Q&A for Need Asus Memo Pad ME172V Stock Rom
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Need Asus Memo Pad ME172V Stock Rom. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
thank you so much
i have the sam problem as the OP, to be honest i'm not sure what to download and then flash the stock rom even if i have cwm and i rooted it - attempted to fix with ampc mini rom but can't install from external sd, how do i go about flashing the stock rom you linked to - also i assume its the stock file split into rar segments- if that's not what i should be downloading please advise me!
Are these files corrupted or am I doing something wrong?
Hi,
I tried to download the stock roms from the linked www-mediafire-com link. (by the way, a thousand thanks) and uncompress them, but I have a problem with them: I tried the three versions ---
namely DUMP_20130724*, and the two SD_RESTORE* available, and the three chockes when I try to uncompress them on file RESTORE_UTIL_20130724_STOCK_SD/me172v/dump/mmcblk1p1.img.
For example, SD_RESTORE_UTIL_201307....* says:
<code>inflating: RESTORE_UTIL_20130724_STOCK_SD/me172v/dump/mmcblk1p1.img bad CRC 41325ff9 (should be 2607fc6c)</code>
And DUMP_* says:
<code>inflating: LATESTDUMP_20130724_STOCK/mmcblk1p1.img
error: invalid compressed data to inflate</code>
Any hint on what I can be doing wrongly?
I am trying to recover a Asus MemoPad me172v (my daughter's one) which is refusing to boot with the "red triangle" android message. The clean procedure worked ok but still is not booting. Never rooted nor messed with it, so it's a bit of a mistery.
r_mano said:
Hi,
I tried to download the stock roms from the linked www-mediafire-com link. (by the way, a thousand thanks) and uncompress them, but I have a problem with them: I tried the three versions ---
namely DUMP_20130724*, and the two SD_RESTORE* available, and the three chockes when I try to uncompress them on file RESTORE_UTIL_20130724_STOCK_SD/me172v/dump/mmcblk1p1.img.
For example, SD_RESTORE_UTIL_201307....* says:
<code>inflating: RESTORE_UTIL_20130724_STOCK_SD/me172v/dump/mmcblk1p1.img bad CRC 41325ff9 (should be 2607fc6c)</code>
And DUMP_* says:
<code>inflating: LATESTDUMP_20130724_STOCK/mmcblk1p1.img
error: invalid compressed data to inflate</code>
Any hint on what I can be doing wrongly?
I am trying to recover a Asus MemoPad me172v (my daughter's one) which is refusing to boot with the "red triangle" android message. The clean procedure worked ok but still is not booting. Never rooted nor messed with it, so it's a bit of a mistery.
Click to expand...
Click to collapse
you need to root with frank que's tool to restore to the stock dump files, i have the one's i used here [[-wont t me post links....] until i get ten posts but you need to download the files DUMP_20130724_STOCK.ZIP like that .r01, 02, etc
its simple to do once you figure out frank's root process and the restore process i can explain more if needed
Related
[Q&A] [04.12.2012][ICS/JB]Universal Rooting for most phones, Any ROM, now with CWM6
Q&A for [04.12.2012][ICS/JB]Universal Rooting for most phones, Any ROM, now with CWM6
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [04.12.2012][ICS/JB]Universal Rooting for most phones, Any ROM, now with CWM6. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hello, n00b post.
I'm attempting to root my phone using the following method. I've flashed my phone in recovery using odin and philz xwlsy md5 file. What do I need to do next? I'm attempting the following method..
Odin packages instructions: ready for rootThey come in the form of .tar.md5 fileboot into download modestart odin3 and configure it as in picture belowconnect phone in download mode to PC via USBpress start to flash the tar.md5 packageto root, download the root file from here (Method 1) :*http://forum.xda-developers.com/show....php?t=1746794
For most (if not all?) ICS phones having a CWM image atClockworkmod*site:Quoteownload attached*cwm-touch-6.0.x.x-i9100.zipfor the i9100 Galaxy S2.*This is the touch version but it also works with volume up/down keys and power button to select menu.CWM6 is now thought to be probably safe for wipe, no superbrick risks under ICS 4.0.4:*read more hereI also attached the cwm6 non touch version and the*recovery-clockwork-4.0.1.5-galaxys2.zip. CWM4 is also confirmed to be safe for wipe byEntropy512*Recognized DeveloperFor other phones, download the cwm image from here*http://clockworkmod.com/rommanager.Put the previously downloaded*cwm-touch-6.0.x.x-i9100.zip*file on your*external*sd cardDownload the attached root file you want as per instructions aboveI advise Chainfire SuperSU for 2 reasons: it lets you unroot from within superSU application and it lets you migrate to ChainsDD superuser if you like laterCopy the*Root_XXX.zip*file you downloaded tointernal or external*sd cardBoot into stock recovery*(volume up+home+power), and select*"apply update from external storage". Now select the*cwm-touch-6.x.x.x-i9100.zip*file you copied in previous step (this step gives a temporary flash that will disappear after reboot)You get CWM recovery interface (this custom recovery is temporary, not permanent)Inside CWM, select*"install zip from sdcard". Then, select*"choose zip from sdcard". Now, scroll down to the*"Root_XXX.zip"*file and hit power button to install it.It will add SuperSU or Supe
---------- Post added at 12:36 PM ---------- Previous post was at 11:50 AM ----------
So im guessing I use philZ md5 file then boot from the cwm into the root file? Via internal sd ? Is there an easy way without the sd? Thanks
Sorry everyone if my question looks noob,
I'm confused about what method is best suitable for my phone.
I want to root so to have full access and make a backup before upgrading to stock rom 4.1.2.
My phone: Samsung S2 GT-I9100 international, stock rom 4.0.4
What information do you need?
I think that I got all information about my phone but the whole bunch of numbers confuse and scare me a bit.
Thanks in advance.
Edit: even more confused now since my questions didn't appear into the related thread: http://forum.xda-developers.com/galaxy-s2/orig-development/04-12-2012-universal-rooting-phones-rom-t1746794/page64
xda portal sucks balls
look this ****ing crap on the side is pissing me off i cant see what people typed behind it how the **** i **** it off for good or do i just block the **** through element or veiw source worsest **** i have ever seen mnakes me not wont to research on this site plzz help me
rooted OneTouch918D
Hello,
I've rooted the mentioned phone with 'Kingo-Root', which said successfull and installed a 'Superuser'-App.
Then I've installed ROM-Manager sucessfully, but in the recovery mode there is no option 'install zip from SD-card'.
I also can't install custom ROMs, which I found with your website (for example 'deep ROM -zip'). It says 'signature failure...'.
Have I choosen th wrong rooting method, or have I to combine it which other steps afterwards?
I also don't find a cyanogenmod version to install for this phone.
I finally want to get full access and control over all permissions (aim is xprivacy or so), so to ocnfigure every app for my own.
What can you advice me?
[Q&A] [10/13]Brick Station! Here to solve your brickable needs! BOOTLOADERS AVAILABL
Q&A for [10/13]Brick Station! Here to solve your brickable needs! BOOTLOADERS AVAILABLE!!!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [10/13]Brick Station! Here to solve your brickable needs! BOOTLOADERS AVAILABLE!!!. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Still stuck.
EcHoFiiVe said:
READ EVERYTHING BEFORE YOU TRY THIS! TRY AT YOUR OWN RISK! IT'S NOT MY FAULT IF YOU MESS UP ON THIS AND IT GOES TERRIBLY WRONG FOR YOU!
This works.
I will help anyone whenever possible to solve their problems concerning their bricked players. If you can't get it showing up in Odin3 after the Unbrickable Mod, then I'm sorry I can't help you. Every computer is different. Just try to follow the advice. New links are available, so sorry for those that have requested new links! One of the links also contains the bootloaders for the Galaxy Player! Yay! I've saved all the files onto my computer so if a link goes dead, let me know and I'll put it up. Also, if one of the firmwares doesn't work, also let me know and what you tried doing with it.
IF AND ONLY IF you still can't get your player to boot after following this guide, let me know in the comments section what you did in the format:
1.US or INTL
2.What you flashed, with a link to it,
3.What happened AFTER you flashed the above
4.What your device does currently, eg, download mode, CWM only, partial boot, bootloop, no logo.
5.What you tried doing to solve this problem
If you do not follow this format, I WILL NOT RESPOND.
I had my Samsung Galaxy Player hard bricked and I thought all was lost and I thought I had tried everything but I started looking around for some help and ideas on what I could do to fix this problem.
The first thing I did was follow AdamOutlers guide for getting into recovery mode, and that thread can be found here: http://forum.xda-developers.com/showthread.php?t=1386669
Follow those directions and get back to this thread after you've successfully gotten it into download mode.
#Note: If you can't open the Ressurector, install Java onto your flavor of Linux. Then right-click on the resurrector, hit properties and check the Use as executable box or something similar.
*If you already have it in download mode, skip the first step!*
Okay, now that you have it in download mode, you have to get Odin3 for virtualbox. You don't need virtualbox if you can get it into download mode and if youre running Windows XP or higher. If your running Ubuntu or any other flavor of Linux, Heimdall won't work with the SGP and you're going to need virtualbox. The one I used and that worked can be found by going here: http://www.4shared.com/file/10JA2Dsu/Odin3_v183.html--You can get virtualbox for Linux by going here: https://www.virtualbox.org/wiki/Linux_Downloads--YOU WILL NEED YOUR OWN COPY OF WINDOWS FOR VIRTUALBOX!!
Once you have Odin3 running either in Windows or in Virtualbox, then go ahead and plug it into a USB port and a yellow box in Odin3 with a COM number should show up. If not, make sure you have the Samsung USB drivers installed in your copy of Windows in Virtualbox. You can get those here: http://drivers.softpedia.com/get/MOBILES/Samsung/SAMSUNG-USB-Driver-for-Mobile-Phones-1560.shtml-- I had a lot of trouble for my laptop to recognize that my player was plugged in and I had other people tell me the same. I think that in Virtualbox there are settings that have to do with USB devices and getting them recognized inside of Virtualbox. If not, someone let me know. So once you get it into download mode using the resurrector, flash this, IT HAS THE BOOTLOADERS NEEDED, NO MORE SCAMMBLE FOR CORRECT BOOTLOADERS!!!!!!!!!!!!--http://www.4shared.com/get/VtAB8dCU/G70JKKE3_STOK_222RU_.html Flash the one with All-Low or something of the sort.
If you can get it into download mode (Pwr+VolDown+Home) then install this with Odin3: http://forum.xda-developers.com/showthread.php?t=1863004
The first link comes with bootloaders and can get your SGP back up to booting. Once you install that, which is I believe, a Russian Froyo ROM, you must install from the link at the top, which is a stock ROM for us SGP that gets your home button working and is meant for the US variant of the Galaxy Player. It also includes Entropy's Daily Driver kernel and can get you back into CWM if you have a backup available.You need to be in download mode for this too.
BEFORE you install stock though, make sure your Samsung Galaxy Player boots! After that, flash the stock ROM back with download mode using Odin3.
If you have any questions, comments, concerns, feel free to write down below!!
NOTE: I need stock firmware for the 5.0 INTL version, if anyone has it please link it to me and I will post it in the OP.
IF I HELPED YOU, REMEMBER THE THANKS BUTTON!!!!!!!!
Thanks to: AdamOutler, gmillz, Entropy512
Click to expand...
Click to collapse
I've tried exactly what this said, and other variations of this guide and nothing is working. Odin gives a pass ( on 1.81, 1.83, and 1.85 all work) but when it reboots i still have lucky brick. im not sure waht to do...
Q&A for [Firmware] Recovery from a corrupted/missflahed bootloader.
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Firmware] Recovery from a corrupted/missflahed bootloader.. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hey,
I followed the steps and when I type the commands in the console i get the message "command not found"
I made shure the omapflash-lnx file is executable (checked the properties box), i can see "texas instruments" under lsusb and i have installed adb and fastboot. Any advice how to solve this problem. Something i overlooked?
RAZR Encryption unsuccessful error flashing firmware not working
So I bought a used razr maxx (at least thats what the physical characteristics of the phone indicate). Anyway I turn it on to get the EU message, I'm confident this phone was up to JB because the M logo did not say "dualcore" underneath it when booted.
Things I've tried
clear cache/factory reset (appears to finish successfuly but still get EU)
flash firmware RSD (started with JB and worked my way back)
-all JB flashes seemed succesfull up to last step phone reboots to recovery screen (dead android icon)
RSD says rebooting.
cdma_spyder_9.8.2O-72_VZW-16_1ff.xml.zip
cdma_spyder_9.8.2O-72_VZW-16_cfc.xml.zip
VRZ_XT912_9.8.2O-72_VZW-16-5_1FF.xml.zip
VRZ_XT912_9.8.2O-72_VZW-16-5_CFC.xml.zip
Note: fastboot screen says (emmc 16g)
-all other flashes from earlier firmware "ICS / GB" fails first at CDT I believe around step 6 or 7
VRZ_XT912_6.5.1-167_DHD-14_M2-5_CFC_1FF_01.xml.zip
VRZ_XT912_6.5.1-167_DHD-14_M3-8_CFC_1FF_01.xml.zip
VRZ_XT912_6.5.1-73_DHD-11_M1-2_1FF_01.xml.zip
VRZ_XT912_6.5.1-73_DHD-11_TA-3_1FF_02.xml.zip
-read this post and got the idea to modify the XML files https://forum.xda-developers.com/sho....php?t=1796712
-so I tried dropping missing files from the "167_2-5" folders into the jb folder "spyder 16_cfc" then copying the ics xml lines that flash those files and pasting them into the jb xml. Started with webtop, then emstorage (since the "167_2-5" file was like a gig compared to the 40mb jb file, I tried to put the "167_2-5" file under a different file name ahead of the jb emstorage file in the jb xml, I made sure to adjust the filename in jb xml as well. Also tried this with mbr and ebr files from "167_2-5" I believe.
every revision I made to this JB xml seemed to do the exact same thing, flash all the way to the last step then go to the android recovery screen, then eventually boot to the EU screen.
I tried flashing modified older firmware "VRZ_XT912_6.5.1-167_DHD-14_M2-5_CFC_1FF_01.xml.zip" original originally this firmware failed at cdt, so I drop cdt_signed in from the jb folder "spyder 16_cfc", and copied/paste the jb lines for flashing cdt_signed into the "167_2-5xml", still fails at cdt or in this case cdt_signed.
anyway I'm getting rather frustrated... heck I don't even know if this is a 912 anymore what if someone stuck a 910 motherboard in there haha, I would hope flashing would fail much earlier in that case. anyway I've been pretty much shooting in the dark here, this is above my head as far as editing the xml, SOS any help would be awesome. any flashable firmware for jb that would contain everything I would need in the event that says partitions were wiped/corrupted/formatted?
Q&A for [TOOL][NABI] NabiLab GUI - Root, Play, Recovery for JR, XD, 2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL][NABI] NabiLab GUI - Root, Play, Recovery for JR, XD, 2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
XD smartscreen file
In my de-bloating zeal after rooting the XD I deleted the "nabismartscreen" file by mistake... and my sons are not going to be happy. Anyone that can pull and post the file will be my hero. Thanks!
KTCfun1 said:
In my de-bloating zeal after rooting the XD I deleted the "nabismartscreen" file by mistake... and my sons are not going to be happy. Anyone that can pull and post the file will be my hero. Thanks!
Click to expand...
Click to collapse
What software version is tablet on?
We are running Android 4.1.1, kernel 3.1.10-ge0b1727, build JRo03C on his XD. Thanks!
KTCfun1 said:
We are running Android 4.1.1, kernel 3.1.10-ge0b1727, build JRo03C on his XD. Thanks!
Click to expand...
Click to collapse
I meant the "Nabi" software version, sorry about that, my fault. Here is the one for 1.5 though.
Help with Nabi Jr.
Hi folks. First post. The youngest's tablet is stuck on a white screen and out of warranty. Restart is not working (power button and volume+). I got real excited that I could connect with a PC and sure as heck the storage was maxxed. Deleted alot to free things up but no dice. I have also tried running the battery down in hopes of a new boot but no dice. I got excited and downloaded and loaded a update on the micro SD card but that didn't boot... I should also say, that the thing responds to turning off and on and that to me is a sign not to give up. Can someone please point me in the right direction? Wondering if the NabiLab might be able to do a hard reset. If this is possible, I would read up and try it but frankly this android hacking stuff is over my head. Not opposed to ditching Fuhu root as long I get something stable. Thanks in advance! Sarcasm and ridicule encouraged...
Nabilab install
Has anyone verified the Nabilabs download link lately? I'm trying to download it to try and aid in recovery of a bricked Nabi Jr for my son, but keep getting "HTTP redirect" errors. I've disabled the browser security settings and verified my firewall isn't blocking it. Just wanted to make sure the app install was still working correctly before I invested too much time in troubleshooting.
peabody.jones said:
Has anyone verified the Nabilabs download link lately? I'm trying to download it to try and aid in recovery of a bricked Nabi Jr for my son, but keep getting "HTTP redirect" errors. I've disabled the browser security settings and verified my firewall isn't blocking it. Just wanted to make sure the app install was still working correctly before I invested too much time in troubleshooting.
Click to expand...
Click to collapse
It does look like something is broke. I don't have time to look at why tonight. Here is the stand alone version(no installer).
http://forum.xda-developers.com/showpost.php?p=59450453&postcount=2591
Please does anyone have a copy of the NabiLab GUI I have lost my file please please help
Q&A for Elephone p6000_CyanogenMod12.1 based on Android 5.1.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Elephone p6000_CyanogenMod12.1 based on Android 5.1.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Is everything working? Why there is "MT6752_Android_scatter.txt" and not "MT6732_Android_scatter.txt"?
Good ROM CM12.1 for Elephone
Almost everything works fine.
Only issues I encouter (but I can still use the phone quiet well)
* Not found a working recovery - loss of sim card settings and loss of wifi settings after reboot
* GPS not working for me
* screen sometimes stays on
Still a fast an stable ROM :good:
I install Cyanogen ROM and back camera and recovery don't work!!
Hello,
I installed this rom in my P6000, and I think it's a good one.
But I have a problem, I can't root ! I enable the root option (app + adb) in the developper options, but nothing happens ... Root Checker say me it's not rooted.
I loose my IMEI during the flash, and I can't restore them with Chamelephon, because this app need a rooted device. I can't use my phone ...
I tried to download superuser2.49 zip in order to install it in the recovery mode (it's not a custom recovery) from my sd card, but I have a message like "scatter missing" ...
I'm a noob, I'm not a developper, just an android user. My first flash was 2 days ago for my Cube U65GT, and it worked fine !
Thank you if somebody can solve my problem.
PS: and sorry for my bad english ...
Gaou said:
Hello,
I installed this rom in my P6000, and I think it's a good one.
But I have a problem, I can't root ! I enable the root option (app + adb) in the developper options, but nothing happens ... Root Checker say me it's not rooted.
I loose my IMEI during the flash, and I can't restore them with Chamelephon, because this app need a rooted device. I can't use my phone ...
I tried to download superuser2.49 zip in order to install it in the recovery mode (it's not a custom recovery) from my sd card, but I have a message like "scatter missing" ...
I'm a noob, I'm not a developper, just an android user. My first flash was 2 days ago for my Cube U65GT, and it worked fine !
Thank you if somebody can solve my problem.
PS: and sorry for my bad english ...
Click to expand...
Click to collapse
try reflashing the stock rom through SPFT.