ive been using my lg l9 for over a year and half now, the phone has undergone numerous softbricks,almost all available roms and recoveries, two nights ago i happened to throw my phone because of sme anger (personal reasons,LOL).the display was blown, but top right part of it was visible...so on the following boot ...i saw the wifi and network were on. the following morning i had a local repairman fix a new display on my phone. on the boot after that wifi bluetooth and network seemed to b not working..network did show up after a while though..n phone was able to turn on gprs and network..but the wifi and bluetooth were stuck on turning on...i was running beanstal 4.4 then..i reflashed it,tried another two roms.it was still the same.then, i plugged the phone to the B2C app..and turned on S/W upgrade mode...it seemed to bworking..the b2c app was downloading its rom via upgrade recovery option,..my phone was connected to the pc for about 45 mins...after which..i got an overheat warning.i unplugged the phone immediately,allowed it to cool...while the firmware was being downloaded on the pc...i reconnected my phone after cooling it for abt 5 mins...the phone turned on in S/W upgrae mode..but then as the software download in pc reached about 80-90%..the phone turned off..i tried connecting it again..the S/W mode shows up for a second...connects to my pc n then suddenly disconnects n my phone goes black...now it doesnt even do that..it just simply doesnt respond! ...but when i connect it my pc for b2c..thogh the phone does not show anything, the usb connection n disconnection tone keeps fluctuating on my pc..until i disconnect my phone!
Related
I have a problem with my x10i.
I was trying to use the flash tool for 2.1 from binary's thread but I failed and it was still 1.6. It got to the point where it said [finish] and then error message in the cmd. After that I tried using SEUS to update it again, the 2.1 update was available so I tried installing it.
Here is the current situation.
After installing 2.1 from SEUS, I followed the instruction to turn the phone off/take out the usb. After turning it back on, it's been half a hour and I'm still stuck at the blank screen before the SE logo shows up. I tried taking out the battery to boot into Flash Mode but that didn't work either. I was wondering if it was because the battery is near empty, but that's not the case since I was using the wallcharger for another hour on it earlier whlie it's in the blank screen state.
Can anyone point me in a direction for fixing it?
Forgot to mention, holding the power button doesn't turn it off either. I would have to remove the battery to turn it off.
Try a re-flash... use the repair function on PC Suite
the usb cable isnt turning on the phone by connecting to it while its off. i can't boot in flash mode either .
had somewhat a prob yesterday like it, my phone did turn on again. i got an other pc installed companion suite there and repaired the firmware(said it was up to date) and then after the boot i'am @ 2.1
was the other pc a 32bit? because the first time i tried using seus was on a 32bit then i bought 64 bit computer.
I'll try running it on a 32bit computer today.
Okay, so I borrowed a PC and installed PC Companion and tried to connect the phone to the computer. However the computer didn't recognize my phone at all. Perhaps this is a problem with window 7?
I also noticed that when i take the battery out and put the usb in then the battery back in, the green LED light stays on. It stays on until the phone trys to boot itself on then the LED turns off but the screen turns on. Only thing is that the screen is still blank and never went to any of the logo screens. And while the USB is plugged in, I can't turn it on by holding power. However if the usb is not plugged in, and I take the battery out and put it back in, I can hold power and it'll blink really fast for the green LED and then the phone viberates for a quick second (like it usually does when you turn your x10 on) and then blank screen and nothing else. The reason i can tell it's on w/ a blank screen and not a screen issue is because I put the phone under the table (very little light) and I can see the screen dimly lit by the back light. These are the only 2 indication I have that the hardware is working.
My biggest guess right now is that the firmware was F'D during the flash or the loader is now a goner since I can't boot into safemode or flashmode. My other conclusion so far is that while the phone is on (confirming it being on via the backlit blank screen) the usb connection goes off. Perhaps its stuck in a loop? Can anyone tell me how I can fix this?
I did searches as well.
I came across people who said their phone was stuck so they let it drain out the battery on it's own and it unstucks. Some say they waited 4-5 minutes and it worked.
So far the longest I waited was:
3 Hours(And counting) *usb & battery is plugged in but charging green LED light is not on*
or tried to leave it alone for 8 hours without battery or usb plugged in.
I'm hoping someone has come across the same problem and had a fix or one of the DEVS might've experianced this problem while trying to test their loaders/etc?
Nothing to do with Windows 7, I and others have no issues on Windows 7 x64. Run the attached file and delete anything to do with SE and try reconnecting in flash mode whilst running SEUS. Post a screen shot of the program if you're unsure what to delete.
Okay right now I am on the 2nd computer with the 32bit OS that I tried to connect to earlier. However i was unable to find a DEVID that was registered on Nov 1. which should be the case since I have never connected my phone with this computer ever before.
I was unsuccessful at booting into flash mode as well. I would put the battery in. then hold the back button and plug the usb. However the phone would not auto boot like it does normally when you plug in the usb so I held on till it did because I thought it might be lagging, however it still didnt boot into flash mode.
I have a baddddd feeling now
Did you read my post?
this is the screen shot of the program you told me to run. It was ran on the computer that I borrowed today, it was never connected with my phone before.
Thanks for helping me ^___^
skrod said:
Thanks for helping me ^___^
Click to expand...
Click to collapse
No worries, but you'll have to post a better screenshot than that, can hardly see it.
Sorry about that, this is my first time uploading a image on xda.
I re-uploaded via imageshack
http://img525.imageshack.us/img525/1355/find.png
Yeah as you've not connected it before there is nothing there to remove, and seems like you've already tried everything. Not sure what to suggest, are you on a contract with insurance?
Nope, I got my phone in USA before it came out in NA. I had it imported via a dealer.
I have a problem with turning my phone on.
The story begins last night were my phone charge was going to finish, in the morning i saw my phone is turned off and the i'll try to turn it on but it doesn't turn on. instead of that the picture of usb connection shows up
I connect the hone to PC and zune said the phone need to restore, then I restore my phone but the problem still remains....
I use wall plug and phone repeatedly turn off and turn on, after every turn on shows the image of usb connection...this operation happens every 4 - 5 minutes please help me
did u try hardreset phone?
eject battery?
Still Remins...
Yes...but the hard reset doesn't work... every time i want to startup the boot loader a message appear "Enter USB host mode..."
removing battery didn't give any answer
Hey,
I also have come across this problem and have tryed to connect to a computer and restore, battery removal, and tried to factory reset but phone just boots back to the... phone connect to usb screen
i have the same problem ... i bought a htc mozart 4 days ago , last night it turn off and won't turn on again untill now.... i change the battery and even the cable ... but it didn't change anything....
it gonna make me crazy...pleas help me........
Cool_skepticism said:
i have the same problem ... i bought a htc mozart 4 days ago , last night it turn off and won't turn on again untill now.... i change the battery and even the cable ... but it didn't change anything....
it gonna make me crazy...pleas help me........
Click to expand...
Click to collapse
Is yr screen showing the connect to pc picture?
Hi everybody, i'm facing a quite strange problem with a Meizu M5 Note. The phone has never been rooted and i've never attempted to flash custom Roms. I was using the phone normally, and suddenly the screen became grey, except for the status bar. I've restarted the phone and it returned to work. I used it a bit, then i locked the screen. When, after some minutes, i tried to unlock the screen, the phone was literally dead. It doesn't boot up at all (the screen remains black), so i can't access the recovery. By measuring the battery's voltage with a tester, it shows the right value (it was about the 60% or 70% when the phone "died"). I connected the phone to the computer and Windows detected it, i've also been able to install some drivers and now it's shown under the voice "Mediatek USB Port", but it continues to connect and disconnect from the pc. It seems like it's bricked, but there's no reason for it to be bricked. Has somebody got any ideas?
after change the screen,my meizu m5 note suddenly shut down and hard to boot,especially when i use data in it (wifi or cellular data).strangely,when it connected to charger,it appear quite normal.not suddenly shut down.anybody knows why is it?is there any problem on LCD or the battery?
Hi i purchased the phone in January the phone has been working fine no problems at all until last night. I was playing football manager which i imagine is quite a heavy game to play but something i do regularly and have no issue usually. i got a text so i switched to whatsapp and the phone crashed, so i did a hard reset holding the power button down and it booted backup but then crashed again immediate.
tired to do the hard reset again but it just went to a black screen and haven't been able to turn it back on again since.
so basically the phone is non responsive to anything i'm not getting a charging sign or any sort of sign the phone is working no vibrations sound nothing. the battery was on about 80% before it went of so pretty confident that's not dead.
things i've tried so far:
Hard reset holding down the power button
boot select holding down the power button and volume down button.
I've been trying to connect it to my laptop now this is a slight positive but where i've come up stuck, the laptop makes the sound as if its been connected then 5 seconds later it will disconnect then reconnect disconnect and so on.
I've changed the power setting for usb ports no change, i've tried holding down the power button on the phone as to reset it incase it stuck in boot mode or something but no change.
My next step is to take the back of the phone and remove the battery for 30 seconds or so. but with the phone still being under warranty i'm a
bit reluctant to do that plus i'm pretty confident its a software issue.
Update: after deciding to open it up i've disconnected the batter and the screen plugged it in and still getting the same connection/disconnection issue. it will connect then disconnect within 5 seconds max thne connect and disconnect. thought disconnection the battery may do the trick as i haven't tried to flash it or anything like that just gone wrong on it's own. I've now voided my warrenty but want to get this sorted anyone got any idea as to what could be causing the issue?
Thank you for taking the time to read it all and suggestions are appreciate thank you
Flash firmware
You can try to flash stock firmware with SP Flash Tool. Everything you shuld need is on their website.
czM1K3 said:
You can try to flash stock firmware with SP Flash Tool. Everything you shuld need is on their website.
Click to expand...
Click to collapse
Thanks for replying, that's what I've been trying to do but the phone won't stay connected to a pc. I connect to the pc and it will disconnect within 5 seconds then reconnect disconnect just constantly doing that. I thought Maybe if I unplug the battery it may get it out of that loop but even with the battery disconnected as soon I connect it to usb it still does the same loop. It hasn't got any lights or vibrations, to look at the phone it's non responsive thee only response I can get it the computer connecting and disconnecting constantly.
idontknow0112 said:
Thanks for replying, that's what I've been trying to do but the phone won't stay connected to a pc. I connect to the pc and it will disconnect within 5 seconds then reconnect disconnect just constantly doing that. I thought Maybe if I unplug the battery it may get it out of that loop but even with the battery disconnected as soon I connect it to usb it still does the same loop. It hasn't got any lights or vibrations, to look at the phone it's non responsive thee only response I can get it the computer connecting and disconnecting constantly.
Click to expand...
Click to collapse
That mean that, your phone is waiting for flash and when it don't get it it just restart and do the same think. It happended to me when i flashed wrong twrp. Just select firmware in sp-flash tool and click download. Than plug your phone into your pc and wait for next restart. If nothing happens you will have to download mediatek drivers.
(My english is really bad, i really sorry) Hello good evening. Excuse me, did you find any solution? Did you request a guarantee from UMIDIGI? What happens is that I was charging the phone and started watching YouTube, in an instant the phone went off and did not want to turn on definitively. It does not respond to my PC or the charger.
I clarify that the entry is good, I had 40% and I set about the task of looking for more problems of this style and I found two similar to mine, and yours would be the third problem that I see of this nature. Should I contact support and ask for a guarantee? I don't know what to do. Thanks.
Hi to all the XDA community,
It looks like that I am a new member but I have been for several year on XDA (but I lost all the log in details).
The problems I am facing is with a Samsung J6 that my mother in law gave me because one morning didn't show anything on the screen. These are the steps I did:
1. Screen is black, first thought lets charge it. I kept on the charger for ages. When I got back home I was sure that the phone is fully charged (it shows it on my usb hub). Tried to switch it on - Result, nothing is coming up to the screen
2. Hard reset by pressing power button and volume up or down - Result, nothing is coming up to the screen
3. Connect the phone on a laptop to check if the laptop recognises it. The laptop is doing the noise that something is connected and start installing drivers. Seconds later the device disconnected and connected again and this loop of connection and disconnection is happening for ever -Result nothing, only question marks.
4. Thought that is a hardware failure and since the screen doesn't shows anything I bought a new screen. I didn't by an OLED, I bough the cheap one. - Result, nothing is coming up to the new screen
5. I disconnected the battery and install the screen again connect the battery and try the same steps 1 & 2. - Results the same as the steps 1 & 2.
For me it looks like that the phone is bricked (I forgot to mention that my mother in law gave it to someone else before she pass the phone to me, no trust ) and the other guy probably tried to change the ROM or something similar. The boot loop that the phone is doing when I connected on my laptop is not normal (noise of connection and after 1sec noise of disconnection).
Additionally, I am not sure if the screen is working and I am on dilemma, do I have to return the screen to the seller of keep it until find out what is the problem with the phone. Maybe the screen is the faulty part that cause another issue. When I connect the phone on the laptop without the screen is doing the boot loop noise of connection/disconnection. I found out that when the phone is connected on the laptop and I press the power button the disconnection noise is delayed by couple more seconds.
Any help or guidance will be more than welcome.
Obtain the Stock image for your fone from samsung, load it into the version of Odin they suggest, but dont start it yet.
Disconnect fone from pc, and turn it off.
Start Odin flashing
plug fone in
Mb a few steps dif since I last flashed a samsung, but this will fix your fone.
Make sure you got the samsung driver installed in your pc
Pachacouti said:
Obtain the Stock image for your fone from samsung, load it into the version of Odin they suggest, but dont start it yet.
Disconnect fone from pc, and turn it off.
Start Odin flashing
plug fone in
Mb a few steps dif since I last flashed a samsung, but this will fix your fone.
Make sure you got the samsung driver installed in your pc
Click to expand...
Click to collapse
Thanks for your response.
Samsung drivers are already installed.
The problem that I am encountering is that I can put the phone on download mode. Firstly because I can't see anyhting on the screen and secondly because my laptops can see the device. I tried different cables too but nothing worked.
Since the phone cannot be recognised by the PC, the Odin app cannot see it either.