Hello,
I have found information about my problem, but no exact answer.
I have Motorola RAZR XT910 - I have tried yesterday upgrade official 4.1.2 982.124.13.xt910.retail.en.eu to CM11 KK from XDA.
Root + SafeStrap 3.37 insstalled without problem. Problem occured when I have start install from sd card. Nothing happend for 15 minutes, just installation do not procced (status bar). I had to reinstall ICS with RDS, because my Android broke down.
I have noticed on my bootloader info that is awful... "Device is LOCKED. Status Code: 0"
1. I understand that there is no option to unlock this bootloader ?
2. Can I install CM11, other KK or any other custom ROM with locked bootloader ?
Thank you for help.
peanek said:
Hello,
I have found information about my problem, but no exact answer.
I have Motorola RAZR XT910 - I have tried yesterday upgrade official 4.1.2 982.124.13.xt910.retail.en.eu to CM11 KK from XDA.
Root + SafeStrap 3.37 insstalled without problem. Problem occured when I have start install from sd card. Nothing happend for 15 minutes, just installation do not procced (status bar). I had to reinstall ICS with RDS, because my Android broke down.
I have noticed on my bootloader info that is awful... "Device is LOCKED. Status Code: 0"
1. I understand that there is no option to unlock this bootloader ?
2. Can I install CM11, other KK or any other custom ROM with locked bootloader ?
Thank you for help.
Click to expand...
Click to collapse
1.Correct
2.You can,install Safestrap 3.75 first
Sent from my Razr XT910
welder73 said:
1.Correct
2.You can,install Safestrap 3.75 first
Sent from my Razr XT910
Click to expand...
Click to collapse
I have made this yesterday and tried to install KK by SafeStrap - as I wrote. But if you say this should work - I'll try one more time !
peanek said:
I have made this yesterday and tried to install KK by SafeStrap - as I wrote. But if you say this should work - I'll try one more time !
Click to expand...
Click to collapse
You must install the newest SS 3.75 if you want to flash some Lollipop rom,it's also compatible with KK roms.
Sent from my Razr XT910
welder73 said:
You must install the newest SS 3.75 if you want to flash some Lollipop rom,it's also compatible with KK roms.
Sent from my Razr XT910
Click to expand...
Click to collapse
It worked ! I have had SafeStrap 3.73, upgrade to SS 3.75 worked and I could install CM11 !! Thank you man, I owe you one or two
PS. It is hard to find 3.75 version.
peanek said:
It worked ! I have had SafeStrap 3.73, upgrade to SS 3.75 worked and I could install CM11 !! Thank you man, I owe you one or two
PS. It is hard to find 3.75 version.
Click to expand...
Click to collapse
link posted in CM12 OP
Related
Stock ROM JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4THIS IS JB 4.1.2 FOR XT910TO INSTALL THIS ROM YOU NEED FLASH NEW VERIZON JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOTKERNEL
ROM
artur0588 said:
Stock ROM JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4THIS IS JB 4.1.2 FOR XT910TO INSTALL THIS ROM YOU NEED FLASH NEW VERIZON JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOTKERNEL
ROM
Click to expand...
Click to collapse
Right. I'll come back with results.
Debloated and GSM ported?
Thanks
heblu said:
Right. I'll come back with results.
Debloated and GSM ported?
Thanks
Click to expand...
Click to collapse
Yes, no verizon apps and GSM ready. Don't need GSM Patch, everything working.
artur0588 said:
Yes, no verizon apps and GSM ready. Don't need GSM Patch, everything working.
Click to expand...
Click to collapse
Great. In the next few hours I'll be back
once i boot up my device, it says
"Security test failure
Validation of cryptographic module failed, please restart"
i cant get pass that screen, what am i supposed to do after installing the rom
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Any noticeable changes ?
Like my work visit my channel once on YouTube
YouTube.com/user/Therazrguy
heblu said:
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Click to expand...
Click to collapse
hmm im installing it on rom 2, and rom 1 is JBX D-wiz
am i supposed to flash back to verizon jb first before installing ?
danieltang34 said:
once i boot up my device, it says
"Security test failure
Validation of cryptographic module failed, please restart"
i cant get pass that screen, what am i supposed to do after installing the rom
Click to expand...
Click to collapse
You forgot flash new kernel
heblu said:
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Click to expand...
Click to collapse
Hi, cannot download KERNEL, can you please attached it in another way, tks in advance.
danieltang34 said:
hmm im installing it on rom 2, and rom 1 is based JBX D-wiz
am i supposed to flash back to verizon jb first before installing ?
Click to expand...
Click to collapse
first reboot to BMM recovery and flash kernel from OP. then wipe all and install rom
Lzto1320 said:
Hi, cannot download KERNEL, can you please attached it in another way, tks in advance.
Click to expand...
Click to collapse
I have attached in OP
artur0588 said:
i have attached in op
Click to expand...
Click to collapse
tks so much for your work! Great man!!!
Hi, some noobie here, just wanna make sure the following steps are correct before i try, really scared if got bricked:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
6. Profit?
Or anything else should i do? Thanks for any suggestion. Sorry if already asked frequently..
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
shakti15 said:
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
This is from the soak test I believe.
hansip87 said:
Hi, some noobie here, just wanna make sure the following steps are correct before i try, really scared if got bricked:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
6. Profit?
Or anything else should i do? Thanks for any suggestion. Sorry if already asked frequently..
Click to expand...
Click to collapse
al good
after you have backup CID and your kernel you can restore them just to be sure
you can flash rom in second system (webtop partition). To switch, reboot into BMM, flash desired kernel, reboot
shakti15 said:
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
yes
heblu said:
yes
Click to expand...
Click to collapse
i have a sily question. can we dual boot this rom and flash kernel separately becouse i donnt want to lose my stock rom ics and all apps.
one more question is there a way to backup my whole rom and restore as it is when i want .?
one question more ics will not work on jelly bean kerne.?
thanx in advance for answer my silly question
Screenshots?
This ROM is like the Verizon ROM but without the Verizon apps and for XT910 right? Is the original one, with motoblur?
PatrickDziura said:
Screenshots?
This ROM is like the Verizon ROM but without the Verizon apps and for XT910 right? Is the original one, with motoblur?
Click to expand...
Click to collapse
Yes, original.
Hello All
I'm new here
I need to know the steps in details to upgrade my moto razr xt910 from ICS to jely bean 4.2.2
Any help !!
Hi!
First you need to install a custom recovery like BMM or SS ! ...than just flash in recovery the new custom rom !
Good luck !
surdu_petru said:
Hi!
First you need to install a custom recovery like BMM or SS ! ...than just flash in recovery the new custom rom !
Good luck !
Click to expand...
Click to collapse
actually I dont have any experience !
should I first make a recovery by using ss , then install the new rom and flash it ?
Yes that is a good place to start safestrap is good to start with and safer just do not flash any thing on the stock slot yet!
Sent from my XT912 using Tapatalk
lara_razr said:
actually I dont have any experience !
should I first make a recovery by using ss , then install the new rom and flash it ?
Click to expand...
Click to collapse
There is a big thread written by Hrshi who made a bunch of tutorials for BMM, etc. For SS you can read on HAshcode's blog "How to Safestrap"
dtrail1 said:
There is a big thread written by Hrshi who made a bunch of tutorials for BMM, etc. For SS you can read on HAshcode's blog "How to Safestrap"
Click to expand...
Click to collapse
safestrap is very easy thanks hashcode
lara_razr said:
Hello All
I'm new here
I need to know the steps in details to upgrade my moto razr xt910 from ICS to jely bean 4.2.2
Any help !!
Click to expand...
Click to collapse
Where are you from? May be you can find your language local site with step-by-step instructions.
Because sometime English is much difficult for newbie.
lara_razr said:
Hello All
I'm new here
I need to know the steps in details to upgrade my moto razr xt910 from ICS to jely bean 4.2.2
Any help !!
Click to expand...
Click to collapse
Honestly i would stay on ICS.Reason because ics roms are more stable and you can over and underclock ICS with motomizor on google play.With jellybean this is not possible atm.As far as kecex 4.2.2+ roms go, you don't need to upgrade to jellybean to beable to use any kecex rom.Once you upgrade to jellybean you cannot downgrade back to ICS.So think hard before you decide what you want to do.
If your looking to just upgrade your stock firmware and don't care about the other stuff i mentioned, then by all means go for it.
Hello everyone.
Could you guys tell me how to install KK rom on xt910?
It's my brother's phone so I don't mess this phone up.
I read that I need root, then install safestrap and then finally install KK
Please correct me if I'm wrong or if I forgot about sth
The phone has 982.124.14 rom currently.
dollar7 said:
Hello everyone.
Could you guys tell me how to install KK rom on xt910?
It's my brother's phone so I don't mess this phone up.
I read that I need root, then install safestrap and then finally install KK
Please correct me if I'm wrong or if I forgot about sth
The phone has 982.124.14 rom currently.
Click to expand...
Click to collapse
Assuming you are in JB, your thoughts are right. After installing Safestrap, create/activate a new Slot, Slot 1 for example, and play there flashing thr Roms.
Hi. Im very New to Rooting kind of stuff..
My Motorola Razr maxx was good in STOCK GB 2.3.6 ( 65.1.40.XT910.PSHAsiaRetail.en.03 )
I UPDATED ( OTA ) to ICS 4.0.4. This ROM really sucks. I jus wanna roll back to Stock GB.
I somehow got the Official ROM of GB. Pls guide me wat should be done next.
I really dont care bricking my phone or any stuff.. I need the GINGERBREAD Back.
tHANKS IN ADVANCE
you cannot downgrade stock android version
Sent from my XT907 using Tapatalk
Actually i got d info that, by Rooting the Phone and then installing SAFESTRAP, i can install custom ROM. is that so ?
Or is there any way i can unlock the bootloader and then install Custom ROM GB ??
srikanth786 said:
Actually i got d info that, by Rooting the Phone and then installing SAFESTRAP, i can install custom ROM. is that so ?
Or is there any way i can unlock the bootloader and then install Custom ROM GB ??
Click to expand...
Click to collapse
yes, you can root and install a custom rom, I don't know if there any custom gingerbread roms that will work.
GB Failed
sd_shadow said:
yes, you can root and install a custom rom, I don't know if there any custom gingerbread roms that will work.
Click to expand...
Click to collapse
I installed SAFESTARP and then created a partition.
Selected the ZIP FILE ( GB ROM ) and gave INSTALL.
It says error. is there any way can i unlock the Bootloader ????
srikanth786 said:
I installed SAFESTARP and then created a partition.
Selected the ZIP FILE ( GB ROM ) and gave INSTALL.
It says error. is there any way can i unlock the Bootloader ????
Click to expand...
Click to collapse
No,there isn't.
And you can't flash stock rom with SS...or any custom GB rom because you're on ICS.
Try Liquidsmooth Milestone version,that's Kitkat 4.4.4
Sent from my Razr XT910
Hi,
my XT910 is still on factory Android version. (2.3 I think).
I'd love to update to lolipop or 4.4. My phone is rooted, I have busybox installed and safestrap 1.07.
I found some instructions and some howtos. But the reqirement is always Safestrap v3.75.
When I now try to install Safestrap v3.75 an error comes up:
Parse error There is a problem parsing the package
Click to expand...
Click to collapse
I've tried different sources, my phone is allowed to install unknown sources AND I tried different file manager.
(I usually use totalcmd)
I need some help please
thanks
da.cappo said:
Hi,
my XT910 is still on factory Android version. (2.3 I think).
I'd love to update to lolipop or 4.4. My phone is rooted, I have busybox installed and safestrap 1.07.
I found some instructions and some howtos. But the reqirement is always Safestrap v3.75.
When I now try to install Safestrap v3.75 an error comes up:
I've tried different sources, my phone is allowed to install unknown sources AND I tried different file manager.
(I usually use totalcmd)
I need some help please
thanks
Click to expand...
Click to collapse
That error is because you are still on GB,you must upgrade at least to ICS.
Sent from my Razr XT910
welder73 said:
That error is because you are still on GB,you must upgrade at least to ICS.
Sent from my Razr XT910
Click to expand...
Click to collapse
Ok welder73,thanks for your quick reply. Do you know....is the backup I made with safestrap 1.07 still accurate with the newer version of safestrap? I mean can I go back?
First to ICS -> then Safestrap v3.75 -> then Lolipop
many thanks!!!
da.cappo said:
Ok welder73,thanks for your quick reply. Do you know....is the backup I made with safestrap 1.07 still accurate with the newer version of safestrap? I mean can I go back?
First to ICS -> then Safestrap v3.75 -> then Lolipop
many thanks!!!
Click to expand...
Click to collapse
When you upgrade to ICS there is no way to go back to GB,also you can't go back from JB to ICS.
Just upgrade to ICS,root it,install SS 3.75 and test roms on slot 1,that way you'll always have your stock slot untouched.
Sent from my Razr XT910