LG l9 p760 with wrong rom - LG Optimus L9 P760, P765, P768, P769

hello,
i have tried to flash my phone with new rom. Downloaded plenty of p760 roms, and all didint work, phone said that install aborted and this device is p960(prada) so i installed prada rom on it. It loads and going load, but stil wrong rom and dont work. Now i want to install correct rom, but its impossible. i have tried everything.
Bootloader is unlocked.
the biggest problem is that pc dont find my phone and driver is wrong, i have installed all latest drivers and done everything but still nothing. i hope someone help me here, because imout of ideas.

Hi, you could try installing from recovery CM9 by Polloos.
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted

Related

[GUIDE][P768] Bootloader Unlock Method

the variant of p768 can have unlocked bootloader by using AREMCEE's method of unlocking bootloder. Keep in mind while on Jellybean official rom your camera will not work as this is the only hardware difference. thanks to thomasoeli for inadvertently being the guniea pig for this method.
To unlock bootloader use method here .it will work with p768.
1.First use the guide to flash jellyben onto your devices
http://forum.xda-developers.com/showthread.php?t=2085344
2.use this method to unlock your bootloader.
http://forum.xda-developers.com/showthread.php?t=2189646
3. use ths guide to KDZ flash back to ics with unlocked bootloader :victory:.
http://forum.xda-developers.com/showthread.php?t=2085344
Virusbetax said:
the variant of p768 can have unlocked bootloader by using AREMCEE's method of unlocking bootloder. Keep in mind while on Jellybean official rom your camera will not work as this is the only hardware difference. thanks to thomasoeli for inadvertently being the guniea pig for this method.
To unlock bootloader use method here .it will work with p768.
1.First use the guide to flash jellyben onto your devices
http://forum.xda-developers.com/showthread.php?t=2085344
2.use this method to unlock your bootloader.
http://forum.xda-developers.com/showthread.php?t=2189646
3. use ths guide to KDZ flash back to ics with unlocked bootloader :victory:.
http://forum.xda-developers.com/showthread.php?t=2085344
Click to expand...
Click to collapse
Luckily, P768 users can recover Camera Issue as per his post. .
Just put a warning in your OP as "Do at your own Risk" to be at safer side.
zzz! i think no need unlock ics , wait for jelly bean
We don't need to wait 30 minutes ?
Can this unlock be used to test out the CM10 builds on the P768?
i'm just wondering choosing which JB Rom to flash on P768 @[email protected]
great idea for unlocking the bootloader.
now the only thing we need is someone to port p768 camera files/libs to p760 roms.
who will be that kind?
alifa said:
great idea for unlocking the bootloader.
now the only thing we need is someone to port p768 camera files/libs to p760 roms.
who will be that kind?
Click to expand...
Click to collapse
Yes,it will be SWEET if someone could port p768 camera files/libs, HOPE comes soon!
Okay, Ive followed all of the guide and it worked. The only issue is that I left my WIFI running before I did it all, so when JB booted up, the phone updated all the apps to JB versions, after flashing back to ICS, the phone refused to boot, so I did a hard reset and then everything was fine. Bootloader unlocked. For some reason after doing all this, when I connect the phone to the PC, it says its a LG-P760 after flashing back to my 768 V10E rom?
I think you should add into the guide that you should turn off all data to avoid auto updates (if enabled)
donk165 said:
Okay, Ive followed all of the guide and it worked. The only issue is that I left my WIFI running before I did it all, so when JB booted up, the phone updated all the apps to JB versions, after flashing back to ICS, the phone refused to boot, so I did a hard reset and then everything was fine. Bootloader unlocked. For some reason after doing all this, when I connect the phone to the PC, it says its a LG-P760 after flashing back to my 768 V10E rom?
I think you should add into the guide that you should turn off all data to avoid auto updates (if enabled)
Click to expand...
Click to collapse
I see you in four to five different threads doing various things at the same time, and I have replied you in most of them also.
I am sure you are gonna mess it pretty hard and make one fully bricked phone. May be you will be the first one to enter in "hall of fame" :laugh: kidding. this phone is unbrickable but that does not mean you should deliberately try bricking it. he he he
Haha, this is true. I've been doing a lot of things because I really wanted Jelly Bean, and I was trying to get every feature jelly bean offered in case they didn't release the P768 JB update. Now they have released it, I'll stop now and enjoy a relatively stock experience (apart from root + cwm). I also really enjoy doing things to the phone, getting more features out of it etc. It gives me a little buzz
I think I may have already done some things I shouldn't have. The phone has 3 different model names now. Under most it is still the p768. When I connect to the pc, it is a p760, and in some apps, it is a U2. It still works fine though.I'm going to fully flush everything out and start again. And I'm only ever flashing 768 KDZs/ROMs now.
Hopefully I won't be entering any halls of fame for the first bricked L9
Sent from my LG-P768
donk165 said:
Haha, this is true. I've been doing a lot of things because I really wanted Jelly Bean, and I was trying to get every feature jelly bean offered in case they didn't release the P768 JB update. Now they have released it, I'll stop now and enjoy a relatively stock experience (apart from root + cwm). I also really enjoy doing things to the phone, getting more features out of it etc. It gives me a little buzz
I think I may have already done some things I shouldn't have. The phone has 3 different model names now. Under most it is still the p768. When I connect to the pc, it is a p760, and in some apps, it is a U2. It still works fine though.I'm going to fully flush everything out and start again. And I'm only ever flashing 768 KDZs/ROMs now.
Hopefully I won't be entering any halls of fame for the first bricked L9
Sent from my LG-P768
Click to expand...
Click to collapse
finally P768 JB is out. you may flash it and unlock bootloader and root process with this .
My phone reboots normally when i enter adb oem-unlock
Even entering the command through terminal emulator on the phone does the same
Any help?
dhruvbatra205 said:
My phone reboots normally when i enter adb oem-unlock
Even entering the command through terminal emulator on the phone does the same
Any help?
Click to expand...
Click to collapse
try adb thru pc (cmd)
LG fastboot for P768
My understanding is that the LG P768 variant, unlike the P760, does not have LG fastboot in rom. Hence the need to flash the P760 rom to the P768 phones to access LG fastboot, unlock the bootloader, and then re flash a LG P768 rom.
Nevertheless, many have managed to root the P768 and have installed CWM.
My question is whether it is possible to use CWM to flash LG fastboot on a rooted P768?
dm146 said:
My understanding is that the LG P768 variant, unlike the P760, does not have LG fastboot in rom. Hence the need to flash the P760 rom to the P768 phones to access LG fastboot, unlock the bootloader, and then re flash a LG P768 rom.
Nevertheless, many have managed to root the P768 and have installed CWM.
My question is whether it is possible to use CWM to flash LG fastboot on a rooted P768?
Click to expand...
Click to collapse
does anyone know if this is possible?
Swag-Mo said:
does anyone know if this is possible?
Click to expand...
Click to collapse
From what I understand, its not something which is flashable. I'm pretty sure its deeper in the phone. Lelus said it didnt work like that. The fastboot mode is just not accessable/present on P768's it seems.

[Q] Flashing Stock Rom from CM10.1 Nightly

I've installed the cm 10.1 nightly version, because of many reasons, but now I've been trying for hours on end to get back to the original stock rom, but no luck. I tried the guide posted by Cmahendra, but I can't install it because I already have cm 10.1 which is jb of course. The workaround doesnt work because of it. I have to enable the LG software mode on cm 10.1 but I've no idea how to do that. Everything else before that was going butter smooth.
Does anybody know how to enable it and install the stock rom from cm 10.1?
Why didnt you backup? Its so easy ._:
Now think you have to use kdz with SW Upgrade Mode, and if it doesnt work try with lg mobile support tool
I have this problem yesterday, even with original Lg software cant get stock rom back, the solution i made is so simple if you have CWM and unlocked bootloader, download a rom backup from this thread
http://forum.xda-developers.com/showthread.php?t=2136204
And restore via CWM, its the only way work for me,
Good luck
Sent from my LG-P760 using xda premium
Roker1 said:
Why didnt you backup? Its so easy ._:
Now think you have to use kdz with SW Upgrade Mode, and if it doesnt work try with lg mobile support tool
Click to expand...
Click to collapse
I made the nandroid backup, but it had the md5 file error... I got unpatient with it and deleted it before I found out how to fix it. Silly me
The kdz and sw tool both didnt work, so I just downloaded a backup since I already have cwm and unlocked bootloader, and I know how to bypass the md5 file problem if it occurs again.
Copying the backup to the sd card right now Fingers crossed.
Yeeeaaahh it worked like a charm, finally I have my old l9 back

[Q] Locked bootloader, no working system but CWR

Hello guys, I'm knee deep in ****.
I recently got tired with my E10i, so I decided that it needed a better ROM and kernel. So I went ahead and rooted it and unlocked the bootloader, atleast I thought that, and installed Clockworkmods recovery since I'm familiar with how it works from my Nexus 7 which I have flashed countless times.
Since I've done this before I didn't think that anything would go wrong. That was until I found it a bit weird that I got error 7 on everything I tried to flash. So I fooled around with the recovery thinking that it was just a simple fix I needed to execute.
I then found out that I wasn't able to boot into the official firmware which makes me unable to unlock the bootloader, I think.
Flashtool isn't able to flash anything either and reports that my bootloader is indeed locked.
Please give me some suggestions or solutions to how I can make my E10i flashable again.
Thanks in advance guys!

[Q] stuck with no 4g and touch screen screwed up what now!!!

did the dumb unlock boot loader for the lg optimus l9 769 and now my phones all screwed up i did everything just like it said
now ive been seaching everywhere and cant find what i need i want to go back to the way it was when i first got it and the lg kdz flash thing doesnt work and it keeps telling me my battery is low when its not i need everything the bin file for tmobile usa and the kdz i cant get links to anything. my phone touch screen is all screwed up and i cant install cwm it wont let me i need help bad.. idk what to do any more. also got no 4g
andrew09 said:
did the dumb unlock boot loader for the lg optimus l9 769 and now my phones all screwed up i did everything just like it said
now ive been seaching everywhere and cant find what i need i want to go back to the way it was when i first got it and the lg kdz flash thing doesnt work and it keeps telling me my battery is low when its not i need everything the bin file for tmobile usa and the kdz i cant get links to anything. my phone touch screen is all screwed up and i cant install cwm it wont let me i need help bad.. idk what to do any more. also got no 4g
Click to expand...
Click to collapse
You have to let your battery drain some to get the offline flash working. The best thing to do is get back into the bootloader (fastboot) and install the omap4430 driver.
Issue the same command you used to unlock
adb reboot oem-unlock
Look for lelus fastboot thread.
Flash the non touch cwm for p769. You can find everything you need in carloswii5 thread on unlocking bootloader. Look at my post in that thread. And look for lelus touch screen fix. While you are at it, flash a custom ROM.

[Q] CUBOT ONE MT6589T - Jan 6 Kernel - Soft Bricked - HELP NEEDED!

Greetings fellow XDA Users,
Let me get right to the point. A week ago my Cubot One arrived which I ordered from dealxtreme. Eveything was fine and I was very happy with the phone.
But 3 days ago I tried to change the resolution of the screen with an app from the Play Store and of course I did not backup my rom a really stupid thing to do on my part.
Now my Cubot One is soft bricked I think as it only boots to the android logo and that's it. I can still access the recovery menu but unfortunately I only have the stock recovery.
I have tried like literaly everything to unbrick my phone but nothing has worked so far. I tried to use the Cubot One T card upgrade and install it from an SD card but it fails with an MBR related error I think. I have tried to flash an older ROM I think V0.3 throught SP Flash Tools. I tried to only flash the CWM recovery through SP Flash tools again but that didn't work either. I tried to install custom roms through the ADB sideload ability of the stock recovery but nothing seems to work.
Is there any way I can repair my phone? Is it possible for someone that has recently baught a Cubot One running the V0.7 rom to do a backup and send it to me and instruct me how to install it? I would really appreciate any help.
I just want you to know that I am opening this thread as a last resort I have tried everything I have even tried the MTK Tools software but It doesn't recognize my phone possibly because It doesn't boot or I have lost the root and usb debugging previleges.
Can someone please give me a backup of the V0.7 ROM? I think that that is my last chance to save the phone.
Thanks in Advance.
VagProt said:
Greetings fellow XDA Users,
Let me get right to the point. A week ago my Cubot One arrived which I ordered from dealxtreme. Eveything was fine and I was very happy with the phone.
But 3 days ago I tried to change the resolution of the screen with an app from the Play Store and of course I did not backup my rom a really stupid thing to do on my part.
Now my Cubot One is soft bricked I think as it only boots to the android logo and that's it. I can still access the recovery menu but unfortunately I only have the stock recovery.
I have tried like literaly everything to unbrick my phone but nothing has worked so far. I tried to use the Cubot One T card upgrade and install it from an SD card but it fails with an MBR related error I think. I have tried to flash an older ROM I think V0.3 throught SP Flash Tools. I tried to only flash the CWM recovery through SP Flash tools again but that didn't work either. I tried to install custom roms through the ADB sideload ability of the stock recovery but nothing seems to work.
Is there any way I can repair my phone? Is it possible for someone that has recently baught a Cubot One running the V0.7 rom to do a backup and send it to me and instruct me how to install it? I would really appreciate any help.
I just want you to know that I am opening this thread as a last resort I have tried everything I have even tried the MTK Tools software but It doesn't recognize my phone possibly because It doesn't boot or I have lost the root and usb debugging previleges.
Can someone please give me a backup of the V0.7 ROM? I think that that is my last chance to save the phone.
Thanks in Advance.
Click to expand...
Click to collapse
I really don't want to spam but I really need some help the phone is brand new I can't just leave it like this. Thanks!
No help at all? Nice community... I am just supposed to throw the phone away.
Did you tried this rom?
Hello, i found this firmware in needrom page.
Check it!
www_needrom_com/mobile/cubot-one-turbo/
change _ with .

Categories

Resources