Phone went dead and i charged it then i tryed to reboot and now it is stuck in a boot loop. This is a stock Htc one m8 it has not been rooted or S-off. I am Running the latest 4.4.4 update from [email protected] I was able to get fastboot off and get into recovery and try to do a reset but there seems to be no file to load.
dgraff80 said:
I was able to get fastboot off and get into recovery and try to do a reset but there seems to be no file to load.
Click to expand...
Click to collapse
Factory reset doesn't "load" anything. All it does is wipe user data partition, possibly fixing any conflicts with user settings or apps.
Try downloading and running the 4.4.4 RUU.
Related
i recently rooted my phone and flashed clockwork and was running beastmode kernal on stock rom.everything was working ok i used to get little glitches here and there so i tried to restore my phone back to factory.i entered the recovery mode and wipe date/factory reset and then went on to restore the backup.everything went smooth until i reboot the phone and now the phone is stuck in the droid(eye logo) and wont past that at all and just glitches and freezes on that screen.my friend has tried to fix it but there is no communication between the phone and the computer(usb debugging must have been disabled when i wipe data/factory reset and i basically cant do anything to fix it.is there a way around this to where i can just reset the phone to factory or install a rom or something
nathan101 said:
i recently rooted my phone and flashed clockwork and was running beastmode kernal on stock rom.everything was working ok i used to get little glitches here and there so i tried to restore my phone back to factory.i entered the recovery mode and wipe date/factory reset and then went on to restore the backup.everything went smooth until i reboot the phone and now the phone is stuck in the droid(eye logo) and wont past that at all and just glitches and freezes on that screen.my friend has tried to fix it but there is no communication between the phone and the computer(usb debugging must have been disabled when i wipe data/factory reset and i basically cant do anything to fix it.is there a way around this to where i can just reset the phone to factory or install a rom or something
Click to expand...
Click to collapse
Your phone is not bricked. When the phone is stuck on the droid eye, hold the power button and the volume down key at the same time until it reboots. This will get you into bootloader mode. Press the volume down key to highlight recovery and press the power button to enter it. Once you're in recovery go ahead and restore a backup or reflash something new. Either way make sure to do a full wipe.
Sent from my HTC6435LVW using xda app-developers app
klarson said:
Your phone is not bricked. When the phone is stuck on the droid eye, hold the power button and the volume down key at the same time until it reboots. This will get you into bootloader mode. Press the volume down key to highlight recovery and press the power button to enter it. Once you're in recovery go ahead and restore a backup or reflash something new. Either way make sure to do a full wipe.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
thats what i did i restored my backup and this is what happens. and i cannot push any files over to the phone because usb debugging is not enabled so there is no communication between the phone and computer at all
boot into recovery then use "adb push <path to rom> /mnt/sdcard/" to put a rom on the sd then install. Make sure you use a boot.img that came with the rom if it has one as it may cause problems if you don't.
Edit: you will need another rom for this and I would recommend reflashing a boot.img
Jmlannan said:
boot into recovery then use "adb push <path to rom> /mnt/sdcard/" to put a rom on the sd then install. Make sure you use a boot.img that came with the rom if it has one as it may cause problems if you don't.
Edit: you will need another rom for this and I would recommend reflashing a boot.img
Click to expand...
Click to collapse
the problem im having is the phone is not being recongnized by the adb so there for i can not push anything to the phone.i have no communication with the phone at all so i cant push any files at all.im looking for a way around this
nathan101 said:
i recently rooted my phone and flashed clockwork and was running beastmode kernal on stock rom.everything was working ok i used to get little glitches here and there so i tried to restore my phone back to factory.i entered the recovery mode and wipe date/factory reset and then went on to restore the backup.everything went smooth until i reboot the phone and now the phone is stuck in the droid(eye logo) and wont past that at all and just glitches and freezes on that screen.my friend has tried to fix it but there is no communication between the phone and the computer(usb debugging must have been disabled when i wipe data/factory reset and i basically cant do anything to fix it.is there a way around this to where i can just reset the phone to factory or install a rom or something
Click to expand...
Click to collapse
USB debugging has nothing to do with ADB in recovery, recovery basically has its own kernel and ADB is always enabled. Are you saying ADB doesn't work in recovery? If so, it is probably a driver problem with your computer. Also, some phones randomly get corrupt /data/ partitions (mine used to get them until I started using DSB's stock kernel with system write) and the only way to fix it is to do a factory reset or restore a backup. This might be what happened to you. If so just do a factory restore and see if it will boot.
Perhaps reflashing recovery? Worth a try if ur still having problems, also try installing then uninstalling htcs sync app.
nathan101 said:
i recently rooted my phone and flashed clockwork and was running beastmode kernal on stock rom.everything was working ok i used to get little glitches here and there so i tried to restore my phone back to factory.i entered the recovery mode and wipe date/factory reset and then went on to restore the backup.everything went smooth until i reboot the phone and now the phone is stuck in the droid(eye logo) and wont past that at all and just glitches and freezes on that screen.my friend has tried to fix it but there is no communication between the phone and the computer(usb debugging must have been disabled when i wipe data/factory reset and i basically cant do anything to fix it.is there a way around this to where i can just reset the phone to factory or install a rom or something
Click to expand...
Click to collapse
Try restoring back to stock with the Droid DNA RUU, i had issues with it locking up and freezing and i couldnt do a thing with it. i stumbled on the RUU and followed the instructions and re-stocked it. then just root and flash again. worked for me and im now running the Battery Plus ROM and have no issues yet. good luck
Just be sure to re lock before you flash the ruu
Sent from my HTC6435LVW using xda premium
So I had my HTC One rooted and I was using Revolution HD Rom with TWRP recovery. I decided to install rooted 4.3 Rom from http://forum.xda-developers.com/showthread.php?t=2341395 which means that
- Installed Radio from thread i mentioned
- Installed faux kernel
- Installed the ROM
The installation went fine and when I booted, I kept getting com.android.phone error. I read that I have to re-flash the radio. I did but no success and phone kept restarting. I did the whole process couple of times but no success.
The i decided to go back to 4.2 so i decided to install CleanROM which comes with built-in kernel (http://forum.xda-developers.com/showthread.php?t=2253527) ... I mean the ROM.ZIP has kernel built in as wel .. .
So I installed it and when i started my phone, It is stuck in HTC One logo. No matter how many times i try, it is still there.
With clean ROM, I believe I have installed old kernel, now i don't know how to get my phone get back to workign ..
Need HELP
..alee said:
So I had my HTC One rooted and I was using Revolution HD Rom with TWRP recovery. I decided to install rooted 4.3 Rom from http://forum.xda-developers.com/showthread.php?t=2341395 which means that
- Installed Radio from thread i mentioned
- Installed faux kernel
- Installed the ROM
The installation went fine and when I booted, I kept getting com.android.phone error. I read that I have to re-flash the radio. I did but no success and phone kept restarting. I did the whole process couple of times but no success.
The i decided to go back to 4.2 so i decided to install CleanROM which comes with built-in kernel (http://forum.xda-developers.com/showthread.php?t=2253527) ... I mean the ROM.ZIP has kernel built in as wel .. .
So I installed it and when i started my phone, It is stuck in HTC One logo. No matter how many times i try, it is still there.
With clean ROM, I believe I have installed old kernel, now i don't know how to get my phone get back to workign ..
Need HELP
Click to expand...
Click to collapse
You probably just need to clear cache .. did you do a full factory reset going from GPE 4.3 to CleanRom ?
To clear the cache boot the phone to the bootloader (power + Vol down)
plug into the pc and go to your Fastboot folder and open command prompt and type "fastboot erase cache" then "fastboot reboot"
You really have to do a complete wipe/ factory reset when going from one version number to another IE: 4.3 to 4.2.2. You should also note that flashing a kernel has to be last in the line .. the rom you flashed last overwrites the kernel you just flashed.
So the correct order would be:
Factory reset / Wipe
Install Rom
Flash Radio
Flash Kernel ( if you stick with CleanRom skip this step)
clsA said:
You probably just need to clear cache .. did you do a full factory reset going from GPE 4.3 to CleanRom ?
To clear the cache boot the phone to the bootloader (power + Vol down)
plug into the pc and go to your Fastboot folder and open command prompt and type "fastboot erase cache" then "fastboot reboot"
You really have to do a complete wipe/ factory reset when going from one version number to another IE: 4.3 to 4.2.2. You should also note that flashing a kernel has to be last in the line .. the rom you flashed last overwrites the kernel you just flashed.
So the correct order would be:
Factory reset / Wipe
Install Rom
Flash Radio
Flash Kernel ( if you stick with CleanRom skip this step)
Click to expand...
Click to collapse
tried couple of things, didn't work. I ended up downloading viperrom and it worked fine. thanks
My sisters DNA is running a sense rom of some sort. She wants to go back to completely stock BUT can't flash stock rom because twrp won't mount cache, dalvic, or data to be able to wipe anything. says unable to mount... Forrmat data doesn't work. nothing. I think mounting system and wiping it works but when you reboot the phone the system is still there. I tried flashing the rom on top but it gets few seconds in and it reboots the phone. Can't RUU because when program says waiting for bootloader, it tries to boot into bootloader but actually reboots the phone. Then RUU says connection failed. Adbing or fastbooting into bootloader or recovery just reboots the phone. Can't flash new recovery neither. It says flashing the recovery was successful but recovery or version of it doesn't change. Also for some reason Twrp is a bit laggy.
I'm running out of ideas here. The current rom she's running is lagging and causes issues after months of using it. How can I get back to stock?
Can anyone help please?
Ndaoud360 said:
Can anyone help please?
Click to expand...
Click to collapse
If its rebooting the phone and not into bootloader, the first things to check are: Make sure you're using the HTC cable, try a different usb port, and make sure you have all the correct drivers installed. Easiest way is to install htc sync, and then uninstall, It will leave the drivers behind and remove the sync software.
Hello, I need help. I tried to update my phone to a new ROM and now it is only booting in bootloader and says there is no OS. I have downloaded a RUU that matched, renamed it and put it on my microsd and tried to flash it but it reboots in TWRP. I have a backup and when I try to restore it says Restore Complete Failed---E: Cannot restore System -- mounted read only. I really love the M9 and want it back up and running can anyone please help me get it back functioning? It does not have fastboot option and adb server out of date. Pretty much a noob here. I have flashed other Roms before, but this M9 is proving to be a pain. I have been researching thread after thread and still no luck. Any help would greatly be appreciated.
Here is info on device:
htc_himawh1 PVT S-On
[email protected]
OS-1.32.651.30
OpenDSP-v22.2.6-00452-M8994_0318
**Software status: Modified**
***Unlocked***
***S-ON***
Ruu aint flashing cuz u have unlocked firmware. Search up how to relock bootloader. Btw, why not just install a rom? . One thing is u wont be able to root ur phone after relock.
EvoGuy2010 said:
Ruu aint flashing cuz u have unlocked firmware. Search up how to relock bootloader. Btw, why not just install a rom? . One thing is u wont be able to root ur phone after relock.
Click to expand...
Click to collapse
Thanks I figured I will look at how to relock the bootloader without fastboot. I honestly didn't think I could install a rom because I figured most needed MM7 and I dont have that installed which is what happened when I tried to install Viper Rom
Got it working again. I had to restore only the boot and system image. After it rebooted I then restored data and it's back to normal.
SirDeuce said:
Got it working again. I had to restore only the boot and system image. After it rebooted I then restored data and it's back to normal.
Click to expand...
Click to collapse
Can you please help me?
i woke up today and my phone died of charge. I plugged in the charger and tried to power up my phone. It was stuck in a bootloop. So, I went into recovery, wiped cache and dalvik cache, rebooted, and still didnt work.
I then went to wipe and did the thing where twrp asks to do a factory reset by wiping cache, dalvik cache, and data. Still didnt worl, so i took out the sd card and did it again. Still bootloops. So, i then wiped dalvik cahce, cache, system, and data. Now, my phone is stuck in the white HTC logo with red text. and twrp tells me there is no os installed, are you sure you want to continue? CAN SOMEONE PLEASE HELP ME WITH THIS! PLEASE PLEASE REPLY AS SOON AS POSSIBLE!
KingAirman said:
Can you please... Now, my phone is stuck in the white HTC logo with red text. and twrp tells me there is no os installed, are you sure you want to continue? CAN SOMEONE PLEASE HELP ME WITH THIS! PLEASE PLEASE REPLY AS SOON AS POSSIBLE!
Click to expand...
Click to collapse
Hey did you get it to work? Just seeing this post. If you backed up your system and boot images boot into twrp and flash those copies you made before the wipes. See where that gets ya. Hopefully you got it fixed by now.
A few days ago i got the massage "uid inconsistent feeling lucky" and after a couple of minutes my phone restarted and got stuck on the flashing samsung logo, i was on an official 4.3 rom rooted.
I decided that it's time to move to Lineage OS 7.1.1. I tried to enter twrp recovery that was installed on my device but got stuck on the twrp splash screen and after 2 seconds it reboots the device, i installed 7 different twrp versions 2.8.5.0 - 3.0.2-2 with odin but every time with the same result, stuck on twrp splash screen
So i tried to install a stock rom, after odin finished and the device rebooted it got stuck again on the flashing samsung logo and when i tried to enter the recovery that should be the stock recovery i got an android image with the red triangle and the phone reboots, when i tried to install stock recovery with odin it got stuck on file analysis.
After all that i downloaded cwm recovery and philz recovery and those were the only recovery i can access, i can delete cache and dalvik cache but when i try to wipe data/factory reset when i select the option the phone immediately reboots.
I also tried to install the Lineage OS 7.1.1 official rom with cwm but got an error massage "can't install this package on top of incompatible data. please try another package or run a factory reset".
Please help me
Is the phone encrypted? You confirmed the model # of the phone by booting into download mode?
audit13 said:
Is the phone encrypted? You confirmed the model # of the phone by booting into download mode?
Click to expand...
Click to collapse
The model # GT-I9300 shown in download mode, the phone isn't encryptd
Does the phone reboot when you put it into download mode?
audit13 said:
Does the phone reboot when you put it into download mode?
Click to expand...
Click to collapse
No, download mode works fine
When flashing a stock ROM, Odin gives no errors? Are you able to boot into stock recovery right after flashing a stock ROM?
audit13 said:
When flashing a stock ROM, Odin gives no errors? Are you able to boot into stock recovery right after flashing a stock ROM?
Click to expand...
Click to collapse
No errors in odin, when i try to enter stock recovery after flashing stock rom there is an android picture with red triangle and the phone reboots, the only problem that i had with odin is when i tried to flash only the stock recovery it got stuck on file analysis, in my first post i wrote all the things that i've tried already and what works and doesn't work
I'm at a loss as to what the problem could be. Have you thought about taking the phone to a cell repair shop to see if it can be flashed via JTAG?
audit13 said:
I'm at a loss as to what the problem could be. Have you thought about taking the phone to a cell repair shop to see if it can be flashed via JTAG?
Click to expand...
Click to collapse
this would be my last resort, where i live a shop would charge me more than the phone is worth to repair it, is there a way to factory reset with a software or adb with a phone that can't boot into the os?
The only way I know of is using stock or custom recovery.
audit13 said:
The only way I know of is using stock or custom recovery.
Click to expand...
Click to collapse
can it help if i check the re-partition or erase all nand option in odin?
You need a pit file in order to repartition.
Srgyoel said:
A few days ago i got the massage "uid inconsistent feeling lucky" and after a couple of minutes my phone restarted and got stuck on the flashing samsung logo, i was on an official 4.3 rom rooted.
I decided that it's time to move to Lineage OS 7.1.1. I tried to enter twrp recovery that was installed on my device but got stuck on the twrp splash screen and after 2 seconds it reboots the device, i installed 7 different twrp versions 2.8.5.0 - 3.0.2-2 with odin but every time with the same result, stuck on twrp splash screen
So i tried to install a stock rom, after odin finished and the device rebooted it got stuck again on the flashing samsung logo and when i tried to enter the recovery that should be the stock recovery i got an android image with the red triangle and the phone reboots, when i tried to install stock recovery with odin it got stuck on file analysis.
After all that i downloaded cwm recovery and philz recovery and those were the only recovery i can access, i can delete cache and dalvik cache but when i try to wipe data/factory reset when i select the option the phone immediately reboots.
I also tried to install the Lineage OS 7.1.1 official rom with cwm but got an error massage "can't install this package on top of incompatible data. please try another package or run a factory reset".
Please help me
Click to expand...
Click to collapse
The error you got means you need to wipe the /system partition before you flash Lineage. As for why TWRP isn't working, I'm really not too sure unless the image size is bigger than the actual recovery partition size.
audit13 said:
You need a pit file in order to repartition.
Click to expand...
Click to collapse
The PIT file depends on the phones model or on the rom version or both?
File depends on model number and the amount of internal memory. I think the 9300 has 16 GB.
RealWelder said:
The error you got means you need to wipe the /system partition before you flash Lineage. As for why TWRP isn't working, I'm really not too sure unless the image size is bigger than the actual recovery partition size.
Click to expand...
Click to collapse
the only recovery i can use is cwm or philz, but when i try to wipe data\factory reset the phone reboots right when i select the option and does not complete the wipe\reset, i wiped cache, dalvik cache and system partition, but when i try to install the rom it said incomplete data and i should do a factory reset and i can't do that, i had the latest twrp working before all of this happened
audit13 said:
File depends on model number and the amount of internal memory. I think the 9300 has 16 GB.
Click to expand...
Click to collapse
Thank you, i will try to download the file and re-partition in odin, that is the only thing i haven't tried yet
Is it possible the phone has 32 GB?
audit13 said:
Is it possible the phone has 32 GB?
Click to expand...
Click to collapse
My s3 has 16 gb
Noooo... Dont repartition it. You haven't had anything that says it needs it yet.
Flash the stock firmware twice, back to back then see if you have more control.
If you have a btu device (unlocked international) i can give you my reliable files to flash.
All you'll need for now is the firmware file. Flash it and as the phone reboots (blue pass in odin) you need to get it into download mode again without going to the os, if you miss it just pull the battery and go again.
Once in dl mode for the second time, flash the firmware again. When the phone reboots, before it goes to os, get in into RECOVERY MODE and try to factory wipe it. If successful allow it to reboot again as normal to os.
If the factory wipe fails or the phone still hangs at the samsung logo you have bigger issues.
Beamed in by telepathy.