Hello,
I have been trying for the last 2 days to install the PurePerformance Mod without success.
Found here :
http://forum.xda-developers.com/showthread.php?t=2360670
I have a Asus Zenfone 5 T00J WW with the Philz 6.55 touch recovery CWM.
The first problem when flashing was a status 255 error which I think I solved by changing the recovery-update file by the one in my ROM.
Then I got the following issue:
set_perm: some changes failed E: Error in /sdcard/PurePerformances.zip (Status 7)
I have also found this, but I dont really understand and I'm not sure if it works.
http://www.grupoandroid.com/topic/6...r-status-255-y-status-6-o-7-actualizado-6313/
Can anyone help me please?
Thanks
Luxumbra
Related
Hi guys,
I just rooted my SG2 and I'm getting this error:
E:Error in /sdcard/Hyperdroid_Androidmeda_v4.0.0_signed.zip
(Status 1)
Installation aborted.
I've tried flashing other ROMs other than Hyperdroid and I still get the same error.
Anyone have the same problem and a possible solution?
Which kernel did you flash?
I have been trying to make a Custom Rom of ICS (evervole&CM9)
I keep getting a status 6 error i looked it up an it says the updater-script is wrong or something so i just got the original CM9 updater-script and it still gives me the same messege
if some one can take a look at the zip and tell me what i am doing wrong it will be greatly apreciated
mediafire{dot}com/?e3t2wc5spyy366v
this is the rom i havent really added anything because i want to make sure i can flash it the i was/am going to add stuff
-----------------------------------------------------
okay well i fixed the Status 6 but not its saying
--Installing: /sdcard/ICS_ALPHA_VER.001.zip
Finding update package....
installing update package...
assert failed: write_raw_image("/tmp/radio.img", "radio")
E:Error in /sdcard/ICS_ALPHA_VER.001.zip
(status 7)
Installation aborted
mediafire.com/?4fga4deck1ad1oj <--- updated ROM
how did you fix problem (status 6)
Please can you tell me on how you fix the "(status 6)" problem? thank you
mysgyoung.phil said:
Please can you tell me on how you fix the "(status 6)" problem? thank you
Click to expand...
Click to collapse
pls specify how u solve status 6 error ?
Hello,
I have the Problem that i can't install any custom rom on my GTab 10.1 P7500.
I'm on stock rom 4.0.4 right now and i tried everything. I want to flash the CM10-nightlies. I tried it with TWRP and CWM.
The error first was "assert failed getprop". I have deleted the first line in updater-script and the error was gone but after that I got the "symlink: some symlinks failed error (status 7) error"
I know that there are some other threads about this issue but with no solution.
Does anyone know what to do here?
Thanks
vanesco said:
Hello,
The error first was "assert failed getprop". I have deleted the first line in updater-script and the error was gone but after that I got the "symlink: some symlinks failed error (status 7) error"
Click to expand...
Click to collapse
There are two reasons you'll get the "assert failed". Either the ROM you're trying to install is not meant for your tab (it's for a tab 2 or something else) or you're running an old version of Clockwork Mod recovery. At some point, the GT-P7510 getprop string changed to "p4wifi" but older CWM wasn't giving that as the device name.
First, I'd make VERY sure that the ROM you're trying to install is compatible with your device. Editing the script as you did can brick your device. If you're sure it's OK, update CWM.
k1mu said:
There are two reasons you'll get the "assert failed". Either the ROM you're trying to install is not meant for your tab (it's for a tab 2 or something else) or you're running an old version of Clockwork Mod recovery. At some point, the GT-P7510 getprop string changed to "p4wifi" but older CWM wasn't giving that as the device name.
First, I'd make VERY sure that the ROM you're trying to install is compatible with your device. Editing the script as you did can brick your device. If you're sure it's OK, update CWM.
Click to expand...
Click to collapse
Hello,
thanks for the reply.
The ROM I want to install is "cm-10-20121119-NIGHTLY-p4" and it is the right one because the p4 version is for the p7500 GTab 3G.
I have cwm v5.8.3.1. I've downloaded it again and stil getting getprop errors...:crying:
Every custom ROM I try to install I get the same error message...
Does anyone has same issues?
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
vncsalencar said:
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Make sure u are using the latest version of cmw... Most of the status 7 fails have to do with this.
Sent from my GT-I9300 using xda app-developers app
I am using the most updated... and tried with other recoveries but no sign of progress. And I have read some threads with some possible solutions but still stuck... :/
vncsalencar said:
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Try reading the FAQ for philz recovery
Hello,
I am trying to install a rom on my phone but it's not really working out the way I hoped. I got blockworkmod running on my S3 and I tried to install the carbonROM file for my device. This returned the following message after about 20 seconds of installing:
set_metadata_recursive: some changed failed
E: Error in /external_sd/CARBON-KK-NIGHTLY-20141106-1232-i9305.zip
(status 7)
Instalation aborted.
When I tried to install cyanogenmod to the device it didn't do anything, it just imediately returned to the homescreen on clockworkmod.
What can be the problem here and what should I do to be able to use the phone again with any good ROM?
NOTE: I am very new to this stuff, with installing ROMs and rooting my phone.
bump
*coughs*