Process and info are updated.
apks updated to the last one
S7-701u and S7-702u these two models are exactly the same in terms of hardware, The only difference is that one comes with a clean firmware huawei (701u) and the other comes with bloatware and market operators logo (702u)
Firmware: The s7-701u firmware can be downloaded from huawei website here (617mb) but the s7-702u firmware is privative, and can't be obtained for free... Some pages offer it for money ( for example AssanFile )
A friend from Panama with a s7-702u paid for his operator firmware and share it to me here (617mb) but it comming with some panama operator bloatware and logos.
Note: inside the zip file is a pdf with install instructions, both firmwares are Simcard Unlocked
A )But, what if you want your s7-702u with a fresh and original huawei firmware without bloatware and with original Huawei logos? then you must install the s7-701u firmware inside your s7-702u:
0) Download the s7-701u firmare
1) The tablet need to be rooted
1.1) Install BusyBox
2) Download from attachments this app (English and Spanish) VRCB Changer to patch your tablet id from 702u to 701u. ( Grant root access to the app).
3) unzip you firmware and copy the dload folder to the root of your microsd. (See attached pdf guide )
4) Reboot your tablet and s7-701u firmware will install a fresh and wiped android without bloatware and with original huawei logos (You must backup your data before this)
B) Huawei Tablet S7-701u/s7-702u Hard Reset Guide
1. Press and hold the power button + volume up + volume down.
2. When you feel the vibration,release the power button.
3. When the Android logo appears, release the volume up.
4. You will see some running lines in the Android logo, hold still the volume down and wait for 10 seconds then release it.
5. Then let it reboot by itself.
6. Hard reseting done.
I hope this could help anybody who need this information.
Process and info are updated.
apks updated to the last one
@puntoazul
any further progress for this device regarding custom recovery.?
Thanks.
vwong said:
@puntoazul
any further progress for this device regarding custom recovery.?
Thanks.
Click to expand...
Click to collapse
No :crying:
puntoazul said:
No :crying:
Click to expand...
Click to collapse
Good News!!!!
at 22 July 2015 Huawei was released the kernel source code for the s7-701u... This means that we could being to make or customs roms.
Kernel Source here
This is a good news
Huawei released the s7-701u (Media Pad Youth) kernel source code. This mean that developers can make custom roms
download here
I need help with my device huawei media pad 7 (s7-702u) i tried with the info above but my recovery it's work, went it reboot it close when the logo appear and when a put out the sd card it continues normal
HernG said:
I need help with my device huawei media pad 7 (s7-702u) i tried with the info above but my recovery it's work, went it reboot it close when the logo appear and when a put out the sd card it continues normal
Click to expand...
Click to collapse
is your s7-702u rooted, and have busybox installed and configured?
did you install VRCB_en.apk, and granted root acces?
puntoazul said:
is your s7-702u rooted, and have busybox installed and configured?
did you install VRCB_en.apk, and granted root acces?
Click to expand...
Click to collapse
Is there a firmware for S7-701wa that I can download for free?
Please help
puntoazul said:
This is a good news
Huawei released the s7-701u (Media Pad Youth) kernel source code. This mean that developers can make custom roms
download here
Click to expand...
Click to collapse
Are you still on the way things are still things as either still to come I can not install any ROM for this device (MEDIAPAD 7 YOUTH S7-701U)
Is not there any new terms of this device has become a very bad experience and very slow, and many suffered from cramps and even I do not know how to delete programs involving Huawei that maybe if you delete it becomes a little faster
Please help this device has become very slow Is there a way to make it even a little bit faster
firmware need s7-701u rockchip tool flashable ...
firmware need s7-701u rockchip tool flashable ...
find on a paid website named as update.img if anyone have it than upload it plz
Do you still have the original firmware? I have a bricked s7-702u that won't take the 701 firmware and since it is bricked I can't root it. I would really appreciate it if you could proide me a link with the firmware
i have s7-701u . There are virus . Whether it will remain after the upgrade?
I want to upgrade my mediapad youth s7-701u....please upload ROM
How fix bootloop and how install stock recovery?. I can´t enter into recovery and when I try to flash the stock recovery with fastboot it says failed no permission, I think I have bootloader unlocker it says phone unlocked.
puntoazul said:
Process and info are updated.
apks updated to the last one
S7-701u and S7-702u these two models are exactly the same in terms of hardware, The only difference is that one comes with a clean firmware huawei (701u) and the other comes with bloatware and market operators logo (702u)
Firmware: The s7-701u firmware can be downloaded from huawei website here (617mb) but the s7-702u firmware is privative, and can't be obtained for free... Some pages offer it for money ( for example AssanFile )
A friend from Panama with a s7-702u paid for his operator firmware and share it to me here (617mb) but it comming with some panama operator bloatware and logos.
Note: inside the zip file is a pdf with install instructions, both firmwares are Simcard Unlocked
A )But, what if you want your s7-702u with a fresh and original huawei firmware without bloatware and with original Huawei logos? then you must install the s7-701u firmware inside your s7-702u:
0) Download the s7-701u firmare
1) The tablet need to be rooted
1.1) Install BusyBox
2) Download from attachments this app (English and Spanish) VRCB Changer to patch your tablet id from 702u to 701u. ( Grant root access to the app).
3) unzip you firmware and copy the dload folder to the root of your microsd. (See attached pdf guide )
4) Reboot your tablet and s7-701u firmware will install a fresh and wiped android without bloatware and with original huawei logos (You must backup your data before this)
B) Huawei Tablet S7-701u/s7-702u Hard Reset Guide
1. Press and hold the power button + volume up + volume down.
2. When you feel the vibration,release the power button.
3. When the Android logo appears, release the volume up.
4. You will see some running lines in the Android logo, hold still the volume down and wait for 10 seconds then release it.
5. Then let it reboot by itself.
6. Hard reseting done.
I hope this could help anybody who need this information.
Click to expand...
Click to collapse
How did you guys manage to root? Please share the procedure.
I have Huawei Honor T1-701u
dearbasheer said:
How did you guys manage to root? Please share the procedure.
I have Huawei Honor T1-701u
Click to expand...
Click to collapse
you can use vroot or iroot app
MediaPad 7 Youth Kernel
New link: consumer.huawei.com/en/support/tablets/mediapad_7_youth_en-sup.htm
how can i update my android version
Related
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Question
Hi Jonas,
Sorry to hear that.
Did you totally brick your phone? Can you still go into recovery or Hboot?
Is your phone recognized by adb and fastboot?
If you tell me more, maybe I can help.
Denis
Jonas Kristiansen said:
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Click to expand...
Click to collapse
Same problem
Hello
I have same problem, i brick my K900. I try to start it, but phone is really little ignorant, absolutly not response to all. Flash using xFSTK is without chance.
Yep, Recovery and DroidBoot is unavilable. Phone only one flash touch buttons and nothing more... :crying:
Can you help me? I thing, hard-brick is too hard to solve.
Sorry for my english...
Maybe it will be usefull:
Volume down, hold it, then power button, Testing Menu appear, Droidboot, Recovery, Clear cache, Clear data (factory reset), reboot.
how unbrick ur k900 device
Jonas Kristiansen said:
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Click to expand...
Click to collapse
(my english is veryyyyyyyyyy bad)
dont worry . there is a simple method :
this method work for hardbrick and softbrick too.
first download a favorite Rom you want
u can choice ur Rom from this page : http://m.kaskus.co.id/post/5300581ffbca17d47b8b457c#post5300581ffbca17d47b8b457c
download and install manufacturing flash tool and intel android device usb driver
https://dl.dropboxusercontent.com/u/26833962/K900 Tools/ManufacturingFlashTool_Setup_6.0.2.exe
http://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
second Refer this : http://forum.xda-developers.com/show...postcount=3245
This method require computer with driver and software installed and USB cable for sure
( unzip ur rom and open xml file on ur rom with manufacturing flash tool softwre)
maybe this video can help you too :
https://www.youtube.com/watch?v=BhvA_T694kw
This method works on my hardbrick device succeesfully
tatu63 said:
(my english is veryyyyyyyyyy bad)
dont worry . there is a simple method :
this method work for hardbrick and softbrick too.
first download a favorite Rom you want
u can choice ur Rom from this page : http://m.kaskus.co.id/post/5300581ffbca17d47b8b457c#post5300581ffbca17d47b8b457c
download and install manufacturing flash tool and intel android device usb driver
https://dl.dropboxusercontent.com/u/26833962/K900 Tools/ManufacturingFlashTool_Setup_6.0.2.exe
http://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
second Refer this : http://forum.xda-developers.com/show...postcount=3245
This method require computer with driver and software installed and USB cable for sure
( unzip ur rom and open xml file on ur rom with manufacturing flash tool softwre)
maybe this video can help you too :
https://www.youtube.com/watch?v=BhvA_T694kw
This method works on my hardbrick device succeesfully
Click to expand...
Click to collapse
hi tatu63
Me too got my K900 bricked while updating Rom from MFT .
Its not starting anymore. Complete black screen no menu lights at all.
When i connect my phone to usb cable it shows this in MFT tool and hangs up
07/01/14 12:47:15.886 DEBUG : New Android device -> serial: MedfieldEC710F76 status: 0 port: 1
and
Is there any root for this version of Lenovo Note k52 e78 module, Or is this same as the K5 model ?
Will the current release CM 13 mod by scritch007 would work for this Phone??
http://forum.xda-developers.com/android/development/lenovo-k5-plus-cyanogenmod-13-t3432761
Phone Lenovo K52e78 – ROM Android 5.1
VIBEUI_V3.0_1615_15.518.1_ST_K52e78 – k52_e78-user 5.1 LMY47I
kickace7 said:
Is there any root for this version of Lenovo Note k52 e78 module, Or is this same as the K5 model ?
Will the current release CM 13 mod by scritch007 would work for this Phone??
http://forum.xda-developers.com/android/development/lenovo-k5-plus-cyanogenmod-13-t3432761
Phone Lenovo K52e78 – ROM Android 5.1
VIBEUI_V3.0_1615_15.518.1_ST_K52e78 – k52_e78-user 5.1 LMY47I
Click to expand...
Click to collapse
U found something ? I have same problem .... 1 week of searching but noting found for this Chinese model .
DoBrln said:
U found something ? I have same problem .... 1 week of searching but noting found for this Chinese model .
Click to expand...
Click to collapse
Same problem , But I have found a way to root. Just search for KINGROOT in XDA and use the PC version.
Connect your phone to the PC install the drivers and then youu can root this phone by KINGROOT. I have successfully rooted my device now.
DoBrln said:
U found something ? I have same problem .... 1 week of searching but noting found for this Chinese model .
Click to expand...
Click to collapse
Yes. This is original smartphone for chinese market. It supports all mobile networks in all countries.
After root u changed the ROM ? The recovery is the Chinese version I need to installed another . but I don't find a compatible ROM for this device .
I also have this version of K5 note (K52e78 ). I would like to update to Android 6.0 but havent found a rom yet.
Official ROM update 6.0 k52e78
Download Lenovo Smart Assistant
Connect your phone press UPDATE ( downloading update.rar 1.37 gb ) update fail DONT PANIC
Go to lenovo assistant folder and find UPDATE.RAR copy this RAR in your internal phone memory just in memory no in folder
Reboot your phone in chinese recovery ( vol+ vol- and power )
To translate the recovery use another phone whit google transalte installed and use camera translate from chinese to english
Flash the new UPDATE.RAR automatic reboot
Now your phone is up to date OFFCILAL ROM Android 6.0 Chinese Version
Only Chinese and English ......
Now u Have OTA UPDATE
If u need the UPDATE.RAR send me a mssage . I dont find a file hosting to share it.
Have fun ( im not responsable if u brick or damage your phone )
I have 2 lenovo k5 note k52e78 and the update is working great
Your Phone is still a chinese market phone based on UI not ROW version but is the same
NO ROOT
DoBrln said:
Download Lenovo Smart Assistant
Connect your phone press UPDATE ( downloading update.rar 1.37 gb ) update fail DONT PANIC
Go to lenovo assistant folder and find UPDATE.RAR copy this RAR in your internal phone memory just in memory no in folder
Reboot your phone in chinese recovery ( vol+ vol- and power )
To translate the recovery use another phone whit google transalte installed and use camera translate from chinese to english
Flash the new UPDATE.RAR automatic reboot
Now your phone is up to date OFFCILAL ROM Android 6.0 Chinese Version
Only Chinese and English ......
Now u Have OTA UPDATE
If u need the UPDATE.RAR send me a mssage . I dont find a file hosting to share it.
Have fun ( im not responsable if u brick or damage your phone )
I have 2 lenovo k5 note k52e78 and the update is working great
Your Phone is still a chinese market phone based on UI not ROW version but is the same
NO ROOT
Click to expand...
Click to collapse
I converted from Chinese and English ROM to an international one that is custom and I lost my IMEIs. I know that I can restore them with Maui Meta tool, but I can't for the life of me get it to connect with the tool. I always get stuck on a screen that says "phone has been in meta mode. Long press power button to boot normally". Any ideas what I might be doing wrong? Should I press any button when connecting the phone to USB?
Thanks for your help
Sent from my Nexus 5X using Tapatalk
I was able to connect it in metamaui version 9.1548, I did as follows:
- I opened the program and clicked on reconnect
- I turned off the phone
- I connected the cable (the first time it failed pos was installing the driver, I disconnected the cable reconnected and in 10 seconds it was already connected.
Now I have another problem, did you get the db files to insert the imei? If you have found the file, please let me know the link, because I have everything working but my device is without imei
tassos_chry said:
I converted from Chinese and English ROM to an international one that is custom and I lost my IMEIs. I know that I can restore them with Maui Meta tool, but I can't for the life of me get it to connect with the tool. I always get stuck on a screen that says "phone has been in meta mode. Long press power button to boot normally". Any ideas what I might be doing wrong? Should I press any button when connecting the phone to USB?
Thanks for your help
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
kmastrath said:
I was able to connect it in metamaui version 9.1548, I did as follows:
- I opened the program and clicked on reconnect
- I turned off the phone
- I connected the cable (the first time it failed pos was installing the driver, I disconnected the cable reconnected and in 10 seconds it was already connected.
Now I have another problem, did you get the db files to insert the imei? If you have found the file, please let me know the link, because I have everything working but my device is without imei
Click to expand...
Click to collapse
Couldn't even get it to connect with Meta MAUI even after 50 times at least, so I can't really help you. But you can find stock chinese ROMs here: http://lenovo-forums.ru/topic/20032-китайские-официальные-прошивки-для-vibe-k5-notek52e78/
Maybe you can get the db files from these ROMs
Thanks for link, you have try in another computer? My pc with windows 10, he instaled, but I need reboot then and enable install drivers for third...
Tassos, thanks, for me it worked, I used the modem file that was in the link that you gave me and I was able to restore the imei perfectly. I'm grateful to you, I work more with computers than with cell phones, maybe I need some help to connect your cell phone, I'm available, if you need me to connect your phone, I can even help you with teamviewer. Thank you
DoBrln said:
Download Lenovo Smart Assistant
Connect your phone press UPDATE ( downloading update.rar 1.37 gb ) update fail DONT PANIC
Go to lenovo assistant folder and find UPDATE.RAR copy this RAR in your internal phone memory just in memory no in folder
Reboot your phone in chinese recovery ( vol+ vol- and power )
To translate the recovery use another phone whit google transalte installed and use camera translate from chinese to english
Flash the new UPDATE.RAR automatic reboot
Now your phone is up to date OFFCILAL ROM Android 6.0 Chinese Version
Only Chinese and English ......
Now u Have OTA UPDATE
If u need the UPDATE.RAR send me a mssage . I dont find a file hosting to share it.
Have fun ( im not responsable if u brick or damage your phone )
I have 2 lenovo k5 note k52e78 and the update is working great
Your Phone is still a chinese market phone based on UI not ROW version but is the same
NO ROOT
Click to expand...
Click to collapse
can u share the update.rar
DoBrln said:
Download Lenovo Smart Assistant
Connect your phone press UPDATE ( downloading update.rar 1.37 gb ) update fail DONT PANIC
Go to lenovo assistant folder and find UPDATE.RAR copy this RAR in your internal phone memory just in memory no in folder
Reboot your phone in chinese recovery ( vol+ vol- and power )
To translate the recovery use another phone whit google transalte installed and use camera translate from chinese to english
Flash the new UPDATE.RAR automatic reboot
Now your phone is up to date OFFCILAL ROM Android 6.0 Chinese Version
Only Chinese and English ......
Now u Have OTA UPDATE
If u need the UPDATE.RAR send me a mssage . I dont find a file hosting to share it.
Have fun ( im not responsable if u brick or damage your phone )
I have 2 lenovo k5 note k52e78 and the update is working great
Your Phone is still a chinese market phone based on UI not ROW version but is the same
NO ROOT
Click to expand...
Click to collapse
Thanks so much man, This worked like a charm. Instead of going to chinese recovery mode. I used clockworkmod app and flashed the upgrade.zip file. And worked like a charm. Gets the OTA upgrades and all. Thanks So much.
DoBrln said:
Download Lenovo Smart Assistant
Connect your phone press UPDATE ( downloading update.rar 1.37 gb ) update fail DONT PANIC
Go to lenovo assistant folder and find UPDATE.RAR copy this RAR in your internal phone memory just in memory no in folder
Reboot your phone in chinese recovery ( vol+ vol- and power )
To translate the recovery use another phone whit google transalte installed and use camera translate from chinese to english
Flash the new UPDATE.RAR automatic reboot
Now your phone is up to date OFFCILAL ROM Android 6.0 Chinese Version
Only Chinese and English ......
Now u Have OTA UPDATE
If u need the UPDATE.RAR send me a mssage . I dont find a file hosting to share it.
Have fun ( im not responsable if u brick or damage your phone )
I have 2 lenovo k5 note k52e78 and the update is working great
Your Phone is still a chinese market phone based on UI not ROW version but is the same
NO ROOT
Click to expand...
Click to collapse
if u r rooted on lolipop and want to update without losing root flashfire app will help i guess
its from chainfire
pls confirm that it can update using flash fire without losing root
kickace7 said:
Thanks so much man, This worked like a charm. Instead of going to chinese recovery mode. I used clockworkmod app and flashed the upgrade.zip file. And worked like a charm. Gets the OTA upgrades and all. Thanks So much.
Click to expand...
Click to collapse
How did you use clockworkmod app to flash upgrade.zip if your phone isn't rooted and IF it is rooted, please please post how you did it. I have been looking for it all over the web and i couldn't find a way. KingoRoot & KingRoot doesn't seem to work. I tried to Android & PC versions none of them are able to root lenovo k52e78.
It would be greatly appreciated. Thanks
Btw, I have the marshmallow 6.0 k52e78
Pls heeeelp
DoBrln said:
Download Lenovo Smart Assistant
Connect your phone press UPDATE ( downloading update.rar 1.37 gb ) update fail DONT PANIC
Go to lenovo assistant folder and find UPDATE.RAR copy this RAR in your internal phone memory just in memory no in folder
Reboot your phone in chinese recovery ( vol+ vol- and power )
To translate the recovery use another phone whit google transalte installed and use camera translate from chinese to english
Flash the new UPDATE.RAR automatic reboot
Now your phone is up to date OFFCILAL ROM Android 6.0 Chinese Version
Only Chinese and English ......
Now u Have OTA UPDATE
If u need the UPDATE.RAR send me a mssage . I dont find a file hosting to share it.
Have fun ( im not responsable if u brick or damage your phone )
I have 2 lenovo k5 note k52e78 and the update is working great
Your Phone is still a chinese market phone based on UI not ROW version but is the same
NO ROOT
Click to expand...
Click to collapse
Hi. Could you sent me that file? Because if i download the Lenovo smart assistant and connat my phone and the i click on UPDTE ROM , then it fails on 0% of the download and i cant download the file . Also it says at InStorage 0/0.
I would be good if you could send me those files or just a fix for it.
mysticalmight said:
How did you use clockworkmod app to flash upgrade.zip if your phone isn't rooted and IF it is rooted, please please post how you did it. I have been looking for it all over the web and i couldn't find a way. KingoRoot & KingRoot doesn't seem to work. I tried to Android & PC versions none of them are able to root lenovo k52e78.
It would be greatly appreciated. Thanks
Btw, I have the marshmallow 6.0 k52e78
Click to expand...
Click to collapse
I was only able to root lollipop version, not marshmallow. :crying:
DoBrln said:
Download Lenovo Smart Assistant
Connect your phone press UPDATE ( downloading update.rar 1.37 gb ) update fail DONT PANIC
Go to lenovo assistant folder and find UPDATE.RAR copy this RAR in your internal phone memory just in memory no in folder
Reboot your phone in chinese recovery ( vol+ vol- and power )
To translate the recovery use another phone whit google transalte installed and use camera translate from chinese to english
Flash the new UPDATE.RAR automatic reboot
Now your phone is up to date OFFCILAL ROM Android 6.0 Chinese Version
Only Chinese and English ......
Now u Have OTA UPDATE
If u need the UPDATE.RAR send me a mssage . I dont find a file hosting to share it.
Have fun ( im not responsable if u brick or damage your phone )
I have 2 lenovo k5 note k52e78 and the update is working great
Your Phone is still a chinese market phone based on UI not ROW version but is the same
NO ROOT
Click to expand...
Click to collapse
can you please send me the UPDATE.RAR? i can't download it
I'm trying to get the UPDATE.RAR file using LMSA version 3.1.0.24, but it says my version is up to date (5.1 lollipop). Could you send me the UPDATE.RAR file for Android 6? Send to "[email protected]"
I tried to change the Chinese Firmware to Global firmware to (Meizu Pro 7) and now I have a problem.
I followed this guide on this web:
chinahandys .net (I can't copy the link here since I have a new user
and so I deleted the file "boot.img"
I also couldn't open the Update.zip file with Winrar or another archive program.
then, I tried to do this :
"10. In FlashFire, select the small plus icon at the bottom right and select “Flash ZIP or OTA”. Select the “update.zip” file and confirm the pop-up with the tick at the top right"
but I couldn't find the “update.zip” file there.
finally, I tried to open the update.zip by pressing "Update".
since then my phone won't start.
The only thing i can do is pressing the "plus" button and another button below which will lead to me to a screen of Updating the system. when I try to do it's wrong because "firmware not found".
My phone is stock on the screen "flyme".
please help me!! I just bought this phone
(danhdongufixer) he is on Facebook.... He single handily brought my pro 7 plus back from the dead get ahold of him he's wizard .
I had same problem and this guy fixed my phone get in touch with him because there is nothing else you can do meizu left a lot of us hanging for over 3 months and no help . Good luck
You maybe don't use the good Firmware
maorsah said:
I tried to change the Chinese Firmware to Global firmware to (Meizu Pro 7) and now I have a problem.
I followed this guide on this web:
chinahandys .net (I can't copy the link here since I have a new user
and so I deleted the file "boot.img"
I also couldn't open the Update.zip file with Winrar or another archive program.
then, I tried to do this :
"10. In FlashFire, select the small plus icon at the bottom right and select “Flash ZIP or OTA”. Select the “update.zip” file and confirm the pop-up with the tick at the top right"
but I couldn't find the “update.zip” file there.
finally, I tried to open the update.zip by pressing "Update".
since then my phone won't start.
The only thing i can do is pressing the "plus" button and another button below which will lead to me to a screen of Updating the system. when I try to do it's wrong because "firmware not found".
My phone is stock on the screen "flyme".
please help me!! I just bought this phone
Click to expand...
Click to collapse
Hi,
For 3 month, I hope you have find the solution. If you don't, here is mine :
I had the same problème on my phone.
I couldn't reinstall it, I think the version that I downloaded wasn't compatible with the "Chinese" version of my mobile.
You need to find the good firmware !
Could you try with this chinese firmware : MEIZU PRO7 Standard Version -Flyme6.1.3.2A-7.0
It's worked on my phone.
So,
Press and hold the volume up and power button until the screen goes on recovery mode.
Connect the device to the laptop or PC, you can open the device. You will see an empty partition named recovery.
Now copy the downloaded firmware of your phone and place it in the recovery partition. Just copy update.zip to recovery partition.
Now in the phone select update firmware and clear data and press next.
The phone will reboot and install the firmware.
Wait, wait, wait 15mn be patient.
tell me if it's working on your phone.
excuse me for my poor English !
Math32 said:
Hi,
For 3 month, I hope you have find the solution. If you don't, here is mine :
I had the same problème on my phone.
I couldn't reinstall it, I think the version that I downloaded wasn't compatible with the "Chinese" version of my mobile.
You need to find the good firmware !
Could you try with this chinese firmware : MEIZU PRO7 Standard Version -Flyme6.1.3.2A-7.0
It's worked on my phone.
So,Press and hold the volume up and power button until the screen goes on recovery mode.
Connect the device to the laptop or PC, you can open the device. You will see an empty partition named recovery.
Now copy the downloaded firmware of your phone and place it in the recovery partition. Just copy update.zip to recovery partition. Now in the phone select update firmware and clear data and press next.
The phone will reboot and install the firmware.
Wait, wait, wait 15mn be patient.
tell me if it's working on your phone.
Click to expand...
Click to collapse
Hello!
Was everything, such as google playstore and english language, still working on you phone after you updated the firmware?
I was also wondering if theres need to backup the IMEI somewhere?
Im currently running a modified verision of 6.1.3.2A which doesnt have all the features for the 2nd display and hence looking for an upgrade.
Leone1 said:
Hello!
Was everything, such as google playstore and english language, still working on you phone after you updated the firmware?
I was also wondering if theres need to backup the IMEI somewhere?
Im currently running a modified verision of 6.1.3.2A which doesnt have all the features for the 2nd display and hence looking for an upgrade.
Click to expand...
Click to collapse
I used this chinese version less than 10mn. I would advise you to install the G firmware !
I didn't install the playstore (too thing in chinese in this firmware) that's why after running the version 6.1.3.2A, i used this tutorial :
https://forum.xda-developers.com/showpost.php?p=75297402&postcount=70
"Download the firmware Flyme 6.1.3.2G from here
http://www.flymeos.com/firmwarelist?modelId=88&type=1
after you can do the instructions in video
https://www.youtube.com/watch?v=aDp6oZL4Wx4 "
Be careful when you install superSU to do the same thing as in the video. I don't do the same than on the vidéo that's why i need to reinstall the chinese firmware. After the installation i wait 15mn and my phone stays on Flyme. i restart it and it worked for installing busybox and flashfire.
I wish you bon courage !
Math32 said:
I used this chinese version less than 10mn. I would advise you to install the G firmware !
I didn't install the playstore (too thing in chinese in this firmware) that's why after running the version 6.1.3.2A, i used this tutorial :
https://forum.xda-developers.com/showpost.php?p=75297402&postcount=70
"Download the firmware Flyme 6.1.3.2G from here
http://www.flymeos.com/firmwarelist?modelId=88&type=1
after you can do the instructions in video
https://www.youtube.com/watch?v=aDp6oZL4Wx4 "
Be careful when you install superSU to do the same thing as in the video. I don't do the same than on the vidéo that's why i need to reinstall the chinese firmware. After the installation i wait 15mn and my phone stays on Flyme. i restart it and it worked for installing busybox and flashfire.
I wish you bon courage !
Click to expand...
Click to collapse
Ah ok, so you only used it to be able to flash the global rom on?
Ive read multiple places that its not possible to update from A to G, thats why i was thinking about going to the 7.0.0.0A ROM instead. The shop i bought it from (CECT, who are not very well informed at all) told me it would brick the phone to go to G from A, my phone is apparently not intended for global sale thats why they make their own version and flashes it on...
So now im just looking for someone who can confirm that updating to the A-rom wont remove google play or english.
EDIT: I have the Helio P25 model
SORRY WAS INACTIVE FOR SOMETIME... NOW IM BACK YOU CAN ASK AGAIN...
ALL CHIPSETS UNBRICKING METHOD HAS BEEN POSTED
Hi you may ask me anything related to android and I promise to answer within 24 hours and m reply will definitely work for you.
*****************************************************
SPECIALIST IN ROOTING, DEVELOPMENT, HACKING, SECURITY BYPASS, RECOVERY, FLASHING, CUSTOM ROM'S
*****************************************************
SEE YOU SOON
*****************************************************
•NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR DEVICE•
LG Aristo v10g Metropcs
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Mephis96 said:
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Click to expand...
Click to collapse
You mean to say that the phone is in frp mode?
(Factory reset protection)
Yes
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Mephis96 said:
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Click to expand...
Click to collapse
Can you please tell me the phone model and it's info.
LG Aristo v10g from Metropcs
x.ak**** said:
Can you please tell me the phone model and it's info.
Click to expand...
Click to collapse
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
[PC] HOW TO CURE A BRICKED M-TEK DEVICE!!
///////////////////////////////////////////////////////////////////////////////////////////
• Download and Install the Android USB drivers for your device that I have mentioned below.
• Power Off your device and remove the battery (only if it's removable)
• Download the stock ROM or the Custom ROM on your PC that you want to flash. (GIVEN BELOW)
• Download and extract SPFT (Smart Phone Flash Tool) on your PC, you will be able to see the files shown in the picture below. (Pic 1.1)
• Open Flash tool.exe (Pic 1.2)
• Once SPFT is launched tap on Download tab. (Pic 1.3)
• In download tab click on Scatter-Loading button. (Pic 1.4)
• Now locate the Scatter File that you will find in the Stock ROM folder that you downloaded in step 3. (Pic 1.5)
• Click on Download button to start the flashing process.(Pic 1.6)
• After finishing a success message will appear. (Pic 1.7)
///////////////////////////////////////////////////////////////////////////////////////////
Downloads:-
https://androiddatahost.com/b9cyw (DRIVERS)
https://spflashtool.com/download/SP_Flash_Tool_v5.1744_Win.zip (SPFT)
https://www.needrom.com/download/lenovo-s850/ (ROM FOR LENOVO S850, REGISTRATION NEEDED ON WEBSITE TO DOWNLOAD THE ROM)
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
I was working on another project that you can see below give me 1 hour I'll get back to you ASAP.
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
How to BYPASS FRP LOCK!
Test conducted on Virtual Machine on my PC
****************************************************************
I am not responsible for any damage you may cause to your device!
****************************************************************
****************************************************************
Never wanted to upload it but did it because I aim at helping people.
****************************************************************
Google FRP (factory reset protection) is aimed at making a stolen phone less valuable.
We usually keep our phones locked with a password or pattern but once its stolen it is easy to erase the data (via Hard Reset) and reuse the phone. With Google FRP in place, whenever the phone is formatted using hardware keys it will ask for the last synced google account details before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Until now, everytime some sort of hack comes out to bypass this screen and then its patched with a security update very soon. Same is the case with LG Aristo. There is a working solution as of now but it may not last long. Let’s see how to get this working –
///////////////////////////////////////////////////////////////////////////////////////////
How to Bypass LG Aristo Google Account –
This process is lengthy, but it’s a sure shot method and works every time.
We need 2 apps to complete this bypass process. They are Shortcut Master Lite and Sidebar Lite. Download the zip file from below link.
DOWNLOAD
>Extract the zip file and transfer the apk files to a micro sd card. Install the SD card in your LG Aristo before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
Done
Drop a like on all my replies so I can stay encouraged and help you further.
YeshYyyK said:
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Click to expand...
Click to collapse
You may use Kernel Manager it's super useful and will do what you're asking for!
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
antoflos said:
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
Click to expand...
Click to collapse
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
It resulted that my phone was stocked on the S7 edge logo. Luckly I can go on download mode so it's not hard bricked but Odin failed on every flash I've tried. It stoped at the step "config.msi"
To flash I used this dock Rom : SM-G935F_1_20161201150115_pbdym44h2s_fac
x.ak**** said:
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Click to expand...
Click to collapse
Hey man this quite difficult and i need to install this phone's firmware on my VIRTUAL Machine, basically I request you to wait for the time being so I can save your phone.
Drop a like on all my comments above to encourage me.
Huawei P10+ Firmware on Huawei P10 - by accident
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
antoflos said:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
Click to expand...
Click to collapse
***********************************************************************************
I AM NOT RESPONSIBLE FOR ANY FURTHER DAMAGE THAT MAY BE CAUSED TO YOUR DEVICE...(UNLIKELY TO HAPPEN)
***********************************************************************************
For being able to make the downgrade operation you will have to use a Windows based computer on which you will then install Odin (an official program developed by Samsung and used on update types of operations).
***********************************************************************************
Download Odin on your computer; afterwards install the program by following on screen prompts.
The Samsung Galaxy S7 Edge USB drivers must be installed on your PC too – use Samsung KIES in that respect.
Download the stock / official Android OS for your S7 Edge – from SamMobile or from Samsung’s official website.
Power off your device and reboot into download mode: press and hold the Power, Volume Down and Home buttons for a few moments; then connect your phone with your computer with the help of the USB cable.
After making sure that Odin has recognized your device (the “added” message must be displayed and the ID:COM field should be turned yellow or blue) from the program select the PA option.
Load the firmware file; don’t select the Re Partition and Auto Reboot options; click on Start when done.
Wait while your SGS7 Edge is being updated; when done, remove the USB cord and reboot your phone.
For further info related to the update process reply to my thread
LIKE ALL MY COMMENTS TO ENCOURAGE ME TO HELP YOU.
xironimoh said:
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
Click to expand...
Click to collapse
No pictures attached!! and yes you can roll back to the stock ROM or even customize the DPI according to your phone [ROOT REQUIRED]
Let me know which one you prefer?
Also like all my comments above to encourage me to help you even faster.
Hello everyone. A couple of days ago, I bricked my huawei mate 10 pro BLA-AL00 by flashing the wrong firmware. After a few days of experimentation, I was able to revive the phone by flashing the board software back onto the phone. Now the problem is that I am on a super early build of emui and it seems like its the stock factory software with a bunch of debugging programs on it. I am having some trouble updating the firmware to android 8. I downloaded this exact firmware file: https://androidhost.ru/bzx
I am having some trouble figuring out what files I need to flash. There is a main dload folder after extracting the files, but if I try to copy that onto a usb drive and flash it using the dload method, my phone will once again brick itself. I have tried flashing the all_cn firmware file using TWRP recovery, but that also bricks my device and puts it into a bootloop. I have also tried using the huawei update file extractor software and tried manually flashing the firmware using fastboot commands, but once again will just end up in a bootloop. Am i doing something wrong? I would really appreciate any help. Thanks
Hi,
I'm in the exactly same case. Did you manage to fix it?
iBen68 said:
Hi,
I'm in the exactly same case. Did you manage to fix it?
Click to expand...
Click to collapse
I finally managed to figure everything out after days of research and testing. You must download the BLA-AL00 8.1.0.351 full ota firmware from pro-teammt.ru and extract the update.zip folder. Next, I used MRT Dongle 3.19 cracked to flash the firmware. https://www.gadgetsdr.com/mrt-dongle-latest-crack/ To activate the program, you must use the keygen provided to generate a activation code after pasting in your device id. The device id can be found by opening the mrt program for the first time. Paste in the activation code found by the keygen into the activator and the program should open. Next, click on hw flasher and put your phone into fastboot mode. Make sure your bootloader is unlocked. I assume it is unlocked as you only flashed the board firmware. Under write flash click on the 3 dots near the bottom of the page, select the update.app file you extracted before, and click on start. Don't worry if it says fail for the first few commands. It should successfully flash everything else. Once this process is finished, your phone should reboot. We need to do one final step and write the oeminfo back into the phone. Put your phone back into fastboot mode by plugging in your phone and holding down the power and volume down buttons. In MRT, click on update hw soft_ver, select huawei mate 10 pro, and click on start. After flashing, your phone should reboot normally now into an operating system!!!
Thank you for your answer ! My Mate 10 Pro is BLA-L09, how did you know you have to use this specific firmware (BLA-AL00 8.1.0.351 full ota firmware) for your BLA-AL00? I guess I should use BLA-L09 full ota but which version?
iBen68 said:
Thank you for your answer ! My Mate 10 Pro is BLA-L09, how did you know you have to use this specific firmware (BLA-AL00 8.1.0.351 full ota firmware) for your BLA-AL00? I guess I should use BLA-L09 full ota but which version?
Click to expand...
Click to collapse
It took me a very long time and a large amount of downloading to figure out the exact firmware I needed to use. I just downloaded a bunch of version and see if it would flash onto my phone. Finally, the 8.1.0.351 firmware worked! For the bla-l09, im not too sure the exact version needed. I would experiment around and try a bunch of different full ota firmware from pro-teammt.ru Maybe you could flash the bla-al00 firmware and rebrand the phone? Im not too familiar with rebranding, but I know its possible.
I have tried with BLA-L09 8.0.0.115 firmware then my phone has reboot in a better factory version (EMUI 8 instead of EMUI 5), but still in factory mode, with the developpers apps. I've done the hw soft_ver update, but it still boot on this factory version. I've tried to flash another firmware (still BLA-L09 but another version), and now my phone stays shut down. I cannot even see it on my COM port. I've tried to use test point, I can hear the USB plug computer song but nothing happen. Phone no detected, black screen, no vibration. I've tested all the possible key combinaison (volume up, volume down, power button), still nothing .
Any idea of a last chance?
I was so close thank to your help!