Looking for a good eq for the s. Any suggestions?
I use PlayerPro and the DSP Pack for PlayerPro which adds a 10 band EQ. It's not free but I love the combination it really brings my music to life. I have to say I do feel the Samsung audio from the Tab S is much louder then my LG GPad 8.3 was that tablet the audio was just too low, full volume just did not come close to being load enough but PlayerPro with the DSP Pack made it nice and loud.
MarkLI88 said:
I use PlayerPro and the DSP Pack for PlayerPro which adds a 10 band EQ. It's not free but I love the combination it really brings my music to life. I have to say I do feel the Samsung audio from the Tab S is much louder then my LG GPad 8.3 was that tablet the audio was just too low, full volume just did not come close to being load enough but PlayerPro with the DSP Pack made it nice and loud.
Click to expand...
Click to collapse
Thanks for the info! Will give it a try.
I use viper4android on all my devices. Best equalizer by far. So much fine control, you can make your music sound exactly how you want it.
Only downside for some people is that it requires root. If you're not rooted/don't want to root, it wont work.
Viper4Android
uhh186 said:
I use viper4android on all my devices. Best equalizer by far. So much fine control, you can make your music sound exactly how you want it.
Only downside for some people is that it requires root. If you're not rooted/don't want to root, it wont work.
Click to expand...
Click to collapse
Yep I'm rooted so I will give it a try. Thanks for your reply.:good:
I there tried to install viper4android but I get the driver failed to instaol error, due to busybox. I've installed busybox but same error. An6one has a suggestion? Thank you
vibecatalin said:
I there tried to install viper4android but I get the driver failed to instaol error, due to busybox. I've installed busybox but same error. An6one has a suggestion? Thank you
Click to expand...
Click to collapse
There's a fix somewhere in the q&a section. Just curious, is your se for android set to permission? It's in the about device section in settings in case you don't know.
When I get home I will see if it's set to permission. Anyway this is the only application that I have problems with it. The other ones that require root ( and busybox of course) are working without any problem.
L. E. SE for Android it says : Enforcing. It is ok?
vibecatalin said:
When I get home I will see if it's set to permission. Anyway this is the only application that I have problems with it. The other ones that require root ( and busybox of course) are working without any problem.
L. E. SE for Android it says : Enforcing. It is ok?
Click to expand...
Click to collapse
Download SELinux Mode Changer from play store and set to permissive. May not work with Knox though. See if that fixes it.
Ok so I've downloaded the SeLinux Mode Changer, it grants superuser permission but when I set it to permissive, if I quit and enter the app is back on enforcing, also if I set it to permissive and press the home button and go to about device still Enforcing. I've disabled Knox, and freezed all the apps and services with Titanium Backup.
Any ideas?
vibecatalin said:
Ok so I've downloaded the SeLinux Mode Changer, it grants superuser permission but when I set it to permissive, if I quit and enter the app is back on enforcing, also if I set it to permissive and press the home button and go to about device still Enforcing. I've disabled Knox, and freezed all the apps and services with Titanium Backup.
Any ideas?
Click to expand...
Click to collapse
Your gonna need a custom kernel for permissive. What rom and device are you on?
I have an T800 and I m running stock Rom rooted with chainfire's root method
vibecatalin said:
I have an T800 and I m running stock Rom rooted with chainfire's root method
Click to expand...
Click to collapse
Oh.. Yeah we have a kernel thats set to permissive. Its skyhigh kernel. The reason I know that because Iron rom has viper for android included.
DUHAsianSKILLZ said:
Oh.. Yeah we have a kernel thats set to permissive. Its skyhigh kernel. The reason I know that because Iron rom has viper for android included.
Click to expand...
Click to collapse
You da man! Been on my nexus 6 too long and forgot about that.
Ok. So I've installed the SkyHigh kernel, Knox Disabled, Kernel set to permisive STILL the same error .
vibecatalin said:
Ok. So I've installed the SkyHigh kernel, Knox Disabled, Kernel set to permisive STILL the same error .
Click to expand...
Click to collapse
No idea then... Installing a custom rom such as iron rom would work? It worked when I had iron rom on my tab s. Drivers worked fine on iron rom. So it must be a rom realted issue as it works fine on iron rom.
I'm happy with this ROM plus I've found that SkyHigh kernel has some audio options stuff. It is quite good ( the kernel ) so I can live without viper4android . Thanks for all the answers!
Bushcrafter said:
Looking for a good eq for the s. Any suggestions?
Click to expand...
Click to collapse
viper4android seems ok...
Back with the question again, since I've updated to 5.0.2 and the kernel can't be set to permissive, besides ViperFX (wich I can't install on my tab S) what are other alternatives to it?
Thank you!
Related
discontinued
Change Log
discontinued
PROMAX
discontinued
Sweet!!! New kernels are always fun!!
Can you please mention which hotplug is used ?? Also which app can be used to adjust kernel settings other than synapse?
karthi89 said:
Can you please mention which hotplug is used ?? Also which app can be used to adjust kernel settings other than synapse?
Click to expand...
Click to collapse
mpdec hotplug from show-p1984
trickstermod is the best
Is it possible to have USB-OTG patch in the Kernel? Just a thought
Use on Lollipop...
Hi, I have now Stock ROM Android 5.0 (with ROOT, TWRP, unlock...). I tried to use your kernel and phone start up without troubles.
But is recommended as kernel Manager Trickster MOD, but this app I can't run on Lollipop (in SuperSU has ROOT rights).
After that I want at least modify file 05s2w - I want turn on DoubleTap2Wake, but no file browser (Root explorer, ES File manager - both with root rights) can't save this file in this location and I can't change permissions.
Exist now any solution for this?
And in the end I want change color profile, but without aps as. Trickster, I don't know how...
hozjacz said:
Hi, I have now Stock ROM Android 5.0 (with ROOT, TWRP, unlock...). I tried to use your kernel and phone start up without troubles.
But is recommended as kernel Manager Trickster MOD, but this app I can't run on Lollipop (in SuperSU has ROOT rights).
After that I want at least modify file 05s2w - I want turn on DoubleTap2Wake, but no file browser (Root explorer, ES File manager - both with root rights) can't save this file in this location and I can't change permissions.
Exist now any solution for this?
And in the end I want change color profile, but without aps as. Trickster, I don't know how...
Click to expand...
Click to collapse
first you need cf-auto root Here
second trickster mod works fine with Stericson's Busybox
third es file explorer problem may fix Selinux Mod Changer or SuperSU Beta 2.26
Regards
Been using this kernel for some thime and its great. On Lollipop 5.0 getting around 4+ sot. With default settings used. Keep up the good work. Thank you
Shiv Prajapati said:
Is it possible to have USB-OTG patch in the Kernel? Just a thought
Click to expand...
Click to collapse
sorry but no usb-otg support yet
Hi Guys,
My build number is LRX21M. Will this kernel work for me? I noticed it has LRX21T in the file name so wanted to make sure before flashing. BTW, what Lollipop ROM are you all using?
Thanks for any advice you can offer. I've been out of the modding scene for a couple years so I'm a bit unsure of myself now.
dejan1979 said:
Been using this kernel for some thime and its great. On Lollipop 5.0 getting around 4+ sot. With default settings used. Keep up the good work. Thank you
Click to expand...
Click to collapse
I get 4 hours screen on stock Android Lollipop with >20h standby (wifi and 3g on all the time).. really thought about getting this kernel before your post..
bassbox said:
I get 4 hours screen on stock Android Lollipop with >20h standby (wifi and 3g on all the time).. really thought about getting this kernel before your post..
Click to expand...
Click to collapse
I am heavy gps user. Any other kernel i used doesnot give so good sot time as this one. 4+ sot using internal gps, wifi, and about 1,5 hrs talk. It is more than good for my daily use
JaMeVu said:
first you need cf-auto root Here
second trickster mod works fine with Stericson's Busybox
third es file explorer problem may fix Selinux Mod Changer or SuperSU Beta 2.26
Regards
Click to expand...
Click to collapse
THX very much. SELinux Mode Changer helps me... Now DT2W works very well. One more THX!!!
dejan1979 said:
I am heavy gps user. Any other kernel i used doesnot give so good sot time as this one. 4+ sot using internal gps, wifi, and about 1,5 hrs talk. It is more than good for my daily use
Click to expand...
Click to collapse
Okay. Maybe I will give it a try later! Thanks for the response
tlongren said:
Hi Guys,
My build number is LRX21M. Will this kernel work for me? I noticed it has LRX21T in the file name so wanted to make sure before flashing. BTW, what Lollipop ROM are you all using?
Thanks for any advice you can offer. I've been out of the modding scene for a couple years so I'm a bit unsure of myself now.
Click to expand...
Click to collapse
i did not try but it may work with 21m
SuperSU v2.27 ( no more kernel patches ?)
JaMeVu said:
i did not try but it may work with 21m
Click to expand...
Click to collapse
Will give it a shot later tonight and report back. I assume 21t is newer than 21m, or is that not right?
Hells-core
When coming from or to hells-core kernel do I need something to flash before or after your kernel? Or just flash the kernel? Thank you.
I am looking to up the sound quality of the S5 a bit more. With android 4.X versions I always ran with ViperFX but since 5.0 Lollipop I can't get it running properly. Any instruction how I could get this to work?
Or are there any other mods to enhance the headphone signal quality of the S5?
I am using Shure SE215 headphones.
Nice to meet audiophile Well you can get v4a working on lolipop touchwiz: install custom kernel and change selinux mode to permissive mode (you can find an app on market with the same name) then uncheck nuplayer in developer settings( multiple clicks on the rom name in settings) and flash attached file:
Thank you for your answer. I will give this a try.
"Selinux mode changer" app for example can indeed let you switch to permissive. I personally use KT kernel which has natively the permissive mode, and have Viper LP working great coupled with poweramp... Also I preferred to remove Music FX that comes up with CM 12 to avoid any possible conflict with Viper
No luck here. Runnign S5 with XtreStoLite 2.1 and it just keeps asking me to install the driver after I have flashed the package. I can reboot what I want but it just keeps asking.
Tried stock kernel with the mode changer but I have also tried KToonz. No luck. Device is rooted. I followed every step above. Just cant get it to run properly
Cidious said:
No luck here. Runnign S5 with XtreStoLite 2.1 and it just keeps asking me to install the driver after I have flashed the package. I can reboot what I want but it just keeps asking.
Tried stock kernel with the mode changer but I have also tried KToonz. No luck. Device is rooted. I followed every step above. Just cant get it to run properly
Click to expand...
Click to collapse
Try Googymax kernel.I run successfully with this kernel.
Cidious said:
No luck here. Runnign S5 with XtreStoLite 2.1 and it just keeps asking me to install the driver after I have flashed the package. I can reboot what I want but it just keeps asking.
Tried stock kernel with the mode changer but I have also tried KToonz. No luck. Device is rooted. I followed every step above. Just cant get it to run properly
Click to expand...
Click to collapse
Has your device asked you to grant root rights to V4A right after you chose the quality setup (or right after it says it needs to install the driver) ?
I arrived to make work v4a on xtresolite with ktkernel by disabling sound alive and just install the v4a apk (i dont flash the zip) like a normal app if it can help you
where to disable soundalive ??
---------- Post added at 07:40 PM ---------- Previous post was at 07:39 PM ----------
remzawi said:
I arrived to make work v4a on xtresolite with ktkernel by disabling sound alive and just install the v4a apk (i dont flash the zip) like a normal app if it can help you
Click to expand...
Click to collapse
where to disable soundalive ?
chanthoeunpen said:
where to disable soundalive ??
---------- Post added at 07:40 PM ---------- Previous post was at 07:39 PM ----------
where to disable soundalive ?
Click to expand...
Click to collapse
Settings>App settings(i dont know the english name)>all>soundalive
Worked for me too by just installing the app, no need absolutely to flash the zip indeed
anyone getting stuttering/skips during audio playback? can't determine the cause except that when the screen is on or if I'm using the device, I get perfect playback. once the screen goes off, it's anything goes! HELP!
Worked perfectly when disabling Sound Alive like described earlier with just installing APK instead of flashing Zip.
Thanks a lot! I think I've got the best sound I can get on the S5 right now. I am still looking back at the time my wonderful S i9000 rocked my ears.. may it rest in peace!
where to disable soundalive ? in lollipop.
First you will need a permissive kernel,sky high is a great kernel for lollipop and is permissive or http://forum.xda-developers.com/galaxy-tab-s/general/how-to-installing-viper4android-v4a-t3136025 instead of kernel. Go to system/priv-app rename SoundAlive_Tablet_20 to SoundAlive_Tablet_20.bak . Next Go to system/lib/soundfx rename libaudiosa_sec.so to libaudiosa_sec.so.bak, Next system/lib rename libaudiosa.so to libaudiosa.so.bak. install v4a reboot and enjoy v4a on stock samsung music player.
Thanks to @UpInTheAir for his great kernel
Thanks to the creator of v4a and the maintainer @zhuhang
Thanks to @3DSammy for the supersu policy info and thread
Thanks to @basic086 for the great music player he ported in his tw detox v3 rom
You do not need a permissive kernel anymore as you can use a SuperSU policy instead. Using a SuperSU policy is more secure plus is your only viable option if you rooted without tripping knox and use stock which does not allow permissive mode. Look in the general section for a V4A how to. It is targeted at Lollipop but the SuperSU policy flash file link could be used with KitKat.
Sent from my SM-T800 using XDA Premium HD app
@3DSammy I made This thread so people can have v4a on there stock samsung music player since there is no info on doing it. Most samsung device v4a will not work with stock music player with our tab s it will. But thanks for the info I will post I link to the thread. The music player in twdetox from dev @basic086 is the best ive used ithink its ported from the galaxytab A
3DSammy said:
You do not need a permissive kernel anymore as you can use a SuperSU policy instead. Using a SuperSU policy is more secure plus is your only viable option if you rooted without tripping knox and use stock which does not allow permissive mode. Look in the general section for a V4A how to. It is targeted at Lollipop but the SuperSU policy flash file link could be used with KitKat.
Sent from my SM-T800 using XDA Premium HD app
Click to expand...
Click to collapse
My kernel has added SU SELinux policies, so in theory, should allow V4A even if kernel is set enforcing. Never tested this actually working though, as I only use Wolfson Audio which used board level rather than software gains
UpInTheAir said:
My kernel has added SU SELinux policies, so in theory, should allow V4A even if kernel is set enforcing. Never tested this actually working though, as I only use Wolfson Audio which used board level rather than software gains
Click to expand...
Click to collapse
Thanks for the info @UpInTheAir your kernel runs great by the way........will tested and report if this works. Thanks again for your tab s support..
Hi,
exactly what i needed.
cya
This s awesome! Just what I was looking for. Don't forget to disable SoundAlive in the apps settings or you'll get the annoying pop-up stating soundalive has stopped working.
V4A doesn't work on my T705
I'd try lots of way, install & uninstall the driver/app and reboot each time still doesn't work. Any help / tips / advice from Tab S user would be great. Mine is Tab S 8.4 T705 with stock touchwiz android 5.0.2, latest busybox, latest superSU. Pls help me. Thanks a lot.
Delete please
Matt Dixon said:
I'd try lots of way, install & uninstall the driver/app and reboot each time still doesn't work. Any help / tips / advice from Tab S user would be great. Mine is Tab S 8.4 T705 with stock touchwiz android 5.0.2, latest busybox, latest superSU. Pls help me. Thanks a lot.
Click to expand...
Click to collapse
Same happen to me
Need some help too.
Sent from my SM-T705 using XDA-Developers mobile app
The Ultimate Experience!
Your headphones could be much better than you thought!
It makes my QuadBeat 2 headphones soundbetter than $50 Sennheiser ones. And you can use it with those headphones as well! (tested!)
This is a combination of eXtremeBeats audio mod with my own Viper4Android profiles. It is very versatile, and it works with all headphones & ROMs.
The biggest difference is in the bass, you will be amazed, I can promise you that!
What do you need?
A brain.
Root & Recovery.
50MB of system space are required.
A full system backup!
Viper4Android app (you can download it here).
SELinux set to permissive. (via http://forum.xda-developers.com/showthread.php?t=2524485, google for help)
Any headphones.
What do I have to download? Do you have...
Android 6.0 Marshmallow? Do you encounter any compatibility issues (eg. Maxx audio force closing)? Download version 4.1 Muses of eXtremebeats.
Lollipop? Kitkat? LG Stock? AOSP? Anything but android M 6.0? Download version 5.0 Apollo (or higher) of eXtremeBeats.
eXtremebeats download here: http://forum.xda-developers.com/showthread.php?t=2634729
Download latest apk of Viper4Android FX here: http://vipersaudio.com/blog/?page_id=48
Official thread and credits: http://forum.xda-developers.com/showthread.php?t=2191223
My Viper profiles will be in the attachment below!
How do I install this?
After downloading and placing all the files to your internal storage, do this:
If you have Android 5.0/5.1 then go to developer options and make sure you disable the Nu Player and use Awesomeplayer instead.
Install the correct version of eXtremeBeats zip via the recovery.
Extract the ViPER4Android folder from my zip to your internal storage.
Install Viper4Android app (if you don't have it already), open it, and select Super Audio Quality driver, then reboot.
Open Viper4Android - press the menu button - UI Setting - Expert.
How do I use this?
Connect your headphones - open Viper4Android - press the menu button - Load Effect Profile - and load a profile of your choice!
Which profiles should I use?
If you are on LG based ROM (stock LP, KK) then use LG ROM Bass profile.
If you are using AOSP, use AOSP Bass or AOSP Rock profile.
If you want to create a new profile, then use Basic Template as a template - it has an equalizer made for QuadBeat2 headphones.
If you're using different headphones, then try these profiles first, and customize them to your taste. It will work without any problems.
Do not be afraid to experiment with Viper, try all the settings, change them, combine them, create new profiles and most of all, don't forget to press thanks!
Note: I did not create the eXtremeBeats mod, but I felt like I have to share my combination with you, because the music sounds amazing, no matter the ROM (stock/AOSP).
Wow! My headset sounds great! Thanks op well done! :good:
Added to index
[INDEX][LG G2] ROMs, Kernels, Guides and more
Sorry but i am kinda noob. I extracted your zip and found 3 folders DDC, Kernel & Profile (AOSP BASS, AOSP ROCK Basic Template & LG ROM Bass ). And i don't have any idea which folder where to place required your help.
Profiles need to be place in viper/profiles but i dont know abour other files
And one more thing everytime i am opening viper app it is asking to install driver which i have done already multiple times.
rajkatiyar07 said:
Sorry but i am kinda noob. I extracted your zip and found 3 folders DDC, Kernel & Profile (AOSP BASS, AOSP ROCK Basic Template & LG ROM Bass ). And i don't have any idea which folder where to place required your help.
Profiles need to be place in viper/profiles but i dont know abour other files
And one more thing everytime i am opening viper app it is asking to install driver which i have done already multiple times.
Click to expand...
Click to collapse
All 3 folders should be extraced to the ViPER4Android folder in the sdcard folder (meaning the DDC, Kernel and Profile folder is inside ViPER4Android folder).
Did you grant Viper root permissions? Did you reboot after isntalling the driver? Is your SELinux set to permissive? If so, then try to google for help.
danek731 said:
All 3 folders should be extraced to the ViPER4Android folder in the sdcard folder (meaning the DDC, Kernel and Profile folder is inside ViPER4Android folder).
Did you grant Viper root permissions? Did you reboot after isntalling the driver? Is your SELinux set to permissive? If so, then try to google for help.
Click to expand...
Click to collapse
Root Permissions - Yes
Reboot - Yes
SELinux- Yes
No alternative for 4.4.2?
You can use same for that too.
rajkatiyar07 said:
Root Permissions - Yes
Reboot - Yes
SELinux- Yes
Click to expand...
Click to collapse
Well, then try Google, because I have no idea what went wrong. It is a problem with Viper.
bouighil said:
No alternative for 4.4.2?
Click to expand...
Click to collapse
What do you mean no alternative? It does work for 4.4.2, just use the 5.0 version, as mentioned.
danek731 said:
What do you mean no alternative? It does work for 4.4.2, just use the 5.0 version, as mentioned.
Click to expand...
Click to collapse
Sorry i was confused lol
I've tried your tutorial and i just can say WOOOOOOOOOW awamzing bass and sound. Tnx
Tried this mods with kitkat based optimusflex rom at work as it should feels like my ears will blow
sheikhramnuj said:
Tried this mods with kitkat based optimusflex rom at work as it should feels like my ears will blow
Click to expand...
Click to collapse
Try setting the UI settings to Expert in the Viper menu, and lower the bass boost a bit.
Or, if you like it that way, try playing with the settings a bit.
Please try to share it with more people, as I feel it does not get as much views as it deserves.
danek731 said:
Try setting the UI settings to Expert in the Viper menu, and lower the bass boost a bit.
Or, if you like it that way, try playing with the settings a bit.
Please try to share it with more people, as I feel it does not get as much views as it deserves.
Click to expand...
Click to collapse
Thanks for the tips mate. I just reduce some bass effects. I already share your mods to our facebook group and they like it very much of course all credits goes to you Keep it up!
i am enjoying this thing ,,just wow.. where can i find more profiles ? any 1 ?
rajkatiyar07 said:
i am enjoying this thing ,,just wow.. where can i find more profiles ? any 1 ?
Click to expand...
Click to collapse
Just load up basic template profile (with the equalizer only) and try setting things up by yourself! Set the UI settings (in the Viper menu) to Expert, and try changing the Convolvers
danek731 said:
Just load up basic template profile (with the equalizer only) and try setting things up by yourself! Set the UI settings (in the Viper menu) to Expert, and try changing the Convolvers
Click to expand...
Click to collapse
Thanks for replying bud.. I live in India .. It is 5 AM here .. I think i am gonna my office today lol. i am new thats why i was asking for cooked meal. but i think i am on my own in this business :silly: will figure out soon how things work.
Just tried this mod and i'm not sure I did things correctly and just want to make sure of a few things.
1.) I am using a 5.1.1 rom so I installed extremebeats 5.0. Is that correct?
2.) I see that there were 4 apks installed into my system\app folder, but not in a specific app folder like other system apps. Also, those apps don't show up in my apps list. Is this all normal? Am I supposed to have access to those apps for any reason?
Thanks for any help....
flyinjoe13 said:
Just tried this mod and i'm not sure I did things correctly and just want to make sure of a few things.
1.) I am using a 5.1.1 rom so I installed extremebeats 5.0. Is that correct?
2.) I see that there were 4 apks installed into my system\app folder, but not in a specific app folder like other system apps. Also, those apps don't show up in my apps list. Is this all normal? Am I supposed to have access to those apps for any reason?
Thanks for any help....
Click to expand...
Click to collapse
You cant install V4A on 5.1.1 . Perform a full backup if you are going to try. You can flash Extremebeats too but as i said before run a full backup in recovery to secure your device and avoiding bootloops . Before all these check if your SELinux is set to permissive .
---------- Post added at 12:46 PM ---------- Previous post was at 12:42 PM ----------
My goodness i collected lot of irs and now going to mess with them . God help me if i could create some wonder
rajkatiyar07 said:
You cant install V4A on 5.1.1 . Perform a full backup if you are going to try. You can flash Extremebeats too but as i said before run a full backup in recovery to secure your device and avoiding bootloops . Before all these check if your SELinux is set to permissive .
---------- Post added at 12:46 PM ---------- Previous post was at 12:42 PM ----------
My goodness i collected lot of irs and now going to mess with them . God help me if i could create some wonder
Click to expand...
Click to collapse
I believe the problem is somewhere else, because I use BlissPop based on CM 12.1 (Android 5.1.1) and I am using Viper.
So, you can install Viper on Android 5.1.1.
Hi. thanks to @mannyvzla finally i got Viper4Android to work. on Stock Rom, Stock Kernel and Marshmallow!
here are the steps. (you need rooted s5)
1.Install busy box.
2.flash this file via recovery menu https://www.dropbox.com/s/k9cnruw2e1t1d4t/ViPER4Android-supolicy.zip?dl=0
(it will allow viper4android for your stock kernel)
3.after that go to SuperSU Settings and uncheck the entry for namespaces.
4.install viper4android normally (just download the original apk and install it)
5.install the driver, restart phone
6.enjoy your music In BEST QUALITY
Mod works fine!!! Thanks for share it.
A question: How to increase volume in MM stock? Any mod or kernel or app like boeffla? ....
Brilliant, been trying to get it to work for the last week on rooted s5 with stock mm and this sorted it, thank you.
It worked thanks
no problem guys, enjoy!
Will it work in g900h marshmallow and i m not getting entry for name spaces in su setting
S5 900f alexandr mm rom not working
EDIT
Tried again and it works!
I dont know what I did different last time, but it works now! Thanks!
Sent from my SM-G900F using Tapatalk
Thanks a bunch!!
Installed on a Canadian sm-900w8, stock.
I also froze the built in music player, adapt sound and google music to make sure it wouldn't interfere.
I couldn't locate the music effects in either the default player or google music, which is why I disabled them.
Again thanks for this, my device sounds great!
c9rodolfo said:
Mod works fine!!! Thanks for share it.
A question: How to increase volume in MM stock? Any mod or kernel or app like boeffla? ....
Click to expand...
Click to collapse
If you go into Viper and change the Ui setting to moderate it will open more options being Master Gate which is under Extra Loud. Both of these options can give a boost.
babalou62 said:
If you go into Viper and change the Ui setting to moderate it will open more options being Master Gate which is under Extra Loud. Both of these options can give a boost.
Click to expand...
Click to collapse
Thanks for your answer... I modified some system files and now listen better and stronger
i am glad that it worked for all of you! enjoy the music
Just a quick question, does it work on the stock Music Player of Marshmallow?
does it work on g906s?
Thanks a lot! Worked perfectly on my Galaxy S5 with marshmallow.
I tried this. The drivers were installed normally. But whatever options I enable in the V4A, it doesn't have any effect on the sound. I'll try it again.
GhostKiller19 said:
I tried this. The drivers were installed normally. But whatever options I enable in the V4A, it doesn't have any effect on the sound. I'll try it again.
Click to expand...
Click to collapse
Make sure to also try selecting "Compatible" mode in "Settings - FX Compatible Mode". For me if it's on "Normal" there is no effect but when I change it to "Compatible" it works fine.
Works perfekt for me ????chanks
Gesendet von meinem A1-810 mit Tapatalk
Will this also work on other devices wit MM and stock kernel like SM A520F?
Worked great for me. I first had to switch from MagiskSU back to SuperSU, which was tricky. I also needed to use compatible mode. Using it with Spotify.
Dropbox file was deleted
Sent from my Galaxy S5 using XDA Labs