Hi. thanks to @mannyvzla finally i got Viper4Android to work. on Stock Rom, Stock Kernel and Marshmallow!
here are the steps. (you need rooted s5)
1.Install busy box.
2.flash this file via recovery menu https://www.dropbox.com/s/k9cnruw2e1t1d4t/ViPER4Android-supolicy.zip?dl=0
(it will allow viper4android for your stock kernel)
3.after that go to SuperSU Settings and uncheck the entry for namespaces.
4.install viper4android normally (just download the original apk and install it)
5.install the driver, restart phone
6.enjoy your music In BEST QUALITY
Mod works fine!!! Thanks for share it.
A question: How to increase volume in MM stock? Any mod or kernel or app like boeffla? ....
Brilliant, been trying to get it to work for the last week on rooted s5 with stock mm and this sorted it, thank you.
It worked thanks
no problem guys, enjoy!
Will it work in g900h marshmallow and i m not getting entry for name spaces in su setting
S5 900f alexandr mm rom not working
EDIT
Tried again and it works!
I dont know what I did different last time, but it works now! Thanks!
Sent from my SM-G900F using Tapatalk
Thanks a bunch!!
Installed on a Canadian sm-900w8, stock.
I also froze the built in music player, adapt sound and google music to make sure it wouldn't interfere.
I couldn't locate the music effects in either the default player or google music, which is why I disabled them.
Again thanks for this, my device sounds great!
c9rodolfo said:
Mod works fine!!! Thanks for share it.
A question: How to increase volume in MM stock? Any mod or kernel or app like boeffla? ....
Click to expand...
Click to collapse
If you go into Viper and change the Ui setting to moderate it will open more options being Master Gate which is under Extra Loud. Both of these options can give a boost.
babalou62 said:
If you go into Viper and change the Ui setting to moderate it will open more options being Master Gate which is under Extra Loud. Both of these options can give a boost.
Click to expand...
Click to collapse
Thanks for your answer... I modified some system files and now listen better and stronger
i am glad that it worked for all of you! enjoy the music
Just a quick question, does it work on the stock Music Player of Marshmallow?
does it work on g906s?
Thanks a lot! Worked perfectly on my Galaxy S5 with marshmallow.
I tried this. The drivers were installed normally. But whatever options I enable in the V4A, it doesn't have any effect on the sound. I'll try it again.
GhostKiller19 said:
I tried this. The drivers were installed normally. But whatever options I enable in the V4A, it doesn't have any effect on the sound. I'll try it again.
Click to expand...
Click to collapse
Make sure to also try selecting "Compatible" mode in "Settings - FX Compatible Mode". For me if it's on "Normal" there is no effect but when I change it to "Compatible" it works fine.
Works perfekt for me ????chanks
Gesendet von meinem A1-810 mit Tapatalk
Will this also work on other devices wit MM and stock kernel like SM A520F?
Worked great for me. I first had to switch from MagiskSU back to SuperSU, which was tricky. I also needed to use compatible mode. Using it with Spotify.
Dropbox file was deleted
Sent from my Galaxy S5 using XDA Labs
Related
This is not official.
this is posted just for a link and a description.
This is a link to 2 audio mods by team ViperAudio.
This mod/app is really powerful and allows you to truly make any music using any ANY earphones sound AMAZING!
Can give heavy bass , crystal clear clarity and many more effects at the same time and also has a technology so that it does not hurt your ears!
and is very easy to install too. just install the apk.
there's the link to the official post http://forum.xda-developers.com/showthread.php?t=2191223
Much better than Dsp manager or any audio mod/app u have ever tried.
all viper related stuff is owned and created by team Viper. and i take no credits for it
all credits go to teamViper.
I am only a fan who wanted to share this with the razr community
And also let me know if any of u have started using it.
also check out the recommended settings by the original poster. they work relly well.
I use this...it really blows our ears....try it...
Ndietya
demonshouter said:
I use this...it really blows our ears....try it...
Ndietya
Click to expand...
Click to collapse
I hope u are using the convolver too. Adds a completely new dimension to it
Sent from my XT910 using Tapatalk 2
which cpu we must choose ?
oguzpasa said:
which cpu we must choose ?
Click to expand...
Click to collapse
For our razrs it should A9 with NEON
:thumbup:
Sent from my XT910 using Tapatalk 2
and for xhifi?With VFP or CortexAx with NEON?
oguzpasa said:
and for xhifi?With VFP or CortexAx with NEON?
Click to expand...
Click to collapse
CortexAx with NEON
Sent from my XT910 using Tapatalk 2
Gautam Padirooted said:
CortexAx with NEON
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
thx
I am looking to try some of these in this post but the only thing is that I have heard using some of these ROMs while using these audio programs kind of causes the sound to not work. Any experience with this problem?
mvp4him3 said:
I am looking to try some of these in this post but the only thing is that I have heard using some of these ROMs while using these audio programs kind of causes the sound to not work. Any experience with this problem?
Click to expand...
Click to collapse
yes that happens with every 3rd party sound mod u install on SOME roms.
i have had this problem only on AOKP based roms.
there is no problem with CM or Liquid Smooth or any of these stock based roms.
if u have any problem u can report it below. i'll guide u if u have any
:good:
Does anyone run this with the stock-jb ?
Under Settings->Sound->Audioeffects i dont have the option to activate Viper...
BrainChecker said:
Does anyone run this with the stock-jb ?
Under Settings->Sound->Audioeffects i dont have the option to activate Viper...
Click to expand...
Click to collapse
Yeah that's not where u activate it from. Preferably freeze the stock audio effects app by using root titanium backup. If not just switch off the stock audio effects. Then go into the viper fx/xhifi app and see driver status. If it says NO then enable the drivers after which u will have to reboot. Do the same for both the apps
After that u may see viper in the sound settings panel too
Sent from my XT910 using Tapatalk 2
Gautam Padirooted said:
This is not official.
this is posted just for a link and a description.
This is a link to 2 audio mods by team ViperAudio.
This mod/app is really powerful and allows you to truly make any music using any ANY earphones sound AMAZING!
Can give heavy bass , crystal clear clarity and many more effects at the same time and also has a technology so that it does not hurt your ears!
and is very easy to install too. just install the apk.
there's the link to the official post http://forum.xda-developers.com/showthread.php?t=2191223
Much better than Dsp manager or any audio mod/app u have ever tried.
all viper related stuff is owned and created by team Viper. and i take no credits for it
all credits go to teamViper.
I am only a fan who wanted to share this with the razr community
Click to expand...
Click to collapse
Post reading the entire stuff, am dazzled with the installation process, therefore, request you to kindly help me with the step by step INSTALLATION PROCESS...as i sincerely want to experience the audio effects of this software.
Gautam Padirooted said:
yes that happens with every 3rd party sound mod u install on SOME roms.
i have had this problem only on AOKP based roms.
there is no problem with CM or Liquid Smooth or any of these stock based roms.
if u have any problem u can report it below. i'll guide u if u have any
:good:
Click to expand...
Click to collapse
Alright I will install and see what happens.
solidshree said:
Post reading the entire stuff, am dazzled with the installation process, therefore, request you to kindly help me with the step by step INSTALLATION PROCESS...as i sincerely want to experience the audio effects of this software.
Click to expand...
Click to collapse
OK
1) go to the original link and download the apks for viperfx and viper xhifi.
2) use root browser lite and and go to system-> app directory and delete any other audio mod eg. Dsp manager or the stock audio effects. (Optional step)
3) if u were not able to do the above just switch off any audio effects profile
4) go to your downloads folder and install the viper fx app first normally. Open that app and click on install /update driver (choose cortex a9 with NEON)
After installing it will ask to reboot. Do not reboot right now
5) then go the viper xhifi app and install (choose cortexax with NEON) and update driver. It will ask to reboot. Now reboot.
The basics are done.
If u want really high quality profiles for playing with cheap earphones go to the original link and download the convolver samples. Transfer then to the phone and place all of them in the SD card/viper4 android/kernel folder.
If u still did not understand pm me with all the details eg. Your ROM and your audio mod, and where exactly u do not understand
Sent from my XT910 using Tapatalk 2
Gautam Padirooted said:
OK
1) go to the original link and download the apks for viperfx and viper xhifi.
2) use root browser lite and and go to system-> app directory and delete any other audio mod eg. Dsp manager or the stock audio effects. (Optional step)
3) if u were not able to do the above just switch off any audio effects profile
4) go to your downloads folder and install the viper fx app first normally. Open that app and click on install /update driver (choose cortex a9 with NEON)
After installing it will ask to reboot. Do not reboot right now
5) then go the viper xhifi app and install (choose cortexax with NEON) and update driver. It will ask to reboot. Now reboot.
The basics are done.
If u want really high quality profiles for playing with cheap earphones go to the original link and download the convolver samples. Transfer then to the phone and place all of them in the SD card/viper4 android/kernel folder.
If u still did not understand pm me with all the details eg. Your ROM and your audio mod, and where exactly u do not understand
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
i follow the guide but neither the option is being showned in sound settin menu nor any effects applied ...i m on jellybean stock rom rooted......i enabled both software still nothing...i tried changing from normal mode to compatible mode ....safe mode to normal mode so on..but still no changes i even deleted audio effects from system menu...but still not working ...pls help..
GaganPla said:
i follow the guide but neither the option is being showned in sound settin menu nor any effects applied ...i m on jellybean stock rom rooted......i enabled both software still nothing...i tried changing from normal mode to compatible mode ....safe mode to normal mode so on..but still no changes i even deleted audio effects from system menu...but still not working ...pls help..
Click to expand...
Click to collapse
could u try rebooting once again? if there is no change i can confirm that it is not running on stock roms. but it is running on my stock based rom though try on normal mode only. no need to switch to compatible mode and all
And are u using any music player with its own equalizer? if yes it is bound to not work
try with google play music
Gautam Padirooted said:
could u try rebooting once again? if there is no change i can confirm that it is not running on stock roms. but it is running on my stock based rom though try on normal mode only. no need to switch to compatible mode and all
And are u using any music player with its own equalizer? if yes it is bound to not work
try with google play music
Click to expand...
Click to collapse
thnx 4 quick reply mate i restarted many many times after every settings changed .k i will try in google music but the problem is google play music doesnt show all songs on sd card for some reason i tried searching solutions on so many sites but none seems to be working so i m currently using poweramp ...i will try google music n post results if it works
IT WORKS BUT NOT WITH EXTERNAL MUSIC PLaYER.....can u help me how to play in poweramp since i has hat above issue ??
GaganPla said:
thnx 4 quick reply mate i restarted many many times after every settings changed .k i will try in google music but the problem is google play music doesnt show all songs on sd card for some reason i tried searching solutions on so many sites but none seems to be working so i m currently using poweramp ...i will try google music n post results if it works
IT WORKS BUT NOT WITH EXTERNAL MUSIC PLaYER.....can u help me how to play in poweramp since i has hat above issue ??
Click to expand...
Click to collapse
This mod will work only when there is no other equalizer installed. It will definitely not work with poweremp. I have all my music on the ext SD card and play music works flawlessly. Uninstall power amp and try. Tell me if u still have problems.
Sent from my XT910 using Tapatalk 2
Hello XDA here i will share V4A fix for Ivan Android L
Requirements--
Rooted
Xiaomi MI3W of course...
Must be in Ivan Android L
Compatible music player like Google Play Music :good:
Procedure---
1.Download the files below
2.Then flash it using cwm recovery....
3.Go to settings-development-UNTICK Use NuPlayer
4.Open V4A then install/update driver
5.Reboot....
Experienced Bugs
1.Seems convolver not working 'but you can try'
ADev_28 said:
Hello XDA here i will share V4A fix for Ivan Android L
Requirements--
Rooted
Xiaomi MI3W of course...
Must be in Ivan Android L
Compatible music player like Google Play Music :good:
Procedure---
1.Download the files below
2.Then flash it using cwm recovery....
3.Go to settings-development-UNTICK Use NuPlayer
4.Open V4A then install/update driver
5.Reboot....
Experienced Bugs
1.Seems convolver not working 'but you can try'
Click to expand...
Click to collapse
I am not seeing V4A app icon anywhere after flashing the zip. Device also has become a lot sluggish since I flashed this zip. Lemme knwo uninstall process if it exists or I'll need to reflash the lollipop ivan ROM.
mandarpalshikar said:
I am not seeing V4A app icon anywhere after flashing the zip. Device also has become a lot sluggish since I flashed this zip. Lemme knwo uninstall process if it exists or I'll need to reflash the lollipop ivan ROM.
Click to expand...
Click to collapse
just remove the app from here using aroma file manager....... system/app/ViPER4Android_FX_A4.x/ViPER4Android_FX_A4.x.apk
just delete the folder.....did you use stock launcher try to use google now launcher with material design
ADev_28 said:
just remove the app from here using aroma file manager....... system/app/ViPER4Android_FX_A4.x/ViPER4Android_FX_A4.x.apk
just delete the folder.....did you use stock launcher try to use google now launcher with material design
Click to expand...
Click to collapse
Removed viper folder. ROM working perfect now.
Was using Google now launcher only. Would really like to try Viper mod though. Any tips ?
I dont see the icon app either.. Any tips on how we can successfully install it?
Viper in Lollipop worked!
It worked for me perfectly on Xiaomi MI3 running AOSP 5.0.
But I first unchecked the "Use NuPlayer" in development settings before installing the zip from CWM recovery.
Viper
mjmaxint said:
I dont see the icon app either.. Any tips on how we can successfully install it?
Click to expand...
Click to collapse
Works for me, but you have to delete some unused apps like gmail, email first. There is no space in /system (at least on my phone)
not able to save the edited build.prop
After editing the built.prop I am not able to save it. It says no space left cannot save.
Quality
How was the sound quality?
Looking for a good eq for the s. Any suggestions?
I use PlayerPro and the DSP Pack for PlayerPro which adds a 10 band EQ. It's not free but I love the combination it really brings my music to life. I have to say I do feel the Samsung audio from the Tab S is much louder then my LG GPad 8.3 was that tablet the audio was just too low, full volume just did not come close to being load enough but PlayerPro with the DSP Pack made it nice and loud.
MarkLI88 said:
I use PlayerPro and the DSP Pack for PlayerPro which adds a 10 band EQ. It's not free but I love the combination it really brings my music to life. I have to say I do feel the Samsung audio from the Tab S is much louder then my LG GPad 8.3 was that tablet the audio was just too low, full volume just did not come close to being load enough but PlayerPro with the DSP Pack made it nice and loud.
Click to expand...
Click to collapse
Thanks for the info! Will give it a try.
I use viper4android on all my devices. Best equalizer by far. So much fine control, you can make your music sound exactly how you want it.
Only downside for some people is that it requires root. If you're not rooted/don't want to root, it wont work.
Viper4Android
uhh186 said:
I use viper4android on all my devices. Best equalizer by far. So much fine control, you can make your music sound exactly how you want it.
Only downside for some people is that it requires root. If you're not rooted/don't want to root, it wont work.
Click to expand...
Click to collapse
Yep I'm rooted so I will give it a try. Thanks for your reply.:good:
I there tried to install viper4android but I get the driver failed to instaol error, due to busybox. I've installed busybox but same error. An6one has a suggestion? Thank you
vibecatalin said:
I there tried to install viper4android but I get the driver failed to instaol error, due to busybox. I've installed busybox but same error. An6one has a suggestion? Thank you
Click to expand...
Click to collapse
There's a fix somewhere in the q&a section. Just curious, is your se for android set to permission? It's in the about device section in settings in case you don't know.
When I get home I will see if it's set to permission. Anyway this is the only application that I have problems with it. The other ones that require root ( and busybox of course) are working without any problem.
L. E. SE for Android it says : Enforcing. It is ok?
vibecatalin said:
When I get home I will see if it's set to permission. Anyway this is the only application that I have problems with it. The other ones that require root ( and busybox of course) are working without any problem.
L. E. SE for Android it says : Enforcing. It is ok?
Click to expand...
Click to collapse
Download SELinux Mode Changer from play store and set to permissive. May not work with Knox though. See if that fixes it.
Ok so I've downloaded the SeLinux Mode Changer, it grants superuser permission but when I set it to permissive, if I quit and enter the app is back on enforcing, also if I set it to permissive and press the home button and go to about device still Enforcing. I've disabled Knox, and freezed all the apps and services with Titanium Backup.
Any ideas?
vibecatalin said:
Ok so I've downloaded the SeLinux Mode Changer, it grants superuser permission but when I set it to permissive, if I quit and enter the app is back on enforcing, also if I set it to permissive and press the home button and go to about device still Enforcing. I've disabled Knox, and freezed all the apps and services with Titanium Backup.
Any ideas?
Click to expand...
Click to collapse
Your gonna need a custom kernel for permissive. What rom and device are you on?
I have an T800 and I m running stock Rom rooted with chainfire's root method
vibecatalin said:
I have an T800 and I m running stock Rom rooted with chainfire's root method
Click to expand...
Click to collapse
Oh.. Yeah we have a kernel thats set to permissive. Its skyhigh kernel. The reason I know that because Iron rom has viper for android included.
DUHAsianSKILLZ said:
Oh.. Yeah we have a kernel thats set to permissive. Its skyhigh kernel. The reason I know that because Iron rom has viper for android included.
Click to expand...
Click to collapse
You da man! Been on my nexus 6 too long and forgot about that.
Ok. So I've installed the SkyHigh kernel, Knox Disabled, Kernel set to permisive STILL the same error .
vibecatalin said:
Ok. So I've installed the SkyHigh kernel, Knox Disabled, Kernel set to permisive STILL the same error .
Click to expand...
Click to collapse
No idea then... Installing a custom rom such as iron rom would work? It worked when I had iron rom on my tab s. Drivers worked fine on iron rom. So it must be a rom realted issue as it works fine on iron rom.
I'm happy with this ROM plus I've found that SkyHigh kernel has some audio options stuff. It is quite good ( the kernel ) so I can live without viper4android . Thanks for all the answers!
Bushcrafter said:
Looking for a good eq for the s. Any suggestions?
Click to expand...
Click to collapse
viper4android seems ok...
Back with the question again, since I've updated to 5.0.2 and the kernel can't be set to permissive, besides ViperFX (wich I can't install on my tab S) what are other alternatives to it?
Thank you!
Hey everyone, this guide's mostly for Samsung J7 Users running on 5.1.1: (Skip steps if you've done them )
*BusyBox app needed to run Viper4Android:
*Download the Custom Kernel V2 from this thread and flash with TWRP, wipe cache/dalvik, reboot:
http://forum.xda-developers.com/android/development/kernel-custom-kernel-v1-0-samsung-t3246209
*Download this mod from the thread and flash, wipe cache/dalvik and reboot:
http://forum.xda-developers.com/showthread.php?t=2634729
*Download Viper4Android FX 2.3.4.0 from this thread and install apk app:
http://forum.xda-developers.com/showthread.php?t=2191223
After all is done open up Viper, if driver installation pops up choose 1st option (worked for me, no battery drain), reboot. You're good to go. Also for best results I suggest converting Viper4Android into a system app using Titanium or Link2SD etc app. That way audio doesn't go back to default all the time.
Tested and working for: MX Player, Play Music, VLC, hardware speakers etc
Might not work for all apps including some
games.
All Credits go to the respective owners. Have fun :laugh:.
pavstar619 said:
Hey everyone, this guide's mostly for Samsung J7 Users running on 5.1.1: (Skip steps if you've done them )
*Download the Custom Kernel V2 from this thread and flash with TWRP, wipe cache/dalvik, reboot:
http://forum.xda-developers.com/android/development/kernel-custom-kernel-v1-0-samsung-t3246209
*Download this mod from the thread and flash, wipe cache/dalvik and reboot:
http://forum.xda-developers.com/showthread.php?t=2634729
*Download Viper4Android FX 2.3.4.0 from this thread and install apk app:
http://forum.xda-developers.com/showthread.php?t=2191223
After all is done open up Viper, if driver installation pops up choose 1st option (worked for me, no battery drain), reboot. You're good to go. Also for best results I suggest converting Viper4Android into a system app using Titanium or Link2SD etc app. That way audio doesn't go back to default all the time.
Tested and working for: MX Player, Play Music, VLC, hardware speakers etc
Might not work for all apps including some
games.
All Credits go to the respective owners. Have fun :laugh:.
Click to expand...
Click to collapse
Nice man get that you made a guide thanks
rarturo.91 said:
Nice man get that you made a guide thanks
Click to expand...
Click to collapse
No probs, just helping out
thank you vary nuce
pavstar619 said:
No probs, just helping out
Click to expand...
Click to collapse
What J7? M work with this kernel?
sachs said:
What J7? M work with this kernel?
Click to expand...
Click to collapse
I'm running on J700H. Haven't gotten the Marshmallow update yet.
Hi! I've followed every step but viper doesn't work, I don't know why. Please help
You need a permissive kernel to make your day easier.
Download the modified stock or optimized one and flash using TWRP.... then it will work
is it work for J7 PRIME?
The viper4android on samsung device, is really a good thing to all of them who like sound enhancement, even i also, now ... i am samsung galaxy j7 prime SM-G610F user, and i just root my phone successfully today's evening, and install such as couple of app which belong on rooted phone including viper4android but, i m stuck for the same error, the viper4android was install completely-driver status is normal-supported but as soon i as start music, after 3 4 sec it just stop work, i reboot my phone after installing new driver but hopeless, if this is work for sm-g610f, or any way to use this enhancement on my device.. pls help me, i miss my v4a
thanks
When run wicht youtube efect off and need resstart the phone, who, have fix for this problem?
Cannot root the device, after instal the kernel, appear the msg, "SU ISNOT INSTALL THIS IS A PROBLEM" i try install with CFauto root, TWRP RECOVERY and zip of SU, but noot install root, fix this pls
The Ultimate Experience!
Your headphones could be much better than you thought!
It makes my QuadBeat 2 headphones soundbetter than $50 Sennheiser ones. And you can use it with those headphones as well! (tested!)
This is a combination of eXtremeBeats audio mod with my own Viper4Android profiles. It is very versatile, and it works with all headphones & ROMs.
The biggest difference is in the bass, you will be amazed, I can promise you that!
What do you need?
A brain.
Root & Recovery.
50MB of system space are required.
A full system backup!
Viper4Android app (you can download it here).
SELinux set to permissive. (via http://forum.xda-developers.com/showthread.php?t=2524485, google for help)
Any headphones.
What do I have to download? Do you have...
Android 6.0 Marshmallow? Do you encounter any compatibility issues (eg. Maxx audio force closing)? Download version 4.1 Muses of eXtremebeats.
Lollipop? Kitkat? LG Stock? AOSP? Anything but android M 6.0? Download version 5.0 Apollo (or higher) of eXtremeBeats.
eXtremebeats download here: http://forum.xda-developers.com/showthread.php?t=2634729
Download latest apk of Viper4Android FX here: http://vipersaudio.com/blog/?page_id=48
Official thread and credits: http://forum.xda-developers.com/showthread.php?t=2191223
My Viper profiles will be in the attachment below!
How do I install this?
After downloading and placing all the files to your internal storage, do this:
If you have Android 5.0/5.1 then go to developer options and make sure you disable the Nu Player and use Awesomeplayer instead.
Install the correct version of eXtremeBeats zip via the recovery.
Extract the ViPER4Android folder from my zip to your internal storage.
Install Viper4Android app (if you don't have it already), open it, and select Super Audio Quality driver, then reboot.
Open Viper4Android - press the menu button - UI Setting - Expert.
How do I use this?
Connect your headphones - open Viper4Android - press the menu button - Load Effect Profile - and load a profile of your choice!
Which profiles should I use?
If you are on LG based ROM (stock LP, KK) then use LG ROM Bass profile.
If you are using AOSP, use AOSP Bass or AOSP Rock profile.
If you want to create a new profile, then use Basic Template as a template - it has an equalizer made for QuadBeat2 headphones.
If you're using different headphones, then try these profiles first, and customize them to your taste. It will work without any problems.
Do not be afraid to experiment with Viper, try all the settings, change them, combine them, create new profiles and most of all, don't forget to press thanks!
Note: I did not create the eXtremeBeats mod, but I felt like I have to share my combination with you, because the music sounds amazing, no matter the ROM (stock/AOSP).
Wow! My headset sounds great! Thanks op well done! :good:
Added to index
[INDEX][LG G2] ROMs, Kernels, Guides and more
Sorry but i am kinda noob. I extracted your zip and found 3 folders DDC, Kernel & Profile (AOSP BASS, AOSP ROCK Basic Template & LG ROM Bass ). And i don't have any idea which folder where to place required your help.
Profiles need to be place in viper/profiles but i dont know abour other files
And one more thing everytime i am opening viper app it is asking to install driver which i have done already multiple times.
rajkatiyar07 said:
Sorry but i am kinda noob. I extracted your zip and found 3 folders DDC, Kernel & Profile (AOSP BASS, AOSP ROCK Basic Template & LG ROM Bass ). And i don't have any idea which folder where to place required your help.
Profiles need to be place in viper/profiles but i dont know abour other files
And one more thing everytime i am opening viper app it is asking to install driver which i have done already multiple times.
Click to expand...
Click to collapse
All 3 folders should be extraced to the ViPER4Android folder in the sdcard folder (meaning the DDC, Kernel and Profile folder is inside ViPER4Android folder).
Did you grant Viper root permissions? Did you reboot after isntalling the driver? Is your SELinux set to permissive? If so, then try to google for help.
danek731 said:
All 3 folders should be extraced to the ViPER4Android folder in the sdcard folder (meaning the DDC, Kernel and Profile folder is inside ViPER4Android folder).
Did you grant Viper root permissions? Did you reboot after isntalling the driver? Is your SELinux set to permissive? If so, then try to google for help.
Click to expand...
Click to collapse
Root Permissions - Yes
Reboot - Yes
SELinux- Yes
No alternative for 4.4.2?
You can use same for that too.
rajkatiyar07 said:
Root Permissions - Yes
Reboot - Yes
SELinux- Yes
Click to expand...
Click to collapse
Well, then try Google, because I have no idea what went wrong. It is a problem with Viper.
bouighil said:
No alternative for 4.4.2?
Click to expand...
Click to collapse
What do you mean no alternative? It does work for 4.4.2, just use the 5.0 version, as mentioned.
danek731 said:
What do you mean no alternative? It does work for 4.4.2, just use the 5.0 version, as mentioned.
Click to expand...
Click to collapse
Sorry i was confused lol
I've tried your tutorial and i just can say WOOOOOOOOOW awamzing bass and sound. Tnx
Tried this mods with kitkat based optimusflex rom at work as it should feels like my ears will blow
sheikhramnuj said:
Tried this mods with kitkat based optimusflex rom at work as it should feels like my ears will blow
Click to expand...
Click to collapse
Try setting the UI settings to Expert in the Viper menu, and lower the bass boost a bit.
Or, if you like it that way, try playing with the settings a bit.
Please try to share it with more people, as I feel it does not get as much views as it deserves.
danek731 said:
Try setting the UI settings to Expert in the Viper menu, and lower the bass boost a bit.
Or, if you like it that way, try playing with the settings a bit.
Please try to share it with more people, as I feel it does not get as much views as it deserves.
Click to expand...
Click to collapse
Thanks for the tips mate. I just reduce some bass effects. I already share your mods to our facebook group and they like it very much of course all credits goes to you Keep it up!
i am enjoying this thing ,,just wow.. where can i find more profiles ? any 1 ?
rajkatiyar07 said:
i am enjoying this thing ,,just wow.. where can i find more profiles ? any 1 ?
Click to expand...
Click to collapse
Just load up basic template profile (with the equalizer only) and try setting things up by yourself! Set the UI settings (in the Viper menu) to Expert, and try changing the Convolvers
danek731 said:
Just load up basic template profile (with the equalizer only) and try setting things up by yourself! Set the UI settings (in the Viper menu) to Expert, and try changing the Convolvers
Click to expand...
Click to collapse
Thanks for replying bud.. I live in India .. It is 5 AM here .. I think i am gonna my office today lol. i am new thats why i was asking for cooked meal. but i think i am on my own in this business :silly: will figure out soon how things work.
Just tried this mod and i'm not sure I did things correctly and just want to make sure of a few things.
1.) I am using a 5.1.1 rom so I installed extremebeats 5.0. Is that correct?
2.) I see that there were 4 apks installed into my system\app folder, but not in a specific app folder like other system apps. Also, those apps don't show up in my apps list. Is this all normal? Am I supposed to have access to those apps for any reason?
Thanks for any help....
flyinjoe13 said:
Just tried this mod and i'm not sure I did things correctly and just want to make sure of a few things.
1.) I am using a 5.1.1 rom so I installed extremebeats 5.0. Is that correct?
2.) I see that there were 4 apks installed into my system\app folder, but not in a specific app folder like other system apps. Also, those apps don't show up in my apps list. Is this all normal? Am I supposed to have access to those apps for any reason?
Thanks for any help....
Click to expand...
Click to collapse
You cant install V4A on 5.1.1 . Perform a full backup if you are going to try. You can flash Extremebeats too but as i said before run a full backup in recovery to secure your device and avoiding bootloops . Before all these check if your SELinux is set to permissive .
---------- Post added at 12:46 PM ---------- Previous post was at 12:42 PM ----------
My goodness i collected lot of irs and now going to mess with them . God help me if i could create some wonder
rajkatiyar07 said:
You cant install V4A on 5.1.1 . Perform a full backup if you are going to try. You can flash Extremebeats too but as i said before run a full backup in recovery to secure your device and avoiding bootloops . Before all these check if your SELinux is set to permissive .
---------- Post added at 12:46 PM ---------- Previous post was at 12:42 PM ----------
My goodness i collected lot of irs and now going to mess with them . God help me if i could create some wonder
Click to expand...
Click to collapse
I believe the problem is somewhere else, because I use BlissPop based on CM 12.1 (Android 5.1.1) and I am using Viper.
So, you can install Viper on Android 5.1.1.