Here's some of the problems that I am having....
1. When using phone, I occasionally cant hang up - whether I use the screen button or the pushbutton - the only thing that lets me end the call is a soft reset. Imagine!!!
2. Yesterday, for no reason, the ringtone for an incoming call played 2x faster than it should have (ie. the speed of the song was doubled)
3. Just after I notice the ringtone song issue, I tried to use voice dial, and the prompts for voice dial were also playing twice as fast, a soft reset seemed to have fixed the problem... lets see if it happens again.
4. After installing WM6 Crossbow Underground, I was having problems not getting ANY calls, so I upgraded the Radio Rom to 2.61.11 and it seemed to work, BUT then I started noticing that I was getting SOME CALLS AND NOT AL CALLS, so I switched back to 2.25.11 Radio Rom
5. Under Regional Settings > Time ...I tried to switch to 24HR mode and using it for a while, I went back in to revert back to the 12HR mode but it wouldn't let me switch back to 12 hour mode.
6. When I touch the screen to Turn ON Flight Mode (shut off the radio), and then touch the screen to Turn OFF the Flight Mode, the dialogue STILL says Turn ON Flight Mode, even though its already ON (it should change to say, Turn OFF Flight Mode).
7. I was just on the phone with someone when a text msg arrived, and it booted me off the call I was on (it hung up).
8. When on a call, I touched the Mute botton on the screen to MUTE the call, but when I tried to UNmute the call it wouldn't let me.
9. Did anyone notice that the SIMPLE LOCK (4 digits) now requires you to click on the unlock button after entering the code? WM5 didn't require this, if you entered the right 4 digits, you were in, without having to press anything else.
10. When I am on a call, and another call comes in (call waiting), I cannot answer or ignore the other call... it doesn't respond to me whether using the touchscreen or the buttons.
And there's MORE that I will post another time.
Any suggestions or solutions, to these problems?
Actually I would recomend you upgrade to Most Beautiful version
I used Underground version, and Office Mobile doesn't work too
Everything is ok here with MB (search with this and you'll find it in piratebay under applications) version
Where is the "Most beautiful edtion"?
ANTC said:
Where is the "Most beautiful edtion"?
Click to expand...
Click to collapse
Uhhhhh, I think he said "you'll find it in piratebay under applications" didn't he?
find it here
here you go link for the rom you want andmany others
http://rapidshare.com/users/EXGZ7T
do you still need to apply the battey leak patch and the other extra stuff you had to do with underground
Hallo!
I have a mysterious Problem:
When i make a call than is the Display on and active - I can activate the speaker an so on.
IF i get a call the Display is aktive so long as i take the call. Then the Display gets dark and inaktive. So it´s inpossible to activate speaker or others. Pressing ANY! Key is not succesfull, intead the right - but THEN, the Call is over...
I tried the system, two other SimCards, Regitry-Hacks, flashing other Rom´s!
Nothing solve this Problem....
Mysterious: After flashing a new SystemRom, one or two times ist works, but than it´s like before.
ALL other functions are OK, so a hardware-Problem is unrealistic.
The HTC-support has also no idea (change the SimCard....).
It is NO other Software installed and i tried the original ROM´s from T-Mobile (win6.5) and some other Rom´s (like Duttys).
WHAT can I do?
make sure there's nothing blocking the proximity sensor during the call.
1) Can't set the default ringtone. I can go into settings and select a ringtone but for some reason the defauls stays on silent. Have to set ringtone for each contact. If a non contact number calls, no ringtone just vibrate. FYI the power control widget only has two options, speaker with vibe lines and phone with vibe lines. nothing else.
2)With Update 4.0.4c moving from one remembered wifi connection to another I got an error in the menu. Can't turn wifi on at all. Restoring to original WB rom if this is a consistant problem.
Can someone give me some advice here?
Forever a noob
Re-installed rom for a 5th time. Installed doom kernal. Took care of the first problem. Have not updated to 4.0.4 c yet. Not sure if I want to now
When i got this device i thought how stupid this was and hoped after flashing a custom rom maybe it would eliminate this stupid feature of this device. It seems HTC thinks it's a good idea to turn the screen ON after ending a phone call, WTF?
At work i use my bluetooth headset all day with my phone in my pocket. I will take my phone out, dial the number i want to speak to, press power to turn screen off, put device in pocket and have my conversation. I end the phone conversation with my bluetooth headset and guess what? The dang phone's screen turns on while it is in my pocket. I guess the light sensor has zero effect here! So now since this happens and my device has a timeout of 2min i set before screen turns off my phone accidentally "butt dials" people and without me knowing i'm now calling people randomly while i'm working!
Another case. I have my phone in my car's cupholder, i use bluetooth to make a call with my car, it initiates the call to my phone and again it turns the screen ON to make the call. WHY? I never pressed power on my device to turn the screen on to make a call. So again i press the power button to turn screen off while in call. I hang up the call when i'm done via the bluetooth in my car and again the device turns the screen back ON once i disconnect the call via bluetooth.
I just don't understand the logic behind this? Is this some HTC thing or all android? Coming from iPhone 4 never had this issue so was a first for me with this device. Just don't see the reason or logic for this?
Anyway to prevent this or stop this from happening? I mean isn't that the point of bluetooth to not need to touch your device thus no need for the screen to be turned on????
+1
It seems that this is not a HTC thing because I have the same behavior on my Samsung device. Same problem as well with pocket dialing during/after a call. Really annoying. I had the same thing on my old HTC Nexus One running Froyo, so this is not a new bug. Back then I tried a lot of different apps, and none helped. I even flashed CyanogenMod on it and it didn't change anything.
I really hope someone has run across a fix whether it's an app, a patch or a whole new ROM, because pulling my phone out of my pocket to turn the screen back off TWICE for every call I make or receive is getting to be a pain.
I can't believe this behavior is voluntary on the part of the designers. If it is, please someone explain why.
You can use TASKER(automation app at Play Store ) to Get you screen off after a call or while connected to the bluetooth ..
ethanon said:
You can use TASKER(automation app at Play Store ) to Get you screen off after a call or while connected to the bluetooth ..
Click to expand...
Click to collapse
Just downloaded but no idea how to use this thing. Not very saavy with this type of stuff. How can I use tasker to turn the screen off when ending a call ONLY while connected to a Bluetooth headset? This is my biggie since it's in my pocket.
Got it to work
Ok, I downloaded Tasker and I'm impressed.
Here's how I got this to work:
1: Create new profile using STATE, then go to NET, then hit BLUETOOTH CONNECTED. Here you can specify if you want only a specific device or any Bluetooth.
2: Set new task: SET plsLock to ON
3: Set exit task: SET plsLock to OFF
4: Create new profile using EVENT, then go to PHONE, and hit PHONE OFFHOOK.
5: Set new task as: SCREEN, SYSTEM LOCK
6: Hit IF, and specify if plsLock is ON
7: Create new profile using EVENT, then go to PHONE, and hit PHONE IDLE.
8: Set new task as: SCREEN, SYSTEM LOCK
9: Hit IF, and specify if plsLock is ON.
You're done.
Since I had the same problem with the wired headset, I also created a profile with HARDWARE, HEADSET that sets the variable plsLock to ON and exit task sets it back to OFF. You can name the variable anything you want and it will still work.
If anyone has a better/simpler way of programming this, please share. I just started using this program and am still trying to wrap my head around the way this is structured.
As this stands, it works... But it's still a patch on something that should be an option in Android.
Let me know what you think.
Ok thank you I'll give it a try. Yeah could never understand why my device thinks it's a good idea to turn screen back on after ending a call via Bluetooth or not? I receive call, I then press power button to turn screen off bit continue my call, the caller hangs up, boom my screen turns on displaying the phone dialer until my time out settings turn screen off. Dumbest feature I swear. Hello phone I pressed power offbutton to turn screen off, get the hint and keep screen off until I press power button and want it back on again. No sense...
Deeznuts, did you manage to get it working with tasker ? I guess it is the only possible way to get to your objective. Learning Tasker will give a new dimension to your phone. More over I will try to make a profile for your and get working .
For some reading
http://www.pocketables.com/2013/06/...rt-0-tips-and-tricks-for-learning-tasker.html
ethanon said:
Deeznuts, did you manage to get it working with tasker ? I guess it is the only possible way to get to your objective. Learning Tasker will give a new dimension to your phone. More over I will try to make a profile for your and get working .
For some reading
http://www.pocketables.com/2013/06/...rt-0-tips-and-tricks-for-learning-tasker.html
Click to expand...
Click to collapse
No unfortunately not. I would greatly appreciate that! I would think it's a simple task but honestly I'm very handicapped when it's comes to stuff like this.
Basically a string for tasker that would simply just do this:
When my device is connected to a Bluetooth device whether it be my car kit, headset, stereo headset, etc. and a phone call ends where by me pressing the End Call on screen button, by ending call with car kit, headset, etc, doesn't matter but will make the screen turn off. That's it.
When connected via Bluetooth, a phone call ends, screen turns off.
Now here's a kicker and not sure if this part would be harder. I'm connected via Bluetooth headset or device, I have screen on to manually make a phone call, then while on the call I press the power button to turn screen off while on call and put device in my pocket. Now when the call eventually ends I would want the screen to stay off.
I will read into the link you provided and mess with it somewhere. Thank you for your time and help.
Correct me if I am wrong , you mean to say that no matter what you want your screen to stay off after a call ...
ethanon said:
Correct me if I am wrong , you mean to say that no matter what you want your screen to stay off after a call ...
Click to expand...
Click to collapse
Correct BUT only when connected to a Bluetooth device. My gripe is on a Bluetooth call, place a call manually then talk on headset, car kit, etc. I press power button to turn screen off then put phone back in pocket, when call ends the phone turns screen back on for some reason. Never understood this?
Hi,
I just installed Lineage Os on my P9000, seems to work more or less but I just noticed that I can't call, or even be called.
If either calling or being called is occuring the phone seem to restart, though not entirely.
After restarting i'm not asked for my pin, it's just back as if I just powered off my screen.
Any idea ?
Thanks.
EDIT : Problem solved, It was the Google Dialer which was the problem, just by going into the Parameters/Applications/Default Applications/Phone and then set the Dialer(the one present) as the default dialer.