I want to root my Samsung Galaxy GRAND PRIME.
(Actually I searched the forum for rooting for Prime, but couldnt find any details for Build KTU84P.G530HXXU1ANL3, some threads are available but for different built.)
Primary reason for rooting being .. that I am not able to run games from my microSD card. (obb files in SD Card).
after a little bit of Google .. I got to understand... its because Android 4.4.4 have some security base issue for extStorage which does not allow.
Model No: Samsung Galaxy Grand Prime - SM-G530H
Android Ver: 4.4.4
Baseband Version: G530HDDU1ANL1
Build number: KTU84P.G530HXXU1ANL3
Regards,
AliveHunter
Root For SM-G530H
Attention i am not response any damage,brick or soft-brick event.
This does however trigger the Knox Counter which means you lose your warranty...
Step 1: If you dont have, download Samsung USB Drivers on your pc.
Step 2:If you dont have, download odin for pc. Sorry i cant post link for now.But you can find it.
Step 3ownload Root Files.Sorry i cant post links for now .But if you search for cf auto root you can see chanfires web-site and you can find your model number and download the file.Attention Use SM-G530H
Step 4pen and un-zip Odin File
Step 5:Un-zip Root files
Step 6pen the odin and click AP button and select root file...
Step 7:And click start for installition
Step 8:When installition finish your device boot on recovers automaticly and do every think automatic....
Step 9:Your device can boot up 2-3 times
Step 10:When your device booted , superuser is there..Good uses....
Thanks @Chainfire for auto root files and guides
I think it will help you
I see this post now but you posted it too before but its answered
See you later....:laugh:
Related
Its been couple of months I am trying to root my Galaxy S2 I9100G which was bought from China. I made deep research on XDA Forum to find any easy method! Several threads out there. At first I tried to follow this thread
The above thread founded helpful for maximum users with any problem. I tried by the provided steps with their "Superatmos (version 2.1 is very stable and recommended)" Kernel.....And it worked...rooted...but vibration function was disable (other users also had this type of problem). Then tried also to check hardware of my phone and everything was fine..I was keep looking for solution and someone on that thread said to "Flash Again With Original Stock Kernel". Well then I flashed again with INDIAN Stock Kernel...........and the result------ my phone was not booting up, only the Yellow Triangle was showing with Samsung Logo. I was just to pull my hairs when I found that many other people had this type of problem and the reason is HARD BRICKED..!!!!
Luckily my phone was restarted in download mode, and then I flashed again with "Superatmos_v3.0_XXLA1" Kernel. and voila! it restarted, booted, rooted and vibration was working again....!
Please note- Binary counter / Yellow Triangle will show. please check this pdf file by the thread-owner --http://db.tt/BwlUTGIl
The only reason for sharing my details above by thinking, its possible that other users may have this kinda problem. so this thread would be make them to relax a little bit. Now below I am repeating the steps for Rooting a Chinese Galaxy S2 I9100G with links. (Followed to Paras Lehana's original thread http://forum.xda-developers.com/showthread.php?t=1570377)
1) Download Odin and install -- View attachment Odin3-v1.85.zip
2) Download this Superatmos Kernel file -- View attachment superatmos_v3.0_XXLA1.tar Believe me it will work any problem. You may try other version, but I Superatmos ver 2.1 which is recommended most wont work...anymore.
3) Go to Download Mode : Turn off phone. Hold vol down+home+turn on button. Release the on button after phone is turning on. After a few second, release all buttons. After that vol up.
4) Run Odin, connect phone with usb cable, yellow COMx will be shown in Odin. (Re-partition should not be ticked (no pit file is required here)
5) Select PDA button, choose the downloaded kernel file (usually a .tar file)
6) Click Start, a PASS will be shown if succeed.
That's it. you are rooted. please check other guidance for CWM Recovery / Super User / Remove Triangle / Binary Counter etc. on the thread-owner's pdf file.
Note: Users who don't wanna flash their Chinese ROM with any other but still wanna access Google/Play etc. they could follow above steps. And after rooting please follow this thread --- http://forum.xda-developers.com/showthread.php?p=29464673
Also users may follow below steps for replacing their Chinese ROM to Any Other.(After ROOT)
This method requirement is root access and Mobile Odin Pro only. Even if the phone are rooted with doomlord’s method and you chose not to have CWM support, it will work too
1) Download the stock firmware and copy it to the root of sdcard (internal). “tar” and “tar.md5”will be supported also.
please check on Sammobile for stock frimwares.
2) Install Mobile Odin Pro
you could search on google for Mobile Odin Pro to get shared pro version file.
3) Run the application and from “Open file …” select file that you just copied into the phone
4) If Everroot option is not ticked itself, please tick it if you want the phone to be automatically rooted during the process
5) I will recommend to tick all three options inside Everroot
6) And also please ticked the wipe data option but it is optional, but can reduce any bugs
7) Start the flashing
8) Result : root access, no CWM support, no busybox
Followed the original post----http://forum.xda-developers.com/showthread.php?t=1570377
I just wanted to associate together all required steps posted on XDA by some real professionals. So it will be easier for those people who is still searching on for Rooing Methods for Chinese Galaxy S2 I9100G.
Thanks
tried it, but couldn't get it to work
Thanks for that.
I have an SGS2
Model number GT-9100G
Android version 4.04
Baseband version I9100GZCLPL
Kernel version 3.0.8-1067026
Build number IMM76D.ZCLPL
On download screen
PRODUCT NAME: GT-i9100G_CHN_CHN
*#1234# gives
PDA: I9100GZCLPL
PHONE: I9100GZCLPL
CSC: I9100GOZHLPL
Build Info: Fri Oct 5 14:28:15 KST 2012
I tried flashing with the 3.0 XXLA1 tar as above and when the phone reboots it gets stuck on the first Samsung screen.
I can't get the old superatmos 2.1 kernel anymore (the "very stable and recommended' version) because the file has disappeared from Mediafire.
The old link was http://www.mediafire.com/?14qqbaw311b3wpm
I also tried 2.1.1 and 2.2 from http://www.android-hilfe.de/2869772-post2.html ... and I think 3.2 as well. They have the same problem.
I was a bit scared but downloaded the old I9100GOZHLPL file from
http://sampro.pl/firmware/android/samsung-i9100g/
and put the .tar.md5 file in the "PDA" box, clicked Start and that always takes it back to where it was (ie working again!).
I read through lots of threads here and followed all the little small instructions: USB debug mode on on phone, PIN off, KIES uninstalled on computer, no SD card. But battery and SIM card still in. The only bit I didn't follow was the "you have to install v1.0 first" advice from http://forum.xda-developers.com/showpost.php?p=22421729&postcount=150 because it wasn't in this post. And of course I would like to repeat what you did _exactly_ by getting the 2.1 kernel but can't find it anywhere anymore.
A Chinese page at http://zhidao.baidu.com/question/510191290.html talks about SuperOneClick working but I haven't tried it.
Another page at http://androidforums.com/galaxy-s2-...37-galaxy-s2-gt-i9100g-all-things-root-4.html talks about a ROM that works on all phones except the Chinese variant
Any suggestions?
Hi im new... and I would like to ask how to root alcatel one touch pop s3 5050X android version 4.3
there was a post already on how to root the device but it doesnt work on model 5050X
any help will do. thank you.
sorry if the thread is in the wrong section
Sicnarf26 said:
Hi im new... and I would like to ask how to root alcatel one touch pop s3 5050X android version 4.3
there was a post already on how to root the device but it doesnt work on model 5050X
any help will do. thank you.
sorry if the thread is in the wrong section
Click to expand...
Click to collapse
See the instructions (author has since updated) at
http://click.xda-developers.com/api...Touch Pop S3</b> 5050 | Every Android version
and the second page comments for recovery hints. TWRP requires some study and preparation before use so it's not good to be stuck when attempting recovery.
Note the comment on the 3rd page about the updated recovery image that lets you see what you are doing on the screen. For me I got it working, working in the dark (ie. not seeing anything on screen), so it's too early for a video tutorial.
Please Help me :/
When i use the .cmd, i put /storage/sdcard0 or /storage/sdcard1
I have a message :
''The specified path was not found''
Rooting using Kingo Root
Rooting nowadays is very simple.
But the easiest way to do it is the following:
1. Download Kingo Root for Windows, Mac or Linux;
2. Install Kingo Root;
3. Open the program;
4. Connect your phone to your pc through USB cable and wait for Kingo Root recognize it;
5. If your phone is rootable it will appear a button saying "ROOT", click there (If your device is not rootable then you are out of luck and you must try another method)
6. Don't remove your phone and don't click anywhere, wait until the rooting process is finished;
7. After this your phone should reboot, it means you are now rooted (If your phone did'nt rebooted, manually reboot it then);
8. Enjoy!
Note: Rooting will void the device's warranty, root at your own risk.
Download the phone's drivers if needed and disable Windows, Mac or Linux firewall if needed.
Hope it works for you!
Link for Kingo Root: kingoapp.com
Hiii friends i am happy today to show you that how to root samsung galaxy ace nxt sm g313h
Where's the root bro
rkishu32 said:
Hiii friends i am happy today to show you that how to root samsung galaxy ace nxt sm g313h
Click to expand...
Click to collapse
Please Send solution
Where is the process?please inform if you have found that!
msudhir said:
Please Send solution
Click to expand...
Click to collapse
MODEL NUMBER - SM-G313H(Galaxy ace next)
BASEBAND VERSION - G313HDDU0AOA1
BUILD NUMBER - KOT49H.G313HDDU0AOA1
Okk...I have tried all the methods to root this model SM-G313H...Every method failed...But at last i found the solution...I am describing step by step...
Firstly you have to download a few things-
a) Download windows version of KingoRoot(Not Kingroot!!) and install it in your pc
Link: https://www.kingoapp.com/
b)Download Odin for android preferably Odin v.3.09 for Samsung. You can download any version otherwise.
Now your objectives are mainly two things...firstly,You have to root your phone and then install custom recovery.
Rooting the phone:
a)Allow USB debugging in you model by tapping the "build no" a few times.
b)Connect the mobile with your pc with a working data cable
c)Run KingoRoot.exe. It will detect your phone and follow the instructions.You have to wait till the root is done.At 97/98 % it will ask for rooting in a prompt...you have to click ok..you phone will boot in recovery and after that rooting process will be completed...You can see "SuperUser" in your mobile screen.
Now your phone is rooted.Verify using Rootchecker. Now,the next job is to flash a custom recovery.
Flashing Custom recovery(TWRP)
a)Download TWRP file for SM-G313H...Download "TWRP_2.8.5.0_Vivalto.tar.md5" (Not TWRP_2.8.5.0_Vivalto_flashable.zip).
link given below:
https://forum.xda-developers.com/ace-4/development/recovery-twrp-recovery-2-8-5-0-samsung-t3038601
After download extract it.
a)Switch off your phone.Boot in download mode by pressing 3 keys simultaneously : Home key+Power key+Volume down key
b)Follow the instructions in the screen and enter into download mode by clicking continue
c)Run odin in your pc and connect the phone with pc using a data cable.Odin will detect the phone.Click the option AP and select the TWRP extracted file.Check The AP box.Only 3 options should be checked...Auto reboot,F.reset time and the AP itself.Now click on start and it will flash TWRP in your device.
So,here is the full process regarding rooting and installing TWRP. Its fully functional for this model with the given configuration.Hope its solved but if you are getting any problem feel free to ask.
Hello to all,
This is copy of HELP post i added on --[GT-I930x/T/N][SHV-E210*][SHW-M440S] CF-Auto-Root--. It appears that forum is not active anymore. HOPE YOU CAN HELP ME SOLVE MY MINOR PROBLEM:
Dear Doctor,
I really wanted this [THE ROOT] to work on the first go, but as i learned in kindergarten: A noob stays a noob. At least for a while.
In ODIN, after I did EVERYTHING Master Chinfire said to do, I hit "Start", but the proccess stops and says "Succeed 0/ Failed 1".
So i couldn't finish with the download
+
I can't figure how to attach a screen shot of th error for you.
Please help,
TNX
P.S.
I have tried to ro read different posts on the subject but never found a problem similer to mine. The only solution people offered was to download SuperSU directly through the phone. But in order to do that, i need to open a google account, which is one of the reasons i wish to root the phone on the first place.
What is the phone's model number? Boot into download mode to find it.
audit13 said:
What is the phone's model number? Boot into download mode to find it.
Click to expand...
Click to collapse
When i enter download mode, it says:
ODIN MODE
Product Name: GT-I9300
Custon Binary Download: No
Current Binary: Samsung Official
System Status: Official
Flash twrp to the phone: https://twrp.me/devices/samsunggalaxys3internationalexynos.html
Flash supersu using twrp to get root: http://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
Can someone share a link to stock firmware. Cant seem to find it anywhere.
Did you check sammobile.com?
Eventhough I have done a lot of search in samsung galaxy J2 ACE (G532G),couldn't find a single forum ,post,tutorial in name of J2 ACE..There are rooting tutorials only available for J2 PRIME (G532G),which is a similar ROM variant.I have tried many of J2 Prime tutorials and end up in bootloop/boot lock screen.So requesting XDA developers to help me in creating prerooted firmware.I have added stock roms's google drive link.
Its a stock ROM of J2ACE .I downloaded it after i got into bootloop .Flashed in my J2ACE mobile ,verified working good.
https://docs.google.com/uc?id=0B5BpnlH8S_TWUW51RmNqWmFDNlU&export=download
Any developer kindly use above ROM and create a prerooted ROM.As without root ,the stock marshmallow 6.0.1 ROM filled with bloatwares of samsung ,which are memory eaters.I got left only 500mb,if I add any four or five apps,out of 8GB internal memory.SD card also write protected.I couldnt install and use whatsapp, bcz I end up in exhausting free memory to 50mb.
Please ,any help greatly appreciated by few thousand users of J2 ACE out there.
Below are J2prime G532G tutorials ,I have gone through.I request other J2ACE holders not to give them try.If you have tried them accidentally and ended up in bootloop or boot lock screen,Kindly use ROM from above drive link and flash it with ODIN.
1.Rooting Method of G532G/H/M.(Tried this method and end up in Boot Lock Screen)
https://forum.xda-developers.com/android/development/root-samsung-galaxy-j2-prime-g532m-t3523090
2.ROOT G532G WITHOUT BOOT LOCK PASSWORD ( But it does get into Boot Lock)
https://www.youtube.com/watch?v=yrWmnt3dZKc
http://npmobilehub.com/g532g-root-unlock-success/
Solution :
Video tutorial on flashing J2 ACE stock ROM flashing,If you get "Set Warrenty Bit void" KNOXX error by flashing and also for BOOT Lock Screen,
https://www.youtube.com/watch?v=a5Q9JJwunZM&feature=youtu.be
There is people out there saying use Z3x Box to unlock Boot Lock screen .But it does cost 10,000 Indian currencies ,more price than that of J2 ACE mobile price.Also there is 'no box' version of Z3x samsung tool v24.3 available over internet ,which unfortunately doesnt support G532G Unlocking.There is no latest version of Z3x tool 27.00 without Box available so far.No local unlocking vendors/service centers, i could find in south indian cities around me.So Pre-Rooted ROM is the only hope of People buying Middle end budget phone Samsung Galaxy J2 ACE(G532G).
How can a noob like me tell the difference btw sm-g532g and sm-g532g? J2 Ace (my phone) claims to be model sm-g532g, how do I tell the difference?
Root Samsung j2 ace
Well i cant provide you the rom, but here i can tell how to root it..
For rooting samsung j2 ace-
- First Install the rom which you have provided(yes i have rooted samsung j2 ace by your rom)
- After installing rom, Make sure you dont download any ota update from samsung (very Important)
- Boot your phone into download mode, and flash the twrp recovery. (you can search on google for that and if still you dont get it comment back i will give you download link)
- This time you will see that you phone doesnt go in boot lock (Yellow warning appears but not red one)
- Now boot into recovery by ADB and you will have twrp recovery
- Now flash super-su zip
Thanks
TWRP file & supersu zip needed for J2ACE G532G
Sir,kindly post me the TWRP file ..thanks in advance..
2 methods for TWRP + root
I am using the stock ROM you so kindly have made available.
The first method I have tried with success is "EASY-G532-TWRP+ROOT-NEW". There are an exe file and an MP4 file in the folder. You only need to have Samsung USB drivers installed on your PC. Connect your phone to your PC - normal mode. Play the media file for instructions. Your phone will be rooted witin
https://www.dropbox.com/sh/xjdt8rhw2mme9xy/AAD6S10PRyw3FYQ5yHRVmZfFa?dl=0
The second method is quite simple.
- flash TWRP via Odin
- in recovery mode, flash SuperSU and then no-verity-no-encrypt.
Done.
https://www.dropbox.com/sh/40600gg21da0yec/AADux6dXyqchsMMG-jDmedxDa?dl=0