I got a moto XT1023 mono-sim that was purchased in Boston (and frankly I forgot to see what was the original firmware)
So I installed the CM11, but did not work for me because the headset did not work ..
installed again the stock rom, and none of what I tried did the phone signal work, I could upgrade to 4.4.4, but the phone signal did not work.
Until I found the ROM RETUAWS_XT1023_4.4.2_KXC20.82-15_cid9_CFC.xml.zip
(http://bit.ly/1pGmrKp)
And to re-install it, i needed to reset the phone again
And it worked, I went back to have phone sign, worked headphones!
But I cannot upgrade to 4.4.4 and consequently will not update for android 5.
Any help?
I noticed that all rom i've tested and the phone signal didn't work are _cid14_
the rom it worked on my phone, is _cid9_
this link: http://bit.ly/1pGmrKp
There is a 4.4.4 version, does anyone know if you can work?
Because I got tired of resetting the phone and having to install all the apps again, so with unroot the phone to install improvements in battery
Related
Hey. i just today installed a jb 4.2 rom so after i did so i tried to update the modem with a newer one
so after i did i turn on my phone and i have no network i tried restarting and other thing nothing no network
i tried installing the older version i had before that worked..nothing no network
i even tried reinstalling the rom and after that didnt work i went back to the stock rom i had a few houers earlier
still no network just now it says no sim card either....
this android gives me a headache
HELP PLEASE
Ps
i installed UVLI8 and then the trouble started and reverted to XXLPH_REV_02_CL1104396 which worked before
and no my phone is running ICS 4.0.3
I've bought a Samsung SGH-I717 locked with Rogers that's was working perfectly with my Koodo sim on LTE. Here's what happened. I was doing all right, starting by unlocking my phone (First success!). Rooting my phone (Second success!!). Installed CWR (Third success!!!) Why stopping there? I wanted to install LiquidSmooth JB. So, I've started the installation following every steps to the letter. Restart the phone... Hello? No more phone. Just got a nice brick...:crying: So, as a humble guy, I sent it to an unbricker. Don't plan to brick it again so to pay for the JTAG won't have been cost wise. I got my phone back (less 85$ ) but...with the AT&T rom (4.0.4). My problem is that my data isn't working anymore. The WIFI works fine but I won't see the LTE logo next to the WIFI one and as soon as I close the WIFI, no more data. I've tried the plain reflash from Kies. It worked, for the flash, but didn't resolved my data connection issue. I've turned on every things in the Wireless settings, it's not from there, I'm sure. Packet Data and roaming are checked. So, what can be my problem? Just to be sure, do I have to use AT&T rom from now on? No more canadian stuff? Thanks from a desperate guy...
You can install CWR and flash Canadian ROM. The ROM will be already rooted. That liquidsmooth ROM broke lots of phones. The ROM was actually for an S3.
It's worst now. :crying::crying::crying: Since the phone was unrooted, I want to root it again. I've followed this steps : droidgator.com/root-att-galaxy-note-sgh-i717-running-android-4-0 and now... It will only boot up to the Samsung logo. I can at least access the download mode. I'm so [email protected][email protected]$ tired of this.
My friend asked me to look at this phone that was softbricked and kept going to CWM recovery everytime it was booted. I updated the CWM to the latest touch version via ODIN then formatted the phone clean. :good: Then I flashed 4.3.1 stable AOKP ROM and the GApps. It was fine, everything else was working. I connected the wi-fi, used bluetooth, signed into google account everything was normal and stable.:highfive: But then I tried calling and it said "no mobile network". Tried sending a text, could not. I went in and searched for network signals then registered to the correct(I AM SURE!) one.:silly: Still no luck. Then I let it choose automatically. Nothing. Then I thought maybe installing another ROM will somehow fix it and flashed CyanogenMod 10.2 stable. Still no luck. I searched around for a flashable radio but could not decide if that would fix it because as far as I am aware if the radio wasn't working no wireless connectivity should've been either.
The phone is Samsung Galaxy S III GTI9300 white 16GB (unlocked) and has been here in Nepal with Nepal Telecom Sim since it was bought. I have no Idea how the soft brick happened but I think this guy tried to manually update the phone with a stock firmware during which some **** must've happened.
Can you guys please let me know if this could be fixed?
Any help would be highly appreciated.:fingers-crossed::fingers-crossed:
There are hundreds of identical threads, search and read about efs and imei issues.
Sent from my GT-I9300 using Tapatalk
Hi everyone, I have an LG Optimus G (F180K) and I've been using it fine for the last couple years and most recently under the V30D firmware which is KitKat 4.4.2. I've flashed CM11 and MIUI on it previously but restored it to the stock rom several months ago and have stuck with it since. About a week ago I flashed MIUI again as it seemed there were new builds avaliable. The installation went fine but when the phone booted up I realized I didn't have any service and my service provider was not being recognized as it just said "No service". It did show there was a SIM card inside though. So using CWM backup I restored back to my original stock rom and realized there was still no service so I did a clean factory reset. That didn't fix the problem so I tried updating the phone with the kdz files straight from LG's servers which still didn't fix the problem. I checked my IMEI which was not broken and the phone number of my SIM card is recognized but it just always "No service". I tried reverting back to stock rom and factory reset multiple times the past week but it still won't work. Any help? Thanks
Hello.
Please i need your help guys.
My Wife's moto z came with defective bluethoot and was rebooting and freezing, after that i decided to Unlock bootloader and install Lineage rom.
Now Baseband is NOT FOUND and phone Bluethoot reboot phone at boot 3 time before it sucessfully boots and when i try to open settings i got some crashes due to phone tryingto read bluethoot.
Now phone is useless..
MOTO Z SHAREDIAN
Try to reflash stock ROM, try then to update to the current version.
If it doesn't find any update, use this tool:
https://forum.xda-developers.com/moto-z/development/tool-motorola-ota-link-generator-tool-t3537039
Background: I recently flashed a nougat stock rom (retbr on reteu device) and it showed "Baseband: Not Found" (or something like that) in the bootloader. When the latest update was installed, there was something written, and wifi/bluetooth is working well in cuetom rom.