Hi I kinda have a problem with my tablet it keeps booting in to the Android system recovery and when I try to apply a firmware from the Archos site that I put in the external storage the installation keeps aborting half way and I have no idea what to do any more so can anybody help me here on how to get android to work again because so far nothing is working for me.
Really desperate so please any tips that could help are really appreciated!
still same problem anybody with any tricks or tips to get this to work?
I really can't seem to find any information on this problem for this tablet.
Have you tried with SD-card? You can also try to debug your problem through USB / UART.
Also, do you have SDE menu installed?
Related
Dear ALL
I have bought an Omega OT107 tablet
It seems that there is not much information onthis tablet on the net.
The only thing i know about it, is that it has Rockchip chipset ,(rk29sdk)
I want to get the rom of the tablet onto my PC (ubuntu)
When i reboot th device into the recovery, it boots , but i see an android with a ! mark on it
Then i cannot do anything
I hope someone can help me
thanks a lot
sz_gergo
PS: ADMIN PLZ delete this message as i think it does not belong here
THX
Hi there! I need someone help because, i'm really lost. :X
I have one primux bora 7 with ICS 4.0.3 and i want to install the CM9 ROM.
I see in this forum and i download this files that see in this picture:
img231.imageshack.us/img231/1876/pict3012.jpg
After this i install the CM9 nightly and appears in me screen this:
img37.imageshack.us/img37/7249/pict3013.jpg
Until this it's ok.
Then, when i install compatibility mode and/or gapps, appears on my screen this: (and even with only .zip files in the external sd card appears that)
img22.imageshack.us/img22/7228/pict3015i.jpg
Then i reboot the device, and it enter on a boot loop mode, that i can't do anything. Even the tablet it's not recognizes in windows mode (usb drivers didn't work). Touchscreen didn't work to. I'm desperate to fix this. My question is:
Can anyone give me some help, that can permit me to install CM9 in this tablet. I need noob tutorials. I don't understanding nothing of this, and i appreciate some patient from user here. please!
Can anyone help me with this?
Best regards in advance!
Hello,
I'm new to flashing and installing ROM on android phones.
I enabled root in this phone.
I wanted to install JellyBean 4.2.2.
After a long search on the internet and a lot of trying I decided to open a thread here.
My phone is Star N800 MTK6575 with Android 4.0.4.
When I tried to install ROM through recovery mode it showed me this:
"Failed to verify whole-file signature"
I tried to install ClockWorkMode Recovery without success
SP flash tool and Odin also disappointed me..
Could anyone help me please?
Maybe I did something wrong, can you please explain me step by step how to upgrade this phone?
Please help me, every answer will be appreciated.
Thank you!
P.S
I think I found the problem.
When I plug in my phone in the usb, when it's turn off and without the battery, I see it in the Device Manager appearing and then disconnecting.
I tried to change the Power Settings but it didn't help. Anyone faced this problem in the past and knows how to fix it?
HELP ME PLEASE :crying:
Hi everyone!
I have a problem with the netbook android NORDMENDE that freezes after boot.
I tried to press all sort of key to access boot menu in order to do something.
I also tried to install android and linux with sd and usb but it won't start.
Can someone help to understand what can i do to unfreeze this Android netbook?
It's android 4.0.
If i missing some useful information, please just tell me,
Thanks!
Obscures said:
Hi everyone!
I have a problem with the netbook android NORDMENDE that freezes after boot.
I tried to press all sort of key to access boot menu in order to do something.
I also tried to install android and linux with sd and usb but it won't start.
Can someone help to understand what can i do to unfreeze this Android netbook?
It's android 4.0.
If i missing some useful information, please just tell me,
Thanks!
Click to expand...
Click to collapse
Same here, have you solved that problem?
LEARNPAD TABLET HELP NEEDED PLEASE
LEARNPAD LPQ-497W
Has learnpad software on it & I would like to remove this & just use it as a standard android tablet.
Assume it is rooted to run the learnpad software.
Sadly I have not been able to enter recovery mode to reset it. Have tried everything I can think of.
Tablet has no volume up or down buttons
Have tried everything & am running out of ideas.
Somebody must have encountered this issue before.
Any ideas or help would be much appreciated
Kindest regards
Try this
menote4man said:
LEARNPAD TABLET HELP NEEDED PLEASE
LEARNPAD LPQ-497W
Has learnpad software on it & I would like to remove this & just use it as a standard android tablet.
Assume it is rooted to run the learnpad software.
Sadly I have not been able to enter recovery mode to reset it. Have tried everything I can think of.
Tablet has no volume up or down buttons
Have tried everything & am running out of ideas.
Somebody must have encountered this issue before.
Any ideas or help would be much appreciated
Kindest regards
Click to expand...
Click to collapse
Hi there,
I just finshed reading the info about the tablet since they are using their own version of android it maybe impossible to get the exact rom however you can unlock the tablet to access restricted features.
And no the tablet is not rooted.
try this website about unlocking the tablet : https://support.learnpad.com/portal/kb/articles/locking-and-unlocking-learnpad
try this website to root your tablet it may or may not work : www.kingoapp.com
Hi there. Thank you for replying.
I cannot unlock the tablet as per your link because to do this you need the original owners login details.
I am a second user.
Tablet seems to be really locked down. Cannot even access the recovery mode which is probably what I need to do.
Seems such a waste of good hardware to maybe have to bin this tablet just because basic android cannot be installed on it.
Really appreciate your help & advice. Many thanks.
Please help
i also have this learn pad . but my problem is the learnpad is stuck on start. this learnpad not have android os . its have Ubuntu OS and it work with 12V battery. my problem is to install a new and fresh Ubuntu OS , but how can i boot this device from usb. if someone know please help me. thanks in advance.
Same problem but with lpq-397. Bootloop.