least little battery power. Why, to ensure you get in Power Off Mode and not unknown charging mode.
* Pressing Power Button for 6 consecutive seconds should reset and bring TAB 3 to Power Off Mode. Pressing Longer can actually confuse the device, because it may go in to Boot again or just Get another reset and loop back. So the secret is to Hold Comfortable & Firm you Tab in you hand to ensure you PRESS continuously but only the required time.. Then Press Firm ONLY the Power Button lets say 7 Seconds NOT MORE then release. You do not Know but know you should be in POWER OFF.
* Now Lets go to Download Mode. For That we need only POWER + Vol- ( Vol- is the Closest to Power). Remember to Hold firm your TAB and buttons. A bad contact will interrupt the process. DO not Press TO HARD, you could damage your buttons. But Here is a tip. You want to ensure that your TAB know you Press the Vol-. For this reason you are going to press Firm FIRST the [Vol-]. Now Keep pressing [Vol-] and press [POWER]. In 3 seconds you should see The Warning and the Triangle of Download Mode. if you get there the use Odin to revive your TAB. I am Attaching an Odin Boot file.
If it fails try again. Press [Power] for 7 seconds. Release. Wait 3 seconds. Press [Vol-] then [Power] for 2 seconds. Then while keeping [Vol-] down release [Power], no more than 3 seconds later ===> Download Mode. Now use Odin file
The same goes for Recovery. But in recovery is [Vol+]
Press [Power] for 7 second. Release. Wait 3 seconds. Press [Vol+]then [Power] for 2 seconds. Then while keeping [Vol+] down release [Power], no more than 3 seconds later ===> Recovery Mode., now use your backup or the update.zip I gave you.
Now let me explain.
* Press [Power] for 7 second. ==> This in fact after 6 seconds trigger Power Off Mode.
* Release. Wait 3 seconds. ==> This ensure that you guys do not trigger Power On or even a second time Power Off.
* Press [Vol+]then [Power] for 2 seconds. ==> Please note that we first press [Vol] so that there is no doubt that you want to Power on in a special mode. You press [Power] for 2 seconds only so that it Power On and in fact do not reach the 6 second for another power off!
* Then while keeping [Vol+] down release [Power] ==> You need to release [Power] so that you do not trigger another Power Off. But need to HOLD [Vol] for about 3 seconds so that it boots in Download or recovery Mode.
Please Note the dilemma. Keeping [Power] press more than necessary will result in a unknown state, depending only in how many the devices in fact triggered Power off and or power On!! That is why you need to observe the timing.
Click to expand...
Click to collapse
Option C: Also suggested by r2d23cpo, Charge your battery separately and see if it works. *I never try that before.* You can actually open up your tab 3 10.1, here is a video, https://www.youtube.com/watch?v=80McioNw3Os
Section B: How to restore back to original firmware with kies or odin
But aware that p5220 p5210 or p5200 are having different firmware and you need to download. So do not completely follow the tutorial in the link below, please check your device model and download the right firmware then you can pretty much follow this tutorial by @Zachisimo:http://forum.xda-developers.com/showthread.php?t=2604681
Firmwares for P52xx *You will need to register* :
Gt-P5200:http://www.sammobile.com/firmwares/database/GT-P5200/
Gt-P5210:http://www.sammobile.com/firmwares/database/GT-P5210/
Gt-P5220:http://www.sammobile.com/firmwares/database/GT-P5220/
For Kies
you can follow this guide by @freakboy13:http://forum.xda-developers.com/showthread.php?t=2261153
If you need a battery replacement, I found one on ebay http://www.ebay.com/itm/T4500C-T450...765?pt=LH_DefaultDomain_0&hash=item5669e27b05
Press that thanks button below if this thread helps, or you can comment here if you need help. I am sure there will be plenty of helpful people to help you here.:good:
If you are interested on kernels stuff visit : http://forum.xda-developers.com/showthread.php?t=2727771
Nice job.
But I have to raise My PERSONAL VIEW. I know many devices when "leave it drain for like hours to days" to see a device recovery itself works. This devices have a FACTORY image that gets to restore them-self when they see corruption. As an example I seen some PALM devices.
But in Samsung devices you only have one and only one boot.img!!! There is no Factory recovery waiting for you. So discharging the device for me IS NOT A VALID OPTION. Believe me. On top our Device may and most likely WILL NOT charge with a corrupted boot.img. So if you leave the device to discharge you will not be able to recharge the battery unless you open the device pull out the battery and charge it alone!!!. So beware. That is my personal opinion. The rest is fine. Good job.
Nice job.
But I have to raise My PERSONAL VIEW. I know many devices when "leave it drain for like hours to days" to see a device recovery itself works. This devices have a FACTORY image that gets to restore them-self when they see corruption. As an example I seen some PALM devices.
But in Samsung devices you only have one and only one boot.img!!! There is no Factory recovery waiting for you. So discharging the device for me IS NOT A VALID OPTION. Believe me. On top our Device may and most likely WILL NOT charge with a corrupted boot.img. So if you leave the device to discharge you will not be able to recharge the battery unless you open the device pull out the battery and charge it alone!!!. So beware. That is my personal opinion. The rest is fine. Good job.
Click to expand...
Click to collapse
thanks @r2d23cpo. There is many options that they can chose. I am going to flash stock firmware, i have no choice as my battery is 0% now, it do charge but weird that after i tried option b every time it boot up it will boot up into recovery, but i will shut down again as its 0% battery. It last a bit longer now somehow its 1~2%.
After i force shutdown and i finally stop the boot looping and what i am going to do is wait for it to charge till 60% maybe and flash it with stock firmware and charge it up to 100%. I have a feelings that i will spoil the battery like this. So i have planed to get a replacement.
just now i will get into recovery by pressing (vol - and power and home) it get into recovery. But now i can get into download mode. I am not going to risk now as its still low on battery.
I actually support your view as it is a risk, or we shall call it a gambling. So your option may be safer, however i have no choice but to bet it on my option as this is the 3rd time i did that.
Thanks for the mention! But honestly I got out of this tablet because there was really no development and it was just outright slow. But if anyone needs anything I still have it!
Thanks for the mention! But honestly I got out of this tablet because there was really no development and it was just outright slow. But if anyone needs anything I still have it!
Click to expand...
Click to collapse
@Zachisimo Press thanks if it helps and if you have the tablet and you are a dev of this model, join us here: http://forum.xda-developers.com/showthread.php?t=2727771 we have some active development going on, it's about kernel development.
Jacker31 said:
Greetings Guys, so after I brick my device a lot of times and i notice there is a limited guide for beginners on p52xx series.So I wrote this guide to share my experience with you guys the different types of brick i have encountered. Please correct me if i am wrong on something.
scenarios:
1) you flash something wrong, got into boot loop and you are able to get into recovery or download more. Please proceed to Odin or Recovery tutorial below, Section A Option A
2) Your device went dark after you flash something wrong, cannot boot up or you drain your battery during or right after you mod your device and it wont charge up. Please proceed to Section A Option B
3) You did nothing but drain your battery and it won't charge up after 0% and shutdown. Please proceed to section A option A *THIS IS NOT BRICKED SITUATION*
Click to expand...
Click to collapse
I have the first scenario with p5200 but i don't know what was wrong I downloaded a stock rom i flashed it with odin and it was all good but the tab keeps rebooting on samsung logo
tried to flash twr and do all the wipes but still rebooting i can access normally download and recovery mode
can u help me?
saba7o0o said:
I have the first scenario with p5200 but i don't know what was wrong I downloaded a stock rom i flashed it with odin and it was all good but the tab keeps rebooting on samsung logo
tried to flash twr and do all the wipes but still rebooting i can access normally download and recovery mode
can u help me?
Click to expand...
Click to collapse
well, check your stock rom if it is the correct one, or try to download custom rom from other thread and try.

Troubleshooting broken S6 Active

Hey all so I'm having trouble with the SM-G890A Galaxy S6 Active. One day the phone just kept going into a restart loop, so I took it into the T-mobile store to see what they could do to fix it as they are my current phone service provider. NOTE: The phone is originally from AT&T. They went through all the different combinations of Power + Volume Up/Down + Home buttons and could not fix the phone. Eventually after messing with it more, they stumbled on the "No command" dead android screen, at that point I just got a new phone. I took the S6 home for further trouble shooting, and was able to use Odin to flash the original firmware successfully.
However, now the phone now get stuck on "Installing update" screen (I've tried leaving it on this screen for 72 hours and it did not complete) when trying to restart the phone.
After trying going into recovery mode, the phone just restarts before I can select any options. I've tried scrolling down to factory reset, but before I can confirm pressing the power button, the phone freezes and restarts.
I've also tried letting the battery die out, and starting over, however, I'm unable to even get the battery charging screen to come up after the phone dies. The phone now always has a white/pink LED on whether the phone is plugged in or not.
I'm not sure where to go from here to fix the phone, any suggestions are greatly appreciated!
PM me for a link to an image of the recovery mode screen as I cannot yet post image links on the forums.
Hi , you can try the following steps :
- First let the battery to discharge out completely 0% if it stays on led light let him like that for 2 days to discharge the battery.
- After that put your phone to Original charger for 3 - 4 hours to be charged.
-Once your phone is charged go to the next step.
- Download this firmware :
https://drive.google.com/file/d/0By7ytf2nnXE8RGREVV9VRGxjNzQ/view
- Once you download extract on Desktop with 7-Zip and put each file to odin one by one (see short video) :
https://drive.google.com/file/d/0B5iuIvmgitAFZFlhU3dqSTdRNm8/view
- Try to put your device into Download mode , VOl - + Home + Power button ....
Good luck
Teddy Lo said:
Hi , you can try the following steps :
- First let the battery to discharge out completely 0% if it stays on led light let him like that for 2 days to discharge the battery.
- After that put your phone to Original charger for 3 - 4 hours to be charged.
-Once your phone is charged go to the next step.
- Download this firmware :
- Once you download extract on Desktop with 7-Zip and put each file to odin one by one (see short video) :
- Try to put your device into Download mode , VOl - + Home + Power button ....
Good luck
Click to expand...
Click to collapse
Hey Teddy, Thank you for the info. I've tried letting the battery die out and re-flashing with a G890A_G890AUCS7DRA2_ATT_USA_v7.0.1 folder found elsewhere. I'll try letting the battery die out again and re-flashing with the source you provided. Cheers.
Hey Teddy, small update, the ZIP file you linked me for the firmware is password protected, would you happen to know the password to unzip the folder?
Hi , try this password: [email protected] or just thonguyen.info .

Categories

Resources