Related
Hi Guys,
Yesterday i installed Paranoid Android on my phone ( full wipe data and cahe ) and it started to reboot when making calls.
So i decided to install CM9 RC1 and got the same problem.
I reverted back to stock and now my phone is fine.
Someone has a clue of what's happening ?
I tried different kernels but got the same problem.
Your help is appriciated.
Greetings,
PTiT
Have you formatted /system and fixed permissions?
Inviato dal mio GT-I9100 con Tapatalk 2
PTiTDaV said:
Hi Guys,
Yesterday i installed Paranoid Android on my phone ( full wipe data and cahe ) and it started to reboot when making calls.
So i decided to install CM9 RC1 and got the same problem.
I reverted back to stock and now my phone is fine.
Someone has a clue of what's happening ?
I tried different kernels but got the same problem.
Your help is appriciated.
Greetings,
PTiT
Click to expand...
Click to collapse
If you are doing it through CWM
Try installing after wiping Dalvik cache available in advance.
PTiTDaV said:
Hi Guys,
Yesterday i installed Paranoid Android on my phone ( full wipe data and cahe ) and it started to reboot when making calls.
So i decided to install CM9 RC1 and got the same problem.
I reverted back to stock and now my phone is fine.
Someone has a clue of what's happening ?
I tried different kernels but got the same problem.
Your help is appriciated.
Greetings,
PTiT
Click to expand...
Click to collapse
hi.
Had same kind of issue. Random reboot/shutdown.
I installed 1.6 last night. With full wipe of everything I could find in my kernel to wipe.
then, install paranoid.
then install G-apps.
then WIPE cache again.
then fix permission.
as recommended in the official thread by the dev.
It solved my issue.
good luck.
Same problem here.
Any stock rom (including ICS) works well.
I tried installing paranoidandroid 1.6.
Factory reset
Wipe cache
Wipe dalvik
Install gapps and camerafix.
wipe cache.
Set phone dpi to 184
reboot
And basically, everytime i try to make a phone call, it looks like that the phone screen (the one that displays the contact picture and the close-call red button) is crashing.
I can hear 10 seconds of phone ringing/conversation and then the system reboots, showing me the boot animation.
The only way to fix this, so far, is by installing a stock rom
..probably I am missing something, but I cannot get it working.
I resolved mine by reverting to a GB stock rom and flashing the lastest nightly from there.
box2k2 said:
I resolved mine by reverting to a GB stock rom and flashing the lastest nightly from there.
Click to expand...
Click to collapse
So basically you Installed the latest CM9 nightlies rather then paranoidandroid ?
Hi All,
I have searched both here and on Google for an answer to this, but cant find anything clear.
I have flashed CM9.1 stable and got it set up just right, absolutely love this ROM so far!
As time goes on I am getting very tempted to give the CM10 nightly a go.
As i am going CM -> CM is it possible to flash CM10 as an update rather then wipe all my apps and settings and start over? or do I need to flash google apps, restore everything with titanium and spend an hour in settings again after installing CM10?
Thanks for your help
Normally if you are coming from the same rom then you dont need to do a full wipe.
A full wipe is a must if your going from 1 rom to a different rom.
I would suggest doing a backup just incase but i think it safe to say that you WILL NOT need do a full wipe as you are only updating the same rom.
It is always recommended to do a full wipe
- wipe/data factory reset
- wipe cache
- wipe dalvik cache
Install CM 10 nightly and Gapps and reboot.
Set back your apps etc. via titanium backup
Dav_prime said:
Hi All,
I have searched both here and on Google for an answer to this, but cant find anything clear.
I have flashed CM9.1 stable and got it set up just right, absolutely love this ROM so far!
As time goes on I am getting very tempted to give the CM10 nightly a go.
As i am going CM -> CM is it possible to flash CM10 as an update rather then wipe all my apps and settings and start over? or do I need to flash google apps, restore everything with titanium and spend an hour in settings again after installing CM10?
Thanks for your help
Click to expand...
Click to collapse
Since your going from ICS to JB, Full wipe is absolutely required. Different android versions after all.
"Unfortunately Setup Wizard has stopped working" - after trying to install Gapps
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
RostokMcSpoons said:
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
Click to expand...
Click to collapse
What version of CyanogenMod are we talking about here? You need to be more specific.
themadba said:
What version of CyanogenMod are we talking about here? You need to be more specific.
Click to expand...
Click to collapse
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
RostokMcSpoons said:
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
Click to expand...
Click to collapse
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
themadba said:
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
Click to expand...
Click to collapse
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Edit: Damn, I couldn't get to sleep without fixing it first, and luckily I did: I rebooted my pc, and the explorer eventually did show the contents ok (just very slowly). I dragged the zip in, installed it with CWM and *huzzah* it's working! The only odd thing is the camera has disappeared from the applications...
I can wait until tomorrow to work that out.
Thanks for your help
RostokMcSpoons said:
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Click to expand...
Click to collapse
That's strange. I recently flashed a wrong gapps file and it led to some things not working, especially the Play Store. I tried just wiping the cache and dalvik cache and flashing, but that didn't work. So I did a wipe data/factory reset, wipe cache and wipe dalvik cache, reflashed the ROM and then flashed gapps. I think I may have wiped the cache and dalvik cache once more for good luck, and then repaired permissions in the advanced section of recovery. Phone booted up fine and all apps worked perfectly. I doubt the phone is knackered, perhaps try and different ROM just to make sure it boots fine, and then try flash CM10.1 again. Good luck
Samsung Galaxy s2 CM10 trouble Setup Wizard has stopped working
Im from Asia and I guess Samsung s2 int’l version has different features. I already updated my firmware to JB 4.1.2 (leaked) and since I am not satisfied with it,I rooted it and installed siyah as well as cm10 + gapps from XDA links. I followed everything according to the posts and vids.The problem is that after rebooting and CM start up showed up,the next prompt was UNFORTUNATELY,SET UP WIZARD HAS STOPPED WORKING. What’s wrong? I have tried 6x times and no one worked correctly. HELP me!
I was under the same problem few days ago...
flashed 4.2.2 gapps on 4.1.2..
and succumbed to 'unfortunately setup wizard has stopped' error, until i flashed the respective 4.2.2 gapps.
but sadly it ate away my internal memory (cant help )
So the point is
just flash the respective gapps
and then the ROM again
Hi I just installed cyangenmod and it works but setup wizard is crashing and I don't know how to fix this my phone its pretty much unusable. Need help urgently!
The key is to wipe regular cache partition after installing Gapp zip! :]
I think you have the key. I get my cm10.1.5 and I flashed a realy slim gapps (11mb), but after that I didn't wipe cache and dalvik. So the phone didn't woke up because it get stucked in the wizzard setup. So I have to do as u said. And like the other said, reinstall the rom and then the gapps.
Galaxy 5
After using android 2.1 update 1 in my samsung galaxy 5 (GT-I5503)
I updated it with 2.2 froyo then 2.3 then 4.0 then 4.1.
last time I updated to 4.2 CyanogenMod
Before that I could work good in others. But in 4.2 there were problem of contacts in SIM card, these contacts not showing in device.
Then after my device not detacting SIM card for last few months.
Now my phone showing "Unfortunately, Setup Wizard has stopped."
How can I start my phone?
Galaxy Grand CM12 error
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
fixed this error(setup wizard or google play service has stoped).first you must install cm13 after that install your gapps(use phliz toch recovery) then reboot device.you Will notic that device doesn't boot or you'll have the same problem(setup wizard).come back to recovery and install the other recovery(change phliz touch to CWM) then with wipe install the same ROM and after that install gapps.the gapps won't install so reboot the device.enjoy your ROM with gapps
fix
FOR ANY1 facing this problem on cm13 setup wizard stopped.
just do as i say it's actually funny but it worked for me for the very 1st time.
I tried all the fix given like clear cache or flash new gapps but nothing solved the problem.
So just do what i say.
when u see the setup wizard stopped error.
on that screen just touch all the corner of the screen of ur phone
staring from the top left corner then the top right and so to the bottom right corner and then at last the left most corner.
Just keep trying i doesn't happen for the first time.
Most of u would be thinking it's funny but it actually worked just give it a try.
it helped me might work for u as well
---------- Post added at 07:49 PM ---------- Previous post was at 07:43 PM ----------
dkarry said:
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
Click to expand...
Click to collapse
bro just start your phone and on the screen where u see the error
leave it as it is and do this:
touch the top most left corner twice like tapping on it nad then the right most corner then the right bottom corner then lastly the left most corner.
it helped me might help u as well
sir,
i have samsung galaxy star GT-S5282 model but i am unabble to start the Device because of error of unfortunately samsung setup wizard has stoppeed
Hey guys, I tried switching to ART from dalvik today but unfortunately as soon as it finished booting I cant get past the lockscreen as it keep FCing each time I try to unlock the device. I tried rebooting , tried going to recovery and wiping cache and dalvik, and still the same. How can I fix this or how can I atleast return back to dalvik ?? because I cant even use the phone now.. Please help its urgent
im on the latest carbon rom nightly 4.4.3 and boeffla kernel Omni version beta 6.
Using nova launcher if this matters.
ayoubij said:
Hey guys, I tried switching to ART from dalvik today but unfortunately as soon as it finished booting I cant get past the lockscreen as it keep FCing each time I try to unlock the device. I tried rebooting , tried going to recovery and wiping cache and dalvik, and still the same. How can I fix this or how can I atleast return back to dalvik ?? because I cant even use the phone now.. Please help its urgent
im on the latest carbon rom nightly 4.4.3 and boeffla kernel Omni version beta 6.
Using nova launcher if this matters.
Click to expand...
Click to collapse
Restore your backup from within recovery.
Sent from my GT-I9300
Some of the custom roms just are not compatible with the ART. Restoring from a backup, or in the worst case do a clean/wipe install might be the only solution...
Hi;
So i recently installed CyanogenMod 13.0 on to my Samsung S4 GT-I9505 using the first download link on:
https://download.cyanogenmod.org/?device=jfltexx --> cm-13.0-20160102-NIGHTLY-jfltexx.zip
That all installed fine, but i wanted to get the Google apps installed aswell, which is where i am having some issues.
I have been trying to install the following package:
http://opengapps.org/?api=6.0&variant=nano
but have also tried to install quite a few others as well, and all have exactly the same issue. Basically after the apps have been installed and i boot the device up, i get various error messages like:
unfortunately, Setup Wizard has stopped
unfortunately, google play services has stopped
Any help on fixing this would be much appreciated, as nothing seems to download from the play store thats included in Cyanogen, they just say "your download will begin shortly" but never does.
Thanks in advance
I am a total noob, but I had exactly this problem. The issue appears to be that you have to flash gapps *before* rebooting after flashing CM. In my case since I had already flashed CM before I flashed gapps I had to put the gapps file on the phone (I did this by push with adb, you might find an easier way), re-flash CM, wipe cache/dalvik, flash gapps, wipe cache/dalvik, reboot. It worked.
The easiest guide I found was on androiding.how, called "how to install cm13 (cyanogenmod13)." (The forum won't let me post a link, just google it, it should come up).
Hope that helps. I'm on a galaxy s5 and used twrp recovery if that matters.
audacityandrouge said:
I am a total noob, but I had exactly this problem. The issue appears to be that you have to flash gapps *before* rebooting after flashing CM. In my case since I had already flashed CM before I flashed gapps I had to put the gapps file on the phone (I did this by push with adb, you might find an easier way), re-flash CM, wipe cache/dalvik, flash gapps, wipe cache/dalvik, reboot. It worked.
The easiest guide I found was on androiding.how, called "how to install cm13 (cyanogenmod13)." (The forum won't let me post a link, just google it, it should come up).
Hope that helps. I'm on a galaxy s5 and used twrp recovery if that matters.
Click to expand...
Click to collapse
Thanks for the reply, i gave that a try and it seems to be stuck on a loop now with "installing app # of 22" . it completes the installation and then reboots, after about 5 minutes on the Cyanogen boot screen, it goes back to installing apps again.
Hm, did you do a factory reset in your recovery before re-flashing CM and gapps? If not, that might be necessary.
audacityandrouge said:
Hm, did you do a factory reset in your recovery before re-flashing CM and gapps? If not, that might be necessary.
Click to expand...
Click to collapse
Yeah, i did. Tried it multiple times now
That's about the limit of my ability right there, hopefully someone with more experience than me can point you in the right direction. Good luck.
Boot to recovery (preferably TWRP)
Wipe cache / dalvik cache / data / system
Flash CM13 and the gapps you were trying first
Reboot
Profit!
Since you keep flashing different gapps on top of the system, this is probably causing some issues. Once you fully wipe and reflash everything, it should work.
es0tericcha0s said:
Boot to recovery (preferably TWRP)
Wipe cache / dalvik cache / data / system
Flash CM13 and the gapps you were trying first
Reboot
Profit!
Since you keep flashing different gapps on top of the system, this is probably causing some issues. Once you fully wipe and reflash everything, it should work.
Click to expand...
Click to collapse
Ive tried that multiple times using twrp (i always wipe everything before i flash CM13 and gapps), i still get the exact same issue. The second the phone boots, i get all these "unfortunately ******** has stopped".
Perhaps try installing 12.1 with gapps, get it all updated then upgrade to 13. I did the accidental upgrade to 13 but have had no issues whatsoever.