Hi everyone, I've been lurking around here unregistered since I got my first Android device last year, namely the ZTE Blade.
Now however, I'd love to get help because somehow I've managed to make my brand-new tablet not to boot, and I seek expertise from the experts.
I've searched around both Google and here on XDA, but haven't found anything because I don't know how to search for it, due to the fact that the error is in Chinese.
So to make a story short I just arrived today from a trip in HongKong.
I was very pleased with my ZTE Blade so I decided I'd buy a cheap Android-running tablet during my stay, and so I did.
I got myself an "Acho C908", which I tested in the store first. May be an unknown brand, but it's a really nice tablet.
It sure has nice specifications and I was pleased with the performance for the price I payed, however I managed to make things worse.
Everything was going good except I couldn't install any apps in Playstore, I always got the “Error Processing Purchase DF-BPA-09″. So I searched this error up and found the guide: ...technipages.com/google-play-error-processing-purchase.html
I followed the guide and cleared the data from Google Services Framework. However, after doing so things got bad. My tablet began to freeze so I restarted it. After it booted the "explorer" (forgot the name in Android, refering to Windows-term) didn't answer and crashed and the tablet froze again.
So I rebooted it again and here's where I got stuck.
The thing is that I don't seem to have bricked my tablet, because I'm able to pass the boot logo, however I'm getting stuck at something else. The worse thing is that because of the tablet being a Chinese one, the text is in Chinese! However, this happened to me at the airport when I was heading back from HongKong so I managed to ask some Chinese people.
Here's the "error".
XXX.img692.imageshack.us/img692/4594/tableth.jpg
(please replace the XXX with WWW)
From what the Chinese people I asked told me, it says something about "Password Failure" and that I would need to "Reset to Default Settings"?
I have tried to enter some sort of Factory Settings/Hard Reset mode, but holding Volume+ or Volume- or both together during turn on of the device yielded nothing but getting stuck at the first logo during start-up, namely "ACHO".
So do you have any guesses on what to do?
I actually bought two of these tablets, one for me and one for my father. So if there's any information on the working tablet you would need to help me, I would be able to provide you with that.
I'd love to get my new tablet working.
Thank you very much in advance.
Best Regards
Nikkop
acho c98
nikkop said:
Hi everyone, I've been lurking around here unregistered since I got my first Android device last year, namely the ZTE Blade.
Now however, I'd love to get help because somehow I've managed to make my brand-new tablet not to boot, and I seek expertise from the experts.
I've searched around both Google and here on XDA, but haven't found anything because I don't know how to search for it, due to the fact that the error is in Chinese.
So to make a story short I just arrived today from a trip in HongKong.
I was very pleased with my ZTE Blade so I decided I'd buy a cheap Android-running tablet during my stay, and so I did.
I got myself an "Acho C908", which I tested in the store first. May be an unknown brand, but it's a really nice tablet.
It sure has nice specifications and I was pleased with the performance for the price I payed, however I managed to make things worse.
Everything was going good except I couldn't install any apps in Playstore, I always got the “Error Processing Purchase DF-BPA-09″. So I searched this error up and found the guide: ...technipages.com/google-play-error-processing-purchase.html
I followed the guide and cleared the data from Google Services Framework. However, after doing so things got bad. My tablet began to freeze so I restarted it. After it booted the "explorer" (forgot the name in Android, refering to Windows-term) didn't answer and crashed and the tablet froze again.
So I rebooted it again and here's where I got stuck.
The thing is that I don't seem to have bricked my tablet, because I'm able to pass the boot logo, however I'm getting stuck at something else. The worse thing is that because of the tablet being a Chinese one, the text is in Chinese! However, this happened to me at the airport when I was heading back from HongKong so I managed to ask some Chinese people.
Here's the "error".
XXX.img692.imageshack.us/img692/4594/tableth.jpg
(please replace the XXX with WWW)
From what the Chinese people I asked told me, it says something about "Password Failure" and that I would need to "Reset to Default Settings"?
I have tried to enter some sort of Factory Settings/Hard Reset mode, but holding Volume+ or Volume- or both together during turn on of the device yielded nothing but getting stuck at the first logo during start-up, namely "ACHO".
So do you have any guesses on what to do?
I actually bought two of these tablets, one for me and one for my father. So if there's any information on the working tablet you would need to help me, I would be able to provide you with that.
I'd love to get my new tablet working.
Thank you very much in advance.
Best Regards
Nikkop
Click to expand...
Click to collapse
try to download the new firmware here:
http://www.acho.com/downc.asp?ID=3476
put it in sd card
boot the tablet in recovery mode (vol- and on)
launch "update frome external card
reboot
I don' remember al the steps: please read the istruction on achos site too, at the same link above
bye
Hi Folks,
My tablet (GT-P7510 16gb) starts working really weird two or three months ago, (flickering screen by moments) nowdays the tablet is impossible to use because i am not able to see anything, so i have tried a lot of firmwares putting the tablet in recovery mode by guessing when to press the up volume becuase the screen is not showing anything or elegible things but i am not having any luck.
The back of the tablet says made from korea but when check samsumg DB there is not korea's firmware to download.
I have tried the thread wheres explain how to remove the flickering issues, but none of the fixed.
Any ideas on how to know my stock firmware? because after trying too many firmware i can't remember what is the correct one to use and search for it.
Thanks in advance. :good:
Best Regards :laugh:
hi anyone knowns how to do that?
thanks in advance.
Sent from my XT925 using xda app-developers app
lhernand45 said:
hi anyone knowns how to do that?
thanks in advance.
Sent from my XT925 using xda app-developers app
Click to expand...
Click to collapse
Had same problem, this worked for me:
You Need:
PhoenixSuit
1) Install PhoenixSuit
2) Disconnect USB
3) Shut down tablet (Hold power for 10 sec)
4) Press and hold Home-button
5) Connecting USB (keep holding down Home button)
6) Press Power button 10-15 timer (While still holding down Home)
Now 1 of 2 thing happen
If 1: PhoenixSuit pops up and askes, want to reset? - Press yes.
If 2: Nothing.
7) Download stock Ainol firmware
8) Try to update tablet via PhoenixSuit (PhoenixSuit will say that i cant connect to tablet, but ask you to do step 1-6)
9) Do steps 1-6, and it should work this time. (well, did for me)
Hope this helps, else i got nothing
//DNN
DNN said:
Had same problem, this worked for me:
You Need:
PhoenixSuit
1) Install PhoenixSuit
2) Disconnect USB
3) Shut down tablet (Hold power for 10 sec)
4) Press and hold Home-button
5) Connecting USB (keep holding down Home button)
6) Press Power button 10-15 timer (While still holding down Home)
Now 1 of 2 thing happen
If 1: PhoenixSuit pops up and askes, want to reset? - Press yes.
If 2: Nothing.
7) Download stock Ainol firmware
8) Try to update tablet via PhoenixSuit (PhoenixSuit will say that i cant connect to tablet, but ask you to do step 1-6)
9) Do steps 1-6, and it should work this time. (well, did for me)
Hope this helps, else i got nothing
//DNN
Click to expand...
Click to collapse
Relax guys. I need a bit of advice from you experts around. Onda unfortunately isn't available in my country and they say it's not being imported anymore due to problems.
So this is where I end up.
I need help choosing Ainol Novo 9 Spark or Ainol Novo 10 Eternal (known as Captain with 2GB ram and 1200x800 display)
I like the Novo 9 Spark but I read it has wifi problems ( which im not sure is hardware or software) and low speaker volume and it's retina display eats a lot of battery, doesn't support all apps and isn't good for 3D gaming.
Where as Eternal (Captain) has no WiFi problems until now (supports 150mbps), a better battery life (11000 Mah) and as its 1200x800 display it is much faster and has a decent volume. But it has a cheap poor performance CPU ATM 7029 and poor GPU GC 1000. As its new it lacks custom roms and stock repacks too ..
Which one should I go for?
I'll be buying either one this week.
Sent from my GT-I9105
Sent from my GT-I9105
To buy or not to buy
Properly the wrong post for this, but short:
- Do you like to "play around" with your tablet (setting up, installing new firmware, clocking ...)
- Expect to surf internet, read stuff and watch movies alot? (where the Retina display realy comes to life)
My experience is, that stock Ainol 9 suckes; terrible software/firmware.
An update to "Rom by x-calibur sdk 3.2 Yandex 0718" transformed my Novo 9 to not only a usable tablet, but acually a pretty good one.
Games it plays, see: http://forum.xda-developers.com/showthread.php?t=2175446 - All games i have tried works.
Hardware is fine, not the best, not the worst - (but then again, cant expect top-end hardware in a cheap-end tablets); all in all i find it more than adequate.
Especialy the Retina display realy does af difference, crisp clear, but comes at a cost, more work fore the CPU = shorter battery time and less speed - I find it worth it, still get 7-8 hours gaming at max brightness.
Worst Things:
- Wifi antenna is not the best, with at desent router/accespoint you get ok signal (40-60 %), but if you have a big house and low wifi signal in some parts of your house, this might not be the tablet for you. - Its a Hardware problem, so no easy fix, its possible to replace the antenna, but its not a big enough problem fore me to start disasembeling my tablet.
- Play store wont recognize tablet properly - Basicly i cant download anything i have to pay fore, amazon app store works, but just not the same - I get by with downloading apk and donating.
I have no experience with the Novo 10.
//DNN
Thank you, have to learn knowledge.
Same problem
Sorry for my english. I got a Ainol Spark 9 updated to 4.2.2 with TWRP recovery. It turns off suddenly and when I try to turn on appears boot loop. I tried to update via PhoenixSuit pressing home button, conecting USB cable to PC and pressing 10 times nothing happens, Phoenix does not recognize the tablet.
Any suggestion? there is any way to hard reset the tablet pressing buttons?
Same problem with recognize the tablet
Mobeca said:
Sorry for my english. I got a Ainol Spark 9 updated to 4.2.2 with TWRP recovery. It turns off suddenly and when I try to turn on appears boot loop. I tried to update via PhoenixSuit pressing home button, conecting USB cable to PC and pressing 10 times nothing happens, Phoenix does not recognize the tablet.
Any suggestion? there is any way to hard reset the tablet pressing buttons?
Click to expand...
Click to collapse
Hi, I have the same problem. Can you help me please?
Thanks.
fiala said:
Hi, I have the same problem. Can you help me please?
Thanks.
Click to expand...
Click to collapse
DNN said:
Properly the wrong post for this, but short:
- Do you like to "play around" with your tablet (setting up, installing new firmware, clocking ...)
- Expect to surf internet, read stuff and watch movies alot? (where the Retina display realy comes to life)
My experience is, that stock Ainol 9 suckes; terrible software/firmware.
An update to "Rom by x-calibur sdk 3.2 Yandex 0718" transformed my Novo 9 to not only a usable tablet, but acually a pretty good one.
Games it plays, see: http://forum.xda-developers.com/showthread.php?t=2175446 - All games i have tried works.
Hardware is fine, not the best, not the worst - (but then again, cant expect top-end hardware in a cheap-end tablets); all in all i find it more than adequate.
Especialy the Retina display realy does af difference, crisp clear, but comes at a cost, more work fore the CPU = shorter battery time and less speed - I find it worth it, still get 7-8 hours gaming at max brightness.
Worst Things:
- Wifi antenna is not the best, with at desent router/accespoint you get ok signal (40-60 %), but if you have a big house and low wifi signal in some parts of your house, this might not be the tablet for you. - Its a Hardware problem, so no easy fix, its possible to replace the antenna, but its not a big enough problem fore me to start disasembeling my tablet.
- Play store wont recognize tablet properly - Basicly i cant download anything i have to pay fore, amazon app store works, but just not the same - I get by with downloading apk and donating.
I have no experience with the Novo 10.
//DNN
Click to expand...
Click to collapse
Mobeca said:
Sorry for my english. I got a Ainol Spark 9 updated to 4.2.2 with TWRP recovery. It turns off suddenly and when I try to turn on appears boot loop. I tried to update via PhoenixSuit pressing home button, conecting USB cable to PC and pressing 10 times nothing happens, Phoenix does not recognize the tablet.
Any suggestion? there is any way to hard reset the tablet pressing buttons?
Click to expand...
Click to collapse
Try reinstalling the rom and then, before rebooting, wipe the dalvik again. Others were having the same problem (with the Onda V972 - the same tablet) and this seemed to sort them out.
my ainol is not starting
i was doing a firmware update on my ainol novo spark using pheonix suit and usb was disturbed during upgrade and since then my ainol is not working.not even showing any display not even that of charging.can anybody help please?
ainol novo spark stuck on cyanogenmod
hello im having problem with ainol novo spark white i know this is a old subject but need help if anybody out there can help
i tried to update my tablet with 10.1 cyanogenmod and it worked but keep saying google play has stopped so i tried to download it and it didnt go in same thing long story short i rebooted several times and it got stuck on cyanogenmod logo i tried phonex suite package and it won reconized the device i tried every method im stuck please help
Well, my Spark died as you know so I contacted to seller online who sold me the device about my problem. Then they ask me for some info and pics showing the issue I sent back the tablet to warranty replacement and a couple months later they sent me a new tablet. I just spend the cost of shipping to China, that's all.
hard reset
When the tablet is completely off
1. Hold the Volume down button
2. Press and hold the power button. You will see a battery appear and a hear a beep shortly after. Release after about 15 seconds.
3. The device will now boot into boot loader with ability to hard reset.
dead bricked spark 9 tablet
mickrick said:
Try reinstalling the rom and then, before rebooting, wipe the dalvik again. Others were having the same problem (with the Onda V972 - the same tablet) and this seemed to sort them out.
Click to expand...
Click to collapse
hi All,
my SPARK 9, AINOL NOVO tablet started freezing repeatedly, and kept displaying that apps downloaded from google playstore were no longer compatible and stopped working. soft factory resets did not solve the problem as the apps kept misbehaving as before. i had to force close it after another episode of freezing by pressing down the power button. after this, the tablet did not come on again.
the tablet now shows the following symptoms:
1. not recognized by PC or phoenix software
2. does not display battery charging icon when connected to charger but tablet becomes warm after some time.
3. i have read that in order for phoenix software to recognize the tablet, one must use a screwdriver to bridge certain pins, but before proceeding , the pin configuration of the chipset in the tablet should be identified -as my tablet is also AINOL, but the spark 9-so i am posting the chipset pictures, pls if this procedure will work with the spark 9 kindly assist. i have tried to upload the pictures of the motherboard showing the two NAND FLASH chips on board, but the link does not display paths on my laptop but rather a URL.
there are 2 flash NAND's on the motherboard with these serial numbers"
SK hynix
H27UCG8T2BTR
BC 309AA
M12KG9320H & M12KH8120H
i have downloaded this rom: Novo9-Spark-LX-20130422v1-1, i hope to flash it to the tablet once phoenix can recognize the tablet.
thanks.
thanks.
Hi Everyone!
This is my first post on the board, so at begin I wanna say that topics here are very helpful. Always when I've had a problem I could to find answer somewhere here. However, today I can't.
Some time ago my friend have bought a tablet Moonse N730 on CPU Allwinner A10.Sorry, I can't give you a link. Everything was ok, to the first battery discharge. After charging, she wanted to switch on the tablet. Screen lights up, but after few seconds device get frozen. My first thought was - factory reset will help. Unfortunately, there appeared the first problem. Chinese language in recovery mode. Somehow, someway I've done the reset after several attempts. But it doesn't fix problem. I mean device worked ok to the next discharged and then same story again.
My conclusion is - it need a new OS.
I've been tried few Android versions already, but always something wasn't good. Ones camera didn't work. Second time - touch screen. Right now when you trying turn camera on device is rebooting.
I have found on forum few topics from the past (2 years ago) but there was nothing useful.
If anyone can help me I'll appreciate it. Thanks.
P.S. Sorry about my poor English
A friendly guy (http://forum.xda-developers.com/member.php?u=2047451) here reccomended I post this here, so: here's my problem.
Hello, it's me again, Omnitrixer. I recently (2-3 months ago) bought a new Android device, myTab MT72A. Everything worked fine, I loved the UI, the free space, graphics, everything! A week ago, I turned it off while I was away. When I got back home, I tried to turn it on but: it wouldn't power on, no matter what. Yes, I tried charging it, pressing every button etc. etc. but nope. Just wouldn't turn on. It wasn't even on the bootloop screen. Should I send it to the manufacturer and hopefully get a new one? Or just buy another one? Reccomendations and advice welcome. Thank you.