Hi,
my XT910 is still on factory Android version. (2.3 I think).
I'd love to update to lolipop or 4.4. My phone is rooted, I have busybox installed and safestrap 1.07.
I found some instructions and some howtos. But the reqirement is always Safestrap v3.75.
When I now try to install Safestrap v3.75 an error comes up:
Parse error There is a problem parsing the package
Click to expand...
Click to collapse
I've tried different sources, my phone is allowed to install unknown sources AND I tried different file manager.
(I usually use totalcmd)
I need some help please
thanks
da.cappo said:
Hi,
my XT910 is still on factory Android version. (2.3 I think).
I'd love to update to lolipop or 4.4. My phone is rooted, I have busybox installed and safestrap 1.07.
I found some instructions and some howtos. But the reqirement is always Safestrap v3.75.
When I now try to install Safestrap v3.75 an error comes up:
I've tried different sources, my phone is allowed to install unknown sources AND I tried different file manager.
(I usually use totalcmd)
I need some help please
thanks
Click to expand...
Click to collapse
That error is because you are still on GB,you must upgrade at least to ICS.
Sent from my Razr XT910
welder73 said:
That error is because you are still on GB,you must upgrade at least to ICS.
Sent from my Razr XT910
Click to expand...
Click to collapse
Ok welder73,thanks for your quick reply. Do you know....is the backup I made with safestrap 1.07 still accurate with the newer version of safestrap? I mean can I go back?
First to ICS -> then Safestrap v3.75 -> then Lolipop
many thanks!!!
da.cappo said:
Ok welder73,thanks for your quick reply. Do you know....is the backup I made with safestrap 1.07 still accurate with the newer version of safestrap? I mean can I go back?
First to ICS -> then Safestrap v3.75 -> then Lolipop
many thanks!!!
Click to expand...
Click to collapse
When you upgrade to ICS there is no way to go back to GB,also you can't go back from JB to ICS.
Just upgrade to ICS,root it,install SS 3.75 and test roms on slot 1,that way you'll always have your stock slot untouched.
Sent from my Razr XT910
Related
Stock ROM JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4THIS IS JB 4.1.2 FOR XT910TO INSTALL THIS ROM YOU NEED FLASH NEW VERIZON JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOTKERNEL
ROM
artur0588 said:
Stock ROM JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4THIS IS JB 4.1.2 FOR XT910TO INSTALL THIS ROM YOU NEED FLASH NEW VERIZON JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOTKERNEL
ROM
Click to expand...
Click to collapse
Right. I'll come back with results.
Debloated and GSM ported?
Thanks
heblu said:
Right. I'll come back with results.
Debloated and GSM ported?
Thanks
Click to expand...
Click to collapse
Yes, no verizon apps and GSM ready. Don't need GSM Patch, everything working.
artur0588 said:
Yes, no verizon apps and GSM ready. Don't need GSM Patch, everything working.
Click to expand...
Click to collapse
Great. In the next few hours I'll be back
once i boot up my device, it says
"Security test failure
Validation of cryptographic module failed, please restart"
i cant get pass that screen, what am i supposed to do after installing the rom
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Any noticeable changes ?
Like my work visit my channel once on YouTube
YouTube.com/user/Therazrguy
heblu said:
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Click to expand...
Click to collapse
hmm im installing it on rom 2, and rom 1 is JBX D-wiz
am i supposed to flash back to verizon jb first before installing ?
danieltang34 said:
once i boot up my device, it says
"Security test failure
Validation of cryptographic module failed, please restart"
i cant get pass that screen, what am i supposed to do after installing the rom
Click to expand...
Click to collapse
You forgot flash new kernel
heblu said:
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Click to expand...
Click to collapse
Hi, cannot download KERNEL, can you please attached it in another way, tks in advance.
danieltang34 said:
hmm im installing it on rom 2, and rom 1 is based JBX D-wiz
am i supposed to flash back to verizon jb first before installing ?
Click to expand...
Click to collapse
first reboot to BMM recovery and flash kernel from OP. then wipe all and install rom
Lzto1320 said:
Hi, cannot download KERNEL, can you please attached it in another way, tks in advance.
Click to expand...
Click to collapse
I have attached in OP
artur0588 said:
i have attached in op
Click to expand...
Click to collapse
tks so much for your work! Great man!!!
Hi, some noobie here, just wanna make sure the following steps are correct before i try, really scared if got bricked:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
6. Profit?
Or anything else should i do? Thanks for any suggestion. Sorry if already asked frequently..
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
shakti15 said:
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
This is from the soak test I believe.
hansip87 said:
Hi, some noobie here, just wanna make sure the following steps are correct before i try, really scared if got bricked:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
6. Profit?
Or anything else should i do? Thanks for any suggestion. Sorry if already asked frequently..
Click to expand...
Click to collapse
al good
after you have backup CID and your kernel you can restore them just to be sure
you can flash rom in second system (webtop partition). To switch, reboot into BMM, flash desired kernel, reboot
shakti15 said:
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
yes
heblu said:
yes
Click to expand...
Click to collapse
i have a sily question. can we dual boot this rom and flash kernel separately becouse i donnt want to lose my stock rom ics and all apps.
one more question is there a way to backup my whole rom and restore as it is when i want .?
one question more ics will not work on jelly bean kerne.?
thanx in advance for answer my silly question
Screenshots?
This ROM is like the Verizon ROM but without the Verizon apps and for XT910 right? Is the original one, with motoblur?
PatrickDziura said:
Screenshots?
This ROM is like the Verizon ROM but without the Verizon apps and for XT910 right? Is the original one, with motoblur?
Click to expand...
Click to collapse
Yes, original.
Okay, hopefully someone out there knows the answer to this. I am on a 4.4.2 rom (slot 2) and a 4.3 rom (slot1) and want to go back to a 4.1.2 rom in any slot and okay with deleting both of the other roms, i.e. Aviator Blur 3.0.9, but when I try to run a 4.1.2 rom in safestrap it fails. I have 4.1.2 stock blur in my Stock slot. Any ideas. Am I s-out of luck?
Thanks.
Saepak
What safestrap version are you using?
Newer SS versions are not compatible with older ROMs.
DROID RAZR with Tapatalk 4
neo.ank said:
What safestrap version are you using?
Newer SS versions are not compatible with older ROMs.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
3.51. Can I downgrade it back to 3.11, can I install a backup?
saepak said:
3.51. Can I downgrade it back to 3.11, can I install a backup?
Click to expand...
Click to collapse
SS 3.5x is not compatible with Aviator.
You should install SS 3.60 and then use the ROM version(check the ROM thread) that is compatible with it.
The flashing instructions should be there.
You cannot downgrade safestrap easily so its better to update it.
Hi everyone! I'm new to this Moto Razr XT910, a korean version one. I have a few questions to ask:
-Is this the device that has an official support by CM? the code named umts_spyder builds? I'm just confused by the other variants ://
-Since this is a korean version with AT&T on it, can I change this to a sim-free (international version)? If so, can you link me some useful guides out there? I've searched for a couple of hours but I never found a good guide for noobies containing on how-to flashing and unlocking bt
I'm an experienced user on flashing this on that and compiling this and that but hope you could understand my situation as if this is a new phone to me Thanks alot! Just an urgent matter.
XT910 is the umts_spyder and it is officially supported by CM.
As for the sim-lock, I'm not certain that xt910 are carrier locked but if they are, it ain't very common hence no unlocking guide.
While the flashing in short goes like this.
1.) Root
2.) Download a recovery (Safestrap or BMM).
3.) Install recovery.
4.) Boot into recovery.
5.) Create a ROM-slot.
6.) Wipe all
7.) Flash ROM zip.
8.) Flash additional zip if any.
9.) Reboot.
Not very detailed but get the idea.
DROID RAZR with Tapatalk 4
neo.ank said:
XT910 is the umts_spyder and it is officially supported by CM.
As for the sim-lock, I'm not certain that xt910 are carrier locked but if they are, it ain't very common hence no unlocking guide.
While the flashing in short goes like this.
1.) Root
2.) Download a recovery (Safestrap or BMM).
3.) Install recovery.
4.) Boot into recovery.
5.) Create a ROM-slot.
6.) Wipe all
7.) Flash ROM zip.
8.) Flash additional zip if any.
9.) Reboot.
Not very detailed but get the idea.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Thank you so much! The only stuff that I'm worrying about is the incompatibilities between flashing an international version ROM to a region specified device which is a Korean version. After some deep searches, thank goodness I found this post on a thread being discussed about converting a region specified device into an international one. Anyway here it is:
Semseddin said:
I can't provide you in details since there're are guides for it but briefly you'd have to delete cid with fastboot or bmm but make a backup of it before deletion. You can flash all XT910 firmwares with fastboot just don't forget to delete the cdt.bin line from the RSD LITE XML files that you'd flash. This way cdt.bin partition on your device will not be upgraded to 5 or 7 and stay version 4 which is ICS.
Better create a nandroid backup of your stock rom with bmm recovery and provide necessary files from your device to find stock fastboot of XT910S ICS to firmware-team ?
Click to expand...
Click to collapse
Do you know what is RSD lite XML file and cdt.bin? is these two included on the ROM you'll flash? Anyway, once I've upgraded to ICS, can I freely flash any JB to KK based ROMs? Sorry for bothering with all of my dumbness
EDIT
Nevermind, I just knew RSD lite
neo.ank said:
XT910 is the umts_spyder and it is officially supported by CM.
As for the sim-lock, I'm not certain that xt910 are carrier locked but if they are, it ain't very common hence no unlocking guide.
While the flashing in short goes like this.
1.) Root
2.) Download a recovery (Safestrap or BMM).
3.) Install recovery.
4.) Boot into recovery.
5.) Create a ROM-slot.
6.) Wipe all
7.) Flash ROM zip.
8.) Flash additional zip if any.
9.) Reboot.
Not very detailed but get the idea.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
One more question, I've been through some xda and google searches and I hope this statement I've found is TRUE :fingers-crossed:
-Since my device is a Korean Version with a specified carrier on it, flashing ICS update on this device will activate its network for a global use which is considered now for international use... is that true? Does it mean that I don't have to delete some lines inside the xml file anymore? :fingers-crossed: and just root it, install BMM or SS recovery and flash CM11 on it? Do I really have to delete CID partition before flashing JB and KK based ROMs? Please needing your help
EDIT:
-Someone said that you can flash any region based firmware to your device? is it true?
-My device is actually an XT910S, do I only have to flash XT910S based ROMs? or any of them (XT910 and XT910K)?
-Can I flash CM11 with stock 2.3.5? or is it really necessary to update to ICS in order to flash JB and KK based ROMs?
Pleaseee Im begging you
JovieBrett said:
One more question, I've been through some xda and google searches and I hope this statement I've found is TRUE :fingers-crossed:
-Since my device is a Korean Version with a specified carrier on it, flashing ICS update on this device will activate its network for a global use which is considered now for international use... is that true? Does it mean that I don't have to delete some lines inside the xml file anymore? :fingers-crossed: and just root it, install BMM or SS recovery and flash CM11 on it? Do I really have to delete CID partition before flashing JB and KK based ROMs? Please needing your help
EDIT:
-Someone said that you can flash any region based firmware to your device? is it true?
-My device is actually an XT910S, do I only have to flash XT910S based ROMs? or any of them (XT910 and XT910K)?
-Can I flash CM11 with stock 2.3.5? or is it really necessary to update to ICS in order to flash JB and KK based ROMs?
Pleaseee Im begging you
Click to expand...
Click to collapse
The international usage after ICS update is for the cdma version XT912 so it doesn't apply to you. As I said earlier, A carrier locked XT910 isn't very common.
As for the region specific ROMS, The custom ROMs are not region specific but if you want to flash stock MOTO roms then you need to consider the region.
However, many Asian users can flash European JB builds without deleting their cid.
As far as I know, you do need to upgrade in order to flash custom ROM.
But you can surely try to root it before upgrading and see if you can install SS or BMM.
DROID RAZR with Tapatalk 4
neo.ank said:
The international usage after ICS update is for the cdma version XT912 so it doesn't apply to you. As I said earlier, A carrier locked XT910 isn't very common.
As for the region specific ROMS, The custom ROMs are not region specific but if you want to flash stock MOTO roms then you need to consider the region.
However, many Asian users can flash European JB builds without deleting their cid.
As far as I know, you do need to upgrade in order to flash custom ROM.
But you can surely try to root it before upgrading and see if you can install SS or BMM.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Thank you for the response. So it means, I will update the device via OTA update first to get the stock JB 4.1.2 then after that, I can now be able to flash custom ROMs whatever I want?
Yes that should do it.
Do check the root thread for supported builds before updating though.
DROID RAZR with Tapatalk 4
neo.ank said:
Yes that should do it.
Do check the root thread for supported builds before updating though.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Thank you, btw do you know how to backup CID?
JovieBrett said:
Thank you, btw do you know how to backup CID?
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showthread.php?p=36172192
Maybe this will help you.
Sent from my Razr XT910
welder73 said:
Here http://forum.xda-developers.com/showthread.php?p=36172192
Maybe this will help you.
Sent from my Razr XT910
Click to expand...
Click to collapse
WOW thank you so much! I've made a backup now ^_^ Will give you thanks later cause I've ran out of thank mehehe
welder73 said:
Here http://forum.xda-developers.com/showthread.php?p=36172192
Maybe this will help you.
Sent from my Razr XT910
Click to expand...
Click to collapse
Anyway do you know how to fix and what is the error behind this while Im flashing via RSD, it says something like "ebr failed"
Hello all,
I've been trying to figure out how to flash liquidsmooth on my phone for a while now. Everytime i try and install and boot into twrp recovery my phone crashes and i have to reflash the stock mk2.
Can anyone let me know what im missing here.
i have installed saferoot to root my phone but can't get a recovery installed successfully.
thanks
lisi80 said:
Hello all,
I've been trying to figure out how to flash liquidsmooth on my phone for a while now. Everytime i try and install and boot into twrp recovery my phone crashes and i have to reflash the stock mk2.
Can anyone let me know what im missing here.
i have installed saferoot to root my phone but can't get a recovery installed successfully.
thanks
Click to expand...
Click to collapse
You can't flash AOSP roms on MK2/Safestrap, only TW (TouchWiz) based roms matching your current stock version (4.3).
thanks Oishi,
Can I flash back to an older stock rom that is not safestrap?
lisi80 said:
thanks Oishi,
Can I flash back to an older stock rom that is not safestrap?
Click to expand...
Click to collapse
No, once you're on Stock MK2 you're locked to MK2 and have no other options than safestrap.
Oishikatta said:
No, once you're on Stock MK2 you're locked to MK2 and have no other options than safestrap.
Click to expand...
Click to collapse
lisi80 said:
Hello all,
I've been trying to figure out how to flash liquidsmooth on my phone for a while now. Everytime i try and install and boot into twrp recovery my phone crashes and i have to reflash the stock mk2.
Can anyone let me know what im missing here.
i have installed saferoot to root my phone but can't get a recovery installed successfully.
thanks
Click to expand...
Click to collapse
Here is a somewhat current list of compatible SS Roms
http://forum.xda-developers.com/showthread.php?t=2630040
Also check page 1 in the Android Development section; There are a few new ones that look tempting such as BajaRom for TW
Check out Eclipse 3.0 for an AOSP feel with TW compatibility.
Hello,
I have found information about my problem, but no exact answer.
I have Motorola RAZR XT910 - I have tried yesterday upgrade official 4.1.2 982.124.13.xt910.retail.en.eu to CM11 KK from XDA.
Root + SafeStrap 3.37 insstalled without problem. Problem occured when I have start install from sd card. Nothing happend for 15 minutes, just installation do not procced (status bar). I had to reinstall ICS with RDS, because my Android broke down.
I have noticed on my bootloader info that is awful... "Device is LOCKED. Status Code: 0"
1. I understand that there is no option to unlock this bootloader ?
2. Can I install CM11, other KK or any other custom ROM with locked bootloader ?
Thank you for help.
peanek said:
Hello,
I have found information about my problem, but no exact answer.
I have Motorola RAZR XT910 - I have tried yesterday upgrade official 4.1.2 982.124.13.xt910.retail.en.eu to CM11 KK from XDA.
Root + SafeStrap 3.37 insstalled without problem. Problem occured when I have start install from sd card. Nothing happend for 15 minutes, just installation do not procced (status bar). I had to reinstall ICS with RDS, because my Android broke down.
I have noticed on my bootloader info that is awful... "Device is LOCKED. Status Code: 0"
1. I understand that there is no option to unlock this bootloader ?
2. Can I install CM11, other KK or any other custom ROM with locked bootloader ?
Thank you for help.
Click to expand...
Click to collapse
1.Correct
2.You can,install Safestrap 3.75 first
Sent from my Razr XT910
welder73 said:
1.Correct
2.You can,install Safestrap 3.75 first
Sent from my Razr XT910
Click to expand...
Click to collapse
I have made this yesterday and tried to install KK by SafeStrap - as I wrote. But if you say this should work - I'll try one more time !
peanek said:
I have made this yesterday and tried to install KK by SafeStrap - as I wrote. But if you say this should work - I'll try one more time !
Click to expand...
Click to collapse
You must install the newest SS 3.75 if you want to flash some Lollipop rom,it's also compatible with KK roms.
Sent from my Razr XT910
welder73 said:
You must install the newest SS 3.75 if you want to flash some Lollipop rom,it's also compatible with KK roms.
Sent from my Razr XT910
Click to expand...
Click to collapse
It worked ! I have had SafeStrap 3.73, upgrade to SS 3.75 worked and I could install CM11 !! Thank you man, I owe you one or two
PS. It is hard to find 3.75 version.
peanek said:
It worked ! I have had SafeStrap 3.73, upgrade to SS 3.75 worked and I could install CM11 !! Thank you man, I owe you one or two
PS. It is hard to find 3.75 version.
Click to expand...
Click to collapse
link posted in CM12 OP