[Q] Relocked tampered htc one max 2.49.0000 - HTC One Max

Hi , I'm new here and have a problem and need your help ,I have htc one max 2.49 , I have unlocked the bootloader and put a recovery on it , installed another rom and wiped out it from the internal sd card then I wiped the backup of rom , I became unable to install any rom from recovery mood , my phone stucked on the htc logo ,unable to enter to install any rom ,so I relocked it by adb commands and tried to install ruu rom by adb commands but failed ,so I want to know , could I unlock the bootloader again and install recovery and could i put the rom on the external sd card and install the rom from it , I really in great need to your help , and open to your suggestions.

infoooooooooooooo
C:\Cadb&fastboot>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.49.0000
INFOversion-baseband: 4T.27.3218.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.22.709.1
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA49GWG00110
INFOimei: 357311051562551
INFOmeid: 00000000000000
INFOproduct: t6ul
INFOplatform: HBOOT-8064
INFOmodelid: 0P3P52000
INFOcidnum: HTC__621
INFObattery-status: good
INFObattery-voltage: 3668mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e1af350
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.052s
Report Post

Are you able to Boot into twmp or fastboot?

Yes I solved the problem by flashing vipermax into ad micro card but the problem is the new Rom can't see my SIM ,so is there any solution s.

i need help too please
anwermes said:
Yes I solved the problem by flashing vipermax into ad micro card but the problem is the new Rom can't see my SIM ,so is there any solution s.
Click to expand...
Click to collapse
hello
i have the same problem too and now i am stuck in the booloader
i tried to flash and i tried many ways and nothing done
i need my phone to back - i was trying to root and i am now stuck in
so pleeeeeeeeeeeeeeeeaaaaaaaase if any body can help .
i have htc one max cid_621 i think it is a taiwan vergin
TAMPERED
RELOCKED
Security Warning
T6 UL
Hboot : 2.49.0000
os : 4.14.709.10
and here are a pictures
http://forum.xda-developers.com/picture.php?albumid=13547&pictureid=53921
https://img.xda-cdn.com/Dl3k53VjrqZ...4IPfTGFj-_ACL0B/w346-h461/20160825_025740.jpg
i hope any one can help

Related

Need help with a bricked device

Hi,
I really need help with my bricked Flyer.
I tried to install honeycomb on my Flyer followed the process described in the link below:
http://android.modaco.com/topic/345950-installing-honeycomb-on-your-flyer-the-complete-guide/
Now, I ended up with a working CM, new and UNLOCKED bootloader, and new radio, S-ON **but** device turns on to white HTC screen and stays on that state.
I tried to revert to genuine GB rom followed the process on this post:
http://forum.xda-developers.com/showthread.php?t=1257909
And now current device state is:
*** RELOCKED ***
FLYER PVT SHIP S-ON RL
HBOOT- 1.11.0006
MICROP- 0850
RADIO- 3821.08.00.26_M
eMMC-boot
I tried to RUU fastboot method using rom.img from RUU_Flyer_HC_S_HTC_WWE_3.10.405
And ended up with error 132 (signature issue)
I also tried to flash PG41IMG.zip (pulled out of RUU_Flyer_HC_S_HTC_WWE_3.10.405) using goldcard without success- same signature issue (wrong product ID)
Curent state- no ADB, no CM, only fast boot works...
I would appreciate any help getting back to a working Flyer.
Thanks!
motman said:
Hi,
I really need help with my bricked Flyer.
I tried to install honeycomb on my Flyer followed the process described in the link below:
http://android.modaco.com/topic/345950-installing-honeycomb-on-your-flyer-the-complete-guide/
Now, I ended up with a working CM, new and UNLOCKED bootloader, and new radio, S-ON **but** device turns on to white HTC screen and stays on that state.
I tried to revert to genuine GB rom followed the process on this post:
http://forum.xda-developers.com/showthread.php?t=1257909
And now current device state is:
*** RELOCKED ***
FLYER PVT SHIP S-ON RL
HBOOT- 1.11.0006
MICROP- 0850
RADIO- 3821.08.00.26_M
eMMC-boot
I tried to RUU fastboot method using rom.img from RUU_Flyer_HC_S_HTC_WWE_3.10.405
And ended up with error 132 (signature issue)
I also tried to flash PG41IMG.zip (pulled out of RUU_Flyer_HC_S_HTC_WWE_3.10.405) using goldcard without success- same signature issue (wrong product ID)
Curent state- no ADB, no CM, only fast boot works...
I would appreciate any help getting back to a working Flyer.
Thanks!
Click to expand...
Click to collapse
if you have RELOCKED, You can try your original PG41IMG.zip (GB) with Goldcard
Yeah, I made a goldcard but the problem is that the base version installed on my Fiyer is Wifi_1.36.1540.32 and I can not find this version's RUU file anyware... Am I scr**ed? or is there any way to get this RUU file?
motman said:
Yeah, I made a goldcard but the problem is that the base version installed on my Fiyer is Wifi_1.36.1540.32 and I can not find this version's RUU file anyware... Am I scr**ed? or is there any way to get this RUU file?
Click to expand...
Click to collapse
It seems you made your goldcard incorrect.
I created a new goldcard and confirmed that I made it correctly, copied 41IMG.zip from another WIFI rom but still no go... I'm getting CID incorrect error on HBOOT
motman said:
I created a new goldcard and confirmed that I made it correctly, copied 41IMG.zip from another WIFI rom but still no go... I'm getting CID incorrect error on HBOOT
Click to expand...
Click to collapse
have you branding Version? if yes: it can be image name is different. For example on my Flyer: IMG41DIAG.zip
No, this Flyer was purchased unbranded in BestBuy- US. I guess that the only free solution will be with 1.36.1540.32 RUU version which can not be found anywhere :-(
motman said:
No, this Flyer was purchased unbranded in BestBuy- US. I guess that the only free solution will be with 1.36.1540.32 RUU version which can not be found anywhere :-(
Click to expand...
Click to collapse
You can control your cid with
fastboot getvar cid
viera77 said:
You can control your cid with
fastboot getvar cid
Click to expand...
Click to collapse
Thanks!
I'll try fastboot getvar cid option next week and post my results.
OK, here are the results:
'fastboot getvar all' command:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.11.0006
(bootloader) version-baseband: 3821.08.00.26_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0850
(bootloader) version-main: 1.36.1540.32
(bootloader) serialno: HT15JJN00515
(bootloader) imei: 35519**********
(bootloader) product: flyer
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG4140000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3674mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 60a0efb2
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
Now, running this command:
fastboot oem writecid 11111111
Gives me the following error:
(bootloader) [ERR] Command error !
OKAY [ 0.016s]
finished. total time: 0.016s
What should I do next?
I'm echoing your cry for help. I'm in EXACTLY the same position. SOMEONE PLEASE HELP!
Managed to upgrade to HoneyComb
I managed to unbrick my flyer by redo all HoneyComb process using the link in my first post.
All of this could not happen without using the unlock_code.bin file I originally received from HTC to unlock the bootloader again! I used 'fastboot flash unlocktoken Unlock_code.bin' command then flashed the new CM recovery menu then HC custom rom zip file via CM.
The only step I could not bypass is S-ON due to a newer Hboot version (1.11.0006) which is not supported by Revolutionary yet.
I can live with that although I'm not able to downgrade to stock rom, my CID is still BS_US001. I wish I knew how to revert to the older supported Hboot in order to S-OFF.
I hope that helps.

[Q] My new htc is not working!!!!!

hi all,
Please help me out...
i brought new htc one x plus last week through eBay.
read few forum for rooting the devices and interested to do it.
first i tried to unlock the device and was successful of doing it.
then while doing rooting i got my pc rebooted.
now my phone is booting back..
then i installed twrp recovery, but i dont have a recovery.img, so that i can restore my phone.
can you suggest what to do?
my phone details:
HTC ONE X PLUS 64 GB
CID - 11111111
UNLOCKED S-OFF
HBOOT : 1.32
Radio: 1.204.103.14
When i connect my phone through USB, it shows in device manager under android device, but the phone storage is not displaying in the "My computer".
srikumaran89 said:
hi all,
Please help me out...
i brought new htc one x plus last week through eBay.
read few forum for rooting the devices and interested to do it.
first i tried to unlock the device and was successful of doing it.
then while doing rooting i got my pc rebooted.
now my phone is booting back..
then i installed twrp recovery, but i dont have a recovery.img, so that i can restore my phone.
can you suggest what to do?
my phone details:
HTC ONE X PLUS 64 GB
CID - 11111111
UNLOCKED S-OFF
HBOOT : 1.32
Radio: 1.204.103.14
When i connect my phone through USB, it shows in device manager under android device, but the phone storage is not displaying in the "My computer".
Click to expand...
Click to collapse
What is up with all these guys having S-OFF!! I WANT THAT S***!!
Erm, (Redo the Tie and brush my hair like nothing happened)
First of all do not worry, if you mean you have no ROM installed on your phone, then the easiest way to do it (most probably the only one too) is to "adb sideload" read the FAQs for a how to : http://forum.xda-developers.com/showthread.php?t=2179337
Secondly, what you want to do is look for a good old "stock recovery" which will be easy to find since you are S-OFF (bjabsfjsabfjsabjfgbsag)
Thirdly, in the off case that you don't find it which will be totally weird, you can RUU your phone.
Forthly if all else fails and you want your phone back working just fast, just flash a custom rom based on "Sense" , like ARHD or Viper X+ or Any other rom.
Best of luck mate ^^
Ghand0ur said:
What is up with all these guys having S-OFF!! I WANT THAT S***!!
Erm, (Redo the Tie and brush my hair like nothing happened)
First of all do not worry, if you mean you have no ROM installed on your phone, then the easiest way to do it (most probably the only one too) is to "adb sideload" read the FAQs for a how to : http://forum.xda-developers.com/showthread.php?t=2179337
Secondly, what you want to do is look for a good old "stock recovery" which will be easy to find since you are S-OFF (bjabsfjsabfjsabjfgbsag)
Thirdly, in the off case that you don't find it which will be totally weird, you can RUU your phone.
Forthly if all else fails and you want your phone back working just fast, just flash a custom rom based on "Sense" , like ARHD or Viper X+ or Any other rom.
Best of luck mate ^^
Click to expand...
Click to collapse
Thanks Ghand0ur!!!!!!!
I tried to sideload through TWRP 2.6 but the storage is showing only 47 MB, while mine phone as 64 GB internal storage.
Bcos of which the sideload got failed.
Then tried to download RUU for my phone, but got Error: 158... which means i have the wrong RUU
Can anyone help me get the correct RUU for the HTC one X Plus
my phone details:
HTC ONE X PLUS 64 GB
CID - 11111111
UNLOCKED S-OFF
HBOOT : 1.32
Radio: Initially 1.204.103.14(now showing as none)
version: 0.5a
version-bootloader: 1.32.0000
version-baseband: 1.1204.103.14
version-cpld: None
version-microp: None
version-main: 1.15.502.9
product: evitare_ul
platform: HBOOT-T30S
modelid: PM631****
cidnum: 11111111
battery-status: good
battery-voltage: 3727mV
devpower: 42
partition-layout: None
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
srikumaran89 said:
Thanks Ghand0ur!!!!!!!
I tried to sideload through TWRP 2.6 but the storage is showing only 47 MB, while mine phone as 64 GB internal storage.
Bcos of which the sideload got failed.
Then tried to download RUU for my phone, but got Error: 158... which means i have the wrong RUU
Can anyone help me get the correct RUU for the HTC one X Plus
my phone details:
HTC ONE X PLUS 64 GB
CID - 11111111
UNLOCKED S-OFF
HBOOT : 1.32
Radio: Initially 1.204.103.14(now showing as none)
version: 0.5a
version-bootloader: 1.32.0000
version-baseband: 1.1204.103.14
version-cpld: None
version-microp: None
version-main: 1.15.502.9
product: evitare_ul
platform: HBOOT-T30S
modelid: PM631****
cidnum: 11111111
battery-status: good
battery-voltage: 3727mV
devpower: 42
partition-layout: None
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
Click to expand...
Click to collapse
Inorder to flash an RUU you need to relock your Bootloader, but before that , you said you installed twrp, so you can boot into recovery and TWRP screen (install, wipe) ..etc shows up?

(SOLVED) Desire X hboot problem

Hi i need some help about "HTC Desire X PROTO" s-off,is it possiable???
my info is here
Code:
****UNLOCKED*****
PROTO PVT SHIP S-ON RL
HBOOT-1.25.0002
RADIO-1.15.40.04
emmc-boot
apr 22 2013,14:28:51:0
http://forum.xda-developers.com/showthread.php?t=2630531
xpirt
xpirt said:
http://forum.xda-developers.com/showthread.php?t=2630531
xpirt
Click to expand...
Click to collapse
Thanks for your Replay,But it can not help me,Actually My phone is not fully power ON,it is Only on Boot Screen,i can use only Fastboot.
Code:
INFOversion: 0.5
INFOversion-bootloader: 1.20.0000
INFOversion-baseband: 1.10.40.23
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.00.000.0
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT2A1LY11239
INFOimei: 358835041573301
INFOmeid:
INFOproduct: proto
INFOplatform: HBOOT-8225
INFOmodelid: PM6610000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: HTC
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-f3c065d3
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
finished. total time: 0.010s
How is it possible to have two different hboot
Post #1 :
HBOOT-1.25.0002
RADIO-1.15.40.04
Post #3 :
INFOversion-bootloader: 1.20.0000
INFOversion-baseband: 1.10.40.23
How to help without a proper/correct info ?
If it is 1.20.0000 you can simply solve your problem with a RUU.
ckpv5 said:
How is it possible to have two different hboot
Post #1 :
HBOOT-1.25.0002
RADIO-1.15.40.04
Post #3 :
INFOversion-bootloader: 1.20.0000
INFOversion-baseband: 1.10.40.23
How to help without a proper/correct info ?
If it is 1.20.0000 you can simply solve your problem with a RUU.
Click to expand...
Click to collapse
SORRY IT WAS MISTAKE FROM MY SIDE,THE ACTUAL IS
Code:
****UNLOCKED*****
PROTO PVT SHIP S-ON RL
HBOOT-1.20.0000
RADIO- 1.10.40.23
emmc-boot
apr 22 2013,14:28:51:0
ITS THE CURRENT POSITIN OF MY PHONE BUT BEFORE IT WAS
Code:
****UNLOCKED*****
PROTO PVT SHIP S-ON RL
HBOOT-1.25.0002
RADIO-1.15.40.04
emmc-boot
apr 22 2013,14:28:51:0
Actually it was caused after JTAG Rpairer,it was wrking well,i was trying to reapier IMEI and S-OFF with JTAG BOX,but now its only on BOOT Screen,i tr different types of RUU it always give me error "158" or "155".i try the following RUU
Code:
PM66IMG_PROTO_DUG_ICS_40A_HTCCN_CHS_CU_1.00.1402.8_R_Radio_10.11.45D.02_2M_10.20.45.26U_release_293272_signed
ruu_proto_u_ics_40a_htc_asia_wwe_1.14.707.1_radio_10.18.40.05u_1.09.45.201_release_284720_signed
RUU_PROTO_U_ICS_40A_HTC_Europe_1.14.401.1_Radio_10.18.40.05U_1.09.45.201_release_284072_signed
RUU_PROTO_U_ICS_40A_HTC_Europe_1.18.401.1_Radio_10.21.40.06U_1.10.40.23_release_295191_signed
APPLE-LINKS said:
i tr different types of RUU it always give me error "158" or "155".
Click to expand...
Click to collapse
Error 155 usually means the bootloader is not relocked before run the RUU.
For your case, you only can use the ruu_proto_u_ics_40a_htc_asia_wwe_1.14.707.1_radio_10.18.40.05u_1.09.45.201_release_284720_signed.exe because your hboot now is 1.20.0000 and CID HTC__044
So, what you need to do is :
1- in fastboot mode - relock the bootloader : run command fastboot oem lock
2- in fastboot mode - flash/run/double click the RUU; follow the updater instruction - next,update,bla,bla,bla until it finish
ckpv5 said:
Error 155 usually means the bootloader is not relocked before run the RUU.
For your case, you only can use the ruu_proto_u_ics_40a_htc_asia_wwe_1.14.707.1_radio_10.18.40.05u_1.09.45.201_release_284720_signed.exe because your hboot now is 1.20.0000 and CID HTC__044
So, what you need to do is :
1- in fastboot mode - relock the bootloader : run command fastboot oem lock
2- in fastboot mode - flash/run/double click the RUU; follow the updater instruction - next,update,bla,bla,bla until it finish
Click to expand...
Click to collapse
sorry for avian mistake,actually i could not post the full info afterJTAG repair,actually i reset cid to super cid,plz if you dont mind again give a look to my situation,what things are necessary to me.
thanks
Code:
< waiting for device >
INFOversion: 0.5
INFOversion-bootloader: 1.20.0000
INFOversion-baseband: 1.10.40.23
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT2A1LY11239
INFOimei: 353335041573307
INFOmeid:
INFOproduct: proto
INFOplatform: HBOOT-8225
INFOmodelid: PM6610000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: HTC
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-f3c065d3
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
finished. total time: 0.016s
APPLE-LINKS said:
i reset cid to super cid,plz if you dont mind again give a look to my situation,what things are necessary to me.
thanks
Click to expand...
Click to collapse
Even better with SuperCID, follow the same step as described above.
Most important is your hboot is 1.20.0000 and that's the only RUU available (two RUU actually, the other one is 1.14.401.1). And to run RUU the bootloader must be relocked.
Since it is SuperCID, it should run without CID matching to android-info.txt
Give it a try and follow the steps that I mentioned above and let me know the outcome.
When you need to unlock again, you need to reapply new unlock_code.bin
With SuperCID, if I'm not wrong you also can try the other RUU with a higher version hboot - RUU_PROTO_U_ICS_40A_HTC_Europe_1.18.401.1_Radio_10.21.40.06U_1.10.40.23_release_295191_signed.exe as it will update your hboot to 1.18.0000
Another option to have a working phone is :
Install TWRP recovery (or any recovery) for ICS, then install a custom ROM based on ICS and fastboot flash the ICS boot.img
Your problem now is actually is the hboot is a lower version which is ICS but you have a JB ROM so it can't boot. It will boot when all the boot.img, ROM and recovery are all ICS.
ckpv5 said:
Even better with SuperCID, follow the same step as described above.
Most important is your hboot is 1.20.0000 and that's the only RUU available (two RUU actually, the other one is 1.14.401.1). And to run RUU the bootloader must be relocked.
Since it is SuperCID, it should run without CID matching to android-info.txt
Give it a try and follow the steps that I mentioned above and let me know the outcome.
When you need to unlock again, you need to reapply new unlock_code.bin
With SuperCID, if I'm not wrong you also can try the other RUU with a higher version hboot - RUU_PROTO_U_ICS_40A_HTC_Europe_1.18.401.1_Radio_10.21.40.06U_1.10.40.23_release_295191_signed.exe as it will update your hboot to 1.18.0000
Another option to have a working phone is :
Install TWRP recovery (or any recovery) for ICS, then install a custom ROM based on ICS and fastboot flash the ICS boot.img
Your problem now is actually is the hboot is a lower version which is ICS but you have a JB ROM so it can't boot. It will boot when all the boot.img, ROM and recovery are all ICS.
Click to expand...
Click to collapse
Thanks for Your Kind INFO Now its working well,all-thing are going OK,do i need you Unlock Bootloader agian,or no need it?
APPLE-LINKS said:
Thanks for Your Kind INFO Now its working well,all-thing are going OK,do i need you Unlock Bootloader agian,or no need it?
Click to expand...
Click to collapse
Great :good::good:
To unlock bootloader again is your personal choice. You only need that if you need to install custom ROM, or root it and for whatever reason you may have. If you are happy with what you have, no need to do it.
Can you edit your title to (SOLVED) Desire X hboot problem instead of Desire X S-Off ?
HBoot Problem
My HBoot-1.20.0000
How i turn my hboot into1.25....................Please help
i do not understand how i do it.....
ridwone01 said:
My HBoot-1.20.0000
How i turn my hboot into1.25....................Please help
i do not understand how i do it.....
Click to expand...
Click to collapse
make sure u have stable internet connection.
from your phone, go to Settings -> About -> Update, check for update and wait till it finished and reboot.

Stuck in RUU Mode

Hi guys, I am by no means a noob but here's what happened. Maybe someone experienced can help me with this.
I was running the CM11 lastest nightly with the latest TWRP, S-ON when I decided I needed to go back to stock. So I locked the bootloader using fastboot oem lock after rebooting to the bootloader and since my phone was last on 3.24.531, that's the RUU I flashed (I remember now I didn't run it as administrator the first time). The RUU failed and it said that some partitions basically couldn't be flashed. Not the radio, but the userdata and system for example couldn't be flashed. It was able to flash boot though. I kept trying the RUU multiple times. At first it would keep failing the same way, but now I am stuck on the black HTC logo with the 4 triangles in the corners. I kept getting error 155 even though my bootloader is clearly relocked. Every time I reboot the phone manually it goes to the black HTC screen, and I have to insert and remove the USB cable in order to get to the bootloader RUU mode screen, but there's no option for fastboot. I can, however, seemingly unlock the bootloader and lock at my will and also flash recoveries (I still have my Unlock_code.bin and it does get accepted), but I can't get to them.
Now I have yet another problem, I can't charge the phone because I was about to try this RUU instead (5.14.531.1): http://www.htc.com/us/support/htc-one-t-mobile/news/ but now I get error 120. Any idea how I can get this thing to charge and how I can fix my problem once I get it charged more again? Thanks guys I'm kind of desperate here...
EDIT: Maybe another idea would be to format the partitions manually then re-run the RUU, because I was on CM11 4.4.4 and I was trying to reinstall the 4.3 T-Mobile RUU, and maybe they were confusingly formatted for the RUU? Idk.
Okay when I go to RUU mode looking at the bootloader screen and plug this thing into a charger, FASTBOOT AC lights up, but I can't tell if the phone is charging...is that one way to charge it?
EDIT2:fastboot getvar all output:
INFOversion: 0.5
INFOversion-bootloader: 1.55.0000
INFOversion-baseband: 4A.21.3263.03
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA34xxxxxxxx
INFOimei: 35xxxxxxxxxxxxx
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0713000
INFOcidnum: T-MOB010
INFObattery-status: good
INFObattery-voltage: 4051mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: RUU
INFOcommitno-bootloader: dirty-412e361e
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.048s
Alright, I solved it. Solutions were:
1. YES, fastboot ac does mean that the phone is charging
2. I ran the 5.14.531.1 RUU as administrator, and it worked. Cleared up all the triangles and flashed all the partitions successfully. All good.

[Solved] HTC Desire 601 Is stuck on the HTC Logo

Hey guys I tried to root my phone a while back and something happened and now its stuck on the HTC logo. I can still access bootloader alright though. This is what my phone says while in bootloader:
***TAMPERED***
***UNLOCKED***
ZARA_UL PVT SHIPS S-ON RL
HBOOT-2.22.0000
RADIO-1.26.40E.00.14
OpenDSP-v18.2.0268.0925
OS-2.14.661.3
eMMC-boot 1024MB
FEB 26 2014 12:27:49.0
how can I get out of it ?
c:\Fastboot>fastboot getvar all
< waiting for any device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.22.0000
(bootloader) version-baseband: 1.26.40e.00.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.14.661.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid:
(bootloader) product: zara_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: 0P4E23000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4255mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ae8bbb39
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Looks like you just need to try relocking the bootloader
Code:
fastboot oem lock
That will be the fastboot command you use.
MeniscusKing said:
Looks like you just need to try relocking the bootloader
Code:
fastboot oem lock
That will be the fastboot command you use.
Click to expand...
Click to collapse
I tried this maneuver to install the original ruu like indicated in this topic : http://forum.xda-developers.com/desire-601/general/collection-kitkat-ruu-t3228817 but unfortunately there's no ruu available for my version (2.14.661.3) and as my phone is S-ON I cannot downgrade or flash a different ruu.
Also I tried to restore a rom by twrp using this methode : http://forum.xda-developers.com/showpost.php?p=55220726&postcount=2 but it failed too.
Now I dunno if any custom rom for zara ul can be installed with S-ON, it seems the last hope
Nexting said:
I tried this maneuver to install the original ruu like indicated in this topic : http://forum.xda-developers.com/desire-601/general/collection-kitkat-ruu-t3228817 but unfortunately there's no ruu available for my version (2.14.661.3) and as my phone is S-ON I cannot downgrade or flash a different ruu.
Also I tried to restore a rom by twrp using this methode : http://forum.xda-developers.com/showpost.php?p=55220726&postcount=2 but it failed too.
Now I dunno if any custom rom for zara ul can be installed with S-ON, it seems the last hope
Click to expand...
Click to collapse
Have you tried installing this using TWRP?
I've used this one before just to have root and it's Zara UL
MeniscusKing said:
Have you tried installing this using TWRP?
I've used this one before just to have root and it's Zara UL
Click to expand...
Click to collapse
I finally get out of this by installing the same stock wit PhilZ Touch, although I guess the installation of STOCK_ODEX_ROOT_HTC_ZARA_UL_601_2.14.1401.86_v.1.0.1.zip before using TWRP was necessary for me
Now I got S-OFF using rumrunner and a new RUU moving to supercid :good:
Thank's for your help
Nexting said:
I tried this maneuver to install the original ruu like indicated in this topic : http://forum.xda-developers.com/desire-601/general/collection-kitkat-ruu-t3228817 but unfortunately there's no ruu available for my version (2.14.661.3) and as my phone is S-ON I cannot downgrade or flash a different ruu.
Also I tried to restore a rom by twrp using this methode : http://forum.xda-developers.com/showpost.php?p=55220726&postcount=2 but it failed too.
Now I dunno if any custom rom for zara ul can be installed with S-ON, it seems the last hope [/Q]
Have you by any chance managed to get S-OFF while your phone was bricked?
Click to expand...
Click to collapse
I need a rom 2.15.557.3 Zara_cl
hey! I need a rom 2.15.557.3 Zara_cl
But I can not find it on the internet! Can someone please upload it? My zara_cl is without OS, S-ON and I can not flash any other.

Categories

Resources