[ROM][OFFICIAL] CyanogenMod 12.0 - Nexus 7 Original Development

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
IMPORTANT INFORMATIONS
We will not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our instructions word by word
are unfriendly
WIKI
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/Grouper_Info
INSTRUCTIONS
First time installing CyanogenMod 12.0 to your Nexus 7 or coming from another ROM:
Read the official Wiki page
DO A BACKUP
Unlock your bootloader if you haven't done so already
Flash the preferred (touch / non-touch) Grouper recovery image from http://www.clockworkmod.com/rommanager via Fastboot
DO A DATA WIPE / FACTORY RESET
Push GApps and the CM 12.0 zip to your device
Boot into Recovery
Flash the CM 12.0 zip from SD card
Flash GApps for Lollipop from SD card
Reboot (be patient, "optimizing apps" takes a while)
Don't restore system data using Titanium Backup!
Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 12.0:
Push the new CM 12.0 zip to your SD card
Boot into Recovery
DO A BACKUP
Flash the CM 12.0 zip from SD card
Optionally flash the most recent GApps for Lollipop if you encounter problems
Reboot (be patient, "optimizing apps" takes a while)
Upgrading from CyanogenMod 11.0:
Read the last paragraphs from http://www.cyanogenmod.org/blog/the-l-is-for-lollipop
DO A BACKUP
Push GApps and CM 12.0 ZIP to your SDCard
Boot into Recovery
Flash the CM 12.0 zip from SD card
Flash GApps for Lollipop from SD card
Reboot (be patient, "optimizing apps" takes a while)
DOWNLOADS
Official CM 12.0 builds: http://download.cyanogenmod.org/?device=grouper
ClockworkMod-Recovery: http://www.clockworkmod.com/rommanager (search for "Google Nexus 7")
Google Apps: https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141109-signed.zip
CM compatible F2FS recovery: https://www.androidfilehost.com/?fid=95916177934528848
BUGS
Report bugs for nightly builds at https://jira.cyanogenmod.org/browse/NIGHTLIES. Please keep in mind that not all features are implemented yet and bugs are expected at this stage.
XDA:DevDB Information
CyanogenMod 12.0, ROM for the Nexus 7
Contributors
Thömy
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.1.x
Based On: AOSP
Version Information
Status: Nightly
Created 2015-01-08
Last Updated 2015-02-14

Reserved
Nightlies now have experimental support for F2FS for /data and /cache. A compatible recovery is requiried.
WARNING
The F2FS version used by CM is newer than the one used by existing ROMs, recoveries and custom kernels. Features like inline_dentry and inline_data have been enabled to save disk space and improve the performance. Those features are not available on older kernels and this can cause corruption and data loss if you switch back! Just rebooting into a unsupported recovery can be enough. Always make a backup when you switch ROMs!
You can find a compatible recovery in the first post.

Thnak you very much!

Works only with ext4 partitions?

Libertunas said:
Works only with ext4 partitions?
Click to expand...
Click to collapse
I use this partitions:
/system ext4
/data f2fs
/cache f2fs
Waiting for someone to post all-f2fs rom image to convert /system to f2fs

Coming from stock i will flash this rom, just wondering which kernal you guys would advise me to install.
Dont want anything fancy, i want its to be fast and perhaps support setcpu (and work with this rom obviously)
---------- Post added at 01:28 PM ---------- Previous post was at 12:51 PM ----------
Hmm i tried to install this using team win recovery and it gave me the error:
Cant install this package on top of incompatible data. please try another package or run a factory reset
E: error executing update binary in zip .... location.

Is the Grouper specific CWM recovery needed or will any recovery do?

Slim1023 said:
Is the Grouper specific CWM recovery needed or will any recovery do?
Click to expand...
Click to collapse
I've used TWRP 2.8.3.0

factory reset did the trick in CWM

No f2fs full support?

Ask to @adomol to convert it to All-f2fs
Or try yourself

19dragon98 said:
Ask to @adomol to convert it to All-f2fs
Or try yourself
Click to expand...
Click to collapse
Sorry for the off topic question... i see the word "f2fs" coming by a lot.
I googled it and i know what it stands for now but why would i pick this over non f2fs?

anheuer said:
Sorry for the off topic question... i see the word "f2fs" coming by a lot.
I googled it and i know what it stands for now but why would i pick this over non f2fs?
Click to expand...
Click to collapse
It makes the tablet a lot faster.

19dragon98 said:
Ask to @adomol to convert it to All-f2fs
Or try yourself
Click to expand...
Click to collapse
how can I convert it to f2fs?

Anyone else loose root?
---------- Post added at 02:31 PM ---------- Previous post was at 02:29 PM ----------
-Lawless said:
Anyone else loose root?
Click to expand...
Click to collapse
Never mind....must enable in Dev options I think.
---------- Post added at 02:43 PM ---------- Previous post was at 02:31 PM ----------
-lawless said:
anyone else loose root?
---------- post added at 02:31 pm ---------- previous post was at 02:29 pm ----------
never mind....must enable in dev options i think.
Click to expand...
Click to collapse
that did it

It is very slugish on my tablet. Using stock kernel, anything else removes root. So if I want it to be smooth I should go for F2fs then?

fosco_ said:
I use this partitions:
/system ext4
/data f2fs
/cache f2fs
Waiting for someone to post all-f2fs rom image to convert /system to f2fs
Click to expand...
Click to collapse
Are you sure? I got stuck on boot with /cache being f2fs.
Actually, it looks like f2fs doesn't work for /data either. It just prompts me for an encryption password.

Rafase282 said:
It is very slugish on my tablet. Using stock kernel, anything else removes root. So if I want it to be smooth I should go for F2fs then?
Click to expand...
Click to collapse
I use this kernel: http://forum.xda-developers.com/showthread.php?t=2905589 and it's reaaally smooth. Be careful though, as it is still in alpha state. However development on it ist going pretty good [emoji106]

battery life
how is the battery life on cm12?

mohsanraza97 said:
how is the battery life on cm12?
Click to expand...
Click to collapse
Depends on your usage. Give it a try.

Related

[ROM][4.4][Unofficial] CyanogenMod 11.0 [1 Dec 2013]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (Kit Kat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
Coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Install the Google Apps addon package.
NOTE :-> IF you are GSM user, then flash GSMPatch v2 from 2nd post
What works:
Data/calls
Camera
WiFi
Bluetooth
GPS
LEDs
Speakers
Doesn't work:
You tell me
Download Links
CyanogenMod:
Nightly: http://fs1.androidfilesharing.com/8f662f85c6f05ead
NOTE: Can only be flashed with latest CWM(6.0.4.4)
Google apps addon:
Download: http://d-h.st/3k8
Device Wiki
http://wiki.cyanogenmod.org/w/Dlx_Info
Sources
CM Source
Sources
CREDITS
+ CHAD0989
+ CRPALMER
+ INVISIBLEK
XDA:DevDB Information
[ROM][4.4][Unofficial] CyanogenMod 11.0 [1 Dec 2013], a ROM for the HTC Droid DNA
Contributors
amit_sen, chad0989, crpalmer, invisiblek
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Beta Release Date: 2013-12-01
Created 2013-11-16
Last Updated 2013-12-01
CWM Recovery
http://flyhalf205.com/recoveries/recovery-clockwork-touch-6.0.4.5-dlx.img
Credits :: Flyhalf205
FAQ
Q1. `OK Google` feature not working.
A1. Select GE launcher to enable it. Its in gapps package. Launcher3 is not having this feature.
Q2. If apps are fc`ing, root is not sticking.
A2. Make sure you are NOT using ART. ART is for dev. purposes. Many apps are not designed to use ART currently. Dont report any bugs when you are using ART runtime method.
Q3. Titanium Backup is not restoring apps.
A3. Set your backup dir for Titanium Backup as ::
storage/emulated/legacy/TitaniumBackup
After setting backup dir, System will prompt to move your backups from previous dir to new correct one.
Then proceed with restoring backups.
GSM Patch
Attached file ::
Device Wiki
http://wiki.cyanogenmod.org/w/Dlx_Info
Is that the correct twrp number? I only see 2.6.3.0 on their downloads page. http://techerrata.com/browse/twrp2/dlx
Looks like it was changed to CWM now.
Technogen said:
Is that the correct twrp number? I only see 2.6.3.0 on their downloads page. http://techerrata.com/browse/twrp2/dlx
Click to expand...
Click to collapse
Same question here but I will flash cwm if I have to
Sent from my dlx using XDA Premium HD app
Yay
Sent from my dlx using Tapatalk
Technogen said:
Is that the correct twrp number? I only see 2.6.3.0 on their downloads page. http://techerrata.com/browse/twrp2/dlx
Looks like it was changed to CWM now.
Click to expand...
Click to collapse
texaswickedtoys said:
Same question here but I will flash cwm if I have to
Sent from my dlx using XDA Premium HD app
Click to expand...
Click to collapse
Iam using cwm 6.0.4.4. Its working fine.
Not sure about TWRP. It has not been updated to latest release for our device. Mist probably it wont work
DNA | ⓣⓐⓟⓐⓣⓐⓛⓚ | TF300T
So... How should we go about flashing this lol. Cwm 6.0.4.4 does not exist for our phones?
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Downloading now thanks for the release
Sent from my dlx using XDA Premium HD app
Let's Do It!!
Anyone tried PA 0-Day 4.4 Gapps with this?
I'm fairly sure twrp won't work to flash kit kat yet. HTC one has 2.6.3.3, but it appears it has issues with jelly bean instead. Seems like clockwork is the safe route to go with for now.
Sent from my HTC6435LVW using xda app-developers app
Does CWM factory reset wipe sdcard?
does anyone have another link for cwm 6.0.4.4? link isnt working
DirtySimpleClean said:
So... How should we go about flashing this lol. Cwm 6.0.4.4 does not exist for our phones?
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
DirtySimpleClean said:
does anyone have another link for cwm 6.0.4.4? link isnt working
Click to expand...
Click to collapse
Check 2nd post.
armydog13 said:
Does CWM factory reset wipe sdcard?
Click to expand...
Click to collapse
Nops.
danjull said:
I'm fairly sure twrp won't work to flash kit kat yet. HTC one has 2.6.3.3, but it appears it has issues with jelly bean instead. Seems like clockwork is the safe route to go with for now.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Yups.
armydog13 said:
Anyone tried PA 0-Day 4.4 Gapps with this?
Click to expand...
Click to collapse
Flash the gapps posted in OP.
DNA | ⓣⓐⓟⓐⓣⓐⓛⓚ | TF300T
Can someone who flash the rom post some screenshot
Thanks
Wait wait. Is this going to be the official cm 11 thread or is this a kang.?
Sent from my HTC6435LVW using Tapatalk
Gorilla* said:
Wait wait..s this going to be the official cm 11 thread or is this a kang.?
Sent from my HTC6435LVW using Tapatalk
Click to expand...
Click to collapse
Umm the clock work mod is in a .img don't I need it to end in .zip to flash. Anyone know where the .zip for the clock work mod 6.0.4.5 is?
Booted
Booted, then froze first time. Did Factory Reset and booted again. CM Account crashed once. Logged in. So far, everything is starting up.
Edit: Google Play Services crashed. Soft Rebooted. Seems to be Hangouts causing the crash.
Edit: Not Hangouts. Seems be happening with all google apps. Going to redownload everything and try again.
mattking45 said:
Umm the clock work mod is in a .img don't I need it to end in .zip to flash. Anyone know where the .zip for the clock work mod 6.0.4.5 is?
Click to expand...
Click to collapse
Fastboot flash recovery recovery.img
---------- Post added at 12:46 PM ---------- Previous post was at 12:40 PM ----------
Recovery files are not flashed in recovery, it is done in fastboot mode.
---------- Post added at 12:46 PM ---------- Previous post was at 12:46 PM ----------
Recovery files are not flashed in recovery, it is done in fastboot mode.
orangechoochoo said:
Fastboot flash recovery recovery.img
Click to expand...
Click to collapse
So even though I'm s-off I just go into fastboot > recovery > then I flash it....... Its not showing up in recovery

[ROM][4.4.4][YP-G70][UNOFFICIAL]CyanogenMod 11.0

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Whats working?
Screen
Wifi
Bluetooth
Camera (VGA mode)
Click to expand...
Click to collapse
Whats not working?
Click to expand...
Click to collapse
XDA:DevDB Information
CyanogenMod for the Galaxy Player 5, ROM for the Samsung Galaxy Player 4.0, 5.0
Contributors
iurnait, android1234567, JackpotClavin, Mevordel, zaclimon, Meticulus
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Need to be running 4.2 or above to install.
Version Information
Status: Stable
Stable Release Date: 2014-07-12
Created 2014-07-06
Last Updated 2014-10-12
Reserved
Notes:
Builds on/after Dec. 24 will have LVMv2 implemented (thanks to @Meticulus), where mmcblk0p13 (/system), mmcblk0p14 (/system/vendor), and mmcblk0p16 (/data) are placed in a logical volume group. This enables /system to be enlarged from 290MB to 600MB (or more as necessary later on). The packages that were removed from the first build (Apollo, File Manager, etc.) have all been re-added. Also, the removal of the vendor hack means that from now onwards, there is no need to reflash gapps after updating the rom.
-Installation Notes
--On the first flash, if the system logical volume is not present or
is less than 600M there is an assert error. This is so that if anyone
needs to backup information contained in /data, they can. In order to
proceed with the installation, the zip must be flashed a 2nd time.
--During the 2nd flash partitions in the logical group are wiped and
the logical volumes are created and formated then the /etc/fstab and
/etc/recovery.fstab are switched so that, when we hand everything off
to the normal rom installer, the new logical volumes are mounted.
-Reverting to a PRE-LVM ROM
--In the YP-G70 the "recovery", be it CWM or TWRP and in the kernel's
recovery-ramdisk. So in order to get a different recovery you just
flash a different kernel. So to get back to a PRE-LVM ROM, you just:
1. Reboot to recovery like normal.
2. Flash your PRE-LVM ROM like normal.
-- Note: All we really care about at this point is that the kernel
(boot.img) gets flashed. Ignore any other errors!
3. After the flash, Power off.
4. Hold volume up and power on, till you get to recovery.
5. Full wipe, including /system
Click to expand...
Click to collapse
Installation Instructions:
1. Reboot to recovery and make backup.
2. Do a full wipe.
3. Flash rom. You will see an error pop up. This is perfectly normal. Flash the rom again
4. Flash Gapps.
5. Flash US kernel if necessary
6. Have fun!
Update Instructions:
1. Reboot to recovery and make a backup
2. Wipe cache/dalvik cache
3. Flash rom
4. Flash US kernel if necessary.
5. Enjoy!
The links below are old downloads; please see the Downloads tab at the top for current release:
ROM: cm-11-20140517-UNOFFICIAL-venturi.zip - 175.13 MB
Gapps: Any will work, but I recommend PA's Mini Modular Package from http://forum.xda-developers.com/showthread.php?t=2397942.
Note: Builds now include a unified kernel, so there is no need to flash an additional kernel for any device
Click to expand...
Click to collapse
Previous builds
ROM: cm-11-20140414-UNOFFICIAL-venturi.zip - 170.86 MB
US Kernel: USA-Kernel-venturi-Apr-16.zip - 6.27 MB
Click to expand...
Click to collapse
ROM: cm-11-20140113-UNOFFICIAL-venturi.zip - 182.07 MB
US Kernel: cm11-USKernel-Jan12.zip - 5.80 MB
Click to expand...
Click to collapse
ROM: cm-11-20131224-UNOFFICIAL-venturi.zip - 176.60 MB
US Kernel: cm11-USKernel-Dec24.zip - 5.76 MB
Gapps: http://www.androidfilehost.com/?fid=23269279319196268
Notes: This includes the fixes made by Meticulus to the camera, so now the back facing camera takes pictures if you set it to VGA. Note that if you are updating from the previous build, there is no need to reflash gapps. However, US users still need to flash the US kernel after flashing this rom.
If you are coming from a build before Dec. 24, keep in mind that data will have to be wiped in order for lvm to be setup. The installer will give you a warning the first time you try flashing and then error out so that you can backup your data if you forgot, and then you can flash the zip again.
Notes:
LVMv2 Implemented, see above notes
Click to expand...
Click to collapse
Rom: cm-11-20131215-UNOFFICIAL-venturi.zip - 158.50 MB
US Kernel: cm11-USKernel-Dec15.zip - 5.29 MB
Gapps (Go to the downloads link and grab the gapps core zip): http://forum.xda-developers.com/show....php?t=2012857
Notes:
1. Our system partition is a little tight on space, so i had to remove a few packages during compilation so that everything fits. The things i have removed should all be replaceable with 3rd party apps. Here is a list of what has been removed and what you can use as a substitute:
Code:
CMWallpapers - Google images
Apollo - Any music app
CMFileManager - Any file manager
LockClock - Deskclock
CMUpdater - this is for official cm roms so there was really no need for this
2. Use the Gapps I have linked. Standard Gapps wont work because they are too big for the system partition.
3. This is a beta build, so things may crash or eat your cat. Flash at your own risk and make sure to make a backup before flashing
4. The rom includes the INTL kernel, so US users need to flash the US kernel every time after flashing/updating this rom.
Click to expand...
Click to collapse
reserved
iurnait, i buy a GNII and sale my P5.0 but i looking for jobs you a perfect dev and i think you work for NII can you make it?
Samsung GALAXY Note II (GT-N7100) cihazımdan Tapatalk 4 ile gönderildi.
Can't wait to try it out. Been awaiting this release since the Nexus 5 came out. Im so glad it finally came. THANKS ALOT for supporting such an old device.
Initial release:
Notes:
1. Our system partition is a little tight on space, so i had to remove a few packages during compilation so that everything fits. The things i have removed should all be replaceable with 3rd party apps. Here is a list of what has been removed and what you can use as a substitute:
Code:
CMWallpapers - Google images
Apollo - Any music app
CMFileManager - Any file manager
LockClock - Deskclock
CMUpdater - this is for official cm roms so there was really no need for this
2. Use the Gapps I have linked. Standard Gapps wont work because they are too big for the system partition.
3. This is a beta build, so things may crash or eat your cat. Flash at your own risk and make sure to make a backup before flashing
4. The rom includes the INTL kernel, so US users need to flash the US kernel every time after flashing/updating this rom.
Installation instructions:
1. Make a backup!
2. Wipe data, cache, and dalvik cache.
3. Install rom zip
4. Install US kernel if necessary
5. Install Gapps.
6. Reboot.
7. Profit
8. ???
Links
Rom: http://d-h.st/16c
US Kernel: http://d-h.st/ItN
Gapps (Go to the downloads link and grab the gapps core zip): http://forum.xda-developers.com/showthread.php?t=2012857
Would it be possible in the future to be able to repartition an external SD card so you could add more space for system apps?
Sent from my YP-G1 using Tapatalk 4
can't edit build.prop for some reason. other than that so far so good. will post more as i run into it
I Originally Flashed The Initial Release Of SlimKat With The Broken Twrp Recovery. Any Way I Can Fix It And Flash CM11?
Sent from my YP-G70 using xda app-developers app
dorfd1 said:
Would it be possible in the future to be able to repartition an external SD card so you could add more space for system apps?
Sent from my YP-G1 using Tapatalk 4
Click to expand...
Click to collapse
Well a solution we were looking into was increasing the size of the system partition during updating like the aries people have done
Lorddemonrage said:
can't edit build.prop for some reason. other than that so far so good. will post more as i run into it
Click to expand...
Click to collapse
What app are you using to edit build prop?
FweaKiid305 said:
I Originally Flashed The Initial Release Of SlimKat With The Broken Twrp Recovery. Any Way I Can Fix It And Flash CM11?
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
If recovery is broken then there is probably not a way to flash this rom with twrp. You could try grabbing the boot.img from the zip and use something like flashify to install it (although im not sure if it would work)
iurnait said:
If recovery is broken then there is probably not a way to flash this rom with twrp. You could try grabbing the boot.img from the zip and use something like flashify to install it (although im not sure if it would work)
Click to expand...
Click to collapse
I Just Tried To Use It, It Said My Device Is Incompatible. It Seems I'm Stuck On This ROM.
Sent from my YP-G70 using xda app-developers app
This is awesome! Keep up the good work!
I'll probably put screenshots here too.
Very nice! Cm11 Lovin' it!
Though is there a way to get transparent status bar? Transparent status bar doesn't seem to working.
Oh my... Flashing this immediately! Thank you!
Sent from my Nexus 7 using Tapatalk 4
---------- Post added at 10:51 PM ---------- Previous post was at 10:08 PM ----------
Testing now with art... You should also note in the op that this is a 4.4.2 build for selecting the correct banks gapps...
Sent from my Nexus 7 using Tapatalk 4
aznflawless said:
Very nice! Cm11 Lovin' it!
Though is there a way to get transparent status bar? Transparent status bar doesn't seem to working.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=47712934&postcount=7
That same flag is in your build, just comment it or remove it in your build.prop should suffice though there's something from CM that should come soon regarding this functionnality.
zaclimon said:
http://forum.xda-developers.com/showpost.php?p=47712934&postcount=7
That same flag is in your build, just comment it or remove it in your build.prop should suffice though there's something from CM that should come soon regarding this functionnality.
Click to expand...
Click to collapse
So changing low ram to false will enable the transparency? Did I read that correctly?
Sent from my Nexus 7 using Tapatalk 4
iurnait said:
What app are you using to edit build prop?
Click to expand...
Click to collapse
Rom Toolbox and the built in text editor, both no go. also unable to apply fonts from rom toolbox and can't delete bootanimation to replace with other bootanimation.
update 12/17: installed SuperSU and romtoolbox now works correctly, seems built in super user not working fully like in initial release of 4.3
Hot diggetty!
however, as I understand the paradigm, steps 7 and 8 are in the wrong order in the instruction list:
iurnait said:
Installation instructions:
1. Make a backup!
2. Wipe data, cache, and dalvik cache.
3. Install rom zip
...
Click to expand...
Click to collapse
annoyingduck said:
So changing low ram to false will enable the transparency? Did I read that correctly?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Yes. I just did it. Transparent status bar works now!
Works nice for me, thank you for this
For Those who are getting errors (eg. status 7), just flash a 4.3 rom based before jumping from 4.2 to 4.4.
@iurnait
Have you ever heard about Viper4Android? Well, I really like that app, and is a must have for me, but the last rom where it works is CM 10.1 (4.2.2) and looks like that the problem can be fixed by the rom maintener, just have a look here
If is it possible to get Viper4Android works on KitKat in this device should be really nice for me

[UnORom]Pure AOSP 4.4.4[Beta][13th Aug]

UnORoms Project
Presenting you AOSP - using PaceRom ​
UNOFFICIAL VERSION​
About PaceRom AOSP
PaceRom is pure AOSP plus with just enough CAF/CM enhancements to get it to run on a variety of hardware.
​
Credits
Google - For their source
@tdm : For inital PaceRom
CyanogenMod : For device trees
If I have forgotten anyone, I apologise please pm me and i will correct my mistake​
Working
* Mobile Network
* Wifi
* Bluetooth
* Camera - 13M Camera with CM11S camera from http://d-h.st/dBc
* Sound
* Vibration
* Buttons
* Capacitative Button Lights
* Wifi Hotspot
* Proximity Sensor
* NFC
* GPS
* USB Tether
* Compas
... will add more to list as things go on.
​
Not Working
You tell me...
​
Untested
​
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards or you
* getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM before flashing it!
* YOU are choosing to make these modifications.
I am not part of PaceRom, I just compiled this rom for OnePlus One as part of UnoRoms Project. In no way I take the credit for Source​
Screenshots
.... Coming Soon ....​
Instructions
1. Unlock and install latest TWRP Recovery from here
2. Download Latest Release from link below
2. Download Latest GApps from here
3. Boot into recovery
3a. To save your sdcard being wiped out make sure you select Settings > Use rm -rf instead of formatting in TWRP
4. Wipe Factory Reset if coming from other rom
5. Flash Rom
6. Flash Gapps
7. Reboot
8. Feel good
9. Hit Thanks
​
Downloads
ROM
GAPPS
Sources
Device Tree
Kernel
​
XDA:DevDB Information
OnePlus AOSP, ROM for the ONEPLUS ONE
Contributors
shantur
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Beta
Created 2014-08-07
Last Updated 2014-08-13
Reserved
Reserved
shantur said:
[Mod edit: Long quote removed
Click to expand...
Click to collapse
I'm so happy to see somebody from the sensation forum here[emoji1]
erdal67 said:
I'm so happy to see somebody from the sensation forum here[emoji1]
Click to expand...
Click to collapse
Please don't quote OP...
I dont see many people interested in this. I have made everything working.
If anyone finds any issue please report.
Thanks
Ill Test in a few minutes
shantur said:
I dont see many people interested in this. I have made everything working.
If anyone finds any issue please report.
Thanks
Click to expand...
Click to collapse
Quiet threads can be disheartening, but it usually means you've done a good job.. Keep up the good work, and thanks for the build..
Sent from my Nexus S using XDA Premium 4 mobile app
shantur said:
I dont see many people interested in this. I have made everything working.
If anyone finds any issue please report.
Thanks
Click to expand...
Click to collapse
Mate, no real description of the ROM and no screenshots mean that interest will be affected.
The ROM is very fluid and fast but my phone was extremely hot. Other then that its a pretty good AOSP build. Sad to know that there isnt any custom kernels to flash on top of pure AOSP ROM's
What does settings> rm -rf etc mean? I want to try this ROM out, bit I don't want to wipe my device making an error ?
shantur said:
I dont see many people interested in this. I have made everything working.
If anyone finds any issue please report.
Thanks
Click to expand...
Click to collapse
I'm downloading right now.. DL speeds are fairly slow. So that could be a contributing factor why many people aren't downloading.
If you could, please upload to a mirror such as androidhost or etc..
---------- Post added at 10:10 PM ---------- Previous post was at 09:59 PM ----------
Rom wont install for me..
I'm using the latest TWRP & have a A0001 Oneplus One..
It starts the installation, but gets stuck on the progress bar.. :crying:
Spider_Pig27 said:
The ROM is very fluid and fast but my phone was extremely hot. Other then that its a pretty good AOSP build. Sad to know that there isnt any custom kernels to flash on top of pure AOSP ROM's
Click to expand...
Click to collapse
Did you give rom enough time to settle down? You can try the available AOSP kernels, might work.
OmegaBlaze said:
What does settings> rm -rf etc mean? I want to try this ROM out, bit I don't want to wipe my device making an error ?
Click to expand...
Click to collapse
It means recovery wont touch internal sdcard while wiping.
OmegaBlaze said:
I'm downloading right now.. DL speeds are fairly slow. So that could be a contributing factor why many people aren't downloading.
If you could, please upload to a mirror such as androidhost or etc..
---------- Post added at 10:10 PM ---------- Previous post was at 09:59 PM ----------
Rom wont install for me..
I'm using the latest TWRP & have a A0001 Oneplus One..
It starts the installation, but gets stuck on the progress bar.. :crying:
Click to expand...
Click to collapse
For now you can change the model number in install script. I will look into it later.
I just saw this rom; I am very interested. I will try it after work!
I just lost root. Flashing supersu through twrp gives no errors. A message keeps popping about there is no su binary installed....Very frustrating
shantur said:
Did you give rom enough time to settle down? You can try the available AOSP kernels, might work.
It means recovery wont touch internal sdcard while wiping.
For now you can change the model number in install script. I will look into it later.
Click to expand...
Click to collapse
I've tried the kernels but none boot. I gave it about a day to settle. Battery was good but phone was warm.
I am getting a "error executing binary updater script" error...anybody else have this issue?
To those running this ROM, what kernels are you guys using?
Stock kernel. Why this ROM refuses supersu is beyond my comprehension.
Hi, I would like to test but please tell me about problems with root? I need root, so please tell me if it can be rooted and how to root

[WEEKLY BUILDS] CyanogenMod 12.1 for Mate 2 (MT2L03)

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
IMPORTANT, READ THIS
This build is for MT2L03 ONLY
You need TWRP and an unlocked bootloader. You need to have updated to at least B322 before you can install this build.
Recommended TWRP build is HERE.
For Google Apps, look HERE
DOWNLOAD
http://get.cm/?device=mt2
twrp-2.8.7.0-mt2L
SOURCES
Kernel
Device tree
Vendor blobs
XDA:DevDB Information
CyanogenMod 12.1 for Mate 2 (MT2L03), ROM for the Huawei Ascend Mate 2
Contributors
u-ra, mdmower, tdm
Source Code: https://github.com/CyanogenMod/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: At least B322
Version Information
Status: Snapshot
Created 2015-08-18
Last Updated 2016-01-25
You might want to reduce the LCD density in Settings -> Display. We have to leave it at default for various reasons. I use 240 and it's wonderful.
WHAT?!?! Are my eyes deceiving me?!
What?????????????????????????????????????????
Awesome!
Yeah baby, trying tonight!
Sent from my MT2L03 using XDA Free mobile app
thank you! indeed it is wonderful!
YESSSSSSSSS downlading now..
---------- Post added at 03:53 PM ---------- Previous post was at 03:31 PM ----------
my phone is saying
E: Unable to mount '/HWUserData'
superbass311 said:
YESSSSSSSSS downlading now..
---------- Post added at 03:53 PM ---------- Previous post was at 03:31 PM ----------
my phone is saying
E: Unable to mount '/HWUserData'
Click to expand...
Click to collapse
are you using the posted TWRP? or different version?
Resolved. Lol. Whew.
i used all files from this post. made sure my device had b309 flashed. get the bootloader up and fastboot twrp. #success
I've updated the top post. You really need to use that TWRP for the time being.
Thanks. I would suggest anyone using this to force 309 first. Huawei made some odd changes in 321. Bypassing recovery. Maybe that caused his issue? Thanks for this. Renewed hope in a good phone!
There's no need to downgrade to B309. B321 is also fine, there is a workaround posted elsewhere in the forum.
u-ra said:
There's no need to downgrade to B309. B321 is also fine, there is a workaround posted elsewhere in the forum.
Click to expand...
Click to collapse
how do you root CM.. Answered..
In Development Settings is an option for root and adb enabled.
Should already be rooted. Enabled in settings.
Kid_Ding said:
i used all files from this post. made sure my device had b309 flashed. get the bootloader up and fastboot twrp. #success
Click to expand...
Click to collapse
How is it running so far? Smooth? Glitchy? Any issues?
]There's no need to downgrade to B309. B321 is also fine, there is a workaround posted elsewhere in the forum.[/QUOTE]
Some have not been able to boot into twrp with 321. Says its installed but still boots into stock. SHM has been working on it.
---------- Post added at 06:05 PM ---------- Previous post was at 06:02 PM ----------
superbass311 said:
how do you root CM
Click to expand...
Click to collapse
http://getgoogles.blogspot.com/2015/04/how-to-enable-root-access-mode-on.html?m=1)
MikeyLee said:
How is it running so far? Smooth? Glitchy? Any issues?
Click to expand...
Click to collapse
its been much better than what huawei released. less issues with emui out of the way. no glitches within the UI. only issues i've had are with google camera, when going into settings it FC's.
Kid_Ding said:
its been much better than what huawei released. less issues with emui out of the way. no glitches within the UI. only issues i've had are with google camera, when going into settings it FC's.
Click to expand...
Click to collapse
Excellent news! Gonna flash when I am home. Busy day today. Three year old at my age keeps me very busy. Lol. Have you tried any other camera apps? CM camera maybe?

CAF-6.0.1 [Lux]

Hi All,
I've been working on a CAF version for osprey. This is started from kernel and device tree made by Alberto97 and Squid2, so thanks a lot to them for the bringup. This project has been changed in order to work for surnia/osprey and lux.
This version is very early for Lux, but it's been running on osprey and surnia for some weeks/months now.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
For now only a few things are working:
Working
Bluetooth
SMS/RIL
Sound
Camera
Dual sim
Gps
Not working
Nothing really just a few bugs
Binaries
Here
Sources
https://github.com/boulzordev/local_manifests/tree/caf-6.0
This project was initially pure caf, but it now take some repo from CM and some CM commits too for exfat support and Audio/Video features.
XDA:DevDB Information
CAF-6.0 [Lux], ROM for the Moto X Play
Contributors
scritch007, squid2, Alberto97
Source Code: git://codeaurora.org/platform/manifest.git
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP
Based On: CAF
Version Information
Status: Beta
Created 2016-01-16
Last Updated 2016-01-16
Changelog
lux-caf-87.zip
Updated to latest version of CM13 device specific + CM13 kernel)
Updated to LA.BR.1.2.7-00910-8x09.0.xml (February security patch)
Fixed the ringtone setting issue
Using frameworks_av from CM13 from now on.
lux-caf-86.zip
Fix setting ringtone
Fix invalid number error when the call is ended by the other end
Sepolicy from cm imported (getting ready for Sepolicy being enabled)
lux-caf-85.zip
Settings for light management ( When opening settings values reset to default)
Dual sims outgoing should be fine now
Updated frameworks_av with CM commits
Now building osprey/lux/surnia at the same time, this is why the version is 85
Rebased with newest version of LA.BR.1.2.7
Backup script when flashing in recovery. This works with open gapps. This means gapps are copied and restored when flashing
Nicely done
Wow.One more dev for our beloved Moto x play.Thanks for your good work and keep it up.
Thanks!!
pyr0sphere said:
Thanks!!
Click to expand...
Click to collapse
Changing network modes on XT1562 RetAsia Dual Sim is messed up, and sim cards can't be disabled. https://github.com/AOSParadox/android_packages_services_Telephony/commits/yu-caf-6.0 picking teh stuff from here should fix it.
How is the speakerphone in this build?
Hows this??anyone tried??
ZeroVirus said:
Hows this??anyone tried??
Click to expand...
Click to collapse
Yes....been using this for a week now.....its very smooth and everything is working fine here xt1562 dual sim
this is flashable zip??and can i flash on lollipop??
ZeroVirus said:
this is flashable zip??and can i flash on lollipop??
Click to expand...
Click to collapse
You must do a clean flash
means???can you tell me the whole process??i am on 5.1.1
ZeroVirus said:
means???can you tell me the whole process??i am on 5.1.1
Click to expand...
Click to collapse
wipe everything except sdcard and internal data, flash new rom and gapps, maybe factory reset again to be on the safe side. should work then. And backup everything first!
ok bro
---------- Post added at 03:24 PM ---------- Previous post was at 03:23 PM ----------
thnks n last hows backup?
ZeroVirus said:
ok bro
---------- Post added at 03:24 PM ---------- Previous post was at 03:23 PM ----------
thnks n last hows backup?
Click to expand...
Click to collapse
I use titanium backup to backup apps and data and copy all my pics and data to my laptop. twrp can also do full backups but i havent used this functionality
ZeroVirus said:
ok bro
---------- Post added at 03:24 PM ---------- Previous post was at 03:23 PM ----------
thnks n last hows backup?
Click to expand...
Click to collapse
Backup your current rom using the backup function of twrp on SD card.
If anything goes wrong restore it.
Sent from my XT1562 using Tapatalk
Has anyone else had a problem installing Supersu? After installing supersu my system doesn't boot up.
et.nuclear said:
Has anyone else had a problem installing Supersu? After installing supersu my system doesn't boot up.
Click to expand...
Click to collapse
Flash 2.52 it works fine
Settings crashes when tried to set ringtone anyone fixes ..?
Does it takes more time to boot..?
Picking up the phone doesn't wake up the lockscreen. Is there a way to possibly implement something like CM?

Categories

Resources