Hi,
SCH-I545 came with no imei, rom was on it I9500 so I decidet to flash its original SCH-I545 stock rom with 4.4.2 but now phone is with unknown baseband,
I also try to flash it with pit file but no luck, Is there any way to to restore it,
br
knock knock knock pls help
Have you tried flashing a modem?
Sent from my NCC-1701 using Tapatalk.
riker147 said:
Have you tried flashing a modem?
Sent from my NCC-1701 using Tapatalk.
Click to expand...
Click to collapse
yes already tried it with odin
nsnobel2 said:
yes already tried it with odin
Click to expand...
Click to collapse
Have you tried flashing a full wipe stock tar file through Odin?
Related
I cant seem to find this, but is it possible to flash modems on the 3e recovery on complete stock? I accidentally updated to 2.3.6 after bricking my phone and can not work with the UCKH6 modem. Thank you in advance!
jaguars34 said:
I cant seem to find this, but is it possible to flash modems on the 3e recovery on complete stock? I accidentally updated to 2.3.6 after bricking my phone and can not work with the UCKH6 modem. Thank you in advance!
Click to expand...
Click to collapse
No you can't flash modems on 3e recovery but you can use Odin or heimdall to flash it.
Sent from my GT-I9100 using xda premium
Waddle said:
No you can't flash modems on 3e recovery but you can use Odin or heimdall to flash it.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
. . . or Mobile Odin
Sent from my Galaxy S II (i777)
Hello guys ,
i have got a question. If I install CWM and CyanogenMod, can I reflash StockROM without any problems (with Stock Recovery and original kernel,baseband and csc)?
Can I use a one-piece flashfile for that or I have to use a three-part flashfile?
If I have to use a three-part flashfile, where can I get it? On samfirmware.com are only one-piece firmwarefiles...
Greetings...
Shouldn't be any problems, back up sd card in case you need to factory reset to get it to boot
slaphead20 said:
Shouldn't be any problems, back up sd card in case you need to factory reset to get it to boot
Click to expand...
Click to collapse
And if I flash CyanogenMod, how can I reflash the StockROM with all original things, like CSC, Baseband etc?
TheRealFelix0212 said:
And if I flash CyanogenMod, how can I reflash the StockROM with all original things, like CSC, Baseband etc?
Click to expand...
Click to collapse
I'll use pre-rooted stock rom from here . All things you've asked are included in package. If you use TA and do Factory Reset your phone will be rooted and Official/Normal at the same time
Sent from my GT-I9305 using xda app-developers app
TheRealFelix0212 said:
And if I flash CyanogenMod, how can I reflash the StockROM with all original things, like CSC, Baseband etc?
Click to expand...
Click to collapse
CSC is Samsung feature, not included in cm/aosp, modem....just make a note of you baseband, and if the Rom flash changes it just re-flash modem
djembey said:
I'll use pre-rooted stock rom from here . If you use TA and do Factory Reset your phone will be rooted and Official/Normal at the same time
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Okay, but if I wanna flash the original unrooted ROM, how I must do it?
Use Odin and flash Stock ROM from here
Sent from my GT-I9305 using xda app-developers app
TheRealFelix0212 said:
Okay, but if I wanna flash the original unrooted ROM, how I must do it?
Click to expand...
Click to collapse
Download the stock rom of your choice from SamFirmware, then flash with odin. Then boot into the phone's recovery and factory reset then reboot and voila.
djembey said:
Use Odin and flash Stock ROM from here
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Are there CSC and Phone Files included too?
Theshawty said:
Download the stock rom of your choice from SamFirmware, then flash with odin. Then boot into the phone's recovery and factory reset then reboot and voila.
Click to expand...
Click to collapse
And I don't have to Re-Partition and flash CSC and Phone files?
TheRealFelix0212 said:
Are there CSC and Phone Files included too?
Click to expand...
Click to collapse
Yes, in a 1 part firmware you get csc, phone, modem
slaphead20 said:
Yes, in a 1 part firmware you get csc, phone, modem
Click to expand...
Click to collapse
So you say that in a 1 part firmware are the same files as in the three-part firmware? That's nice! ^^
TheRealFelix0212 said:
Are there CSC and Phone Files included too?
Click to expand...
Click to collapse
Yes, Modem, Kernel, CSC...
Open in Odin as PDA
TheRealFelix0212 said:
And I don't have to Re-Partition and flash CSC and Phone files?
Click to expand...
Click to collapse
Don't tick re-partition! Just F.Reset and auto reboot
Sent from my GT-I9305 using xda app-developers app
djembey said:
Yes, Modem, Kernel, CSC
Don't tick re-partition! Just F.Reset and auto reboot
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
That's very nice...
Before I got my SIII, I used a Galaxy Fit and there I needed all files to flash my Firmware...
That's very nice to hear. Then are the other fields for files only for that if I especially want one of these files and not for flashing a new ROM?
Yes, it's optional. If you want to use for example a Rescue Firmware you'll need much more files and then more options must be ticked
Sent from my GT-I9305 using xda app-developers app
djembey said:
Yes, it's optional. If you want to use for example a Rescue Firmware you'll need much more files and then more options must be ticked
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
What's a Rescue Firmware?
Sorry, I don't know so much about SGS-III because I only have it since december 2012...
TheRealFelix0212 said:
What's a Rescue Firmware?
Sorry, I don't know so much about SGS-III because I only have it since december 2012...
Click to expand...
Click to collapse
Explanation and firmware here
http://forum.xda-developers.com/showthread.php?p=30087735
slaphead20 said:
Explanation and firmware here
http://forum.xda-developers.com/showthread.php?p=30087735
Click to expand...
Click to collapse
Thanks, and this Rescue ROM is for making a factory condition?
Yes and No. I've just used it as Example to explain why there's more options in Odin. Rescue ROM is for bricked phones, if you flash accidentally with wrong ROM it can bring your phone back to life
Sent from my GT-I9305 using xda app-developers app
TheRealFelix0212 said:
Thanks, and this Rescue ROM is for making a factory condition?
Click to expand...
Click to collapse
Yes, but do not use unless you have too, it contains a .pit file which is the partition layout, .....not to be messed with unless absolutely necessary
Hi guys this is my first post after reading XDA for years successfully rooting my droids. Thank you all for all your help and useful information!!
Im running MDK based firmware and I need to go back to 100% bone stock and I am confused on what method works? I have seen several versions based on different firmwares, but nothing specific to MDK, will this method work? http://forum.xda-developers.com/showthread.php?t=2301259
or can you guys point me in the right direction?!?!
Phone works fine not bricked running Hyperdrive v14 but need to wipe everything and return to stock so I can use my warranty..Help it expires 6/3
That's the right guide, just use the tar for mdk
Sent from my SCH-I545 using Tapatalk
joshm.1219 said:
That's the right guide, just use the tar for mdk
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
AWESOME! Thank you!
I flashed but I am suck on the the verizon screen??!?!
LeftysDroids said:
AWESOME! Thank you!
I flashed but I am suck on the the verizon screen??!?!
Click to expand...
Click to collapse
Did you try the full wipe tar? Also are you positive you're on MDK now and you downloaded the mdk tar? And did the md5 match on your download?
These are the most basic things that would prevent your phone from booting.
Sent from my SCH-I545 using Tapatalk
joshm.1219 said:
Did you try the full wipe tar? Also are you positive you're on MDK now and you downloaded the mdk tar? And did the md5 match on your download?
These are the most basic things that would prevent your phone from booting.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Problem fixed. I rebooted in recovery after flashing the MDK tar and did a full factory wipe and it booted right up!
Thank you again
LeftysDroids said:
Problem fixed. I rebooted in recovery after flashing the MDK tar and did a full factory wipe and it booted right up!
Thank you again
Click to expand...
Click to collapse
Good to hear!
Sent from my SCH-I545 using Tapatalk
Help please! my samsung S3 no signal after wrong root..how can i do now??
Follow the guide to flash back to full stock firmware with Odin then factory reset in recovery.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Follow the guide to flash back to full stock firmware with Odin then factory reset in recovery.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
ok! thanks i'll try...
boomboomer said:
Follow the guide to flash back to full stock firmware with Odin then factory reset in recovery.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thanks it work now! after reflash to the stock room and the signal show it again..Thanks!
Trying to update the firmware. My baseband says ng3 but my build is still nf6. Is the build number the firmware or modem?
Sent from my SM-G900T using JellyBombed Tapatalk 2
Josh McGrath said:
Trying to update the firmware. My baseband says ng3 but my build is still nf6. Is the build number the firmware or modem?
Sent from my SM-G900T using JellyBombed Tapatalk 2
Click to expand...
Click to collapse
Firmware
Not all full firmware images include a baseband update.
Baseband is the modem /BL
Build is the firmware, sometimes referred to as the ROM or system files.
You can find full firmware images all over this forum or on various other sites with a Google search. A quick look at this forum will tell you if the firmware image updates the baseband as people will be posting about that. Or look for the component parts here.
.
fffft said:
Not all full firmware images include a baseband update.
Baseband is the modem /BL
Build is the firmware, sometimes referred to as the ROM or system files.
You can find full firmware images all over this forum or on various other sites with a Google search. A quick look at this forum will tell you if the firmware image updates the baseband as people will be posting about that. Or look for the component parts here.
.
Click to expand...
Click to collapse
Thanks for the info. I have downloaded and flashed the firmware of b 3 and it will not change from nF6 no matter how many times I flash. I have tried Mobil Odin and regular Odin 3.09 also. Everything says the flash is successful too but it never changes. Only thing I haven't tried is the full stock tar from that page.
Anything you can think of?
Sent from my SM-G900T using JellyBombed Tapatalk 2
Josh McGrath said:
Thanks for the info. I have downloaded and flashed the firmware of b 3 and it will not change from nF6 no matter how many times I flash. I have tried Mobil Odin and regular Odin 3.09 also. Everything says the flash is successful too but it never changes. Only thing I haven't tried is the full stock tar from that page.
Anything you can think of?
Sent from my SM-G900T using JellyBombed Tapatalk 2
Click to expand...
Click to collapse
Have u tried pulling the battery?
Skyrocket2 said:
Have u tried pulling the battery?
Click to expand...
Click to collapse
I have tried doing that before and after and no change! It's driving me nuts. My moms phone is updated, stock, and voLTE works great and mine doesn't
Sent from my SM-G900T using JellyBombed Tapatalk 2
Josh McGrath said:
I have tried doing that before and after and no change! It's driving me nuts. My moms phone is updated, stock, and voLTE works great and mine doesn't
Sent from my SM-G900T using JellyBombed Tapatalk 2
Click to expand...
Click to collapse
Perhaps trying to flash the full stock tar.
Josh McGrath said:
Thanks for the info. I have downloaded and flashed the firmware of b 3 and it will not change from nF6 no matter how many times I flash. I have tried Mobil Odin and regular Odin 3.09 also. Everything says the flash is successful too but it never changes. Only thing I haven't tried is the full stock tar from that page.
Anything you can think of?
Sent from my SM-G900T using JellyBombed Tapatalk 2
Click to expand...
Click to collapse
when you flash the Flashable Firmware Only Tars file, it only update bootloaders, modems, if you want everything updated then u need to flash the Flashable Full Stock Tars.
koolboyztn said:
when you flash the Flashable Firmware Only Tars file, it only update bootloaders, modems, if you want everything updated then u need to flash the Flashable Full Stock Tars.
Click to expand...
Click to collapse
I did flash the full stock tar as your said and it did finally update. However, when I reinstalled the rom, project infinity latest release, it reverts back to nf6 a build number. Is that normal?
Sent from my SM-G900T using JellyBombed Tapatalk 2
Josh McGrath said:
I did flash the full stock tar as your said and it did finally update. However, when I reinstalled the rom, project infinity latest release, it reverts back to nf6 a build number. Is that normal?
Sent from my SM-G900T using JellyBombed Tapatalk 2
Click to expand...
Click to collapse
that's because the rom still has build NF6.
Josh McGrath said:
I did flash the full stock tar as your said and it did finally update. However, when I reinstalled the rom, project infinity latest release, it reverts back to nf6 a build number. Is that normal?
Sent from my SM-G900T using JellyBombed Tapatalk 2
Click to expand...
Click to collapse
yes because the tp version still on NF6 base thats why.
koolboyztn said:
yes because the tp version still on NF6 base thats why.
Click to expand...
Click to collapse
So would this affect volte? Modem is updated, base is not with this rom
Sent from my SM-G900T using JellyBombed Tapatalk 2
most peoples flash the stock tar file first then dirty flash tp over it and volte working fine.
koolboyztn said:
most peoples flash the stock tar file first then dirty flash tp over it and volte working fine.
Click to expand...
Click to collapse
Yup thats what i exactly did and it work.